public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [edk2-devel] [PATCH v1 1/1] ArmVirtPkg/PlatformCI/ReadMe.md: Update contents
@ 2023-10-30 23:09 Michael Kubacki
  2023-10-31 12:23 ` Laszlo Ersek
  0 siblings, 1 reply; 5+ messages in thread
From: Michael Kubacki @ 2023-10-30 23:09 UTC (permalink / raw)
  To: devel
  Cc: Ard Biesheuvel, Gerd Hoffmann, Julien Grall, Leif Lindholm,
	Sami Mujawar

From: Michael Kubacki <michael.kubacki@microsoft.com>

Since the code is most regularly tested in CI, distro/versioning
details are updated to match the latest CI configuration.

CI has moved from Ubuntu 18.04 to Ubuntu 22.04 since the time of the
file's creation, but the code is actually built in a Fedora container
so Fedora is mentioned as the primary build/test environment.

Updates the following information:

- Build OS: Fedora 37 Linux
- Supported Configuration: Additional DSCs added
- Python: 3.12.x
- Packaging Tool: dnf instead of apt
- Container Details: Added
- Primary Build Example: QemuBuild.py instead of PlatformBuild.py

Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
---

Notes:
    I don't use ArmVirtPkg that often. I was reviewing the
    file for the latest build instructions and realized it
    was quite out of date, leading to this patch.
    
    The project is using Python 3.11.x right now, but a
    patch is going in the next day or so that has shown
    Python 3.12 will work:
    https://edk2.groups.io/g/devel/message/110323
    
    So I went ahead and made the Python version in this
    patch mention 3.12.x.

 ArmVirtPkg/PlatformCI/ReadMe.md | 53 +++++++++++++-------
 1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/ArmVirtPkg/PlatformCI/ReadMe.md b/ArmVirtPkg/PlatformCI/ReadMe.md
index ee8d8cd61e73..c0f2b2a43b3c 100644
--- a/ArmVirtPkg/PlatformCI/ReadMe.md
+++ b/ArmVirtPkg/PlatformCI/ReadMe.md
@@ -5,28 +5,43 @@ to use the same Pytools based build infrastructure locally.
 
 ## Supported Configuration Details
 
-This solution for building and running ArmVirtPkg has only been validated with Ubuntu
-18.04 and the GCC5 toolchain. Two different firmware builds are supported and are
-described below.
+This solution for building and running ArmVirtPkg has been validated with Fedora
+37 Linux and the GCC5 toolchain. Two different firmware builds are supported
+and are described below.
 
-| Configuration name      | Architecture       | DSC File         |Additional Flags |
-| :----------             | :-----             | :-----           | :----           |
-| AARCH64                 | AARCH64            | ArmVirtQemu.dsc  | None            |
-| ARM                     | ARM                | ArmVirtQemu.dsc  | None            |
+| Configuration name      | Architecture       | DSC File               | Additional Flags |
+| :----------             | :-----             | :-----                 | :----            |
+| AARCH64 - KVM Cloud HV  | AARCH64            | ArmVirtCloudHv.dsc     | None             |
+| ARM - KVM Cloud HV      | ARM                | ArmVirtCloudHv.dsc     | None             |
+| AARCH64 - kvmtool       | AARCH64            | ArmVirtKvmTool.dsc     | None             |
+| ARM - kvmtool           | ARM                | ArmVirtKvmTool.dsc     | None             |
+| AARCH64 - QEMU          | AARCH64            | ArmVirtQemu.dsc        | None             |
+| ARM - QEMU              | ARM                | ArmVirtQemu.dsc        | None             |
+| AARCH64 - QEMU Kernel   | AARCH64            | ArmVirtQemuKernel.dsc  | None             |
+| ARM - QEMU Kernel       | ARM                | ArmVirtQemuKernel.dsc  | None             |
+| AARCH64 - Xen HV        | AARCH64            | ArmVirtXen.dsc         | None             |
+| ARM - Xen HV            | ARM                | ArmVirtXen.dsc         | None             |
 
 ## EDK2 Developer environment
 
-- [Python 3.8.x - Download & Install](https://www.python.org/downloads/)
+- [Python 3.12.x - Download & Install](https://www.python.org/downloads/)
 - [GIT - Download & Install](https://git-scm.com/download/)
 - [QEMU - Download, Install, and add to your path](https://www.qemu.org/download/)
 - [Edk2 Source](https://github.com/tianocore/edk2)
-- Additional packages found necessary for Ubuntu 18.04
-  - apt-get install gcc g++ make uuid-dev
+- Additional packages found necessary for Fedora Linux 37
+  - dnf install gcc g++ make libuuid-devel
 
 Note: edksetup, Submodule initialization and manual installation of NASM, iASL, or
 the required cross-compiler toolchains are **not** required, this is handled by the
 Pytools build system.
 
+The code is built in CI using a container. The latest Fedora Linux 37 container is
+available in this GitHub container registry feed
+[fedora-37-test](https://github.com/tianocore/containers/pkgs/container/containers%2Ffedora-37-test).
+
+The exact container version tested in CI is maintained in this file
+[edk2/.azurepipelines/templates/default.yml](https://github.com/tianocore/edk2/blob/HEAD/.azurepipelines/templates/defaults.yml).
+
 ## Building with Pytools for ArmVirtPkg
 
 If you are unfamiliar with Pytools, it is recommended to first read through
@@ -57,16 +72,16 @@ the generic set of edk2 [Build Instructions](https://github.com/tianocore/tianoc
     pip install --upgrade -r pip-requirements.txt
     ```
 
-4. Initialize & Update Submodules - only when submodules updated
+4. Initialize & Update Submodules - only when submodules updated (QEMU build example)
 
     ``` bash
-    stuart_setup -c ArmVirtPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+    stuart_setup -c ArmVirtPkg/PlatformCI/QemuBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
     ```
 
-5. Initialize & Update Dependencies - only as needed when ext_deps change
+5. Initialize & Update Dependencies - only as needed when ext_deps change (QEMU build example)
 
     ``` bash
-    stuart_update -c ArmVirtPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+    stuart_update -c ArmVirtPkg/PlatformCI/QemuBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
     ```
 
 6. Compile the basetools if necessary - only when basetools C source files change
@@ -75,13 +90,13 @@ the generic set of edk2 [Build Instructions](https://github.com/tianocore/tianoc
     python BaseTools/Edk2ToolsBuild.py -t <ToolChainTag>
     ```
 
-7. Compile Firmware
+7. Compile Firmware (QEMU build example)
 
     ``` bash
-    stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
+    stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>
     ```
 
-    - use `stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py -h` option to see additional
+    - use `stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py -h` option to see additional
     options like `--clean`
 
 8. Running Emulator
@@ -90,7 +105,7 @@ the generic set of edk2 [Build Instructions](https://github.com/tianocore/tianoc
     - or use the `--FlashOnly` feature to just run the emulator.
 
       ``` bash
-      stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH> --FlashOnly
+      stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH> --FlashOnly
       ```
 
 ### Notes
@@ -120,7 +135,7 @@ command-line. _stuart_build_ currently requires values to be assigned, so add an
 For example, to enable the TPM2 support, instead of the traditional "-D TPM2_ENABLE=TRUE", the stuart_build
 command-line would be:
 
-`stuart_build -c ArmVirtPkg/PlatformCI/PlatformBuild.py BLD_*_TPM2_ENABLE=TRUE`
+`stuart_build -c ArmVirtPkg/PlatformCI/QemuBuild.py BLD_*_TPM2_ENABLE=TRUE`
 
 ## References
 
-- 
2.42.0.windows.2



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#110348): https://edk2.groups.io/g/devel/message/110348
Mute This Topic: https://groups.io/mt/102287336/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-



^ permalink raw reply related	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2023-10-31 15:26 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-30 23:09 [edk2-devel] [PATCH v1 1/1] ArmVirtPkg/PlatformCI/ReadMe.md: Update contents Michael Kubacki
2023-10-31 12:23 ` Laszlo Ersek
2023-10-31 13:43   ` Laszlo Ersek
2023-10-31 15:25     ` Laszlo Ersek
2023-10-31 15:15   ` Michael Kubacki

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox