Re: [PATCH v2] ArmVirtPkg: Fix various typos

[Laszlo Ersek <lersek@redhat.com>]

On 02/06/19 16:48, Antoine Coeur wrote:
> Fix various typos in ArmVirtPkg.
> 
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Coeur <coeur@gmx.fr>
> ---
>  ArmVirtPkg/ArmVirt.dsc.inc                                  | 2 +-
>  ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c                | 2 +-
>  ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c | 4 ++--
>  .../FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c      | 6 +++---
>  .../Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c   | 6 +++---
>  ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c      | 4 ++--
>  6 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
> index c47955be94..304a4b4d21 100644
> --- a/ArmVirtPkg/ArmVirt.dsc.inc
> +++ b/ArmVirtPkg/ArmVirt.dsc.inc
> @@ -333,7 +333,7 @@
>    # Values are in EFI Pages (4K). DXE Core will make sure that
>    # at least this much of each type of memory can be allocated
>    # from a single memory range. This way you only end up with
> -  # maximum of two fragements for each type in the memory map
> +  # maximum of two fragments for each type in the memory map
>    # (the memory used, and the free memory that was prereserved
>    # but not used).
>    #
> diff --git a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
> index 73a0fbd8a4..758bc91ab1 100644
> --- a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
> +++ b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
> @@ -1,5 +1,5 @@
>  /** @file
> -  HOB Library implemenation for Dxe Phase with DebugLib dependency removed
> +  HOB Library implementation for Dxe Phase with DebugLib dependency removed
>  
>  Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
>  Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
> diff --git a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
> index 6479f53b37..a083826bab 100644
> --- a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
> +++ b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
> @@ -1238,7 +1238,7 @@ PciExpressBitFieldAndThenOr32 (
>    Size into the buffer specified by Buffer. This function only allows the PCI
>    configuration registers from a single PCI function to be read. Size is
>    returned. When possible 32-bit PCI configuration read cycles are used to read
> -  from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
> +  from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
>    and 16-bit PCI configuration read cycles may be used at the beginning and the
>    end of the range.
>  
> @@ -1338,7 +1338,7 @@ PciExpressReadBuffer (
>    Size from the buffer specified by Buffer. This function only allows the PCI
>    configuration registers from a single PCI function to be written. Size is
>    returned. When possible 32-bit PCI configuration write cycles are used to
> -  write from StartAdress to StartAddress + Size. Due to alignment restrictions,
> +  write from StartAddress to StartAddress + Size. Due to alignment restrictions,
>    8-bit and 16-bit PCI configuration write cycles may be used at the beginning
>    and the end of the range.
>  
> diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
> index f0924dacbc..16c0e61816 100644
> --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
> +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
> @@ -234,13 +234,13 @@ SerialPortGetControl (
>  }
>  
>  /**
> -  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
> +  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
>    data bits, and stop bits on a serial device.
>  
>    @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
>                              device's default interface speed.
>                              On output, the value actually set.
> -  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
> +  @param ReceiveFifoDepth   The requested depth of the FIFO on the receive side of the
>                              serial interface. A ReceiveFifoDepth value of 0 will use
>                              the device's default FIFO depth.
>                              On output, the value actually set.
> @@ -253,7 +253,7 @@ SerialPortGetControl (
>                              DefaultParity will use the device's default parity value.
>                              On output, the value actually set.
>    @param DataBits           The number of data bits to use on the serial device. A DataBits
> -                            vaule of 0 will use the device's default data bit setting.
> +                            value of 0 will use the device's default data bit setting.
>                              On output, the value actually set.
>    @param StopBits           The number of stop bits to use on this serial device. A StopBits
>                              value of DefaultStopBits will use the device's default number of
> diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
> index 8b736fd11f..2f10fb7b91 100644
> --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
> +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
> @@ -156,13 +156,13 @@ SerialPortPoll (
>  }
>  
>  /**
> -  Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
> +  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
>    data bits, and stop bits on a serial device.
>  
>    @param BaudRate           The requested baud rate. A BaudRate value of 0 will use the
>                              device's default interface speed.
>                              On output, the value actually set.
> -  @param ReveiveFifoDepth   The requested depth of the FIFO on the receive side of the
> +  @param ReceiveFifoDepth   The requested depth of the FIFO on the receive side of the
>                              serial interface. A ReceiveFifoDepth value of 0 will use
>                              the device's default FIFO depth.
>                              On output, the value actually set.
> @@ -175,7 +175,7 @@ SerialPortPoll (
>                              DefaultParity will use the device's default parity value.
>                              On output, the value actually set.
>    @param DataBits           The number of data bits to use on the serial device. A DataBits
> -                            vaule of 0 will use the device's default data bit setting.
> +                            value of 0 will use the device's default data bit setting.
>                              On output, the value actually set.
>    @param StopBits           The number of stop bits to use on this serial device. A StopBits
>                              value of DefaultStopBits will use the device's default number of
> diff --git a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
> index bb07f5e22b..534357eff4 100644
> --- a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
> +++ b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
> @@ -779,11 +779,11 @@ PlatformBootManagerBeforeConsole (
>    Do the platform specific action after the console is ready
>    Possible things that can be done in PlatformBootManagerAfterConsole:
>    > Console post action:
> -    > Dynamically switch output mode from 100x31 to 80x25 for certain senarino
> +    > Dynamically switch output mode from 100x31 to 80x25 for certain scenario
>      > Signal console ready platform customized event
>    > Run diagnostics like memory testing
>    > Connect certain devices
> -  > Dispatch aditional option roms
> +  > Dispatch additional option roms
>    > Special boot: e.g.: USB boot, enter UI
>  **/
>  VOID
> 

Reviewed-by: Laszlo Ersek <lersek@redhat.com>