* [Patch] BaseTools: Fix GenSec GCC make failure
@ 2017-12-05 13:54 Yonghong Zhu
2017-12-05 14:14 ` Leif Lindholm
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Yonghong Zhu @ 2017-12-05 13:54 UTC (permalink / raw)
To: edk2-devel; +Cc: Liming Gao, Leif Lindholm
It is a regression bug introduced by the patch b37b108, it cause GenSec
make failure on GCC Env.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
---
BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
index 2b2def1..5545f12 100644
--- a/BaseTools/Source/C/GenSec/GenSec.c
+++ b/BaseTools/Source/C/GenSec/GenSec.c
@@ -1324,11 +1324,11 @@ Returns:
// Open file and read contents
//
DummyFile = fopen (LongFilePath (DummyFileName), "rb");
if (DummyFile == NULL) {
Error (NULL, 0, 0001, "Error opening file", DummyFileName);
- return EFI_ABORTED;
+ goto Finish;
}
fseek (DummyFile, 0, SEEK_END);
DummyFileSize = ftell (DummyFile);
fseek (DummyFile, 0, SEEK_SET);
@@ -1338,22 +1338,22 @@ Returns:
DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned) DummyFileSize);
InFile = fopen(LongFilePath(InputFileName[0]), "rb");
if (InFile == NULL) {
Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
- return EFI_ABORTED;
+ goto Finish;
}
fseek (InFile, 0, SEEK_END);
InFileSize = ftell (InFile);
fseek (InFile, 0, SEEK_SET);
InFileBuffer = (UINT8 *) malloc (InFileSize);
fread(InFileBuffer, 1, InFileSize, InFile);
fclose(InFile);
DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned) InFileSize);
if (InFileSize > DummyFileSize){
- if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
+ if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
SectGuidHeaderLength = InFileSize - DummyFileSize;
}
}
if (SectGuidHeaderLength == 0) {
SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
--
2.6.1.windows.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Patch] BaseTools: Fix GenSec GCC make failure
2017-12-05 13:54 [Patch] BaseTools: Fix GenSec GCC make failure Yonghong Zhu
@ 2017-12-05 14:14 ` Leif Lindholm
2017-12-05 14:50 ` Leif Lindholm
2017-12-05 14:58 ` Gao, Liming
2017-12-05 18:19 ` Laszlo Ersek
2 siblings, 1 reply; 6+ messages in thread
From: Leif Lindholm @ 2017-12-05 14:14 UTC (permalink / raw)
To: Yonghong Zhu; +Cc: edk2-devel, Liming Gao
On Tue, Dec 05, 2017 at 09:54:59PM +0800, Yonghong Zhu wrote:
> It is a regression bug introduced by the patch b37b108, it cause GenSec
> make failure on GCC Env.
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
I can confirm this resolves my issue - pick either or both of:
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Thanks!
> ---
> BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
> index 2b2def1..5545f12 100644
> --- a/BaseTools/Source/C/GenSec/GenSec.c
> +++ b/BaseTools/Source/C/GenSec/GenSec.c
> @@ -1324,11 +1324,11 @@ Returns:
> // Open file and read contents
> //
> DummyFile = fopen (LongFilePath (DummyFileName), "rb");
> if (DummyFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", DummyFileName);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (DummyFile, 0, SEEK_END);
> DummyFileSize = ftell (DummyFile);
> fseek (DummyFile, 0, SEEK_SET);
> @@ -1338,22 +1338,22 @@ Returns:
> DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned) DummyFileSize);
>
> InFile = fopen(LongFilePath(InputFileName[0]), "rb");
> if (InFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (InFile, 0, SEEK_END);
> InFileSize = ftell (InFile);
> fseek (InFile, 0, SEEK_SET);
> InFileBuffer = (UINT8 *) malloc (InFileSize);
> fread(InFileBuffer, 1, InFileSize, InFile);
> fclose(InFile);
> DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned) InFileSize);
> if (InFileSize > DummyFileSize){
> - if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
> + if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
> SectGuidHeaderLength = InFileSize - DummyFileSize;
> }
> }
> if (SectGuidHeaderLength == 0) {
> SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
> --
> 2.6.1.windows.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Patch] BaseTools: Fix GenSec GCC make failure
2017-12-05 14:14 ` Leif Lindholm
@ 2017-12-05 14:50 ` Leif Lindholm
2017-12-05 14:58 ` Gao, Liming
0 siblings, 1 reply; 6+ messages in thread
From: Leif Lindholm @ 2017-12-05 14:50 UTC (permalink / raw)
To: Yonghong Zhu; +Cc: edk2-devel, Liming Gao
On Tue, Dec 05, 2017 at 02:14:26PM +0000, Leif Lindholm wrote:
> On Tue, Dec 05, 2017 at 09:54:59PM +0800, Yonghong Zhu wrote:
> > It is a regression bug introduced by the patch b37b108, it cause GenSec
> > make failure on GCC Env.
> >
> > Cc: Liming Gao <liming.gao@intel.com>
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
>
> I can confirm this resolves my issue - pick either or both of:
> Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Although thinking about it, it would still make sense for the
ENCODE_ERROR macro in BaseTools/Source/C/Include/Common/BaseTypes.h to
mimic the one in MdePkg/Include/Base.h:
diff --git a/BaseTools/Source/C/Include/Common/BaseTypes.h
b/BaseTools/Source/C/Include/Common/BaseTypes.h
index 198647ab95..5fa4e560d8 100644
--- a/BaseTools/Source/C/Include/Common/BaseTypes.h
+++ b/BaseTools/Source/C/Include/Common/BaseTypes.h
@@ -170,12 +170,12 @@
// EFI Error Codes common to all execution phases
//
-typedef INTN RETURN_STATUS;
+typedef UINTN RETURN_STATUS;
///
/// Set the upper bit to indicate EFI Error.
///
-#define ENCODE_ERROR(a) (MAX_BIT | (a))
+#define ENCODE_ERROR(a) ((RETURN_STATUS)(MAX_BIT | (a)))
#define ENCODE_WARNING(a) (a)
#define RETURN_ERROR(a) ((a) < 0)
Should I send this as a separate patch?
/
Leif
> Thanks!
>
> > ---
> > BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
> > index 2b2def1..5545f12 100644
> > --- a/BaseTools/Source/C/GenSec/GenSec.c
> > +++ b/BaseTools/Source/C/GenSec/GenSec.c
> > @@ -1324,11 +1324,11 @@ Returns:
> > // Open file and read contents
> > //
> > DummyFile = fopen (LongFilePath (DummyFileName), "rb");
> > if (DummyFile == NULL) {
> > Error (NULL, 0, 0001, "Error opening file", DummyFileName);
> > - return EFI_ABORTED;
> > + goto Finish;
> > }
> >
> > fseek (DummyFile, 0, SEEK_END);
> > DummyFileSize = ftell (DummyFile);
> > fseek (DummyFile, 0, SEEK_SET);
> > @@ -1338,22 +1338,22 @@ Returns:
> > DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned) DummyFileSize);
> >
> > InFile = fopen(LongFilePath(InputFileName[0]), "rb");
> > if (InFile == NULL) {
> > Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
> > - return EFI_ABORTED;
> > + goto Finish;
> > }
> >
> > fseek (InFile, 0, SEEK_END);
> > InFileSize = ftell (InFile);
> > fseek (InFile, 0, SEEK_SET);
> > InFileBuffer = (UINT8 *) malloc (InFileSize);
> > fread(InFileBuffer, 1, InFileSize, InFile);
> > fclose(InFile);
> > DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned) InFileSize);
> > if (InFileSize > DummyFileSize){
> > - if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
> > + if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
> > SectGuidHeaderLength = InFileSize - DummyFileSize;
> > }
> > }
> > if (SectGuidHeaderLength == 0) {
> > SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
> > --
> > 2.6.1.windows.1
> >
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Patch] BaseTools: Fix GenSec GCC make failure
2017-12-05 14:50 ` Leif Lindholm
@ 2017-12-05 14:58 ` Gao, Liming
0 siblings, 0 replies; 6+ messages in thread
From: Gao, Liming @ 2017-12-05 14:58 UTC (permalink / raw)
To: Leif Lindholm, Zhu, Yonghong; +Cc: edk2-devel@lists.01.org
Leif:
I suggest to create another patch for it.
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Leif Lindholm
> Sent: Tuesday, December 5, 2017 10:51 PM
> To: Zhu, Yonghong <yonghong.zhu@intel.com>
> Cc: edk2-devel@lists.01.org; Gao, Liming <liming.gao@intel.com>
> Subject: Re: [edk2] [Patch] BaseTools: Fix GenSec GCC make failure
>
> On Tue, Dec 05, 2017 at 02:14:26PM +0000, Leif Lindholm wrote:
> > On Tue, Dec 05, 2017 at 09:54:59PM +0800, Yonghong Zhu wrote:
> > > It is a regression bug introduced by the patch b37b108, it cause GenSec
> > > make failure on GCC Env.
> > >
> > > Cc: Liming Gao <liming.gao@intel.com>
> > > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
> >
> > I can confirm this resolves my issue - pick either or both of:
> > Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
> > Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
>
> Although thinking about it, it would still make sense for the
> ENCODE_ERROR macro in BaseTools/Source/C/Include/Common/BaseTypes.h to
> mimic the one in MdePkg/Include/Base.h:
>
> diff --git a/BaseTools/Source/C/Include/Common/BaseTypes.h
> b/BaseTools/Source/C/Include/Common/BaseTypes.h
> index 198647ab95..5fa4e560d8 100644
> --- a/BaseTools/Source/C/Include/Common/BaseTypes.h
> +++ b/BaseTools/Source/C/Include/Common/BaseTypes.h
> @@ -170,12 +170,12 @@
> // EFI Error Codes common to all execution phases
> //
>
> -typedef INTN RETURN_STATUS;
> +typedef UINTN RETURN_STATUS;
>
> ///
> /// Set the upper bit to indicate EFI Error.
> ///
> -#define ENCODE_ERROR(a) (MAX_BIT | (a))
> +#define ENCODE_ERROR(a) ((RETURN_STATUS)(MAX_BIT | (a)))
>
> #define ENCODE_WARNING(a) (a)
> #define RETURN_ERROR(a) ((a) < 0)
>
>
> Should I send this as a separate patch?
>
> /
> Leif
>
> > Thanks!
> >
> > > ---
> > > BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
> > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
> > > index 2b2def1..5545f12 100644
> > > --- a/BaseTools/Source/C/GenSec/GenSec.c
> > > +++ b/BaseTools/Source/C/GenSec/GenSec.c
> > > @@ -1324,11 +1324,11 @@ Returns:
> > > // Open file and read contents
> > > //
> > > DummyFile = fopen (LongFilePath (DummyFileName), "rb");
> > > if (DummyFile == NULL) {
> > > Error (NULL, 0, 0001, "Error opening file", DummyFileName);
> > > - return EFI_ABORTED;
> > > + goto Finish;
> > > }
> > >
> > > fseek (DummyFile, 0, SEEK_END);
> > > DummyFileSize = ftell (DummyFile);
> > > fseek (DummyFile, 0, SEEK_SET);
> > > @@ -1338,22 +1338,22 @@ Returns:
> > > DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned)
> DummyFileSize);
> > >
> > > InFile = fopen(LongFilePath(InputFileName[0]), "rb");
> > > if (InFile == NULL) {
> > > Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
> > > - return EFI_ABORTED;
> > > + goto Finish;
> > > }
> > >
> > > fseek (InFile, 0, SEEK_END);
> > > InFileSize = ftell (InFile);
> > > fseek (InFile, 0, SEEK_SET);
> > > InFileBuffer = (UINT8 *) malloc (InFileSize);
> > > fread(InFileBuffer, 1, InFileSize, InFile);
> > > fclose(InFile);
> > > DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned)
> InFileSize);
> > > if (InFileSize > DummyFileSize){
> > > - if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
> > > + if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
> > > SectGuidHeaderLength = InFileSize - DummyFileSize;
> > > }
> > > }
> > > if (SectGuidHeaderLength == 0) {
> > > SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
> > > --
> > > 2.6.1.windows.1
> > >
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Patch] BaseTools: Fix GenSec GCC make failure
2017-12-05 13:54 [Patch] BaseTools: Fix GenSec GCC make failure Yonghong Zhu
2017-12-05 14:14 ` Leif Lindholm
@ 2017-12-05 14:58 ` Gao, Liming
2017-12-05 18:19 ` Laszlo Ersek
2 siblings, 0 replies; 6+ messages in thread
From: Gao, Liming @ 2017-12-05 14:58 UTC (permalink / raw)
To: Zhu, Yonghong, edk2-devel@lists.01.org; +Cc: Leif Lindholm
Reviewed-by: Liming Gao <liming.gao@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Yonghong Zhu
> Sent: Tuesday, December 5, 2017 9:55 PM
> To: edk2-devel@lists.01.org
> Cc: Leif Lindholm <leif.lindholm@linaro.org>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [Patch] BaseTools: Fix GenSec GCC make failure
>
> It is a regression bug introduced by the patch b37b108, it cause GenSec
> make failure on GCC Env.
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
> ---
> BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
> index 2b2def1..5545f12 100644
> --- a/BaseTools/Source/C/GenSec/GenSec.c
> +++ b/BaseTools/Source/C/GenSec/GenSec.c
> @@ -1324,11 +1324,11 @@ Returns:
> // Open file and read contents
> //
> DummyFile = fopen (LongFilePath (DummyFileName), "rb");
> if (DummyFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", DummyFileName);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (DummyFile, 0, SEEK_END);
> DummyFileSize = ftell (DummyFile);
> fseek (DummyFile, 0, SEEK_SET);
> @@ -1338,22 +1338,22 @@ Returns:
> DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned)
> DummyFileSize);
>
> InFile = fopen(LongFilePath(InputFileName[0]), "rb");
> if (InFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (InFile, 0, SEEK_END);
> InFileSize = ftell (InFile);
> fseek (InFile, 0, SEEK_SET);
> InFileBuffer = (UINT8 *) malloc (InFileSize);
> fread(InFileBuffer, 1, InFileSize, InFile);
> fclose(InFile);
> DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned)
> InFileSize);
> if (InFileSize > DummyFileSize){
> - if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
> + if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
> SectGuidHeaderLength = InFileSize - DummyFileSize;
> }
> }
> if (SectGuidHeaderLength == 0) {
> SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
> --
> 2.6.1.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Patch] BaseTools: Fix GenSec GCC make failure
2017-12-05 13:54 [Patch] BaseTools: Fix GenSec GCC make failure Yonghong Zhu
2017-12-05 14:14 ` Leif Lindholm
2017-12-05 14:58 ` Gao, Liming
@ 2017-12-05 18:19 ` Laszlo Ersek
2 siblings, 0 replies; 6+ messages in thread
From: Laszlo Ersek @ 2017-12-05 18:19 UTC (permalink / raw)
To: Yonghong Zhu, edk2-devel; +Cc: Leif Lindholm, Liming Gao
On 12/05/17 14:54, Yonghong Zhu wrote:
> It is a regression bug introduced by the patch b37b108, it cause GenSec
> make failure on GCC Env.
>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
> ---
> BaseTools/Source/C/GenSec/GenSec.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/BaseTools/Source/C/GenSec/GenSec.c b/BaseTools/Source/C/GenSec/GenSec.c
> index 2b2def1..5545f12 100644
> --- a/BaseTools/Source/C/GenSec/GenSec.c
> +++ b/BaseTools/Source/C/GenSec/GenSec.c
> @@ -1324,11 +1324,11 @@ Returns:
> // Open file and read contents
> //
> DummyFile = fopen (LongFilePath (DummyFileName), "rb");
> if (DummyFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", DummyFileName);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (DummyFile, 0, SEEK_END);
> DummyFileSize = ftell (DummyFile);
> fseek (DummyFile, 0, SEEK_SET);
> @@ -1338,22 +1338,22 @@ Returns:
> DebugMsg (NULL, 0, 9, "Dummy files", "the dummy file name is %s and the size is %u bytes", DummyFileName, (unsigned) DummyFileSize);
>
> InFile = fopen(LongFilePath(InputFileName[0]), "rb");
> if (InFile == NULL) {
> Error (NULL, 0, 0001, "Error opening file", InputFileName[0]);
> - return EFI_ABORTED;
> + goto Finish;
> }
>
> fseek (InFile, 0, SEEK_END);
> InFileSize = ftell (InFile);
> fseek (InFile, 0, SEEK_SET);
> InFileBuffer = (UINT8 *) malloc (InFileSize);
> fread(InFileBuffer, 1, InFileSize, InFile);
> fclose(InFile);
> DebugMsg (NULL, 0, 9, "Input files", "the input file name is %s and the size is %u bytes", InputFileName[0], (unsigned) InFileSize);
> if (InFileSize > DummyFileSize){
> - if (stricmp(DummyFileBuffer, InFileBuffer + (InFileSize - DummyFileSize)) == 0){
> + if (stricmp((CHAR8 *)DummyFileBuffer, (CHAR8 *)(InFileBuffer + (InFileSize - DummyFileSize))) == 0){
> SectGuidHeaderLength = InFileSize - DummyFileSize;
> }
> }
> if (SectGuidHeaderLength == 0) {
> SectGuidAttribute |= EFI_GUIDED_SECTION_PROCESSING_REQUIRED;
>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-12-05 18:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-05 13:54 [Patch] BaseTools: Fix GenSec GCC make failure Yonghong Zhu
2017-12-05 14:14 ` Leif Lindholm
2017-12-05 14:50 ` Leif Lindholm
2017-12-05 14:58 ` Gao, Liming
2017-12-05 14:58 ` Gao, Liming
2017-12-05 18:19 ` Laszlo Ersek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox