From: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
To: Eric Jin <eric.jin@intel.com>, edk2-devel@lists.01.org
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Subject: Re: [PATCH] uefi-sct/SctPkg:The original design for the 'EraseLengthGranularity' test need consider this case
Date: Mon, 15 Oct 2018 03:08:44 +0100 [thread overview]
Message-ID: <61ec5985-249f-472a-89be-e143882fb015@arm.com> (raw)
In-Reply-To: <20181013155111.560-1-eric.jin@intel.com>
Commit Message less than 80 cols please.
On 10/13/2018 04:51 PM, Eric Jin wrote:
> For the SD device, no same as the eMMC, the 'EraseLengthGranularity' is 1.
>
> Cc: Supreeth Venkatesh<supreeth.venkatesh@arm.com>
> Cc: Jiaxin Wu<jiaxin.wu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin<eric.jin@intel.com>
> ---
> .../BlackBoxTest/EraseBlockBBTestFunction.c | 154 +++++++++---------
> 1 file changed, 78 insertions(+), 76 deletions(-)
>
> diff --git a/uefi-sct/SctPkg/TestCase/UEFI/EFI/Protocol/EraseBlock/BlackBoxTest/EraseBlockBBTestFunction.c b/uefi-sct/SctPkg/TestCase/UEFI/EFI/Protocol/EraseBlock/BlackBoxTest/EraseBlockBBTestFunction.c
> index bc16a473..ea081625 100644
> --- a/uefi-sct/SctPkg/TestCase/UEFI/EFI/Protocol/EraseBlock/BlackBoxTest/EraseBlockBBTestFunction.c
> +++ b/uefi-sct/SctPkg/TestCase/UEFI/EFI/Protocol/EraseBlock/BlackBoxTest/EraseBlockBBTestFunction.c
> @@ -214,54 +214,56 @@ BBTestEraseBlocksFunctionTest (
> }
>
> // Erase Blocks with non-EraseLengthGranularity blocks
> - Token.Event = NULL;
> - Token.TransactionStatus = EFI_NOT_READY;
> - EraseStatus = EraseBlock->EraseBlocks (EraseBlock, MediaId, Lba+1, &Token, BufferSize - 2 * BlockSize);
> -
> - // Read the data with 0, the first/last block should not be erased
> - ReadStatus = BlockIo->ReadBlocks (BlockIo, MediaId, Lba, BufferSize, (VOID*)Buffer2);
> - if (ReadStatus == EFI_SUCCESS) {
> - for (Index1 = 0; Index1 < BlockSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero1 = FALSE;
> - break;
> + if (BufferSize > 2 * BlockSize) {
Magic Number 2.
> + Token.Event = NULL;
> + Token.TransactionStatus = EFI_NOT_READY;
> +
> + EraseStatus = EraseBlock->EraseBlocks (EraseBlock, MediaId, Lba+1, &Token, BufferSize - 2 * BlockSize);
Magic number 2.
> +
> + // Read the data with 0, the first/last block should not be erased
> + ReadStatus = BlockIo->ReadBlocks (BlockIo, MediaId, Lba, BufferSize, (VOID*)Buffer2);
> + if (ReadStatus == EFI_SUCCESS) {
> + for (Index1 = 0; Index1 < BlockSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero1 = FALSE;
> + break;
> + }
> }
> - }
>
> - for (Index1 = BlockSize; Index1 < BufferSize - BlockSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero2 = FALSE;
> - break;
> + for (Index1 = BlockSize; Index1 < BufferSize - BlockSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero2 = FALSE;
> + break;
> + }
> }
> - }
>
> - for (Index1 = BufferSize - BlockSize; Index1 < BufferSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero3 = FALSE;
> - break;
> + for (Index1 = BufferSize - BlockSize; Index1 < BufferSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero3 = FALSE;
> + break;
> + }
> }
> - }
>
> - if ((EraseStatus == EFI_SUCCESS) && (IsZero1 == FALSE) && (IsZero2 == TRUE) && ((IsZero3 == FALSE)))
> - AssertionType = EFI_TEST_ASSERTION_PASSED;
> - else
> - AssertionType = EFI_TEST_ASSERTION_FAILED;
> + if ((EraseStatus == EFI_SUCCESS) && (IsZero1 == FALSE) && (IsZero2 == TRUE) && ((IsZero3 == FALSE)))
Less than 80 cols.
> + AssertionType = EFI_TEST_ASSERTION_PASSED;
> + else
> + AssertionType = EFI_TEST_ASSERTION_FAILED;
>
>
> - StandardLib->RecordAssertion (
> - StandardLib,
> - AssertionType,
> - gEraseBlockBBTestFunctionAssertionGuid003,
> - L"EraseBlocks - EraseBlocks for testing, the first/last block should not be erased",
> - L"%a:%d:EraseBlocks Status - %r, IsZero1 - %d, IsZero2 - %d, IsZero3 - %d",
> - __FILE__,
> - (UINTN)__LINE__,
> - Status,
> - IsZero1, IsZero2, IsZero3
> - );
> + StandardLib->RecordAssertion (
> + StandardLib,
> + AssertionType,
> + gEraseBlockBBTestFunctionAssertionGuid003,
> + L"EraseBlocks - EraseBlocks for testing, the first/last block should not be erased",
> + L"%a:%d:EraseBlocks Status - %r, IsZero1 - %d, IsZero2 - %d, IsZero3 - %d",
> + __FILE__,
> + (UINTN)__LINE__,
> + EraseStatus,
> + IsZero1, IsZero2, IsZero3
> + );
>
> + }
> }
> -
> //
> // Erase Blocks with the EraseLengthGranularity blocks
> //
> @@ -453,13 +455,13 @@ BlockIo2:
> //
> // Erase Blocks with non EraseLengthGranularity blocks
> //
> + if (BufferSize > 2 * BlockSize) {
Magic Number 2.
> + Token.Event = NULL;
> + Token.TransactionStatus = EFI_NOT_READY;
>
> - Token.Event = NULL;
> - Token.TransactionStatus = EFI_NOT_READY;
> -
> - EnterEvent = 0;
> + EnterEvent = 0;
>
> - Status = gtBS->CreateEvent (
> + Status = gtBS->CreateEvent (
> EVT_NOTIFY_SIGNAL,
> TPL_CALLBACK,
> (EFI_EVENT_NOTIFY) NotifyFunction,
> @@ -467,8 +469,8 @@ BlockIo2:
> &Token.Event
> );
>
> - if (EFI_ERROR (Status)) {
> - StandardLib->RecordAssertion (
> + if (EFI_ERROR (Status)) {
> + StandardLib->RecordAssertion (
> StandardLib,
> EFI_TEST_ASSERTION_FAILED,
> gTestGenericFailureGuid,
> @@ -478,46 +480,46 @@ BlockIo2:
> (UINTN)__LINE__,
> Status
> );
> - FreeAlignedPool(Buffer1);
> - FreeAlignedPool(Buffer2);
> - goto End;
> - }
> + FreeAlignedPool(Buffer1);
> + FreeAlignedPool(Buffer2);
> + goto End;
> + }
>
> - EraseStatus = EraseBlock->EraseBlocks (EraseBlock, MediaId, Lba+1, &Token, BufferSize - 2 * BlockSize);
> + EraseStatus = EraseBlock->EraseBlocks (EraseBlock, MediaId, Lba+1, &Token, BufferSize - 2 * BlockSize);
Magic Number 2.
>
> - while(Token.TransactionStatus == EFI_NOT_READY);
> + while(Token.TransactionStatus == EFI_NOT_READY);
>
> - // Read the data with 0, the first/last block should not be erased
> - ReadStatus = BlockIo2->ReadBlocksEx (BlockIo2, MediaId, Lba, &BlockIo2Token, BufferSize, (VOID*)Buffer2);
> - if (ReadStatus == EFI_SUCCESS) {
> - for (Index1 = 0; Index1 < BlockSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero1 = FALSE;
> - break;
> + // Read the data with 0, the first/last block should not be erased
> + ReadStatus = BlockIo2->ReadBlocksEx (BlockIo2, MediaId, Lba, &BlockIo2Token, BufferSize, (VOID*)Buffer2);
> + if (ReadStatus == EFI_SUCCESS) {
> + for (Index1 = 0; Index1 < BlockSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero1 = FALSE;
> + break;
> + }
> }
> - }
>
> - for (Index1 = BlockSize; Index1 < BufferSize - BlockSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero2 = FALSE;
> - break;
> + for (Index1 = BlockSize; Index1 < BufferSize - BlockSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero2 = FALSE;
> + break;
> + }
> }
> - }
>
> - for (Index1 = BufferSize - BlockSize; Index1 < BufferSize; Index1++) {
> - if (Buffer2[Index1] != 0) {
> - IsZero3 = FALSE;
> - break;
> + for (Index1 = BufferSize - BlockSize; Index1 < BufferSize; Index1++) {
> + if (Buffer2[Index1] != 0) {
> + IsZero3 = FALSE;
> + break;
> + }
> }
> - }
>
> - if ((EraseStatus == EFI_SUCCESS) && (IsZero1 == FALSE) && (IsZero2 == TRUE) && ((IsZero3 == FALSE)))
> - AssertionType = EFI_TEST_ASSERTION_PASSED;
> - else
> - AssertionType = EFI_TEST_ASSERTION_FAILED;
> + if ((EraseStatus == EFI_SUCCESS) && (IsZero1 == FALSE) && (IsZero2 == TRUE) && ((IsZero3 == FALSE)))
less than 80 cols.
> + AssertionType = EFI_TEST_ASSERTION_PASSED;
> + else
> + AssertionType = EFI_TEST_ASSERTION_FAILED;
>
>
> - StandardLib->RecordAssertion (
> + StandardLib->RecordAssertion (
> StandardLib,
> AssertionType,
> gEraseBlockBBTestFunctionAssertionGuid004,
> @@ -525,12 +527,12 @@ BlockIo2:
> L"%a:%d:EraseBlocks Status - %r, IsZero1 - %d, IsZero2 - %d, IsZero3 - %d",
> __FILE__,
> (UINTN)__LINE__,
> - Status,
> + EraseStatus,
> IsZero1, IsZero2, IsZero3
> );
>
> + }
> }
> -
> //
> // Erase Blocks with the EraseLengthGranularity blocks
> //
next prev parent reply other threads:[~2018-10-16 9:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-13 15:51 [PATCH] uefi-sct/SctPkg:The original design for the 'EraseLengthGranularity' test need consider this case Eric Jin
2018-10-15 1:44 ` Supreeth Venkatesh
2018-10-15 13:10 ` Supreeth Venkatesh
2018-10-15 2:08 ` Supreeth Venkatesh [this message]
2018-10-15 12:57 ` Supreeth Venkatesh
2018-10-15 13:10 ` Supreeth Venkatesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=61ec5985-249f-472a-89be-e143882fb015@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox