From: Santhapur Naveen <naveens@amiindia.co.in>
To: "Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ye, Ting" <ting.ye@intel.com>, "Fu, Siyuan" <siyuan.fu@intel.com>
Subject: Re: [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Date: Fri, 2 Sep 2016 06:16:25 +0000 [thread overview]
Message-ID: <625A2455CC232F40B0F38F05ACED6D976C5472EB@VENUS1.in.megatrends.com> (raw)
In-Reply-To: 895558F6EA4E3B41AC93A00D163B7274137C87CB@SHSMSX103.ccr.corp.intel.com
Hello Jiaxin,
My sincere apologies for the delayed response.
I've verified the patch from my side and PXE boot is happening successfully even in classless IP network.
May I know whether this will be included in EDK2? If yes, can you please provide any schedule for the same?
Best regards,
Naveen
-----Original Message-----
From: Santhapur Naveen
Sent: Thursday, August 18, 2016 11:14 AM
To: 'Wu, Jiaxin'; edk2-devel@lists.01.org
Cc: Ye, Ting; Fu, Siyuan; Sivaraman Nainar; Madhan B. Santharam
Subject: RE: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Jiaxin,
We will verify the patch and update you the result.
Thanks,
Naveen
-----Original Message-----
From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
Sent: Thursday, August 18, 2016 11:12 AM
To: Santhapur Naveen; Wu, Jiaxin; edk2-devel@lists.01.org
Cc: Ye, Ting; Fu, Siyuan; Sivaraman Nainar; Madhan B. Santharam
Subject: RE: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Naveen,
Can you help to verify this patch to support the classless IP.
Thanks,
Jiaxin
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Jiaxin Wu
> Sent: Thursday, August 18, 2016 1:39 PM
> To: edk2-devel@lists.01.org
> Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>;
> Santhapur Naveen <naveens@amiindia.co.in>
> Subject: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4
> TransmitReceive()
>
> The IP address should not be treated as classful one if DHCP options
> contain a classless IP with its true subnet mask. Otherwise, DHCPv4
> TransmitReceive() will failed. This real subnet mask will be parsed
> and recorded in DhcpSb->Netmask. So, we need check it before get the
> IP's corresponding subnet mask.
>
> Cc: Santhapur Naveen <naveens@amiindia.co.in>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
> ---
> .../Universal/Network/Dhcp4Dxe/Dhcp4Impl.c | 28 +++++++++++++++-
> ------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> b/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> index 4f491b4..79f7cde 100644
> --- a/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> +++ b/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> @@ -1,9 +1,9 @@
> /** @file
> This file implement the EFI_DHCP4_PROTOCOL interface.
>
> -Copyright (c) 2006 - 2015, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2006 - 2016, Intel Corporation. All rights
> +reserved.<BR>
> This program and the accompanying materials are licensed and made
> available under the terms and conditions of the BSD License which
> accompanies this distribution. The full text of the license may be
> found at http://opensource.org/licenses/bsd-license.php
>
> @@ -1186,18 +1186,20 @@ Dhcp4InstanceConfigUdpIo (
> IN UDP_IO *UdpIo,
> IN VOID *Context
> )
> {
> DHCP_PROTOCOL *Instance;
> + DHCP_SERVICE *DhcpSb;
> EFI_DHCP4_TRANSMIT_RECEIVE_TOKEN *Token;
> EFI_UDP4_CONFIG_DATA UdpConfigData;
> IP4_ADDR ClientAddr;
> IP4_ADDR Ip;
> INTN Class;
> IP4_ADDR SubnetMask;
>
> Instance = (DHCP_PROTOCOL *) Context;
> + DhcpSb = Instance->Service;
> Token = Instance->Token;
>
> ZeroMem (&UdpConfigData, sizeof (EFI_UDP4_CONFIG_DATA));
>
> UdpConfigData.AcceptBroadcast = TRUE;
> @@ -1206,14 +1208,19 @@ Dhcp4InstanceConfigUdpIo (
> UdpConfigData.DoNotFragment = TRUE;
>
> ClientAddr = EFI_NTOHL (Token->Packet->Dhcp4.Header.ClientAddr);
> Ip = HTONL (ClientAddr);
> CopyMem (&UdpConfigData.StationAddress, &Ip, sizeof
> (EFI_IPv4_ADDRESS));
> -
> - Class = NetGetIpClass (ClientAddr);
> - ASSERT (Class < IP4_ADDR_CLASSE);
> - SubnetMask = gIp4AllMasks[Class << 3];
> +
> + if (DhcpSb->Netmask == 0) {
> + Class = NetGetIpClass (ClientAddr);
> + ASSERT (Class < IP4_ADDR_CLASSE);
> + SubnetMask = gIp4AllMasks[Class << 3]; } else {
> + SubnetMask = DhcpSb->Netmask;
> + }
> +
> Ip = HTONL (SubnetMask);
> CopyMem (&UdpConfigData.SubnetMask, &Ip, sizeof
> (EFI_IPv4_ADDRESS));
>
> if ((Token->ListenPointCount == 0) ||
> (Token->ListenPoints[0].ListenPort
> == 0)) {
> UdpConfigData.StationPort = DHCP_CLIENT_PORT; @@ -1574,16
> +1581,21 @@ EfiDhcp4TransmitReceive (
> EndPoint.RemotePort = DHCP_SERVER_PORT;
> } else {
> EndPoint.RemotePort = Token->RemotePort;
> }
>
> + if (DhcpSb->Netmask == 0) {
> + Class = NetGetIpClass (ClientAddr);
> + ASSERT (Class < IP4_ADDR_CLASSE);
> + SubnetMask = gIp4AllMasks[Class << 3]; } else {
> + SubnetMask = DhcpSb->Netmask;
> + }
> +
> //
> // Get the gateway.
> //
> - Class = NetGetIpClass (ClientAddr);
> - ASSERT (Class < IP4_ADDR_CLASSE);
> - SubnetMask = gIp4AllMasks[Class << 3];
> ZeroMem (&Gateway, sizeof (Gateway));
> if (!IP4_NET_EQUAL (ClientAddr, EndPoint.RemoteAddr.Addr[0],
> SubnetMask)) {
> CopyMem (&Gateway.v4, &Token->GatewayAddress, sizeof
> (EFI_IPv4_ADDRESS));
> Gateway.Addr[0] = NTOHL (Gateway.Addr[0]);
> }
> --
> 1.9.5.msysgit.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-09-02 6:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 5:38 [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive() Jiaxin Wu
2016-08-18 5:41 ` Wu, Jiaxin
2016-08-18 5:43 ` Santhapur Naveen
2016-09-02 6:16 ` Santhapur Naveen [this message]
2016-09-06 11:05 ` Wu, Jiaxin
2016-09-06 11:47 ` Santhapur Naveen
2016-10-14 7:18 ` Santhapur Naveen
2016-10-18 2:45 ` Fu, Siyuan
2016-10-18 6:44 ` Santhapur Naveen
2016-09-06 1:02 ` Fu, Siyuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=625A2455CC232F40B0F38F05ACED6D976C5472EB@VENUS1.in.megatrends.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox