* [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions
@ 2016-10-25 16:37 Ard Biesheuvel
2016-10-25 16:37 ` [PATCH 1/3] BeagleBoardPkg: remove unused modules Ard Biesheuvel
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Ard Biesheuvel @ 2016-10-25 16:37 UTC (permalink / raw)
To: edk2-devel, leif.lindholm; +Cc: lersek, Ard Biesheuvel
Get rid of unused modules and switch to the generic BDS, so we are only
left with code that does not use any deprecated functionality, allowing
us to define DISABLE_NEW_DEPRECATED_INTERFACES
Ard Biesheuvel (3):
BeagleBoardPkg: remove unused modules
BeagleBoardPkg: move to generic BDS
BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES
BeagleBoardPkg/Bds/Bds.inf | 65 -----
BeagleBoardPkg/Bds/BdsEntry.c | 242 ----------------
BeagleBoardPkg/Bds/BdsEntry.h | 66 -----
BeagleBoardPkg/Bds/FirmwareVolume.c | 150 ----------
BeagleBoardPkg/BeagleBoardPkg.dsc | 64 ++++-
BeagleBoardPkg/BeagleBoardPkg.fdf | 7 +-
BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c | 299 --------------------
BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf | 53 ----
BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c | 103 -------
BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf | 41 ---
BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S | 85 ------
BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm | 89 ------
BeagleBoardPkg/Sec/Cache.c | 79 ------
BeagleBoardPkg/Sec/Clock.c | 70 -----
BeagleBoardPkg/Sec/LzmaDecompress.h | 103 -------
BeagleBoardPkg/Sec/PadConfiguration.c | 282 ------------------
BeagleBoardPkg/Sec/Sec.c | 186 ------------
BeagleBoardPkg/Sec/Sec.inf | 73 -----
18 files changed, 58 insertions(+), 1999 deletions(-)
delete mode 100644 BeagleBoardPkg/Bds/Bds.inf
delete mode 100644 BeagleBoardPkg/Bds/BdsEntry.c
delete mode 100644 BeagleBoardPkg/Bds/BdsEntry.h
delete mode 100644 BeagleBoardPkg/Bds/FirmwareVolume.c
delete mode 100644 BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c
delete mode 100644 BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf
delete mode 100644 BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c
delete mode 100644 BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf
delete mode 100644 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S
delete mode 100644 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm
delete mode 100644 BeagleBoardPkg/Sec/Cache.c
delete mode 100644 BeagleBoardPkg/Sec/Clock.c
delete mode 100644 BeagleBoardPkg/Sec/LzmaDecompress.h
delete mode 100644 BeagleBoardPkg/Sec/PadConfiguration.c
delete mode 100644 BeagleBoardPkg/Sec/Sec.c
delete mode 100644 BeagleBoardPkg/Sec/Sec.inf
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/3] BeagleBoardPkg: remove unused modules 2016-10-25 16:37 [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Ard Biesheuvel @ 2016-10-25 16:37 ` Ard Biesheuvel 2016-10-25 17:40 ` Leif Lindholm 2016-10-25 16:37 ` [PATCH 2/3] BeagleBoardPkg: move to generic BDS Ard Biesheuvel ` (2 subsequent siblings) 3 siblings, 1 reply; 8+ messages in thread From: Ard Biesheuvel @ 2016-10-25 16:37 UTC (permalink / raw) To: edk2-devel, leif.lindholm; +Cc: lersek, Ard Biesheuvel Commit 0bade1054db7 ("BeagleBoardPkg: Replaced the original DSC/FDF files by their new versions that use the ARM Platform Framework"), which dates back to 2011, modified BeagleBoardPkg to replace references to its Sec.inf, Bds.inf and some of its library implementations to refer to versions under ArmPlatformPkg instead. Since the original modules have been unused ever since, we can safely remove them now. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- BeagleBoardPkg/Bds/Bds.inf | 65 ----- BeagleBoardPkg/Bds/BdsEntry.c | 242 ---------------- BeagleBoardPkg/Bds/BdsEntry.h | 66 ----- BeagleBoardPkg/Bds/FirmwareVolume.c | 150 ---------- BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c | 299 -------------------- BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf | 53 ---- BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c | 103 ------- BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf | 41 --- BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S | 85 ------ BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm | 89 ------ BeagleBoardPkg/Sec/Cache.c | 79 ------ BeagleBoardPkg/Sec/Clock.c | 70 ----- BeagleBoardPkg/Sec/LzmaDecompress.h | 103 ------- BeagleBoardPkg/Sec/PadConfiguration.c | 282 ------------------ BeagleBoardPkg/Sec/Sec.c | 186 ------------ BeagleBoardPkg/Sec/Sec.inf | 73 ----- 16 files changed, 1986 deletions(-) diff --git a/BeagleBoardPkg/Bds/Bds.inf b/BeagleBoardPkg/Bds/Bds.inf deleted file mode 100644 index 2b20a09549d5..000000000000 --- a/BeagleBoardPkg/Bds/Bds.inf +++ /dev/null @@ -1,65 +0,0 @@ - -#/** @file -# -# Component description file for Bds module -# -# Copyright (c) 2009, Apple Inc. All rights reserved.<BR> -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardBds - FILE_GUID = 934431fe-5745-402e-913d-17b4434eb0f3 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = BdsInitialize - -[Sources.common] - BdsEntry.c - FirmwareVolume.c - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - -[LibraryClasses] - DevicePathLib - BaseLib - HobLib - UefiRuntimeServicesTableLib - ReportStatusCodeLib - PerformanceLib - DxeServicesTableLib - MemoryAllocationLib - UefiLib - UefiBootServicesTableLib - BaseMemoryLib - DebugLib - PrintLib - UefiDriverEntryPoint - -[Guids] - - -[Protocols] - gEfiBdsArchProtocolGuid - gEfiSimpleTextInProtocolGuid - gEfiSimpleTextOutProtocolGuid - gEfiSerialIoProtocolGuid - gEfiDevicePathProtocolGuid - gEfiSimpleFileSystemProtocolGuid - gEfiUsbIoProtocolGuid - gEfiFirmwareVolume2ProtocolGuid - -[Depex] - TRUE diff --git a/BeagleBoardPkg/Bds/BdsEntry.c b/BeagleBoardPkg/Bds/BdsEntry.c deleted file mode 100644 index f2f1ae3983a6..000000000000 --- a/BeagleBoardPkg/Bds/BdsEntry.c +++ /dev/null @@ -1,242 +0,0 @@ -/** @file - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements - of the UEFI specification as it is designed to implement an embedded systmes - propriatary boot scheme. - - This template assume a DXE driver produces a SerialIo protocol not using the EFI - driver module and it will attempt to connect a console on top of this. - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "BdsEntry.h" - - -BOOLEAN gConsolePresent = FALSE; - -EFI_BDS_ARCH_PROTOCOL gBdsProtocol = { - BdsEntry, -}; - - - - -/** - This function uses policy data from the platform to determine what operating - system or system utility should be loaded and invoked. This function call - also optionally make the use of user input to determine the operating system - or system utility to be loaded and invoked. When the DXE Core has dispatched - all the drivers on the dispatch queue, this function is called. This - function will attempt to connect the boot devices required to load and invoke - the selected operating system or system utility. During this process, - additional firmware volumes may be discovered that may contain addition DXE - drivers that can be dispatched by the DXE Core. If a boot device cannot be - fully connected, this function calls the DXE Service Dispatch() to allow the - DXE drivers from any newly discovered firmware volumes to be dispatched. - Then the boot device connection can be attempted again. If the same boot - device connection operation fails twice in a row, then that boot device has - failed, and should be skipped. This function should never return. - - @param This The EFI_BDS_ARCH_PROTOCOL instance. - - @return None. - -**/ -VOID -EFIAPI -BdsEntry ( - IN EFI_BDS_ARCH_PROTOCOL *This - ) -{ - EFI_STATUS Status; - UINTN NoHandles; - EFI_HANDLE *Buffer; - EFI_HANDLE FvHandle; - EFI_HANDLE ImageHandle; - EFI_HANDLE UsbDeviceHandle; - EFI_GUID NameGuid; - UINTN Size; - UINTN HandleCount; - UINTN OldHandleCount; - EFI_HANDLE *HandleBuffer; - UINTN Index; - EFI_DEVICE_PATH_PROTOCOL *LoadImageDevicePath; - EFI_DEVICE_PATH_PROTOCOL *FileSystemDevicePath; - - PERF_END (NULL, "DXE", NULL, 0); - PERF_START (NULL, "BDS", NULL, 0); - - - // - // Now do the EFI stuff - // - Size = 0x100; - gST->FirmwareVendor = AllocateRuntimePool (Size); - ASSERT (gST->FirmwareVendor != NULL); - - UnicodeSPrint (gST->FirmwareVendor, Size, L"BeagleBoard EFI %a %a", __DATE__, __TIME__); - - // - // Now we need to setup the EFI System Table with information about the console devices. - // This code is normally in the console spliter driver on platforms that support multiple - // consoles at the same time - // - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextOutProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - // Use the first SimpleTextOut we find and update the EFI System Table - gST->ConsoleOutHandle = Buffer[0]; - gST->StandardErrorHandle = Buffer[0]; - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextOutProtocolGuid, (VOID **)&gST->ConOut); - ASSERT_EFI_ERROR (Status); - - gST->StdErr = gST->ConOut; - - gST->ConOut->OutputString (gST->ConOut, L"BDS: Console Started!!!!\n\r"); - FreePool (Buffer); - - gConsolePresent = TRUE; - } - - - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextInProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - // Use the first SimpleTextIn we find and update the EFI System Table - gST->ConsoleInHandle = Buffer[0]; - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextInProtocolGuid, (VOID **)&gST->ConIn); - ASSERT_EFI_ERROR (Status); - - FreePool (Buffer); - } - - // - // We now have EFI Consoles up and running. Print () will work now. DEBUG () and ASSERT () worked - // prior to this point as they were configured to use a more primative output scheme. - // - - // - //Perform Connect - // - HandleCount = 0; - while (1) { - OldHandleCount = HandleCount; - Status = gBS->LocateHandleBuffer ( - AllHandles, - NULL, - NULL, - &HandleCount, - &HandleBuffer - ); - if (EFI_ERROR (Status)) { - break; - } - - if (HandleCount == OldHandleCount) { - break; - } - - for (Index = 0; Index < HandleCount; Index++) { - gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE); - } - } - - EfiSignalEventReadyToBoot (); - - //Locate handles for SimpleFileSystem protocol - Status = gBS->LocateHandleBuffer ( - ByProtocol, - &gEfiSimpleFileSystemProtocolGuid, - NULL, - &HandleCount, - &HandleBuffer - ); - if (!EFI_ERROR(Status)) { - for (Index = 0; Index < HandleCount; Index++) { - //Get the device path - FileSystemDevicePath = DevicePathFromHandle(HandleBuffer[Index]); - if (FileSystemDevicePath == NULL) { - continue; - } - - //Check if UsbIo is on any handles in the device path. - Status = gBS->LocateDevicePath(&gEfiUsbIoProtocolGuid, &FileSystemDevicePath, &UsbDeviceHandle); - if (EFI_ERROR(Status)) { - continue; - } - - //Check if Usb stick has a magic EBL file. - LoadImageDevicePath = FileDevicePath(HandleBuffer[Index], L"Ebl.efi"); - Status = gBS->LoadImage (TRUE, gImageHandle, LoadImageDevicePath, NULL, 0, &ImageHandle); - if (EFI_ERROR(Status)) { - continue; - } - - //Boot to Shell on USB stick. - Status = gBS->StartImage (ImageHandle, NULL, NULL); - if (EFI_ERROR(Status)) { - continue; - } - } - } - - // - // Normal UEFI behavior is to process Globally Defined Variables as defined in Chapter 3 - // (Boot Manager) of the UEFI specification. For this embedded system we don't do this. - // - - // - // Search all the FVs for an application with a UI Section of Ebl. A .FDF file can be used - // to control the names of UI sections in an FV. - // - Status = FindApplicationMatchingUiSection (L"Ebl", &FvHandle, &NameGuid); - if (!EFI_ERROR (Status)) { - - //Boot to Shell. - Status = LoadPeCoffSectionFromFv (FvHandle, &NameGuid); - - if (EFI_ERROR(Status)) { - DEBUG((EFI_D_ERROR, "Boot from Shell failed. Status: %r\n", Status)); - } - } - - // - // EFI does not define the behaviour if all boot attemps fail and the last one returns. - // So we make a policy choice to reset the system since this BDS does not have a UI. - // - gRT->ResetSystem (EfiResetShutdown, Status, 0, NULL); - - return ; -} - - -EFI_STATUS -EFIAPI -BdsInitialize ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - - // - // Install protocol interface - // - Status = gBS->InstallMultipleProtocolInterfaces ( - &ImageHandle, - &gEfiBdsArchProtocolGuid, &gBdsProtocol, - NULL - ); - ASSERT_EFI_ERROR (Status); - - return Status; -} - - diff --git a/BeagleBoardPkg/Bds/BdsEntry.h b/BeagleBoardPkg/Bds/BdsEntry.h deleted file mode 100644 index 646f7b276d45..000000000000 --- a/BeagleBoardPkg/Bds/BdsEntry.h +++ /dev/null @@ -1,66 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __BDS_ENTRY_H__ -#define __BDS_ENTRY_H__ - -#include <PiDxe.h> -#include <Library/BaseLib.h> -#include <Library/DebugLib.h> -#include <Library/PrintLib.h> -#include <Library/BaseMemoryLib.h> -#include <Library/UefiBootServicesTableLib.h> -#include <Library/UefiLib.h> -#include <Library/MemoryAllocationLib.h> -#include <Library/DxeServicesTableLib.h> -#include <Library/UefiRuntimeServicesTableLib.h> -#include <Library/HobLib.h> -#include <Library/DevicePathLib.h> -#include <Library/PcdLib.h> -#include <Library/MemoryAllocationLib.h> -#include <Library/PrintLib.h> -#include <Library/PerformanceLib.h> - -#include <Protocol/Bds.h> -#include <Protocol/SerialIo.h> -#include <Protocol/FirmwareVolume2.h> -#include <Protocol/SimpleTextIn.h> -#include <Protocol/SimpleTextOut.h> -#include <Protocol/EmbeddedDevice.h> -#include <Protocol/DevicePath.h> -#include <Protocol/SimpleFileSystem.h> -#include <Protocol/UsbIo.h> - - -EFI_STATUS -LoadPeCoffSectionFromFv ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ); - -EFI_STATUS -FindApplicationMatchingUiSection ( - IN CHAR16 *UiString, - OUT EFI_HANDLE *FvHandle, - OUT EFI_GUID *NameGuid - ); - -VOID -EFIAPI -BdsEntry ( - IN EFI_BDS_ARCH_PROTOCOL *This - ); - -#endif - diff --git a/BeagleBoardPkg/Bds/FirmwareVolume.c b/BeagleBoardPkg/Bds/FirmwareVolume.c deleted file mode 100644 index 31e1c5100eff..000000000000 --- a/BeagleBoardPkg/Bds/FirmwareVolume.c +++ /dev/null @@ -1,150 +0,0 @@ -/** @file - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements - of the UEFI specification as it is designed to implement an embedded systmes - propriatary boot scheme. - - This template assume a DXE driver produces a SerialIo protocol not using the EFI - driver module and it will attempt to connect a console on top of this. - - - Copyright (c) 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include "BdsEntry.h" - - -EFI_STATUS -FindApplicationMatchingUiSection ( - IN CHAR16 *UiString, - OUT EFI_HANDLE *FvHandle, - OUT EFI_GUID *NameGuid - ) -{ - EFI_STATUS Status; - EFI_STATUS NextStatus; - UINTN NoHandles; - EFI_HANDLE *Buffer; - UINTN Index; - EFI_FV_FILETYPE FileType; - EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv; - VOID *Key; - EFI_FV_FILE_ATTRIBUTES Attributes; - UINTN Size; - UINTN UiStringLen; - CHAR16 *UiSection; - UINT32 Authentication; - - - UiStringLen = 0; - if (UiString != NULL) { - DEBUG ((DEBUG_ERROR, "UiString %s\n", UiString)); - UiStringLen = StrLen (UiString); - } - - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiFirmwareVolume2ProtocolGuid, NULL, &NoHandles, &Buffer); - if (!EFI_ERROR (Status)) { - for (Index = 0; Index < NoHandles; Index++) { - Status = gBS->HandleProtocol (Buffer[Index], &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv); - if (!EFI_ERROR (Status)) { - Key = AllocatePool (Fv->KeySize); - ASSERT (Key != NULL); - ZeroMem (Key, Fv->KeySize); - - FileType = EFI_FV_FILETYPE_APPLICATION; - - do { - NextStatus = Fv->GetNextFile (Fv, Key, &FileType, NameGuid, &Attributes, &Size); - if (!EFI_ERROR (NextStatus)) { - if (UiString == NULL) { - // - // If UiString is NULL match first application we find. - // - *FvHandle = Buffer[Index]; - FreePool (Key); - return Status; - } - - UiSection = NULL; - Status = Fv->ReadSection ( - Fv, - NameGuid, - EFI_SECTION_USER_INTERFACE, - 0, - (VOID **)&UiSection, - &Size, - &Authentication - ); - if (!EFI_ERROR (Status)) { - if (StrnCmp (UiString, UiSection, UiStringLen) == 0) { - // - // We found a UiString match. - // - *FvHandle = Buffer[Index]; - FreePool (Key); - FreePool (UiSection); - return Status; - } - FreePool (UiSection); - } - } - } while (!EFI_ERROR (NextStatus)); - - FreePool (Key); - } - } - - FreePool (Buffer); - } - - return EFI_NOT_FOUND; -} - - -EFI_DEVICE_PATH * -FvFileDevicePath ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ) -{ - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - MEDIA_FW_VOL_FILEPATH_DEVICE_PATH NewNode; - - DevicePath = DevicePathFromHandle (FvHandle); - - EfiInitializeFwVolDevicepathNode (&NewNode, NameGuid); - - return AppendDevicePathNode (DevicePath, (EFI_DEVICE_PATH_PROTOCOL *)&NewNode); -} - - - -EFI_STATUS -LoadPeCoffSectionFromFv ( - IN EFI_HANDLE FvHandle, - IN EFI_GUID *NameGuid - ) -{ - EFI_STATUS Status; - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - EFI_HANDLE ImageHandle; - - DevicePath = FvFileDevicePath (FvHandle, NameGuid); - - Status = gBS->LoadImage (TRUE, gImageHandle, DevicePath, NULL, 0, &ImageHandle); - if (!EFI_ERROR (Status)) { - PERF_END (NULL, "BDS", NULL, 0); - Status = gBS->StartImage (ImageHandle, NULL, NULL); - } - - return Status; -} - diff --git a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c b/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c deleted file mode 100644 index 46204a4386b6..000000000000 --- a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c +++ /dev/null @@ -1,299 +0,0 @@ -/** @file - Add custom commands for BeagleBoard development. - - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <PiDxe.h> -#include <Library/ArmLib.h> -#include <Library/CacheMaintenanceLib.h> -#include <Library/EblCmdLib.h> -#include <Library/BaseLib.h> -#include <Library/DebugLib.h> -#include <Library/UefiBootServicesTableLib.h> -#include <Library/UefiRuntimeServicesTableLib.h> -#include <Library/MemoryAllocationLib.h> -#include <Library/UefiLib.h> -#include <Library/PcdLib.h> -#include <Library/EfiFileLib.h> -#include <Library/ArmDisassemblerLib.h> -#include <Library/PeCoffGetEntryPointLib.h> -#include <Library/PerformanceLib.h> -#include <Library/TimerLib.h> - -#include <Guid/DebugImageInfoTable.h> - -#include <Protocol/DebugSupport.h> -#include <Protocol/LoadedImage.h> - -/** - Simple arm disassembler via a library - - Argv[0] - symboltable - Argv[1] - Optional quoted format string - Argv[2] - Optional flag - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblSymbolTable ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - EFI_STATUS Status; - EFI_DEBUG_IMAGE_INFO_TABLE_HEADER *DebugImageTableHeader = NULL; - EFI_DEBUG_IMAGE_INFO *DebugTable; - UINTN Entry; - CHAR8 *Format; - CHAR8 *Pdb; - UINT32 PeCoffSizeOfHeaders; - UINT32 ImageBase; - BOOLEAN Elf; - - // Need to add lots of error checking on the passed in string - // Default string is for RealView debugger or gdb depending on toolchain used. - if (Argc > 1) { - Format = Argv[1]; - } else { -#if __GNUC__ - // Assume gdb - Format = "add-symbol-file %a 0x%x"; -#else - // Default to RVCT - Format = "load /a /ni /np %a &0x%x"; -#endif - } - Elf = (Argc > 2) ? FALSE : TRUE; - - Status = EfiGetSystemConfigurationTable (&gEfiDebugImageInfoTableGuid, (VOID **)&DebugImageTableHeader); - if (EFI_ERROR (Status)) { - return Status; - } - - DebugTable = DebugImageTableHeader->EfiDebugImageInfoTable; - if (DebugTable == NULL) { - return EFI_SUCCESS; - } - - for (Entry = 0; Entry < DebugImageTableHeader->TableSize; Entry++, DebugTable++) { - if (DebugTable->NormalImage != NULL) { - if ((DebugTable->NormalImage->ImageInfoType == EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL) && (DebugTable->NormalImage->LoadedImageProtocolInstance != NULL)) { - ImageBase = (UINT32)DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase; - PeCoffSizeOfHeaders = PeCoffGetSizeOfHeaders ((VOID *)(UINTN)ImageBase); - Pdb = PeCoffLoaderGetPdbPointer (DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase); - if (Pdb != NULL) { - if (Elf) { - // ELF and Mach-O images don't include the header so the linked address does not include header - ImageBase += PeCoffSizeOfHeaders; - } - AsciiPrint (Format, Pdb, ImageBase); - AsciiPrint ("\n"); - } else { - } - } - } - } - - return EFI_SUCCESS; -} - - -/** - Simple arm disassembler via a library - - Argv[0] - disasm - Argv[1] - Address to start disassembling from - ARgv[2] - Number of instructions to disassembly (optional) - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblDisassembler ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - UINT8 *Ptr, *CurrentAddress; - UINT32 Address; - UINT32 Count; - CHAR8 Buffer[80]; - UINT32 ItBlock; - - if (Argc < 2) { - return EFI_INVALID_PARAMETER; - } - - Address = AsciiStrHexToUintn (Argv[1]); - Count = (Argc > 2) ? (UINT32)AsciiStrHexToUintn (Argv[2]) : 20; - - Ptr = (UINT8 *)(UINTN)Address; - ItBlock = 0; - do { - CurrentAddress = Ptr; - DisassembleInstruction (&Ptr, TRUE, TRUE, &ItBlock, Buffer, sizeof (Buffer)); - AsciiPrint ("0x%08x: %a\n", CurrentAddress, Buffer); - } while (Count-- > 0); - - - return EFI_SUCCESS; -} - - -CHAR8 * -ImageHandleToPdbFileName ( - IN EFI_HANDLE Handle - ) -{ - EFI_STATUS Status; - EFI_LOADED_IMAGE_PROTOCOL *LoadedImage; - CHAR8 *Pdb; - CHAR8 *StripLeading; - - Status = gBS->HandleProtocol (Handle, &gEfiLoadedImageProtocolGuid, (VOID **)&LoadedImage); - if (EFI_ERROR (Status)) { - return ""; - } - - Pdb = PeCoffLoaderGetPdbPointer (LoadedImage->ImageBase); - StripLeading = AsciiStrStr (Pdb, "\\ARM\\"); - if (StripLeading == NULL) { - StripLeading = AsciiStrStr (Pdb, "/ARM/"); - if (StripLeading == NULL) { - return Pdb; - } - } - // Hopefully we hacked off the unneeded part - return (StripLeading + 5); -} - - -CHAR8 *mTokenList[] = { - "SEC", - "PEI", - "DXE", - "BDS", - NULL -}; - -/** - Simple arm disassembler via a library - - Argv[0] - disasm - Argv[1] - Address to start disassembling from - ARgv[2] - Number of instructions to disassembly (optional) - - @param Argc Number of command arguments in Argv - @param Argv Array of strings that represent the parsed command line. - Argv[0] is the command name - - @return EFI_SUCCESS - -**/ -EFI_STATUS -EblPerformance ( - IN UINTN Argc, - IN CHAR8 **Argv - ) -{ - UINTN Key; - CONST VOID *Handle; - CONST CHAR8 *Token, *Module; - UINT64 Start, Stop, TimeStamp; - UINT64 Delta, TicksPerSecond, Milliseconds, Microseconds; - UINTN Index; - - TicksPerSecond = GetPerformanceCounterProperties (NULL, NULL); - - Key = 0; - do { - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); - if (Key != 0) { - if (AsciiStriCmp ("StartImage:", Token) == 0) { - if (Stop == 0) { - // The entry for EBL is still running so the stop time will be zero. Skip it - AsciiPrint (" running %a\n", ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); - } else { - Delta = Stop - Start; - Microseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000000), TicksPerSecond, NULL); - AsciiPrint ("%10ld us %a\n", Microseconds, ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); - } - } - } - } while (Key != 0); - - AsciiPrint ("\n"); - - TimeStamp = 0; - Key = 0; - do { - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); - if (Key != 0) { - for (Index = 0; mTokenList[Index] != NULL; Index++) { - if (AsciiStriCmp (mTokenList[Index], Token) == 0) { - Delta = Stop - Start; - TimeStamp += Delta; - Milliseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000), TicksPerSecond, NULL); - AsciiPrint ("%6a %6ld ms\n", Token, Milliseconds); - break; - } - } - } - } while (Key != 0); - - AsciiPrint ("Total Time = %ld ms\n\n", DivU64x64Remainder (MultU64x32 (TimeStamp, 1000), TicksPerSecond, NULL)); - - return EFI_SUCCESS; -} - - -GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] = -{ - { - "disasm address [count]", - " disassemble count instructions", - NULL, - EblDisassembler - }, - { - "performance", - " Display boot performance info", - NULL, - EblPerformance - }, - { - "symboltable [\"format string\"] [PECOFF]", - " show symbol table commands for debugger", - NULL, - EblSymbolTable - } -}; - - -VOID -EblInitializeExternalCmd ( - VOID - ) -{ - EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE)); - return; -} diff --git a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf b/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf deleted file mode 100644 index a79448c0e95b..000000000000 --- a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf +++ /dev/null @@ -1,53 +0,0 @@ -#/** @file -# Component description file for the entry point to a EFIDXE Drivers -# -# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification -# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.<BR> -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardEblCmdLib - FILE_GUID = ea62bdc3-1063-425f-8851-98cb47f213a8 - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER - - -# -# The following information is for reference only and not required by the build tools. -# -# VALID_ARCHITECTURES = IA32 X64 IPF EBC -# - -[Sources.common] - EblCmdLib.c - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - -[LibraryClasses] - BaseLib - DebugLib - ArmDisassemblerLib - PerformanceLib - TimerLib - -[Protocols] - gEfiDebugSupportProtocolGuid - gEfiLoadedImageProtocolGuid - -[Guids] - gEfiDebugImageInfoTableGuid diff --git a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c b/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c deleted file mode 100644 index 82a2957dc97e..000000000000 --- a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c +++ /dev/null @@ -1,103 +0,0 @@ -/** @file - Basic serial IO abstaction for GDB - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <Uefi.h> -#include <Library/GdbSerialLib.h> -#include <Library/PcdLib.h> -#include <Library/IoLib.h> -#include <Library/DebugLib.h> -#include <Library/OmapLib.h> -#include <Omap3530/Omap3530.h> - -RETURN_STATUS -EFIAPI -GdbSerialLibConstructor ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - return RETURN_SUCCESS; -} - -RETURN_STATUS -EFIAPI -GdbSerialInit ( - IN UINT64 BaudRate, - IN UINT8 Parity, - IN UINT8 DataBits, - IN UINT8 StopBits - ) -{ - return RETURN_SUCCESS; -} - -BOOLEAN -EFIAPI -GdbIsCharAvailable ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - - if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { - return TRUE; - } else { - return FALSE; - } -} - -CHAR8 -EFIAPI -GdbGetChar ( - VOID - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; - CHAR8 Char; - - while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); - Char = MmioRead8(RBR); - - return Char; -} - -VOID -EFIAPI -GdbPutChar ( - IN CHAR8 Char - ) -{ - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; - UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; - - while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); - MmioWrite8(THR, Char); -} - -VOID -GdbPutString ( - IN CHAR8 *String - ) -{ - while (*String != '\0') { - GdbPutChar (*String); - String++; - } -} - - - - diff --git a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf b/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf deleted file mode 100644 index a06acf14fbcb..000000000000 --- a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf +++ /dev/null @@ -1,41 +0,0 @@ -#/** @file -# -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = GdbSerialLib - FILE_GUID = E2423349-EF5D-439B-95F5-8B8D8E3B443F - MODULE_TYPE = UEFI_DRIVER - VERSION_STRING = 1.0 - LIBRARY_CLASS = GdbSerialLib - - CONSTRUCTOR = GdbSerialLibConstructor - - -[Sources.common] - GdbSerialLib.c - - -[Packages] - MdePkg/MdePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - Omap35xxPkg/Omap35xxPkg.dec - -[LibraryClasses] - DebugLib - IoLib - OmapLib - -[FixedPcd] - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart - diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S deleted file mode 100644 index b656c1e040c5..000000000000 --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S +++ /dev/null @@ -1,85 +0,0 @@ -#------------------------------------------------------------------------------ -# -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#------------------------------------------------------------------------------ - -#include <AsmMacroIoLib.h> -#include <Library/PcdLib.h> - -.text -.align 3 - -.globl ASM_PFX(CEntryPoint) -GCC_ASM_EXPORT(_ModuleEntryPoint) - -ASM_PFX(_ModuleEntryPoint): - - //Disable L2 cache - mrc p15, 0, r0, c1, c0, 1 // read Auxiliary Control Register - bic r0, r0, #0x00000002 // disable L2 cache - mcr p15, 0, r0, c1, c0, 1 // store Auxiliary Control Register - - //Enable Strict alignment checking & Instruction cache - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000005 /* clear bits 0, 2 (---- -C-M) */ - orr r0, r0, #0x00000002 /* set bit 1 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) enable I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - // Enable NEON register in case folks want to use them for optimizations (CopyMem) - mrc p15, 0, r0, c1, c0, 2 - orr r0, r0, #0x00f00000 // Enable VPF access (V* instructions) - mcr p15, 0, r0, c1, c0, 2 - mov r0, #0x40000000 // Set EN bit in FPEXC - mcr p10,#0x7,r0,c8,c0,#0 // msr FPEXC,r0 in ARM assembly - - - // Set CPU vectors to start of DRAM - LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base - mcr p15, 0, r0, c12, c0, 0 - isb // Sync changes to control registers - - // Fill vector table with branchs to current pc (jmp $) - ldr r1, ShouldNeverGetHere - movs r2, #0 -FillVectors: - str r1, [r0, r2] - adds r2, r2, #4 - cmp r2, #32 - bne FillVectors - - /* before we call C code, lets setup the stack pointer in internal RAM */ -stack_pointer_setup: - - // - // Set stack based on PCD values. Need to do it this way to make C code work - // when it runs from FLASH. - // - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2) /* stack base arg2 */ - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3) /* stack size arg3 */ - add r4, r2, r3 - - //Enter SVC mode and set up SVC stack pointer - mov r0,#0x13|0x80|0x40 - msr CPSR_c,r0 - mov r13,r4 - - // Call C entry point - LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1) /* memory size arg1 */ - LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0) /* memory size arg0 */ - blx ASM_PFX(CEntryPoint) /* Assume C code is thumb */ - -ShouldNeverGetHere: - /* _CEntryPoint should never return */ - b ShouldNeverGetHere - diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm deleted file mode 100644 index 63174d4b8437..000000000000 --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm +++ /dev/null @@ -1,89 +0,0 @@ -//------------------------------------------------------------------------------ -// -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> -// -// This program and the accompanying materials -// are licensed and made available under the terms and conditions of the BSD License -// which accompanies this distribution. The full text of the license may be found at -// http://opensource.org/licenses/bsd-license.php -// -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -// -//------------------------------------------------------------------------------ - -#include <AsmMacroIoLib.h> -#include <Library/PcdLib.h> -#include <AutoGen.h> - INCLUDE AsmMacroIoLib.inc - - IMPORT CEntryPoint - EXPORT _ModuleEntryPoint - - PRESERVE8 - AREA ModuleEntryPoint, CODE, READONLY - - -_ModuleEntryPoint - - //Disable L2 cache - mrc p15, 0, r0, c1, c0, 1 // read Auxiliary Control Register - bic r0, r0, #0x00000002 // disable L2 cache - mcr p15, 0, r0, c1, c0, 1 // store Auxiliary Control Register - - //Enable Strict alignment checking & Instruction cache - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000005 /* clear bits 0, 2 (---- -C-M) */ - orr r0, r0, #0x00000002 /* set bit 1 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) enable I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - // Enable NEON register in case folks want to use them for optimizations (CopyMem) - mrc p15, 0, r0, c1, c0, 2 - orr r0, r0, #0x00f00000 // Enable VPF access (V* instructions) - mcr p15, 0, r0, c1, c0, 2 - mov r0, #0x40000000 // Set EN bit in FPEXC - msr FPEXC,r0 - - // Set CPU vectors to start of DRAM - LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base - mcr p15, 0, r0, c12, c0, 0 - isb // Sync changes to control registers - - // Fill vector table with branchs to current pc (jmp $) - ldr r1, ShouldNeverGetHere - movs r2, #0 -FillVectors - str r1, [r0, r2] - adds r2, r2, #4 - cmp r2, #32 - bne FillVectors - - /* before we call C code, lets setup the stack pointer in internal RAM */ -stack_pointer_setup - - // - // Set stack based on PCD values. Need to do it this way to make C code work - // when it runs from FLASH. - // - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2) // stack base arg2 - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3) // stack size arg3 - add r4, r2, r3 - - //Enter SVC mode and set up SVC stack pointer - mov r5,#0x13|0x80|0x40 - msr CPSR_c,r5 - mov r13,r4 - - // Call C entry point - LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1) // memory size arg1 - LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0) // memory start arg0 - blx CEntryPoint // Assume C code is thumb - -ShouldNeverGetHere - /* _CEntryPoint should never return */ - b ShouldNeverGetHere - - END - diff --git a/BeagleBoardPkg/Sec/Cache.c b/BeagleBoardPkg/Sec/Cache.c deleted file mode 100644 index 7399eef5be7c..000000000000 --- a/BeagleBoardPkg/Sec/Cache.c +++ /dev/null @@ -1,79 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <PiPei.h> - -#include <Library/ArmLib.h> -#include <Library/PrePiLib.h> -#include <Library/PcdLib.h> - -// DDR attributes -#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK -#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED - -// SoC registers. L3 interconnects -#define SOC_REGISTERS_L3_PHYSICAL_BASE 0x68000000 -#define SOC_REGISTERS_L3_PHYSICAL_LENGTH 0x08000000 -#define SOC_REGISTERS_L3_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE - -// SoC registers. L4 interconnects -#define SOC_REGISTERS_L4_PHYSICAL_BASE 0x48000000 -#define SOC_REGISTERS_L4_PHYSICAL_LENGTH 0x08000000 -#define SOC_REGISTERS_L4_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE - -VOID -InitCache ( - IN UINT32 MemoryBase, - IN UINT32 MemoryLength - ) -{ - UINT32 CacheAttributes; - ARM_MEMORY_REGION_DESCRIPTOR MemoryTable[5]; - VOID *TranslationTableBase; - UINTN TranslationTableSize; - - if (FeaturePcdGet(PcdCacheEnable) == TRUE) { - CacheAttributes = DDR_ATTRIBUTES_CACHED; - } else { - CacheAttributes = DDR_ATTRIBUTES_UNCACHED; - } - - // DDR - MemoryTable[0].PhysicalBase = MemoryBase; - MemoryTable[0].VirtualBase = MemoryBase; - MemoryTable[0].Length = MemoryLength; - MemoryTable[0].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)CacheAttributes; - - // SOC Registers. L3 interconnects - MemoryTable[1].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE; - MemoryTable[1].VirtualBase = SOC_REGISTERS_L3_PHYSICAL_BASE; - MemoryTable[1].Length = SOC_REGISTERS_L3_PHYSICAL_LENGTH; - MemoryTable[1].Attributes = SOC_REGISTERS_L3_ATTRIBUTES; - - // SOC Registers. L4 interconnects - MemoryTable[2].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE; - MemoryTable[2].VirtualBase = SOC_REGISTERS_L4_PHYSICAL_BASE; - MemoryTable[2].Length = SOC_REGISTERS_L4_PHYSICAL_LENGTH; - MemoryTable[2].Attributes = SOC_REGISTERS_L4_ATTRIBUTES; - - // End of Table - MemoryTable[3].PhysicalBase = 0; - MemoryTable[3].VirtualBase = 0; - MemoryTable[3].Length = 0; - MemoryTable[3].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0; - - ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize); - - BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData); -} diff --git a/BeagleBoardPkg/Sec/Clock.c b/BeagleBoardPkg/Sec/Clock.c deleted file mode 100644 index 24fdc71c420f..000000000000 --- a/BeagleBoardPkg/Sec/Clock.c +++ /dev/null @@ -1,70 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <Library/IoLib.h> -#include <Library/DebugLib.h> - -#include <Omap3530/Omap3530.h> - -VOID -ClockInit ( - VOID - ) -{ - //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses. - - // Enable PLL5 and set to 120 MHz as a reference clock. - MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13)); - MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1)); - MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE); - - // Turn on functional & interface clocks to the USBHOST power domain - MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE - | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE); - MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE); - - // Turn on functional & interface clocks to the USBTLL block. - MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE); - MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE); - - // Turn on functional & interface clocks to MMC1 and I2C1 modules. - MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE - | CM_FCLKEN1_CORE_EN_I2C1_ENABLE); - MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE - | CM_ICLKEN1_CORE_EN_I2C1_ENABLE); - - // Turn on functional & interface clocks to various Peripherals. - MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE - | CM_FCLKEN_PER_EN_GPT3_ENABLE - | CM_FCLKEN_PER_EN_GPT4_ENABLE - | CM_FCLKEN_PER_EN_GPIO2_ENABLE - | CM_FCLKEN_PER_EN_GPIO3_ENABLE - | CM_FCLKEN_PER_EN_GPIO4_ENABLE - | CM_FCLKEN_PER_EN_GPIO5_ENABLE - | CM_FCLKEN_PER_EN_GPIO6_ENABLE); - MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE - | CM_ICLKEN_PER_EN_GPT3_ENABLE - | CM_ICLKEN_PER_EN_GPT4_ENABLE - | CM_ICLKEN_PER_EN_GPIO2_ENABLE - | CM_ICLKEN_PER_EN_GPIO3_ENABLE - | CM_ICLKEN_PER_EN_GPIO4_ENABLE - | CM_ICLKEN_PER_EN_GPIO5_ENABLE - | CM_ICLKEN_PER_EN_GPIO6_ENABLE); - - // Turn on functional & inteface clocks to various wakeup modules. - MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE - | CM_FCLKEN_WKUP_EN_WDT2_ENABLE); - MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE - | CM_ICLKEN_WKUP_EN_WDT2_ENABLE); -} diff --git a/BeagleBoardPkg/Sec/LzmaDecompress.h b/BeagleBoardPkg/Sec/LzmaDecompress.h deleted file mode 100644 index a79ff343d231..000000000000 --- a/BeagleBoardPkg/Sec/LzmaDecompress.h +++ /dev/null @@ -1,103 +0,0 @@ -/** @file - LZMA Decompress Library header file - - Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __LZMA_DECOMPRESS_H___ -#define __LZMA_DECOMPRESS_H___ - -/** - Examines a GUIDed section and returns the size of the decoded buffer and the - size of an scratch buffer required to actually decode the data in a GUIDed section. - - Examines a GUIDed section specified by InputSection. - If GUID for InputSection does not match the GUID that this handler supports, - then RETURN_UNSUPPORTED is returned. - If the required information can not be retrieved from InputSection, - then RETURN_INVALID_PARAMETER is returned. - If the GUID of InputSection does match the GUID that this handler supports, - then the size required to hold the decoded buffer is returned in OututBufferSize, - the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field - from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute. - - If InputSection is NULL, then ASSERT(). - If OutputBufferSize is NULL, then ASSERT(). - If ScratchBufferSize is NULL, then ASSERT(). - If SectionAttribute is NULL, then ASSERT(). - - - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. - @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required - if the buffer specified by InputSection were decoded. - @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space - if the buffer specified by InputSection were decoded. - @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes - field of EFI_GUID_DEFINED_SECTION in the PI Specification. - - @retval RETURN_SUCCESS The information about InputSection was returned. - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. - @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection. - -**/ -RETURN_STATUS -EFIAPI -LzmaGuidedSectionGetInfo ( - IN CONST VOID *InputSection, - OUT UINT32 *OutputBufferSize, - OUT UINT32 *ScratchBufferSize, - OUT UINT16 *SectionAttribute - ); - -/** - Decompress a LZAM compressed GUIDed section into a caller allocated output buffer. - - Decodes the GUIDed section specified by InputSection. - If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned. - If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned. - If the GUID of InputSection does match the GUID that this handler supports, then InputSection - is decoded into the buffer specified by OutputBuffer and the authentication status of this - decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the - data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise, - the decoded data will be placed in caller allocated buffer specified by OutputBuffer. - - If InputSection is NULL, then ASSERT(). - If OutputBuffer is NULL, then ASSERT(). - If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT(). - If AuthenticationStatus is NULL, then ASSERT(). - - - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. - @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation. - @param[out] ScratchBuffer A caller allocated buffer that may be required by this function - as a scratch buffer to perform the decode operation. - @param[out] AuthenticationStatus - A pointer to the authentication status of the decoded output buffer. - See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI - section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must - never be set by this handler. - - @retval RETURN_SUCCESS The buffer specified by InputSection was decoded. - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. - @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded. - -**/ -RETURN_STATUS -EFIAPI -LzmaGuidedSectionExtraction ( - IN CONST VOID *InputSection, - OUT VOID **OutputBuffer, - OUT VOID *ScratchBuffer, OPTIONAL - OUT UINT32 *AuthenticationStatus - ); - -#endif // __LZMADECOMPRESS_H__ - diff --git a/BeagleBoardPkg/Sec/PadConfiguration.c b/BeagleBoardPkg/Sec/PadConfiguration.c deleted file mode 100644 index 2dace3bf38b4..000000000000 --- a/BeagleBoardPkg/Sec/PadConfiguration.c +++ /dev/null @@ -1,282 +0,0 @@ -/** @file - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <PiPei.h> -#include <Library/IoLib.h> -#include <Library/DebugLib.h> -#include <Omap3530/Omap3530.h> - -#define NUM_PINS 238 - -PAD_CONFIGURATION PadConfigurationTable[NUM_PINS] = { - //Pin, MuxMode, PullConfig, InputEnable - { SDRC_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D12, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D13, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D14, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D15, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D16, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D17, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D18, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D19, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D20, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D21, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D22, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D23, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D24, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D25, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D26, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D27, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D28, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D29, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D30, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_D31, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_CLK, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS0, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_CKE0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { SDRC_CKE1, MUXMODE7, PULL_DISABLED, INPUT }, - { SDRC_DQS1, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS2, MUXMODE0, PULL_DISABLED, INPUT }, - { SDRC_DQS3, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_A1, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A2, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A3, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A4, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A6, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A7, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A8, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A9, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_A10, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D12, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D13, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D14, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_D15, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NCS0, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NCS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS2, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS3, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS4, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { GPMC_NCS5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NCS6, MUXMODE1, PULL_DISABLED, INPUT }, - { GPMC_NCS7, MUXMODE1, PULL_UP_SELECTED, INPUT }, - { GPMC_CLK, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NADV_ALE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NOE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NWE, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NBE0_CLE, MUXMODE0, PULL_DISABLED, OUTPUT }, - { GPMC_NBE1, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_NWP, MUXMODE0, PULL_DISABLED, INPUT }, - { GPMC_WAIT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { GPMC_WAIT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { DSS_PCLK, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_HSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_PSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_ACBIAS, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA0, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA1, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA2, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA3, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA4, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA5, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA6, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA7, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA8, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA9, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA10, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA11, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA12, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA13, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA14, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA15, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA16, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA17, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA18, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA19, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA20, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA21, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA22, MUXMODE0, PULL_DISABLED, OUTPUT }, - { DSS_DATA23, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_HS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_VS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_XCLKA, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_PCLK, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { CAM_FLD, MUXMODE4, PULL_DISABLED, OUTPUT }, - { CAM_D0, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D1, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D2, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D3, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D4, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D5, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D6, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D7, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D8, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D9, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D10, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_D11, MUXMODE0, PULL_DISABLED, INPUT }, - { CAM_XCLKB, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CAM_WEN, MUXMODE4, PULL_DISABLED, INPUT }, - { CAM_STROBE, MUXMODE0, PULL_DISABLED, OUTPUT }, - { CSI2_DX0, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DY0, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DX1, MUXMODE0, PULL_DISABLED, INPUT }, - { CSI2_DY1, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_FSX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_CLKX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_DR, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP2_DX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { MMC1_CLK, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { MMC1_CMD, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT4, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT5, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT6, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC1_DAT7, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MMC2_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_CMD, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT0, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT1, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT3, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT4, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT5, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT6, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MMC2_DAT7, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCBSP3_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP3_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART2_CTS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { UART2_RTS, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART2_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART2_RX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART1_RTS, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_CTS, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART1_RX, MUXMODE0, PULL_DISABLED, INPUT }, - { MCBSP4_CLKX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_DR, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_DX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP4_FSX, MUXMODE1, PULL_DISABLED, INPUT }, - { MCBSP1_CLKR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_FSR, MUXMODE4, PULL_UP_SELECTED, OUTPUT }, - { MCBSP1_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_CLKS, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MCBSP1_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCBSP1_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, - { UART3_CTS_RCTX,MUXMODE0, PULL_UP_SELECTED, INPUT }, - { UART3_RTS_SD, MUXMODE0, PULL_DISABLED, OUTPUT }, - { UART3_RX_IRRX, MUXMODE0, PULL_DISABLED, INPUT }, - { UART3_TX_IRTX, MUXMODE0, PULL_DISABLED, OUTPUT }, - { HSUSB0_CLK, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_STP, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { HSUSB0_DIR, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_NXT, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA0, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA1, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA2, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA3, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA4, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA5, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA6, MUXMODE0, PULL_DISABLED, INPUT }, - { HSUSB0_DATA7, MUXMODE0, PULL_DISABLED, INPUT }, - { I2C1_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C1_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C2_SCL, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { I2C2_SDA, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { I2C3_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { I2C3_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { HDQ_SIO, MUXMODE4, PULL_UP_SELECTED, OUTPUT }, - { MCSPI1_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCSPI1_SIMO, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { MCSPI1_SOMI, MUXMODE0, PULL_DISABLED, INPUT }, - { MCSPI1_CS0, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { MCSPI1_CS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, - { MCSPI1_CS2, MUXMODE4, PULL_DISABLED, OUTPUT }, - { MCSPI1_CS3, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CLK, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_SIMO, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_SOMI, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CS0, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { MCSPI2_CS1, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { SYS_NIRQ, MUXMODE0, PULL_UP_SELECTED, INPUT }, - { SYS_CLKOUT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { ETK_CLK, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_CTL, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D0, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D1, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D2, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D3, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D4, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D5, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D6, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D7, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D8, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D9, MUXMODE4, PULL_UP_SELECTED, INPUT }, - { ETK_D10, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D11, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, - { ETK_D12, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D13, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D14, MUXMODE3, PULL_UP_SELECTED, INPUT }, - { ETK_D15, MUXMODE3, PULL_UP_SELECTED, INPUT } -}; - -VOID -PadConfiguration ( - VOID - ) -{ - UINTN Index; - UINT16 PadConfiguration; - UINTN NumPinsToConfigure = sizeof(PadConfigurationTable)/sizeof(PAD_CONFIGURATION); - - for (Index = 0; Index < NumPinsToConfigure; Index++) { - //Set up Pad configuration for particular pin. - PadConfiguration = (PadConfigurationTable[Index].MuxMode << MUXMODE_OFFSET); - PadConfiguration |= (PadConfigurationTable[Index].PullConfig << PULL_CONFIG_OFFSET); - PadConfiguration |= (PadConfigurationTable[Index].InputEnable << INPUTENABLE_OFFSET); - - //Configure the pin with specific Pad configuration. - MmioWrite16(PadConfigurationTable[Index].Pin, PadConfiguration); - } -} diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c deleted file mode 100644 index 0708396d9792..000000000000 --- a/BeagleBoardPkg/Sec/Sec.c +++ /dev/null @@ -1,186 +0,0 @@ -/** @file - C Entry point for the SEC. First C code after the reset vector. - - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> - - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include <PiPei.h> - -#include <Library/DebugLib.h> -#include <Library/PrePiLib.h> -#include <Library/PcdLib.h> -#include <Library/IoLib.h> -#include <Library/OmapLib.h> -#include <Library/ArmLib.h> -#include <Library/PeCoffGetEntryPointLib.h> -#include <Library/DebugAgentLib.h> - -#include <Ppi/GuidedSectionExtraction.h> -#include <Guid/LzmaDecompress.h> -#include <Omap3530/Omap3530.h> - -#include "LzmaDecompress.h" - -VOID -PadConfiguration ( - VOID - ); - -VOID -ClockInit ( - VOID - ); - - -VOID -TimerInit ( - VOID - ) -{ - UINTN Timer = FixedPcdGet32(PcdOmap35xxFreeTimer); - UINT32 TimerBaseAddress = TimerBase(Timer); - - // Set source clock for GPT3 & GPT4 to SYS_CLK - MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS); - - // Set count & reload registers - MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000); - MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000); - - // Disable interrupts - MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE); - - // Start Timer - MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); - - //Disable OMAP Watchdog timer (WDT2) - MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA); - DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n")); - MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555); -} - -VOID -UartInit ( - VOID - ) -{ - UINTN Uart = FixedPcdGet32(PcdOmap35xxConsoleUart); - UINT32 UartBaseAddress = UartBase(Uart); - - // Set MODE_SELECT=DISABLE before trying to initialize or modify DLL, DLH registers. - MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_DISABLE); - - // Put device in configuration mode. - MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_ENABLE); - - // Programmable divisor N = 48Mhz/16/115200 = 26 - MmioWrite32 (UartBaseAddress + UART_DLL_REG, 3000000/FixedPcdGet64 (PcdUartDefaultBaudRate)); // low divisor - MmioWrite32 (UartBaseAddress + UART_DLH_REG, 0); // high divisor - - // Enter into UART operational mode. - MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_DISABLE | UART_LCR_CHAR_LENGTH_8); - - // Force DTR and RTS output to active - MmioWrite32 (UartBaseAddress + UART_MCR_REG, UART_MCR_RTS_FORCE_ACTIVE | UART_MCR_DTR_FORCE_ACTIVE); - - // Clear & enable fifos - MmioWrite32 (UartBaseAddress + UART_FCR_REG, UART_FCR_TX_FIFO_CLEAR | UART_FCR_RX_FIFO_CLEAR | UART_FCR_FIFO_ENABLE); - - // Restore MODE_SELECT - MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_UART_16X); -} - -VOID -InitCache ( - IN UINT32 MemoryBase, - IN UINT32 MemoryLength - ); - -EFI_STATUS -EFIAPI -ExtractGuidedSectionLibConstructor ( - VOID - ); - -EFI_STATUS -EFIAPI -LzmaDecompressLibConstructor ( - VOID - ); - - -VOID -CEntryPoint ( - IN VOID *MemoryBase, - IN UINTN MemorySize, - IN VOID *StackBase, - IN UINTN StackSize - ) -{ - VOID *HobBase; - - // Build a basic HOB list - HobBase = (VOID *)(UINTN)(FixedPcdGet32(PcdEmbeddedFdBaseAddress) + FixedPcdGet32(PcdEmbeddedFdSize)); - CreateHobList (MemoryBase, MemorySize, HobBase, StackBase); - - //Set up Pin muxing. - PadConfiguration (); - - // Set up system clocking - ClockInit (); - - - // Enable program flow prediction, if supported. - ArmEnableBranchPrediction (); - - // Initialize CPU cache - InitCache ((UINT32)MemoryBase, (UINT32)MemorySize); - - // Add memory allocation hob for relocated FD - BuildMemoryAllocationHob (FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData); - - // Add the FVs to the hob list - BuildFvHob (PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize)); - - // Start talking - UartInit (); - - InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL, NULL); - SaveAndSetDebugTimerInterrupt (TRUE); - - DEBUG ((EFI_D_ERROR, "UART Enabled\n")); - - // Start up a free running timer so that the timer lib will work - TimerInit (); - - // SEC phase needs to run library constructors by hand. - ExtractGuidedSectionLibConstructor (); - LzmaDecompressLibConstructor (); - - // Build HOBs to pass up our version of stuff the DXE Core needs to save space - BuildPeCoffLoaderHob (); - BuildExtractSectionHob ( - &gLzmaCustomDecompressGuid, - LzmaGuidedSectionGetInfo, - LzmaGuidedSectionExtraction - ); - - // Assume the FV that contains the SEC (our code) also contains a compressed FV. - DecompressFirstFv (); - - // Load the DXE Core and transfer control to it - LoadDxeCoreFromFv (NULL, 0); - - // DXE Core should always load and never return - ASSERT (FALSE); -} - diff --git a/BeagleBoardPkg/Sec/Sec.inf b/BeagleBoardPkg/Sec/Sec.inf deleted file mode 100644 index eb6d93c000bb..000000000000 --- a/BeagleBoardPkg/Sec/Sec.inf +++ /dev/null @@ -1,73 +0,0 @@ - -#/** @file -# SEC - Reset vector code that jumps to C and loads DXE core -# -# Copyright (c) 2008, Apple Inc. All rights reserved.<BR> -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -# -#**/ - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = BeagleBoardSec - FILE_GUID = d959e387-7b91-452c-90e0-a1dbac90ddb8 - MODULE_TYPE = SEC - VERSION_STRING = 1.0 - - -[Sources.ARM] - Arm/ModuleEntryPoint.S | GCC - Arm/ModuleEntryPoint.asm | RVCT - -[Sources.ARM] - Sec.c - Cache.c - PadConfiguration.c - Clock.c - -[Packages] - MdePkg/MdePkg.dec - MdeModulePkg/MdeModulePkg.dec - EmbeddedPkg/EmbeddedPkg.dec - ArmPkg/ArmPkg.dec - Omap35xxPkg/Omap35xxPkg.dec - IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec - -[LibraryClasses] - BaseLib - DebugLib - ArmLib - IoLib - ExtractGuidedSectionLib - LzmaDecompressLib - OmapLib - PeCoffGetEntryPointLib - DebugAgentLib - MemoryAllocationLib - PrePiHobListPointerLib - -[FeaturePcd] - gEmbeddedTokenSpaceGuid.PcdCacheEnable - -[FixedPcd] - gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize - gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase - gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize - gEmbeddedTokenSpaceGuid.PcdPrePiStackSize - gEmbeddedTokenSpaceGuid.PcdPrePiStackBase - gEmbeddedTokenSpaceGuid.PcdMemoryBase - gEmbeddedTokenSpaceGuid.PcdMemorySize - - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart - gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer - - gArmTokenSpaceGuid.PcdCpuVectorBaseAddress - -- 2.7.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] BeagleBoardPkg: remove unused modules 2016-10-25 16:37 ` [PATCH 1/3] BeagleBoardPkg: remove unused modules Ard Biesheuvel @ 2016-10-25 17:40 ` Leif Lindholm 0 siblings, 0 replies; 8+ messages in thread From: Leif Lindholm @ 2016-10-25 17:40 UTC (permalink / raw) To: Ard Biesheuvel; +Cc: edk2-devel, lersek On Tue, Oct 25, 2016 at 05:37:18PM +0100, Ard Biesheuvel wrote: > Commit 0bade1054db7 ("BeagleBoardPkg: Replaced the original DSC/FDF files > by their new versions that use the ARM Platform Framework"), which dates > back to 2011, modified BeagleBoardPkg to replace references to its Sec.inf, > Bds.inf and some of its library implementations to refer to versions under > ArmPlatformPkg instead. Since the original modules have been unused ever > since, we can safely remove them now. > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > --- > BeagleBoardPkg/Bds/Bds.inf | 65 ----- > BeagleBoardPkg/Bds/BdsEntry.c | 242 ---------------- > BeagleBoardPkg/Bds/BdsEntry.h | 66 ----- > BeagleBoardPkg/Bds/FirmwareVolume.c | 150 ---------- > BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c | 299 -------------------- > BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf | 53 ---- > BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c | 103 ------- > BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf | 41 --- > BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S | 85 ------ > BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm | 89 ------ > BeagleBoardPkg/Sec/Cache.c | 79 ------ > BeagleBoardPkg/Sec/Clock.c | 70 ----- > BeagleBoardPkg/Sec/LzmaDecompress.h | 103 ------- > BeagleBoardPkg/Sec/PadConfiguration.c | 282 ------------------ > BeagleBoardPkg/Sec/Sec.c | 186 ------------ > BeagleBoardPkg/Sec/Sec.inf | 73 ----- > 16 files changed, 1986 deletions(-) > > diff --git a/BeagleBoardPkg/Bds/Bds.inf b/BeagleBoardPkg/Bds/Bds.inf > deleted file mode 100644 > index 2b20a09549d5..000000000000 > --- a/BeagleBoardPkg/Bds/Bds.inf > +++ /dev/null > @@ -1,65 +0,0 @@ > - > -#/** @file > -# > -# Component description file for Bds module > -# > -# Copyright (c) 2009, Apple Inc. All rights reserved.<BR> > -# > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD License > -# which accompanies this distribution. The full text of the license may be found at > -# http://opensource.org/licenses/bsd-license.php > -# > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -# > -#**/ > - > -[Defines] > - INF_VERSION = 0x00010005 > - BASE_NAME = BeagleBoardBds > - FILE_GUID = 934431fe-5745-402e-913d-17b4434eb0f3 > - MODULE_TYPE = DXE_DRIVER > - VERSION_STRING = 1.0 > - > - ENTRY_POINT = BdsInitialize > - > -[Sources.common] > - BdsEntry.c > - FirmwareVolume.c > - > -[Packages] > - MdePkg/MdePkg.dec > - EmbeddedPkg/EmbeddedPkg.dec > - > -[LibraryClasses] > - DevicePathLib > - BaseLib > - HobLib > - UefiRuntimeServicesTableLib > - ReportStatusCodeLib > - PerformanceLib > - DxeServicesTableLib > - MemoryAllocationLib > - UefiLib > - UefiBootServicesTableLib > - BaseMemoryLib > - DebugLib > - PrintLib > - UefiDriverEntryPoint > - > -[Guids] > - > - > -[Protocols] > - gEfiBdsArchProtocolGuid > - gEfiSimpleTextInProtocolGuid > - gEfiSimpleTextOutProtocolGuid > - gEfiSerialIoProtocolGuid > - gEfiDevicePathProtocolGuid > - gEfiSimpleFileSystemProtocolGuid > - gEfiUsbIoProtocolGuid > - gEfiFirmwareVolume2ProtocolGuid > - > -[Depex] > - TRUE > diff --git a/BeagleBoardPkg/Bds/BdsEntry.c b/BeagleBoardPkg/Bds/BdsEntry.c > deleted file mode 100644 > index f2f1ae3983a6..000000000000 > --- a/BeagleBoardPkg/Bds/BdsEntry.c > +++ /dev/null > @@ -1,242 +0,0 @@ > -/** @file > - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements > - of the UEFI specification as it is designed to implement an embedded systmes > - propriatary boot scheme. > - > - This template assume a DXE driver produces a SerialIo protocol not using the EFI > - driver module and it will attempt to connect a console on top of this. > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include "BdsEntry.h" > - > - > -BOOLEAN gConsolePresent = FALSE; > - > -EFI_BDS_ARCH_PROTOCOL gBdsProtocol = { > - BdsEntry, > -}; > - > - > - > - > -/** > - This function uses policy data from the platform to determine what operating > - system or system utility should be loaded and invoked. This function call > - also optionally make the use of user input to determine the operating system > - or system utility to be loaded and invoked. When the DXE Core has dispatched > - all the drivers on the dispatch queue, this function is called. This > - function will attempt to connect the boot devices required to load and invoke > - the selected operating system or system utility. During this process, > - additional firmware volumes may be discovered that may contain addition DXE > - drivers that can be dispatched by the DXE Core. If a boot device cannot be > - fully connected, this function calls the DXE Service Dispatch() to allow the > - DXE drivers from any newly discovered firmware volumes to be dispatched. > - Then the boot device connection can be attempted again. If the same boot > - device connection operation fails twice in a row, then that boot device has > - failed, and should be skipped. This function should never return. > - > - @param This The EFI_BDS_ARCH_PROTOCOL instance. > - > - @return None. > - > -**/ > -VOID > -EFIAPI > -BdsEntry ( > - IN EFI_BDS_ARCH_PROTOCOL *This > - ) > -{ > - EFI_STATUS Status; > - UINTN NoHandles; > - EFI_HANDLE *Buffer; > - EFI_HANDLE FvHandle; > - EFI_HANDLE ImageHandle; > - EFI_HANDLE UsbDeviceHandle; > - EFI_GUID NameGuid; > - UINTN Size; > - UINTN HandleCount; > - UINTN OldHandleCount; > - EFI_HANDLE *HandleBuffer; > - UINTN Index; > - EFI_DEVICE_PATH_PROTOCOL *LoadImageDevicePath; > - EFI_DEVICE_PATH_PROTOCOL *FileSystemDevicePath; > - > - PERF_END (NULL, "DXE", NULL, 0); > - PERF_START (NULL, "BDS", NULL, 0); > - > - > - // > - // Now do the EFI stuff > - // > - Size = 0x100; > - gST->FirmwareVendor = AllocateRuntimePool (Size); > - ASSERT (gST->FirmwareVendor != NULL); > - > - UnicodeSPrint (gST->FirmwareVendor, Size, L"BeagleBoard EFI %a %a", __DATE__, __TIME__); > - > - // > - // Now we need to setup the EFI System Table with information about the console devices. > - // This code is normally in the console spliter driver on platforms that support multiple > - // consoles at the same time > - // > - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextOutProtocolGuid, NULL, &NoHandles, &Buffer); > - if (!EFI_ERROR (Status)) { > - // Use the first SimpleTextOut we find and update the EFI System Table > - gST->ConsoleOutHandle = Buffer[0]; > - gST->StandardErrorHandle = Buffer[0]; > - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextOutProtocolGuid, (VOID **)&gST->ConOut); > - ASSERT_EFI_ERROR (Status); > - > - gST->StdErr = gST->ConOut; > - > - gST->ConOut->OutputString (gST->ConOut, L"BDS: Console Started!!!!\n\r"); > - FreePool (Buffer); > - > - gConsolePresent = TRUE; > - } > - > - > - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiSimpleTextInProtocolGuid, NULL, &NoHandles, &Buffer); > - if (!EFI_ERROR (Status)) { > - // Use the first SimpleTextIn we find and update the EFI System Table > - gST->ConsoleInHandle = Buffer[0]; > - Status = gBS->HandleProtocol (Buffer[0], &gEfiSimpleTextInProtocolGuid, (VOID **)&gST->ConIn); > - ASSERT_EFI_ERROR (Status); > - > - FreePool (Buffer); > - } > - > - // > - // We now have EFI Consoles up and running. Print () will work now. DEBUG () and ASSERT () worked > - // prior to this point as they were configured to use a more primative output scheme. > - // > - > - // > - //Perform Connect > - // > - HandleCount = 0; > - while (1) { > - OldHandleCount = HandleCount; > - Status = gBS->LocateHandleBuffer ( > - AllHandles, > - NULL, > - NULL, > - &HandleCount, > - &HandleBuffer > - ); > - if (EFI_ERROR (Status)) { > - break; > - } > - > - if (HandleCount == OldHandleCount) { > - break; > - } > - > - for (Index = 0; Index < HandleCount; Index++) { > - gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE); > - } > - } > - > - EfiSignalEventReadyToBoot (); > - > - //Locate handles for SimpleFileSystem protocol > - Status = gBS->LocateHandleBuffer ( > - ByProtocol, > - &gEfiSimpleFileSystemProtocolGuid, > - NULL, > - &HandleCount, > - &HandleBuffer > - ); > - if (!EFI_ERROR(Status)) { > - for (Index = 0; Index < HandleCount; Index++) { > - //Get the device path > - FileSystemDevicePath = DevicePathFromHandle(HandleBuffer[Index]); > - if (FileSystemDevicePath == NULL) { > - continue; > - } > - > - //Check if UsbIo is on any handles in the device path. > - Status = gBS->LocateDevicePath(&gEfiUsbIoProtocolGuid, &FileSystemDevicePath, &UsbDeviceHandle); > - if (EFI_ERROR(Status)) { > - continue; > - } > - > - //Check if Usb stick has a magic EBL file. > - LoadImageDevicePath = FileDevicePath(HandleBuffer[Index], L"Ebl.efi"); > - Status = gBS->LoadImage (TRUE, gImageHandle, LoadImageDevicePath, NULL, 0, &ImageHandle); > - if (EFI_ERROR(Status)) { > - continue; > - } > - > - //Boot to Shell on USB stick. > - Status = gBS->StartImage (ImageHandle, NULL, NULL); > - if (EFI_ERROR(Status)) { > - continue; > - } > - } > - } > - > - // > - // Normal UEFI behavior is to process Globally Defined Variables as defined in Chapter 3 > - // (Boot Manager) of the UEFI specification. For this embedded system we don't do this. > - // > - > - // > - // Search all the FVs for an application with a UI Section of Ebl. A .FDF file can be used > - // to control the names of UI sections in an FV. > - // > - Status = FindApplicationMatchingUiSection (L"Ebl", &FvHandle, &NameGuid); > - if (!EFI_ERROR (Status)) { > - > - //Boot to Shell. > - Status = LoadPeCoffSectionFromFv (FvHandle, &NameGuid); > - > - if (EFI_ERROR(Status)) { > - DEBUG((EFI_D_ERROR, "Boot from Shell failed. Status: %r\n", Status)); > - } > - } > - > - // > - // EFI does not define the behaviour if all boot attemps fail and the last one returns. > - // So we make a policy choice to reset the system since this BDS does not have a UI. > - // > - gRT->ResetSystem (EfiResetShutdown, Status, 0, NULL); > - > - return ; > -} > - > - > -EFI_STATUS > -EFIAPI > -BdsInitialize ( > - IN EFI_HANDLE ImageHandle, > - IN EFI_SYSTEM_TABLE *SystemTable > - ) > -{ > - EFI_STATUS Status; > - > - // > - // Install protocol interface > - // > - Status = gBS->InstallMultipleProtocolInterfaces ( > - &ImageHandle, > - &gEfiBdsArchProtocolGuid, &gBdsProtocol, > - NULL > - ); > - ASSERT_EFI_ERROR (Status); > - > - return Status; > -} > - > - > diff --git a/BeagleBoardPkg/Bds/BdsEntry.h b/BeagleBoardPkg/Bds/BdsEntry.h > deleted file mode 100644 > index 646f7b276d45..000000000000 > --- a/BeagleBoardPkg/Bds/BdsEntry.h > +++ /dev/null > @@ -1,66 +0,0 @@ > -/** @file > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#ifndef __BDS_ENTRY_H__ > -#define __BDS_ENTRY_H__ > - > -#include <PiDxe.h> > -#include <Library/BaseLib.h> > -#include <Library/DebugLib.h> > -#include <Library/PrintLib.h> > -#include <Library/BaseMemoryLib.h> > -#include <Library/UefiBootServicesTableLib.h> > -#include <Library/UefiLib.h> > -#include <Library/MemoryAllocationLib.h> > -#include <Library/DxeServicesTableLib.h> > -#include <Library/UefiRuntimeServicesTableLib.h> > -#include <Library/HobLib.h> > -#include <Library/DevicePathLib.h> > -#include <Library/PcdLib.h> > -#include <Library/MemoryAllocationLib.h> > -#include <Library/PrintLib.h> > -#include <Library/PerformanceLib.h> > - > -#include <Protocol/Bds.h> > -#include <Protocol/SerialIo.h> > -#include <Protocol/FirmwareVolume2.h> > -#include <Protocol/SimpleTextIn.h> > -#include <Protocol/SimpleTextOut.h> > -#include <Protocol/EmbeddedDevice.h> > -#include <Protocol/DevicePath.h> > -#include <Protocol/SimpleFileSystem.h> > -#include <Protocol/UsbIo.h> > - > - > -EFI_STATUS > -LoadPeCoffSectionFromFv ( > - IN EFI_HANDLE FvHandle, > - IN EFI_GUID *NameGuid > - ); > - > -EFI_STATUS > -FindApplicationMatchingUiSection ( > - IN CHAR16 *UiString, > - OUT EFI_HANDLE *FvHandle, > - OUT EFI_GUID *NameGuid > - ); > - > -VOID > -EFIAPI > -BdsEntry ( > - IN EFI_BDS_ARCH_PROTOCOL *This > - ); > - > -#endif > - > diff --git a/BeagleBoardPkg/Bds/FirmwareVolume.c b/BeagleBoardPkg/Bds/FirmwareVolume.c > deleted file mode 100644 > index 31e1c5100eff..000000000000 > --- a/BeagleBoardPkg/Bds/FirmwareVolume.c > +++ /dev/null > @@ -1,150 +0,0 @@ > -/** @file > - The entry of the embedded BDS. This BDS does not follow the Boot Manager requirements > - of the UEFI specification as it is designed to implement an embedded systmes > - propriatary boot scheme. > - > - This template assume a DXE driver produces a SerialIo protocol not using the EFI > - driver module and it will attempt to connect a console on top of this. > - > - > - Copyright (c) 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include "BdsEntry.h" > - > - > -EFI_STATUS > -FindApplicationMatchingUiSection ( > - IN CHAR16 *UiString, > - OUT EFI_HANDLE *FvHandle, > - OUT EFI_GUID *NameGuid > - ) > -{ > - EFI_STATUS Status; > - EFI_STATUS NextStatus; > - UINTN NoHandles; > - EFI_HANDLE *Buffer; > - UINTN Index; > - EFI_FV_FILETYPE FileType; > - EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv; > - VOID *Key; > - EFI_FV_FILE_ATTRIBUTES Attributes; > - UINTN Size; > - UINTN UiStringLen; > - CHAR16 *UiSection; > - UINT32 Authentication; > - > - > - UiStringLen = 0; > - if (UiString != NULL) { > - DEBUG ((DEBUG_ERROR, "UiString %s\n", UiString)); > - UiStringLen = StrLen (UiString); > - } > - > - Status = gBS->LocateHandleBuffer (ByProtocol, &gEfiFirmwareVolume2ProtocolGuid, NULL, &NoHandles, &Buffer); > - if (!EFI_ERROR (Status)) { > - for (Index = 0; Index < NoHandles; Index++) { > - Status = gBS->HandleProtocol (Buffer[Index], &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv); > - if (!EFI_ERROR (Status)) { > - Key = AllocatePool (Fv->KeySize); > - ASSERT (Key != NULL); > - ZeroMem (Key, Fv->KeySize); > - > - FileType = EFI_FV_FILETYPE_APPLICATION; > - > - do { > - NextStatus = Fv->GetNextFile (Fv, Key, &FileType, NameGuid, &Attributes, &Size); > - if (!EFI_ERROR (NextStatus)) { > - if (UiString == NULL) { > - // > - // If UiString is NULL match first application we find. > - // > - *FvHandle = Buffer[Index]; > - FreePool (Key); > - return Status; > - } > - > - UiSection = NULL; > - Status = Fv->ReadSection ( > - Fv, > - NameGuid, > - EFI_SECTION_USER_INTERFACE, > - 0, > - (VOID **)&UiSection, > - &Size, > - &Authentication > - ); > - if (!EFI_ERROR (Status)) { > - if (StrnCmp (UiString, UiSection, UiStringLen) == 0) { > - // > - // We found a UiString match. > - // > - *FvHandle = Buffer[Index]; > - FreePool (Key); > - FreePool (UiSection); > - return Status; > - } > - FreePool (UiSection); > - } > - } > - } while (!EFI_ERROR (NextStatus)); > - > - FreePool (Key); > - } > - } > - > - FreePool (Buffer); > - } > - > - return EFI_NOT_FOUND; > -} > - > - > -EFI_DEVICE_PATH * > -FvFileDevicePath ( > - IN EFI_HANDLE FvHandle, > - IN EFI_GUID *NameGuid > - ) > -{ > - EFI_DEVICE_PATH_PROTOCOL *DevicePath; > - MEDIA_FW_VOL_FILEPATH_DEVICE_PATH NewNode; > - > - DevicePath = DevicePathFromHandle (FvHandle); > - > - EfiInitializeFwVolDevicepathNode (&NewNode, NameGuid); > - > - return AppendDevicePathNode (DevicePath, (EFI_DEVICE_PATH_PROTOCOL *)&NewNode); > -} > - > - > - > -EFI_STATUS > -LoadPeCoffSectionFromFv ( > - IN EFI_HANDLE FvHandle, > - IN EFI_GUID *NameGuid > - ) > -{ > - EFI_STATUS Status; > - EFI_DEVICE_PATH_PROTOCOL *DevicePath; > - EFI_HANDLE ImageHandle; > - > - DevicePath = FvFileDevicePath (FvHandle, NameGuid); > - > - Status = gBS->LoadImage (TRUE, gImageHandle, DevicePath, NULL, 0, &ImageHandle); > - if (!EFI_ERROR (Status)) { > - PERF_END (NULL, "BDS", NULL, 0); > - Status = gBS->StartImage (ImageHandle, NULL, NULL); > - } > - > - return Status; > -} > - > diff --git a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c b/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c > deleted file mode 100644 > index 46204a4386b6..000000000000 > --- a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c > +++ /dev/null > @@ -1,299 +0,0 @@ > -/** @file > - Add custom commands for BeagleBoard development. > - > - Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <PiDxe.h> > -#include <Library/ArmLib.h> > -#include <Library/CacheMaintenanceLib.h> > -#include <Library/EblCmdLib.h> > -#include <Library/BaseLib.h> > -#include <Library/DebugLib.h> > -#include <Library/UefiBootServicesTableLib.h> > -#include <Library/UefiRuntimeServicesTableLib.h> > -#include <Library/MemoryAllocationLib.h> > -#include <Library/UefiLib.h> > -#include <Library/PcdLib.h> > -#include <Library/EfiFileLib.h> > -#include <Library/ArmDisassemblerLib.h> > -#include <Library/PeCoffGetEntryPointLib.h> > -#include <Library/PerformanceLib.h> > -#include <Library/TimerLib.h> > - > -#include <Guid/DebugImageInfoTable.h> > - > -#include <Protocol/DebugSupport.h> > -#include <Protocol/LoadedImage.h> > - > -/** > - Simple arm disassembler via a library > - > - Argv[0] - symboltable > - Argv[1] - Optional quoted format string > - Argv[2] - Optional flag > - > - @param Argc Number of command arguments in Argv > - @param Argv Array of strings that represent the parsed command line. > - Argv[0] is the command name > - > - @return EFI_SUCCESS > - > -**/ > -EFI_STATUS > -EblSymbolTable ( > - IN UINTN Argc, > - IN CHAR8 **Argv > - ) > -{ > - EFI_STATUS Status; > - EFI_DEBUG_IMAGE_INFO_TABLE_HEADER *DebugImageTableHeader = NULL; > - EFI_DEBUG_IMAGE_INFO *DebugTable; > - UINTN Entry; > - CHAR8 *Format; > - CHAR8 *Pdb; > - UINT32 PeCoffSizeOfHeaders; > - UINT32 ImageBase; > - BOOLEAN Elf; > - > - // Need to add lots of error checking on the passed in string > - // Default string is for RealView debugger or gdb depending on toolchain used. > - if (Argc > 1) { > - Format = Argv[1]; > - } else { > -#if __GNUC__ > - // Assume gdb > - Format = "add-symbol-file %a 0x%x"; > -#else > - // Default to RVCT > - Format = "load /a /ni /np %a &0x%x"; > -#endif > - } > - Elf = (Argc > 2) ? FALSE : TRUE; > - > - Status = EfiGetSystemConfigurationTable (&gEfiDebugImageInfoTableGuid, (VOID **)&DebugImageTableHeader); > - if (EFI_ERROR (Status)) { > - return Status; > - } > - > - DebugTable = DebugImageTableHeader->EfiDebugImageInfoTable; > - if (DebugTable == NULL) { > - return EFI_SUCCESS; > - } > - > - for (Entry = 0; Entry < DebugImageTableHeader->TableSize; Entry++, DebugTable++) { > - if (DebugTable->NormalImage != NULL) { > - if ((DebugTable->NormalImage->ImageInfoType == EFI_DEBUG_IMAGE_INFO_TYPE_NORMAL) && (DebugTable->NormalImage->LoadedImageProtocolInstance != NULL)) { > - ImageBase = (UINT32)DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase; > - PeCoffSizeOfHeaders = PeCoffGetSizeOfHeaders ((VOID *)(UINTN)ImageBase); > - Pdb = PeCoffLoaderGetPdbPointer (DebugTable->NormalImage->LoadedImageProtocolInstance->ImageBase); > - if (Pdb != NULL) { > - if (Elf) { > - // ELF and Mach-O images don't include the header so the linked address does not include header > - ImageBase += PeCoffSizeOfHeaders; > - } > - AsciiPrint (Format, Pdb, ImageBase); > - AsciiPrint ("\n"); > - } else { > - } > - } > - } > - } > - > - return EFI_SUCCESS; > -} > - > - > -/** > - Simple arm disassembler via a library > - > - Argv[0] - disasm > - Argv[1] - Address to start disassembling from > - ARgv[2] - Number of instructions to disassembly (optional) > - > - @param Argc Number of command arguments in Argv > - @param Argv Array of strings that represent the parsed command line. > - Argv[0] is the command name > - > - @return EFI_SUCCESS > - > -**/ > -EFI_STATUS > -EblDisassembler ( > - IN UINTN Argc, > - IN CHAR8 **Argv > - ) > -{ > - UINT8 *Ptr, *CurrentAddress; > - UINT32 Address; > - UINT32 Count; > - CHAR8 Buffer[80]; > - UINT32 ItBlock; > - > - if (Argc < 2) { > - return EFI_INVALID_PARAMETER; > - } > - > - Address = AsciiStrHexToUintn (Argv[1]); > - Count = (Argc > 2) ? (UINT32)AsciiStrHexToUintn (Argv[2]) : 20; > - > - Ptr = (UINT8 *)(UINTN)Address; > - ItBlock = 0; > - do { > - CurrentAddress = Ptr; > - DisassembleInstruction (&Ptr, TRUE, TRUE, &ItBlock, Buffer, sizeof (Buffer)); > - AsciiPrint ("0x%08x: %a\n", CurrentAddress, Buffer); > - } while (Count-- > 0); > - > - > - return EFI_SUCCESS; > -} > - > - > -CHAR8 * > -ImageHandleToPdbFileName ( > - IN EFI_HANDLE Handle > - ) > -{ > - EFI_STATUS Status; > - EFI_LOADED_IMAGE_PROTOCOL *LoadedImage; > - CHAR8 *Pdb; > - CHAR8 *StripLeading; > - > - Status = gBS->HandleProtocol (Handle, &gEfiLoadedImageProtocolGuid, (VOID **)&LoadedImage); > - if (EFI_ERROR (Status)) { > - return ""; > - } > - > - Pdb = PeCoffLoaderGetPdbPointer (LoadedImage->ImageBase); > - StripLeading = AsciiStrStr (Pdb, "\\ARM\\"); > - if (StripLeading == NULL) { > - StripLeading = AsciiStrStr (Pdb, "/ARM/"); > - if (StripLeading == NULL) { > - return Pdb; > - } > - } > - // Hopefully we hacked off the unneeded part > - return (StripLeading + 5); > -} > - > - > -CHAR8 *mTokenList[] = { > - "SEC", > - "PEI", > - "DXE", > - "BDS", > - NULL > -}; > - > -/** > - Simple arm disassembler via a library > - > - Argv[0] - disasm > - Argv[1] - Address to start disassembling from > - ARgv[2] - Number of instructions to disassembly (optional) > - > - @param Argc Number of command arguments in Argv > - @param Argv Array of strings that represent the parsed command line. > - Argv[0] is the command name > - > - @return EFI_SUCCESS > - > -**/ > -EFI_STATUS > -EblPerformance ( > - IN UINTN Argc, > - IN CHAR8 **Argv > - ) > -{ > - UINTN Key; > - CONST VOID *Handle; > - CONST CHAR8 *Token, *Module; > - UINT64 Start, Stop, TimeStamp; > - UINT64 Delta, TicksPerSecond, Milliseconds, Microseconds; > - UINTN Index; > - > - TicksPerSecond = GetPerformanceCounterProperties (NULL, NULL); > - > - Key = 0; > - do { > - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); > - if (Key != 0) { > - if (AsciiStriCmp ("StartImage:", Token) == 0) { > - if (Stop == 0) { > - // The entry for EBL is still running so the stop time will be zero. Skip it > - AsciiPrint (" running %a\n", ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); > - } else { > - Delta = Stop - Start; > - Microseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000000), TicksPerSecond, NULL); > - AsciiPrint ("%10ld us %a\n", Microseconds, ImageHandleToPdbFileName ((EFI_HANDLE)Handle)); > - } > - } > - } > - } while (Key != 0); > - > - AsciiPrint ("\n"); > - > - TimeStamp = 0; > - Key = 0; > - do { > - Key = GetPerformanceMeasurement (Key, (CONST VOID **)&Handle, &Token, &Module, &Start, &Stop); > - if (Key != 0) { > - for (Index = 0; mTokenList[Index] != NULL; Index++) { > - if (AsciiStriCmp (mTokenList[Index], Token) == 0) { > - Delta = Stop - Start; > - TimeStamp += Delta; > - Milliseconds = DivU64x64Remainder (MultU64x32 (Delta, 1000), TicksPerSecond, NULL); > - AsciiPrint ("%6a %6ld ms\n", Token, Milliseconds); > - break; > - } > - } > - } > - } while (Key != 0); > - > - AsciiPrint ("Total Time = %ld ms\n\n", DivU64x64Remainder (MultU64x32 (TimeStamp, 1000), TicksPerSecond, NULL)); > - > - return EFI_SUCCESS; > -} > - > - > -GLOBAL_REMOVE_IF_UNREFERENCED const EBL_COMMAND_TABLE mLibCmdTemplate[] = > -{ > - { > - "disasm address [count]", > - " disassemble count instructions", > - NULL, > - EblDisassembler > - }, > - { > - "performance", > - " Display boot performance info", > - NULL, > - EblPerformance > - }, > - { > - "symboltable [\"format string\"] [PECOFF]", > - " show symbol table commands for debugger", > - NULL, > - EblSymbolTable > - } > -}; > - > - > -VOID > -EblInitializeExternalCmd ( > - VOID > - ) > -{ > - EblAddCommands (mLibCmdTemplate, sizeof (mLibCmdTemplate)/sizeof (EBL_COMMAND_TABLE)); > - return; > -} > diff --git a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf b/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf > deleted file mode 100644 > index a79448c0e95b..000000000000 > --- a/BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf > +++ /dev/null > @@ -1,53 +0,0 @@ > -#/** @file > -# Component description file for the entry point to a EFIDXE Drivers > -# > -# Library to abstract Framework extensions that conflict with UEFI 2.0 Specification > -# Copyright (c) 2007 - 2007, Intel Corporation. All rights reserved.<BR> > -# > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD License > -# which accompanies this distribution. The full text of the license may be found at > -# http://opensource.org/licenses/bsd-license.php > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -# > -# > -#**/ > - > -[Defines] > - INF_VERSION = 0x00010005 > - BASE_NAME = BeagleBoardEblCmdLib > - FILE_GUID = ea62bdc3-1063-425f-8851-98cb47f213a8 > - MODULE_TYPE = UEFI_DRIVER > - VERSION_STRING = 1.0 > - LIBRARY_CLASS = EblCmdLib|DXE_DRIVER UEFI_APPLICATION UEFI_DRIVER > - > - > -# > -# The following information is for reference only and not required by the build tools. > -# > -# VALID_ARCHITECTURES = IA32 X64 IPF EBC > -# > - > -[Sources.common] > - EblCmdLib.c > - > -[Packages] > - MdePkg/MdePkg.dec > - MdeModulePkg/MdeModulePkg.dec > - EmbeddedPkg/EmbeddedPkg.dec > - ArmPkg/ArmPkg.dec > - > -[LibraryClasses] > - BaseLib > - DebugLib > - ArmDisassemblerLib > - PerformanceLib > - TimerLib > - > -[Protocols] > - gEfiDebugSupportProtocolGuid > - gEfiLoadedImageProtocolGuid > - > -[Guids] > - gEfiDebugImageInfoTableGuid > diff --git a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c b/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c > deleted file mode 100644 > index 82a2957dc97e..000000000000 > --- a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c > +++ /dev/null > @@ -1,103 +0,0 @@ > -/** @file > - Basic serial IO abstaction for GDB > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <Uefi.h> > -#include <Library/GdbSerialLib.h> > -#include <Library/PcdLib.h> > -#include <Library/IoLib.h> > -#include <Library/DebugLib.h> > -#include <Library/OmapLib.h> > -#include <Omap3530/Omap3530.h> > - > -RETURN_STATUS > -EFIAPI > -GdbSerialLibConstructor ( > - IN EFI_HANDLE ImageHandle, > - IN EFI_SYSTEM_TABLE *SystemTable > - ) > -{ > - return RETURN_SUCCESS; > -} > - > -RETURN_STATUS > -EFIAPI > -GdbSerialInit ( > - IN UINT64 BaudRate, > - IN UINT8 Parity, > - IN UINT8 DataBits, > - IN UINT8 StopBits > - ) > -{ > - return RETURN_SUCCESS; > -} > - > -BOOLEAN > -EFIAPI > -GdbIsCharAvailable ( > - VOID > - ) > -{ > - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; > - > - if ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_NOT_EMPTY) { > - return TRUE; > - } else { > - return FALSE; > - } > -} > - > -CHAR8 > -EFIAPI > -GdbGetChar ( > - VOID > - ) > -{ > - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; > - UINT32 RBR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_RBR_REG; > - CHAR8 Char; > - > - while ((MmioRead8(LSR) & UART_LSR_RX_FIFO_E_MASK) == UART_LSR_RX_FIFO_E_EMPTY); > - Char = MmioRead8(RBR); > - > - return Char; > -} > - > -VOID > -EFIAPI > -GdbPutChar ( > - IN CHAR8 Char > - ) > -{ > - UINT32 LSR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_LSR_REG; > - UINT32 THR = UartBase(PcdGet32(PcdOmap35xxConsoleUart)) + UART_THR_REG; > - > - while ((MmioRead8(LSR) & UART_LSR_TX_FIFO_E_MASK) == UART_LSR_TX_FIFO_E_NOT_EMPTY); > - MmioWrite8(THR, Char); > -} > - > -VOID > -GdbPutString ( > - IN CHAR8 *String > - ) > -{ > - while (*String != '\0') { > - GdbPutChar (*String); > - String++; > - } > -} > - > - > - > - > diff --git a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf b/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf > deleted file mode 100644 > index a06acf14fbcb..000000000000 > --- a/BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf > +++ /dev/null > @@ -1,41 +0,0 @@ > -#/** @file > -# > -# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD License > -# which accompanies this distribution. The full text of the license may be found at > -# http://opensource.org/licenses/bsd-license.php > -# > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -# > -#**/ > - > -[Defines] > - INF_VERSION = 0x00010005 > - BASE_NAME = GdbSerialLib > - FILE_GUID = E2423349-EF5D-439B-95F5-8B8D8E3B443F > - MODULE_TYPE = UEFI_DRIVER > - VERSION_STRING = 1.0 > - LIBRARY_CLASS = GdbSerialLib > - > - CONSTRUCTOR = GdbSerialLibConstructor > - > - > -[Sources.common] > - GdbSerialLib.c > - > - > -[Packages] > - MdePkg/MdePkg.dec > - EmbeddedPkg/EmbeddedPkg.dec > - Omap35xxPkg/Omap35xxPkg.dec > - > -[LibraryClasses] > - DebugLib > - IoLib > - OmapLib > - > -[FixedPcd] > - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart > - > diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S > deleted file mode 100644 > index b656c1e040c5..000000000000 > --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S > +++ /dev/null > @@ -1,85 +0,0 @@ > -#------------------------------------------------------------------------------ > -# > -# Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > -# > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD License > -# which accompanies this distribution. The full text of the license may be found at > -# http://opensource.org/licenses/bsd-license.php > -# > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -# > -#------------------------------------------------------------------------------ > - > -#include <AsmMacroIoLib.h> > -#include <Library/PcdLib.h> > - > -.text > -.align 3 > - > -.globl ASM_PFX(CEntryPoint) > -GCC_ASM_EXPORT(_ModuleEntryPoint) > - > -ASM_PFX(_ModuleEntryPoint): > - > - //Disable L2 cache > - mrc p15, 0, r0, c1, c0, 1 // read Auxiliary Control Register > - bic r0, r0, #0x00000002 // disable L2 cache > - mcr p15, 0, r0, c1, c0, 1 // store Auxiliary Control Register > - > - //Enable Strict alignment checking & Instruction cache > - mrc p15, 0, r0, c1, c0, 0 > - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ > - bic r0, r0, #0x00000005 /* clear bits 0, 2 (---- -C-M) */ > - orr r0, r0, #0x00000002 /* set bit 1 (A) Align */ > - orr r0, r0, #0x00001000 /* set bit 12 (I) enable I-Cache */ > - mcr p15, 0, r0, c1, c0, 0 > - > - // Enable NEON register in case folks want to use them for optimizations (CopyMem) > - mrc p15, 0, r0, c1, c0, 2 > - orr r0, r0, #0x00f00000 // Enable VPF access (V* instructions) > - mcr p15, 0, r0, c1, c0, 2 > - mov r0, #0x40000000 // Set EN bit in FPEXC > - mcr p10,#0x7,r0,c8,c0,#0 // msr FPEXC,r0 in ARM assembly > - > - > - // Set CPU vectors to start of DRAM > - LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base > - mcr p15, 0, r0, c12, c0, 0 > - isb // Sync changes to control registers > - > - // Fill vector table with branchs to current pc (jmp $) > - ldr r1, ShouldNeverGetHere > - movs r2, #0 > -FillVectors: > - str r1, [r0, r2] > - adds r2, r2, #4 > - cmp r2, #32 > - bne FillVectors > - > - /* before we call C code, lets setup the stack pointer in internal RAM */ > -stack_pointer_setup: > - > - // > - // Set stack based on PCD values. Need to do it this way to make C code work > - // when it runs from FLASH. > - // > - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2) /* stack base arg2 */ > - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3) /* stack size arg3 */ > - add r4, r2, r3 > - > - //Enter SVC mode and set up SVC stack pointer > - mov r0,#0x13|0x80|0x40 > - msr CPSR_c,r0 > - mov r13,r4 > - > - // Call C entry point > - LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1) /* memory size arg1 */ > - LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0) /* memory size arg0 */ > - blx ASM_PFX(CEntryPoint) /* Assume C code is thumb */ > - > -ShouldNeverGetHere: > - /* _CEntryPoint should never return */ > - b ShouldNeverGetHere > - > diff --git a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm b/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm > deleted file mode 100644 > index 63174d4b8437..000000000000 > --- a/BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm > +++ /dev/null > @@ -1,89 +0,0 @@ > -//------------------------------------------------------------------------------ > -// > -// Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > -// > -// This program and the accompanying materials > -// are licensed and made available under the terms and conditions of the BSD License > -// which accompanies this distribution. The full text of the license may be found at > -// http://opensource.org/licenses/bsd-license.php > -// > -// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -// > -//------------------------------------------------------------------------------ > - > -#include <AsmMacroIoLib.h> > -#include <Library/PcdLib.h> > -#include <AutoGen.h> > - INCLUDE AsmMacroIoLib.inc > - > - IMPORT CEntryPoint > - EXPORT _ModuleEntryPoint > - > - PRESERVE8 > - AREA ModuleEntryPoint, CODE, READONLY > - > - > -_ModuleEntryPoint > - > - //Disable L2 cache > - mrc p15, 0, r0, c1, c0, 1 // read Auxiliary Control Register > - bic r0, r0, #0x00000002 // disable L2 cache > - mcr p15, 0, r0, c1, c0, 1 // store Auxiliary Control Register > - > - //Enable Strict alignment checking & Instruction cache > - mrc p15, 0, r0, c1, c0, 0 > - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ > - bic r0, r0, #0x00000005 /* clear bits 0, 2 (---- -C-M) */ > - orr r0, r0, #0x00000002 /* set bit 1 (A) Align */ > - orr r0, r0, #0x00001000 /* set bit 12 (I) enable I-Cache */ > - mcr p15, 0, r0, c1, c0, 0 > - > - // Enable NEON register in case folks want to use them for optimizations (CopyMem) > - mrc p15, 0, r0, c1, c0, 2 > - orr r0, r0, #0x00f00000 // Enable VPF access (V* instructions) > - mcr p15, 0, r0, c1, c0, 2 > - mov r0, #0x40000000 // Set EN bit in FPEXC > - msr FPEXC,r0 > - > - // Set CPU vectors to start of DRAM > - LoadConstantToReg (FixedPcdGet32(PcdCpuVectorBaseAddress) ,r0) // Get vector base > - mcr p15, 0, r0, c12, c0, 0 > - isb // Sync changes to control registers > - > - // Fill vector table with branchs to current pc (jmp $) > - ldr r1, ShouldNeverGetHere > - movs r2, #0 > -FillVectors > - str r1, [r0, r2] > - adds r2, r2, #4 > - cmp r2, #32 > - bne FillVectors > - > - /* before we call C code, lets setup the stack pointer in internal RAM */ > -stack_pointer_setup > - > - // > - // Set stack based on PCD values. Need to do it this way to make C code work > - // when it runs from FLASH. > - // > - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackBase) ,r2) // stack base arg2 > - LoadConstantToReg (FixedPcdGet32(PcdPrePiStackSize) ,r3) // stack size arg3 > - add r4, r2, r3 > - > - //Enter SVC mode and set up SVC stack pointer > - mov r5,#0x13|0x80|0x40 > - msr CPSR_c,r5 > - mov r13,r4 > - > - // Call C entry point > - LoadConstantToReg (FixedPcdGet32(PcdMemorySize) ,r1) // memory size arg1 > - LoadConstantToReg (FixedPcdGet32(PcdMemoryBase) ,r0) // memory start arg0 > - blx CEntryPoint // Assume C code is thumb > - > -ShouldNeverGetHere > - /* _CEntryPoint should never return */ > - b ShouldNeverGetHere > - > - END > - > diff --git a/BeagleBoardPkg/Sec/Cache.c b/BeagleBoardPkg/Sec/Cache.c > deleted file mode 100644 > index 7399eef5be7c..000000000000 > --- a/BeagleBoardPkg/Sec/Cache.c > +++ /dev/null > @@ -1,79 +0,0 @@ > -/** @file > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <PiPei.h> > - > -#include <Library/ArmLib.h> > -#include <Library/PrePiLib.h> > -#include <Library/PcdLib.h> > - > -// DDR attributes > -#define DDR_ATTRIBUTES_CACHED ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK > -#define DDR_ATTRIBUTES_UNCACHED ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED > - > -// SoC registers. L3 interconnects > -#define SOC_REGISTERS_L3_PHYSICAL_BASE 0x68000000 > -#define SOC_REGISTERS_L3_PHYSICAL_LENGTH 0x08000000 > -#define SOC_REGISTERS_L3_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE > - > -// SoC registers. L4 interconnects > -#define SOC_REGISTERS_L4_PHYSICAL_BASE 0x48000000 > -#define SOC_REGISTERS_L4_PHYSICAL_LENGTH 0x08000000 > -#define SOC_REGISTERS_L4_ATTRIBUTES ARM_MEMORY_REGION_ATTRIBUTE_DEVICE > - > -VOID > -InitCache ( > - IN UINT32 MemoryBase, > - IN UINT32 MemoryLength > - ) > -{ > - UINT32 CacheAttributes; > - ARM_MEMORY_REGION_DESCRIPTOR MemoryTable[5]; > - VOID *TranslationTableBase; > - UINTN TranslationTableSize; > - > - if (FeaturePcdGet(PcdCacheEnable) == TRUE) { > - CacheAttributes = DDR_ATTRIBUTES_CACHED; > - } else { > - CacheAttributes = DDR_ATTRIBUTES_UNCACHED; > - } > - > - // DDR > - MemoryTable[0].PhysicalBase = MemoryBase; > - MemoryTable[0].VirtualBase = MemoryBase; > - MemoryTable[0].Length = MemoryLength; > - MemoryTable[0].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)CacheAttributes; > - > - // SOC Registers. L3 interconnects > - MemoryTable[1].PhysicalBase = SOC_REGISTERS_L3_PHYSICAL_BASE; > - MemoryTable[1].VirtualBase = SOC_REGISTERS_L3_PHYSICAL_BASE; > - MemoryTable[1].Length = SOC_REGISTERS_L3_PHYSICAL_LENGTH; > - MemoryTable[1].Attributes = SOC_REGISTERS_L3_ATTRIBUTES; > - > - // SOC Registers. L4 interconnects > - MemoryTable[2].PhysicalBase = SOC_REGISTERS_L4_PHYSICAL_BASE; > - MemoryTable[2].VirtualBase = SOC_REGISTERS_L4_PHYSICAL_BASE; > - MemoryTable[2].Length = SOC_REGISTERS_L4_PHYSICAL_LENGTH; > - MemoryTable[2].Attributes = SOC_REGISTERS_L4_ATTRIBUTES; > - > - // End of Table > - MemoryTable[3].PhysicalBase = 0; > - MemoryTable[3].VirtualBase = 0; > - MemoryTable[3].Length = 0; > - MemoryTable[3].Attributes = (ARM_MEMORY_REGION_ATTRIBUTES)0; > - > - ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize); > - > - BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData); > -} > diff --git a/BeagleBoardPkg/Sec/Clock.c b/BeagleBoardPkg/Sec/Clock.c > deleted file mode 100644 > index 24fdc71c420f..000000000000 > --- a/BeagleBoardPkg/Sec/Clock.c > +++ /dev/null > @@ -1,70 +0,0 @@ > -/** @file > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <Library/IoLib.h> > -#include <Library/DebugLib.h> > - > -#include <Omap3530/Omap3530.h> > - > -VOID > -ClockInit ( > - VOID > - ) > -{ > - //DPLL1 - DPLL4 are configured part of Configuration header which OMAP3 ROM parses. > - > - // Enable PLL5 and set to 120 MHz as a reference clock. > - MmioWrite32 (CM_CLKSEL4_PLL, CM_CLKSEL_PLL_MULT(120) | CM_CLKSEL_PLL_DIV(13)); > - MmioWrite32 (CM_CLKSEL5_PLL, CM_CLKSEL_DIV_120M(1)); > - MmioWrite32 (CM_CLKEN2_PLL, CM_CLKEN_FREQSEL_075_100 | CM_CLKEN_ENABLE); > - > - // Turn on functional & interface clocks to the USBHOST power domain > - MmioOr32(CM_FCLKEN_USBHOST, CM_FCLKEN_USBHOST_EN_USBHOST2_ENABLE > - | CM_FCLKEN_USBHOST_EN_USBHOST1_ENABLE); > - MmioOr32(CM_ICLKEN_USBHOST, CM_ICLKEN_USBHOST_EN_USBHOST_ENABLE); > - > - // Turn on functional & interface clocks to the USBTLL block. > - MmioOr32(CM_FCLKEN3_CORE, CM_FCLKEN3_CORE_EN_USBTLL_ENABLE); > - MmioOr32(CM_ICLKEN3_CORE, CM_ICLKEN3_CORE_EN_USBTLL_ENABLE); > - > - // Turn on functional & interface clocks to MMC1 and I2C1 modules. > - MmioOr32(CM_FCLKEN1_CORE, CM_FCLKEN1_CORE_EN_MMC1_ENABLE > - | CM_FCLKEN1_CORE_EN_I2C1_ENABLE); > - MmioOr32(CM_ICLKEN1_CORE, CM_ICLKEN1_CORE_EN_MMC1_ENABLE > - | CM_ICLKEN1_CORE_EN_I2C1_ENABLE); > - > - // Turn on functional & interface clocks to various Peripherals. > - MmioOr32(CM_FCLKEN_PER, CM_FCLKEN_PER_EN_UART3_ENABLE > - | CM_FCLKEN_PER_EN_GPT3_ENABLE > - | CM_FCLKEN_PER_EN_GPT4_ENABLE > - | CM_FCLKEN_PER_EN_GPIO2_ENABLE > - | CM_FCLKEN_PER_EN_GPIO3_ENABLE > - | CM_FCLKEN_PER_EN_GPIO4_ENABLE > - | CM_FCLKEN_PER_EN_GPIO5_ENABLE > - | CM_FCLKEN_PER_EN_GPIO6_ENABLE); > - MmioOr32(CM_ICLKEN_PER, CM_ICLKEN_PER_EN_UART3_ENABLE > - | CM_ICLKEN_PER_EN_GPT3_ENABLE > - | CM_ICLKEN_PER_EN_GPT4_ENABLE > - | CM_ICLKEN_PER_EN_GPIO2_ENABLE > - | CM_ICLKEN_PER_EN_GPIO3_ENABLE > - | CM_ICLKEN_PER_EN_GPIO4_ENABLE > - | CM_ICLKEN_PER_EN_GPIO5_ENABLE > - | CM_ICLKEN_PER_EN_GPIO6_ENABLE); > - > - // Turn on functional & inteface clocks to various wakeup modules. > - MmioOr32(CM_FCLKEN_WKUP, CM_FCLKEN_WKUP_EN_GPIO1_ENABLE > - | CM_FCLKEN_WKUP_EN_WDT2_ENABLE); > - MmioOr32(CM_ICLKEN_WKUP, CM_ICLKEN_WKUP_EN_GPIO1_ENABLE > - | CM_ICLKEN_WKUP_EN_WDT2_ENABLE); > -} > diff --git a/BeagleBoardPkg/Sec/LzmaDecompress.h b/BeagleBoardPkg/Sec/LzmaDecompress.h > deleted file mode 100644 > index a79ff343d231..000000000000 > --- a/BeagleBoardPkg/Sec/LzmaDecompress.h > +++ /dev/null > @@ -1,103 +0,0 @@ > -/** @file > - LZMA Decompress Library header file > - > - Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#ifndef __LZMA_DECOMPRESS_H___ > -#define __LZMA_DECOMPRESS_H___ > - > -/** > - Examines a GUIDed section and returns the size of the decoded buffer and the > - size of an scratch buffer required to actually decode the data in a GUIDed section. > - > - Examines a GUIDed section specified by InputSection. > - If GUID for InputSection does not match the GUID that this handler supports, > - then RETURN_UNSUPPORTED is returned. > - If the required information can not be retrieved from InputSection, > - then RETURN_INVALID_PARAMETER is returned. > - If the GUID of InputSection does match the GUID that this handler supports, > - then the size required to hold the decoded buffer is returned in OututBufferSize, > - the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field > - from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute. > - > - If InputSection is NULL, then ASSERT(). > - If OutputBufferSize is NULL, then ASSERT(). > - If ScratchBufferSize is NULL, then ASSERT(). > - If SectionAttribute is NULL, then ASSERT(). > - > - > - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. > - @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required > - if the buffer specified by InputSection were decoded. > - @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space > - if the buffer specified by InputSection were decoded. > - @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes > - field of EFI_GUID_DEFINED_SECTION in the PI Specification. > - > - @retval RETURN_SUCCESS The information about InputSection was returned. > - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. > - @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection. > - > -**/ > -RETURN_STATUS > -EFIAPI > -LzmaGuidedSectionGetInfo ( > - IN CONST VOID *InputSection, > - OUT UINT32 *OutputBufferSize, > - OUT UINT32 *ScratchBufferSize, > - OUT UINT16 *SectionAttribute > - ); > - > -/** > - Decompress a LZAM compressed GUIDed section into a caller allocated output buffer. > - > - Decodes the GUIDed section specified by InputSection. > - If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned. > - If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned. > - If the GUID of InputSection does match the GUID that this handler supports, then InputSection > - is decoded into the buffer specified by OutputBuffer and the authentication status of this > - decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the > - data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise, > - the decoded data will be placed in caller allocated buffer specified by OutputBuffer. > - > - If InputSection is NULL, then ASSERT(). > - If OutputBuffer is NULL, then ASSERT(). > - If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT(). > - If AuthenticationStatus is NULL, then ASSERT(). > - > - > - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. > - @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation. > - @param[out] ScratchBuffer A caller allocated buffer that may be required by this function > - as a scratch buffer to perform the decode operation. > - @param[out] AuthenticationStatus > - A pointer to the authentication status of the decoded output buffer. > - See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI > - section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must > - never be set by this handler. > - > - @retval RETURN_SUCCESS The buffer specified by InputSection was decoded. > - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. > - @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded. > - > -**/ > -RETURN_STATUS > -EFIAPI > -LzmaGuidedSectionExtraction ( > - IN CONST VOID *InputSection, > - OUT VOID **OutputBuffer, > - OUT VOID *ScratchBuffer, OPTIONAL > - OUT UINT32 *AuthenticationStatus > - ); > - > -#endif // __LZMADECOMPRESS_H__ > - > diff --git a/BeagleBoardPkg/Sec/PadConfiguration.c b/BeagleBoardPkg/Sec/PadConfiguration.c > deleted file mode 100644 > index 2dace3bf38b4..000000000000 > --- a/BeagleBoardPkg/Sec/PadConfiguration.c > +++ /dev/null > @@ -1,282 +0,0 @@ > -/** @file > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <PiPei.h> > -#include <Library/IoLib.h> > -#include <Library/DebugLib.h> > -#include <Omap3530/Omap3530.h> > - > -#define NUM_PINS 238 > - > -PAD_CONFIGURATION PadConfigurationTable[NUM_PINS] = { > - //Pin, MuxMode, PullConfig, InputEnable > - { SDRC_D0, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D1, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D2, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D3, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D4, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D5, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D6, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D7, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D8, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D9, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D10, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D11, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D12, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D13, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D14, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D15, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D16, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D17, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D18, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D19, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D20, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D21, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D22, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D23, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D24, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D25, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D26, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D27, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D28, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D29, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D30, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_D31, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_CLK, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_DQS0, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_CKE0, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { SDRC_CKE1, MUXMODE7, PULL_DISABLED, INPUT }, > - { SDRC_DQS1, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_DQS2, MUXMODE0, PULL_DISABLED, INPUT }, > - { SDRC_DQS3, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_A1, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A2, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A3, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A4, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A5, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A6, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A7, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A8, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A9, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_A10, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_D0, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D1, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D2, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D3, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D4, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D5, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D6, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D7, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D8, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D9, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D10, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D11, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D12, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D13, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D14, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_D15, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NCS0, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NCS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { GPMC_NCS2, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { GPMC_NCS3, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { GPMC_NCS4, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { GPMC_NCS5, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_NCS6, MUXMODE1, PULL_DISABLED, INPUT }, > - { GPMC_NCS7, MUXMODE1, PULL_UP_SELECTED, INPUT }, > - { GPMC_CLK, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_NADV_ALE, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NOE, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NWE, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NBE0_CLE, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { GPMC_NBE1, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_NWP, MUXMODE0, PULL_DISABLED, INPUT }, > - { GPMC_WAIT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { GPMC_WAIT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { GPMC_WAIT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { GPMC_WAIT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { DSS_PCLK, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_HSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_PSYNC, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_ACBIAS, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA0, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA1, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA2, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA3, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA4, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA5, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA6, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA7, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA8, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA9, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA10, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA11, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA12, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA13, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA14, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA15, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA16, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA17, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA18, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA19, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA20, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA21, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA22, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { DSS_DATA23, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { CAM_HS, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { CAM_VS, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { CAM_XCLKA, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { CAM_PCLK, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { CAM_FLD, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { CAM_D0, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D1, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D2, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D3, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D4, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D5, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D6, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D7, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D8, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D9, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D10, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_D11, MUXMODE0, PULL_DISABLED, INPUT }, > - { CAM_XCLKB, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { CAM_WEN, MUXMODE4, PULL_DISABLED, INPUT }, > - { CAM_STROBE, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { CSI2_DX0, MUXMODE0, PULL_DISABLED, INPUT }, > - { CSI2_DY0, MUXMODE0, PULL_DISABLED, INPUT }, > - { CSI2_DX1, MUXMODE0, PULL_DISABLED, INPUT }, > - { CSI2_DY1, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCBSP2_FSX, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCBSP2_CLKX, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCBSP2_DR, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCBSP2_DX, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { MMC1_CLK, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { MMC1_CMD, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT0, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT1, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT2, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT3, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT4, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT5, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT6, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC1_DAT7, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MMC2_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_CMD, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT0, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT1, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT3, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT4, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT5, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT6, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MMC2_DAT7, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MCBSP3_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP3_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP3_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP3_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { UART2_CTS, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { UART2_RTS, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { UART2_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { UART2_RX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { UART1_TX, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { UART1_RTS, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { UART1_CTS, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { UART1_RX, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCBSP4_CLKX, MUXMODE1, PULL_DISABLED, INPUT }, > - { MCBSP4_DR, MUXMODE1, PULL_DISABLED, INPUT }, > - { MCBSP4_DX, MUXMODE1, PULL_DISABLED, INPUT }, > - { MCBSP4_FSX, MUXMODE1, PULL_DISABLED, INPUT }, > - { MCBSP1_CLKR, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP1_FSR, MUXMODE4, PULL_UP_SELECTED, OUTPUT }, > - { MCBSP1_DX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP1_DR, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP1_CLKS, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MCBSP1_FSX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCBSP1_CLKX, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { UART3_CTS_RCTX,MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { UART3_RTS_SD, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { UART3_RX_IRRX, MUXMODE0, PULL_DISABLED, INPUT }, > - { UART3_TX_IRTX, MUXMODE0, PULL_DISABLED, OUTPUT }, > - { HSUSB0_CLK, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_STP, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { HSUSB0_DIR, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_NXT, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA0, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA1, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA2, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA3, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA4, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA5, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA6, MUXMODE0, PULL_DISABLED, INPUT }, > - { HSUSB0_DATA7, MUXMODE0, PULL_DISABLED, INPUT }, > - { I2C1_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { I2C1_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { I2C2_SCL, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { I2C2_SDA, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { I2C3_SCL, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { I2C3_SDA, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { HDQ_SIO, MUXMODE4, PULL_UP_SELECTED, OUTPUT }, > - { MCSPI1_CLK, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MCSPI1_SIMO, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { MCSPI1_SOMI, MUXMODE0, PULL_DISABLED, INPUT }, > - { MCSPI1_CS0, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { MCSPI1_CS1, MUXMODE0, PULL_UP_SELECTED, OUTPUT }, > - { MCSPI1_CS2, MUXMODE4, PULL_DISABLED, OUTPUT }, > - { MCSPI1_CS3, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { MCSPI2_CLK, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { MCSPI2_SIMO, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { MCSPI2_SOMI, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { MCSPI2_CS0, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { MCSPI2_CS1, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { SYS_NIRQ, MUXMODE0, PULL_UP_SELECTED, INPUT }, > - { SYS_CLKOUT2, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { ETK_CLK, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, > - { ETK_CTL, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, > - { ETK_D0, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D1, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D2, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D3, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D4, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D5, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D6, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D7, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D8, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D9, MUXMODE4, PULL_UP_SELECTED, INPUT }, > - { ETK_D10, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, > - { ETK_D11, MUXMODE3, PULL_UP_SELECTED, OUTPUT }, > - { ETK_D12, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D13, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D14, MUXMODE3, PULL_UP_SELECTED, INPUT }, > - { ETK_D15, MUXMODE3, PULL_UP_SELECTED, INPUT } > -}; > - > -VOID > -PadConfiguration ( > - VOID > - ) > -{ > - UINTN Index; > - UINT16 PadConfiguration; > - UINTN NumPinsToConfigure = sizeof(PadConfigurationTable)/sizeof(PAD_CONFIGURATION); > - > - for (Index = 0; Index < NumPinsToConfigure; Index++) { > - //Set up Pad configuration for particular pin. > - PadConfiguration = (PadConfigurationTable[Index].MuxMode << MUXMODE_OFFSET); > - PadConfiguration |= (PadConfigurationTable[Index].PullConfig << PULL_CONFIG_OFFSET); > - PadConfiguration |= (PadConfigurationTable[Index].InputEnable << INPUTENABLE_OFFSET); > - > - //Configure the pin with specific Pad configuration. > - MmioWrite16(PadConfigurationTable[Index].Pin, PadConfiguration); > - } > -} > diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c > deleted file mode 100644 > index 0708396d9792..000000000000 > --- a/BeagleBoardPkg/Sec/Sec.c > +++ /dev/null > @@ -1,186 +0,0 @@ > -/** @file > - C Entry point for the SEC. First C code after the reset vector. > - > - Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR> > - > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#include <PiPei.h> > - > -#include <Library/DebugLib.h> > -#include <Library/PrePiLib.h> > -#include <Library/PcdLib.h> > -#include <Library/IoLib.h> > -#include <Library/OmapLib.h> > -#include <Library/ArmLib.h> > -#include <Library/PeCoffGetEntryPointLib.h> > -#include <Library/DebugAgentLib.h> > - > -#include <Ppi/GuidedSectionExtraction.h> > -#include <Guid/LzmaDecompress.h> > -#include <Omap3530/Omap3530.h> > - > -#include "LzmaDecompress.h" > - > -VOID > -PadConfiguration ( > - VOID > - ); > - > -VOID > -ClockInit ( > - VOID > - ); > - > - > -VOID > -TimerInit ( > - VOID > - ) > -{ > - UINTN Timer = FixedPcdGet32(PcdOmap35xxFreeTimer); > - UINT32 TimerBaseAddress = TimerBase(Timer); > - > - // Set source clock for GPT3 & GPT4 to SYS_CLK > - MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS); > - > - // Set count & reload registers > - MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000); > - MmioWrite32 (TimerBaseAddress + GPTIMER_TLDR, 0x00000000); > - > - // Disable interrupts > - MmioWrite32 (TimerBaseAddress + GPTIMER_TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_DISABLE | TIER_MAT_IT_DISABLE); > - > - // Start Timer > - MmioWrite32 (TimerBaseAddress + GPTIMER_TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON); > - > - //Disable OMAP Watchdog timer (WDT2) > - MmioWrite32 (WDTIMER2_BASE + WSPR, 0xAAAA); > - DEBUG ((EFI_D_ERROR, "Magic delay to disable watchdog timers properly.\n")); > - MmioWrite32 (WDTIMER2_BASE + WSPR, 0x5555); > -} > - > -VOID > -UartInit ( > - VOID > - ) > -{ > - UINTN Uart = FixedPcdGet32(PcdOmap35xxConsoleUart); > - UINT32 UartBaseAddress = UartBase(Uart); > - > - // Set MODE_SELECT=DISABLE before trying to initialize or modify DLL, DLH registers. > - MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_DISABLE); > - > - // Put device in configuration mode. > - MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_ENABLE); > - > - // Programmable divisor N = 48Mhz/16/115200 = 26 > - MmioWrite32 (UartBaseAddress + UART_DLL_REG, 3000000/FixedPcdGet64 (PcdUartDefaultBaudRate)); // low divisor > - MmioWrite32 (UartBaseAddress + UART_DLH_REG, 0); // high divisor > - > - // Enter into UART operational mode. > - MmioWrite32 (UartBaseAddress + UART_LCR_REG, UART_LCR_DIV_EN_DISABLE | UART_LCR_CHAR_LENGTH_8); > - > - // Force DTR and RTS output to active > - MmioWrite32 (UartBaseAddress + UART_MCR_REG, UART_MCR_RTS_FORCE_ACTIVE | UART_MCR_DTR_FORCE_ACTIVE); > - > - // Clear & enable fifos > - MmioWrite32 (UartBaseAddress + UART_FCR_REG, UART_FCR_TX_FIFO_CLEAR | UART_FCR_RX_FIFO_CLEAR | UART_FCR_FIFO_ENABLE); > - > - // Restore MODE_SELECT > - MmioWrite32 (UartBaseAddress + UART_MDR1_REG, UART_MDR1_MODE_SELECT_UART_16X); > -} > - > -VOID > -InitCache ( > - IN UINT32 MemoryBase, > - IN UINT32 MemoryLength > - ); > - > -EFI_STATUS > -EFIAPI > -ExtractGuidedSectionLibConstructor ( > - VOID > - ); > - > -EFI_STATUS > -EFIAPI > -LzmaDecompressLibConstructor ( > - VOID > - ); > - > - > -VOID > -CEntryPoint ( > - IN VOID *MemoryBase, > - IN UINTN MemorySize, > - IN VOID *StackBase, > - IN UINTN StackSize > - ) > -{ > - VOID *HobBase; > - > - // Build a basic HOB list > - HobBase = (VOID *)(UINTN)(FixedPcdGet32(PcdEmbeddedFdBaseAddress) + FixedPcdGet32(PcdEmbeddedFdSize)); > - CreateHobList (MemoryBase, MemorySize, HobBase, StackBase); > - > - //Set up Pin muxing. > - PadConfiguration (); > - > - // Set up system clocking > - ClockInit (); > - > - > - // Enable program flow prediction, if supported. > - ArmEnableBranchPrediction (); > - > - // Initialize CPU cache > - InitCache ((UINT32)MemoryBase, (UINT32)MemorySize); > - > - // Add memory allocation hob for relocated FD > - BuildMemoryAllocationHob (FixedPcdGet32(PcdEmbeddedFdBaseAddress), FixedPcdGet32(PcdEmbeddedFdSize), EfiBootServicesData); > - > - // Add the FVs to the hob list > - BuildFvHob (PcdGet32(PcdFlashFvMainBase), PcdGet32(PcdFlashFvMainSize)); > - > - // Start talking > - UartInit (); > - > - InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL, NULL); > - SaveAndSetDebugTimerInterrupt (TRUE); > - > - DEBUG ((EFI_D_ERROR, "UART Enabled\n")); > - > - // Start up a free running timer so that the timer lib will work > - TimerInit (); > - > - // SEC phase needs to run library constructors by hand. > - ExtractGuidedSectionLibConstructor (); > - LzmaDecompressLibConstructor (); > - > - // Build HOBs to pass up our version of stuff the DXE Core needs to save space > - BuildPeCoffLoaderHob (); > - BuildExtractSectionHob ( > - &gLzmaCustomDecompressGuid, > - LzmaGuidedSectionGetInfo, > - LzmaGuidedSectionExtraction > - ); > - > - // Assume the FV that contains the SEC (our code) also contains a compressed FV. > - DecompressFirstFv (); > - > - // Load the DXE Core and transfer control to it > - LoadDxeCoreFromFv (NULL, 0); > - > - // DXE Core should always load and never return > - ASSERT (FALSE); > -} > - > diff --git a/BeagleBoardPkg/Sec/Sec.inf b/BeagleBoardPkg/Sec/Sec.inf > deleted file mode 100644 > index eb6d93c000bb..000000000000 > --- a/BeagleBoardPkg/Sec/Sec.inf > +++ /dev/null > @@ -1,73 +0,0 @@ > - > -#/** @file > -# SEC - Reset vector code that jumps to C and loads DXE core > -# > -# Copyright (c) 2008, Apple Inc. All rights reserved.<BR> > -# This program and the accompanying materials > -# are licensed and made available under the terms and conditions of the BSD License > -# which accompanies this distribution. The full text of the license may be found at > -# http://opensource.org/licenses/bsd-license.php > -# > -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > -# > -#**/ > - > -[Defines] > - INF_VERSION = 0x00010005 > - BASE_NAME = BeagleBoardSec > - FILE_GUID = d959e387-7b91-452c-90e0-a1dbac90ddb8 > - MODULE_TYPE = SEC > - VERSION_STRING = 1.0 > - > - > -[Sources.ARM] > - Arm/ModuleEntryPoint.S | GCC > - Arm/ModuleEntryPoint.asm | RVCT > - > -[Sources.ARM] > - Sec.c > - Cache.c > - PadConfiguration.c > - Clock.c > - > -[Packages] > - MdePkg/MdePkg.dec > - MdeModulePkg/MdeModulePkg.dec > - EmbeddedPkg/EmbeddedPkg.dec > - ArmPkg/ArmPkg.dec > - Omap35xxPkg/Omap35xxPkg.dec > - IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec > - > -[LibraryClasses] > - BaseLib > - DebugLib > - ArmLib > - IoLib > - ExtractGuidedSectionLib > - LzmaDecompressLib > - OmapLib > - PeCoffGetEntryPointLib > - DebugAgentLib > - MemoryAllocationLib > - PrePiHobListPointerLib > - > -[FeaturePcd] > - gEmbeddedTokenSpaceGuid.PcdCacheEnable > - > -[FixedPcd] > - gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate > - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress > - gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize > - gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase > - gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize > - gEmbeddedTokenSpaceGuid.PcdPrePiStackSize > - gEmbeddedTokenSpaceGuid.PcdPrePiStackBase > - gEmbeddedTokenSpaceGuid.PcdMemoryBase > - gEmbeddedTokenSpaceGuid.PcdMemorySize > - > - gOmap35xxTokenSpaceGuid.PcdOmap35xxConsoleUart > - gOmap35xxTokenSpaceGuid.PcdOmap35xxFreeTimer > - > - gArmTokenSpaceGuid.PcdCpuVectorBaseAddress > - > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/3] BeagleBoardPkg: move to generic BDS 2016-10-25 16:37 [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Ard Biesheuvel 2016-10-25 16:37 ` [PATCH 1/3] BeagleBoardPkg: remove unused modules Ard Biesheuvel @ 2016-10-25 16:37 ` Ard Biesheuvel 2016-10-25 17:41 ` Leif Lindholm 2016-10-25 16:37 ` [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES Ard Biesheuvel 2016-10-25 17:16 ` [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Laszlo Ersek 3 siblings, 1 reply; 8+ messages in thread From: Ard Biesheuvel @ 2016-10-25 16:37 UTC (permalink / raw) To: edk2-devel, leif.lindholm; +Cc: lersek, Ard Biesheuvel Drop the ARM BDS and related dependencies, and switch to the generic BDS instead. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- BeagleBoardPkg/BeagleBoardPkg.dsc | 60 +++++++++++++++++--- BeagleBoardPkg/BeagleBoardPkg.fdf | 7 ++- 2 files changed, 56 insertions(+), 11 deletions(-) diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc index 1e21ed1463a6..2951c689c753 100644 --- a/BeagleBoardPkg/BeagleBoardPkg.dsc +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc @@ -128,9 +128,17 @@ [LibraryClasses.common] DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf - BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf + UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf + PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf + CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf + + # UiApp dependencies + ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf + FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf + [LibraryClasses.common.SEC] PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf @@ -328,6 +336,7 @@ [PcdsFixedAtBuild.common] gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|10 gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0 + gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4 # # Beagle board Specific PCDs @@ -368,6 +377,14 @@ [PcdsFixedAtBuild.common] gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi();VenHw(E68088EF-D1A4-4336-C1DB-4D3A204730A6)" gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()" + # GUID of the UEFI Shell + gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 } + + # GUID of the UI app + gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 } + + gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE + ################################################################################ # # Components Section - list of all EDK II Modules needed by this Platform @@ -475,13 +492,38 @@ [Components.common] # MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf - ArmPlatformPkg/Bds/Bds.inf - - # Legacy Linux Loader - ArmPkg/Application/LinuxLoader/LinuxLoader.inf + MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf + MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf + MdeModulePkg/Universal/BdsDxe/BdsDxe.inf + MdeModulePkg/Application/UiApp/UiApp.inf { + <LibraryClasses> + NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf + NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf + NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf + } + ShellPkg/Application/Shell/Shell.inf { + <LibraryClasses> + ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf + NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf + NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf + NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf + NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf + HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf + BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf - # - # Example Application - # - MdeModulePkg/Application/HelloWorld/HelloWorld.inf + <PcdsFixedAtBuild> + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000 + } + # Legacy Linux Loader + ArmPkg/Application/LinuxLoader/LinuxLoader.inf { + <LibraryClasses> + BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf + } diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf index 733b5a43d318..fcaf44abb5cf 100644 --- a/BeagleBoardPkg/BeagleBoardPkg.fdf +++ b/BeagleBoardPkg/BeagleBoardPkg.fdf @@ -175,14 +175,17 @@ [FV.FvMain] # # UEFI application (Shell Embedded Boot Loader) # - INF ShellBinPkg/UefiShell/UefiShell.inf + INF ShellPkg/Application/Shell/Shell.inf # # Bds # INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf - INF ArmPlatformPkg/Bds/Bds.inf + INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf + INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf + INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf + INF MdeModulePkg/Application/UiApp/UiApp.inf # Legacy Linux Loader INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf -- 2.7.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/3] BeagleBoardPkg: move to generic BDS 2016-10-25 16:37 ` [PATCH 2/3] BeagleBoardPkg: move to generic BDS Ard Biesheuvel @ 2016-10-25 17:41 ` Leif Lindholm 0 siblings, 0 replies; 8+ messages in thread From: Leif Lindholm @ 2016-10-25 17:41 UTC (permalink / raw) To: Ard Biesheuvel; +Cc: edk2-devel, lersek On Tue, Oct 25, 2016 at 05:37:19PM +0100, Ard Biesheuvel wrote: > Drop the ARM BDS and related dependencies, and switch to the generic > BDS instead. > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > --- > BeagleBoardPkg/BeagleBoardPkg.dsc | 60 +++++++++++++++++--- > BeagleBoardPkg/BeagleBoardPkg.fdf | 7 ++- > 2 files changed, 56 insertions(+), 11 deletions(-) > > diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc > index 1e21ed1463a6..2951c689c753 100644 > --- a/BeagleBoardPkg/BeagleBoardPkg.dsc > +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc > @@ -128,9 +128,17 @@ [LibraryClasses.common] > DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf > > NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf > - BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf > FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf > > + UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf > + PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf > + CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf > + > + # UiApp dependencies > + ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf > + FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf > + DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf > + > [LibraryClasses.common.SEC] > PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf > ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf > @@ -328,6 +336,7 @@ [PcdsFixedAtBuild.common] > gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|10 > gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0 > > + gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4 > > # > # Beagle board Specific PCDs > @@ -368,6 +377,14 @@ [PcdsFixedAtBuild.common] > gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi();VenHw(E68088EF-D1A4-4336-C1DB-4D3A204730A6)" > gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()" > > + # GUID of the UEFI Shell > + gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 } > + > + # GUID of the UI app > + gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 } > + > + gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE > + > ################################################################################ > # > # Components Section - list of all EDK II Modules needed by this Platform > @@ -475,13 +492,38 @@ [Components.common] > # > MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf > MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf > - ArmPlatformPkg/Bds/Bds.inf > - > - # Legacy Linux Loader > - ArmPkg/Application/LinuxLoader/LinuxLoader.inf > + MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf > + MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf > + MdeModulePkg/Universal/BdsDxe/BdsDxe.inf > + MdeModulePkg/Application/UiApp/UiApp.inf { > + <LibraryClasses> > + NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf > + NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf > + NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf > + } > + ShellPkg/Application/Shell/Shell.inf { > + <LibraryClasses> > + ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf > + NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf > + NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf > + HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf > + PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf > + BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf > > - # > - # Example Application > - # > - MdeModulePkg/Application/HelloWorld/HelloWorld.inf > + <PcdsFixedAtBuild> > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF > + gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE > + gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000 > + } > > + # Legacy Linux Loader > + ArmPkg/Application/LinuxLoader/LinuxLoader.inf { > + <LibraryClasses> > + BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf > + } > diff --git a/BeagleBoardPkg/BeagleBoardPkg.fdf b/BeagleBoardPkg/BeagleBoardPkg.fdf > index 733b5a43d318..fcaf44abb5cf 100644 > --- a/BeagleBoardPkg/BeagleBoardPkg.fdf > +++ b/BeagleBoardPkg/BeagleBoardPkg.fdf > @@ -175,14 +175,17 @@ [FV.FvMain] > # > # UEFI application (Shell Embedded Boot Loader) > # > - INF ShellBinPkg/UefiShell/UefiShell.inf > + INF ShellPkg/Application/Shell/Shell.inf > > # > # Bds > # > INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf > INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf > - INF ArmPlatformPkg/Bds/Bds.inf > + INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf > + INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf > + INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf > + INF MdeModulePkg/Application/UiApp/UiApp.inf > > # Legacy Linux Loader > INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES 2016-10-25 16:37 [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Ard Biesheuvel 2016-10-25 16:37 ` [PATCH 1/3] BeagleBoardPkg: remove unused modules Ard Biesheuvel 2016-10-25 16:37 ` [PATCH 2/3] BeagleBoardPkg: move to generic BDS Ard Biesheuvel @ 2016-10-25 16:37 ` Ard Biesheuvel 2016-10-25 17:42 ` Leif Lindholm 2016-10-25 17:16 ` [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Laszlo Ersek 3 siblings, 1 reply; 8+ messages in thread From: Ard Biesheuvel @ 2016-10-25 16:37 UTC (permalink / raw) To: edk2-devel, leif.lindholm; +Cc: lersek, Ard Biesheuvel Define DISABLE_NEW_DEPRECATED_INTERFACES on the compiler command line by default, to prevent deprecated interfaces from being used in core EDK2 code. Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=164 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- BeagleBoardPkg/BeagleBoardPkg.dsc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc index 2951c689c753..1e2ecdc21ad9 100644 --- a/BeagleBoardPkg/BeagleBoardPkg.dsc +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc @@ -220,11 +220,11 @@ [LibraryClasses.ARM] [BuildOptions] XCODE:*_*_ARM_PLATFORM_FLAGS == -arch armv7 - GCC:*_*_ARM_PLATFORM_FLAGS == -march=armv7-a - RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A8 + *_*_*_CC_FLAGS = -DDISABLE_NEW_DEPRECATED_INTERFACES + ################################################################################ # # Pcd Section - list of all EDK II PCD Entries defined by this Platform -- 2.7.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES 2016-10-25 16:37 ` [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES Ard Biesheuvel @ 2016-10-25 17:42 ` Leif Lindholm 0 siblings, 0 replies; 8+ messages in thread From: Leif Lindholm @ 2016-10-25 17:42 UTC (permalink / raw) To: Ard Biesheuvel; +Cc: edk2-devel, lersek On Tue, Oct 25, 2016 at 05:37:20PM +0100, Ard Biesheuvel wrote: > Define DISABLE_NEW_DEPRECATED_INTERFACES on the compiler command line by > default, to prevent deprecated interfaces from being used in core EDK2 > code. > > Bug: https://bugzilla.tianocore.org/show_bug.cgi?id=164 > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > --- > BeagleBoardPkg/BeagleBoardPkg.dsc | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/BeagleBoardPkg/BeagleBoardPkg.dsc b/BeagleBoardPkg/BeagleBoardPkg.dsc > index 2951c689c753..1e2ecdc21ad9 100644 > --- a/BeagleBoardPkg/BeagleBoardPkg.dsc > +++ b/BeagleBoardPkg/BeagleBoardPkg.dsc > @@ -220,11 +220,11 @@ [LibraryClasses.ARM] > > [BuildOptions] > XCODE:*_*_ARM_PLATFORM_FLAGS == -arch armv7 > - > GCC:*_*_ARM_PLATFORM_FLAGS == -march=armv7-a > - > RVCT:*_*_ARM_PLATFORM_FLAGS == --cpu Cortex-A8 > > + *_*_*_CC_FLAGS = -DDISABLE_NEW_DEPRECATED_INTERFACES > + > ################################################################################ > # > # Pcd Section - list of all EDK II PCD Entries defined by this Platform > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions 2016-10-25 16:37 [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Ard Biesheuvel ` (2 preceding siblings ...) 2016-10-25 16:37 ` [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES Ard Biesheuvel @ 2016-10-25 17:16 ` Laszlo Ersek 3 siblings, 0 replies; 8+ messages in thread From: Laszlo Ersek @ 2016-10-25 17:16 UTC (permalink / raw) To: Ard Biesheuvel, edk2-devel, leif.lindholm On 10/25/16 18:37, Ard Biesheuvel wrote: > Get rid of unused modules and switch to the generic BDS, so we are only > left with code that does not use any deprecated functionality, allowing > us to define DISABLE_NEW_DEPRECATED_INTERFACES > > Ard Biesheuvel (3): > BeagleBoardPkg: remove unused modules > BeagleBoardPkg: move to generic BDS > BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES > > BeagleBoardPkg/Bds/Bds.inf | 65 ----- > BeagleBoardPkg/Bds/BdsEntry.c | 242 ---------------- > BeagleBoardPkg/Bds/BdsEntry.h | 66 ----- > BeagleBoardPkg/Bds/FirmwareVolume.c | 150 ---------- > BeagleBoardPkg/BeagleBoardPkg.dsc | 64 ++++- > BeagleBoardPkg/BeagleBoardPkg.fdf | 7 +- > BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c | 299 -------------------- > BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf | 53 ---- > BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c | 103 ------- > BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf | 41 --- > BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S | 85 ------ > BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm | 89 ------ > BeagleBoardPkg/Sec/Cache.c | 79 ------ > BeagleBoardPkg/Sec/Clock.c | 70 ----- > BeagleBoardPkg/Sec/LzmaDecompress.h | 103 ------- > BeagleBoardPkg/Sec/PadConfiguration.c | 282 ------------------ > BeagleBoardPkg/Sec/Sec.c | 186 ------------ > BeagleBoardPkg/Sec/Sec.inf | 73 ----- > 18 files changed, 58 insertions(+), 1999 deletions(-) > delete mode 100644 BeagleBoardPkg/Bds/Bds.inf > delete mode 100644 BeagleBoardPkg/Bds/BdsEntry.c > delete mode 100644 BeagleBoardPkg/Bds/BdsEntry.h > delete mode 100644 BeagleBoardPkg/Bds/FirmwareVolume.c > delete mode 100644 BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.c > delete mode 100644 BeagleBoardPkg/Library/EblCmdLib/EblCmdLib.inf > delete mode 100644 BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.c > delete mode 100644 BeagleBoardPkg/Library/GdbSerialLib/GdbSerialLib.inf > delete mode 100644 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.S > delete mode 100644 BeagleBoardPkg/Sec/Arm/ModuleEntryPoint.asm > delete mode 100644 BeagleBoardPkg/Sec/Cache.c > delete mode 100644 BeagleBoardPkg/Sec/Clock.c > delete mode 100644 BeagleBoardPkg/Sec/LzmaDecompress.h > delete mode 100644 BeagleBoardPkg/Sec/PadConfiguration.c > delete mode 100644 BeagleBoardPkg/Sec/Sec.c > delete mode 100644 BeagleBoardPkg/Sec/Sec.inf > I think I'll leave this to Leif -- I'm happy to review C code changes related to DISABLE_NEW_DEPRECATED_INTERFACES, but this series solves that question for BeagleBoardPkg by deleting a bunch of modules, and by moving over to some others. :) Thanks Laszlo ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-10-25 17:42 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-10-25 16:37 [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Ard Biesheuvel 2016-10-25 16:37 ` [PATCH 1/3] BeagleBoardPkg: remove unused modules Ard Biesheuvel 2016-10-25 17:40 ` Leif Lindholm 2016-10-25 16:37 ` [PATCH 2/3] BeagleBoardPkg: move to generic BDS Ard Biesheuvel 2016-10-25 17:41 ` Leif Lindholm 2016-10-25 16:37 ` [PATCH 3/3] BeagleBoardPkg: enable -DDISABLE_NEW_DEPRECATED_INTERFACES Ard Biesheuvel 2016-10-25 17:42 ` Leif Lindholm 2016-10-25 17:16 ` [PATCH 0/3] BeagleBoardPkg: eliminate calls to deprecated functions Laszlo Ersek
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox