From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from loongson.cn (loongson.cn [114.242.206.163]) by mx.groups.io with SMTP id smtpd.web10.6221.1668652803351892451 for ; Wed, 16 Nov 2022 18:40:03 -0800 Authentication-Results: mx.groups.io; dkim=missing; spf=pass (domain: loongson.cn, ip: 114.242.206.163, mailfrom: lixianglai@loongson.cn) Received: from loongson.cn (unknown [10.2.5.185]) by gateway (Coremail) with SMTP id _____8DxOdgCn3VjGyQIAA--.21614S3; Thu, 17 Nov 2022 10:40:02 +0800 (CST) Received: from localhost.localdomain (unknown [10.2.5.185]) by localhost.localdomain (Coremail) with SMTP id AQAAf8DxLeD5nnVjCpcVAA--.56818S11; Thu, 17 Nov 2022 10:40:01 +0800 (CST) From: "xianglai" To: devel@edk2.groups.io Cc: Ard Biesheuvel , Bibo Mao , Chao Li , Leif Lindholm , Liming Gao , Michael D Kinney Subject: [edk2-platforms][PATCH V6 09/16] Platform/Loongson: Add PciCpuIoDxe driver. Date: Thu, 17 Nov 2022 10:39:35 +0800 Message-Id: <69b201a624f57a493e2b33050962d6bd44b20f69.1668652102.git.lixianglai@loongson.cn> X-Mailer: git-send-email 2.31.1 In-Reply-To: References: MIME-Version: 1.0 X-CM-TRANSID: AQAAf8DxLeD5nnVjCpcVAA--.56818S11 X-CM-SenderInfo: 5ol0xt5qjotxo6or00hjvr0hdfq/ X-Coremail-Antispam: 1Uk129KBjvAXoWfXrW3tF13CrW8Cw13AFyftFb_yoW5Zry7Co W093yIvws8Jw1rGrZ5C3sYya17XFnrWFsaqF4rAF1UWa1qqrn8Ka4rX3WUG34rt3yDuayD Ja4UX3yxJrsYqa4fn29KB7ZKAUJUUUUU529EdanIXcx71UUUUU7KY7ZEXasCq-sGcSsGvf J3Ic02F40EFcxC0VAKzVAqx4xG6I80ebIjqfuFe4nvWSU5nxnvy29KBjDU0xBIdaVrnRJU UUqm1xkIjI8I6I8E6xAIw20EY4v20xvaj40_Wr0E3s1l8cAvFVAK0II2c7xJM28CjxkF64 kEwVA0rcxSw2x7M28EF7xvwVC0I7IYx2IY67AKxVW7JVWDJwA2z4x0Y4vE2Ix0cI8IcVCY 1x0267AKxVWxJVW8Jr1l84ACjcxK6I8E87Iv67AKxVW8Jr0_Cr1UM28EF7xvwVC2z280aV CY1x0267AKxVW8Jr0_Cr1UM2AIxVAIcxkEcVAq07x20xvEncxIr21l57IF6xkI12xvs2x2 6I8E6xACxx1l5I8CrVACY4xI64kE6c02F40Ex7xfMcIj6x8ErcxFaVAv8VWrMcvjeVCFs4 IE7xkEbVWUJVW8JwACjcxG0xvY0x0EwIxGrwCF04k20xvY0x0EwIxGrwCF04k20xvE74AG Y7Cv6cx26rWl4I8I3I0E4IkC6x0Yz7v_Jr0_Gr1lx2IqxVAqx4xG67AKxVWUJVWUGwC20s 026x8GjcxK67AKxVWUGVWUWwC2zVAF1VAY17CE14v26r126r1DMIIYrxkI7VAKI48JMIIF 0xvE2Ix0cI8IcVAFwI0_Ar0_tr1lIxAIcVC0I7IYx2IY6xkF7I0E14v26r4j6F4UMIIF0x vE42xK8VAvwI8IcIk0rVWUJVWUCwCI42IY6I8E87Iv67AKxVW8JVWxJwCI42IY6I8E87Iv 6xkF7I0E14v26r4j6r4UJbIYCTnIWIevJa73UjIFyTuYvj4RC_MaUUUUU Content-Transfer-Encoding: 8bit Add PCI CpuIo protocol.there is no fix translation offset between I/O port accesses and MMIO accesses. Add PciCpuIo2Dxe driver to implement EFI_CPU_IO2_PROTOCOL to add the translation for IO access. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4054 Cc: Ard Biesheuvel Cc: Bibo Mao Cc: Chao Li Cc: Leif Lindholm Cc: Liming Gao Cc: Michael D Kinney Signed-off-by: xianglai li Reviewed-by: Chao Li --- .../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c | 538 ++++++++++++++++++ .../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h | 207 +++++++ .../Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf | 44 ++ 3 files changed, 789 insertions(+) create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h create mode 100644 Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c new file mode 100644 index 0000000000..25417ff101 --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.c @@ -0,0 +1,538 @@ +/** @file + Produces the CPU I/O 2 Protocol. + + Copyright (c) 2022 Loongson Technology Corporation Limited. All rights reserved.
+ + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#include + +#include + +#include +#include +#include +#include +#include +#include "PciCpuIo2Dxe.h" + +// +// Handle for the CPU I/O 2 Protocol +// +STATIC EFI_HANDLE mHandle = NULL; + +// +// Lookup table for increment values based on transfer widths +// +STATIC CONST UINT8 mInStride[] = { + 1, // EfiCpuIoWidthUint8 + 2, // EfiCpuIoWidthUint16 + 4, // EfiCpuIoWidthUint32 + 8, // EfiCpuIoWidthUint64 + 0, // EfiCpuIoWidthFifoUint8 + 0, // EfiCpuIoWidthFifoUint16 + 0, // EfiCpuIoWidthFifoUint32 + 0, // EfiCpuIoWidthFifoUint64 + 1, // EfiCpuIoWidthFillUint8 + 2, // EfiCpuIoWidthFillUint16 + 4, // EfiCpuIoWidthFillUint32 + 8 // EfiCpuIoWidthFillUint64 +}; + +// +// Lookup table for increment values based on transfer widths +// +STATIC CONST UINT8 mOutStride[] = { + 1, // EfiCpuIoWidthUint8 + 2, // EfiCpuIoWidthUint16 + 4, // EfiCpuIoWidthUint32 + 8, // EfiCpuIoWidthUint64 + 1, // EfiCpuIoWidthFifoUint8 + 2, // EfiCpuIoWidthFifoUint16 + 4, // EfiCpuIoWidthFifoUint32 + 8, // EfiCpuIoWidthFifoUint64 + 0, // EfiCpuIoWidthFillUint8 + 0, // EfiCpuIoWidthFillUint16 + 0, // EfiCpuIoWidthFillUint32 + 0 // EfiCpuIoWidthFillUint64 +}; + +/** + Check parameters to a CPU I/O 2 Protocol service request. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The parameters for this request pass the checks. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +CpuIoCheckParameter ( + IN BOOLEAN MmioOperation, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + UINT64 MaxCount; + UINT64 Limit; + + // + // Check to see if Buffer is NULL + // + if (Buffer == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Check to see if Width is in the valid range + // + if ((UINT32)Width >= EfiCpuIoWidthMaximum) { + return EFI_INVALID_PARAMETER; + } + + // + // For FIFO type, the target address won't increase during the access, + // so treat Count as 1 + // + if ((Width >= EfiCpuIoWidthFifoUint8) + && (Width <= EfiCpuIoWidthFifoUint64)) + { + Count = 1; + } + + // + // Check to see if Width is in the valid range for I/O Port operations + // + Width = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); + if ((!MmioOperation) + && (Width == EfiCpuIoWidthUint64)) + { + return EFI_INVALID_PARAMETER; + } + + // + // Check to see if Address is aligned + // + if ((Address & (UINT64) (mInStride[Width] - 1)) != 0) { + return EFI_UNSUPPORTED; + } + + // + // Check to see if any address associated with this transfer exceeds the maximum + // allowed address. The maximum address implied by the parameters passed in is + // Address + Size * Count. If the following condition is met, then the transfer + // is not supported. + // + // Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1 + // + // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count + // can also be the maximum integer value supported by the CPU, this range + // check must be adjusted to avoid all overflow conditions. + // + // The following form of the range check is equivalent but assumes that + // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1). + // + Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS); + if (Count == 0) { + if (Address > Limit) { + return EFI_UNSUPPORTED; + } + } else { + MaxCount = RShiftU64 (Limit, Width); + if (MaxCount < (Count - 1)) { + return EFI_UNSUPPORTED; + } + if (Address > LShiftU64 (MaxCount - Count + 1, Width)) { + return EFI_UNSUPPORTED; + } + } + + // + // Check to see if Buffer is aligned + // + if (((UINTN)Buffer & ((MIN (sizeof (UINTN), mInStride[Width]) - 1))) != 0) { + return EFI_UNSUPPORTED; + } + + return EFI_SUCCESS; +} + +/** + Reads memory-mapped registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuMemoryServiceRead ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + UINT8 InStride; + UINT8 OutStride; + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; + UINT8 *Uint8Buffer; + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Select loop based on the width of the transfer + // + InStride = mInStride[Width]; + OutStride = mOutStride[Width]; + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { + if (OperationWidth == EfiCpuIoWidthUint8) { + *Uint8Buffer = MmioRead8 ((UINTN)Address); + } else if (OperationWidth == EfiCpuIoWidthUint16) { + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); + } else if (OperationWidth == EfiCpuIoWidthUint32) { + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); + } else if (OperationWidth == EfiCpuIoWidthUint64) { + *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); + } + } + return EFI_SUCCESS; +} + +/** + Writes memory-mapped registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuMemoryServiceWrite ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + EFI_STATUS Status; + UINT8 InStride; + UINT8 OutStride; + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; + UINT8 *Uint8Buffer; + + Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Select loop based on the width of the transfer + // + InStride = mInStride[Width]; + OutStride = mOutStride[Width]; + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { + if (OperationWidth == EfiCpuIoWidthUint8) { + MmioWrite8 ((UINTN)Address, *Uint8Buffer); + } else if (OperationWidth == EfiCpuIoWidthUint16) { + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); + } else if (OperationWidth == EfiCpuIoWidthUint32) { + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); + } else if (OperationWidth == EfiCpuIoWidthUint64) { + MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); + } + } + return EFI_SUCCESS; +} + +/** + Reads I/O registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuIoServiceRead ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + UINT8 InStride; + UINT8 OutStride; + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; + UINT8 *Uint8Buffer; + + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + Address += PcdGet64 (PcdPciIoTranslation); + + // + // Select loop based on the width of the transfer + // + InStride = mInStride[Width]; + OutStride = mOutStride[Width]; + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); + + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { + if (OperationWidth == EfiCpuIoWidthUint8) { + *Uint8Buffer = MmioRead8 ((UINTN)Address); + } else if (OperationWidth == EfiCpuIoWidthUint16) { + *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); + } else if (OperationWidth == EfiCpuIoWidthUint32) { + *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); + } + } + return EFI_SUCCESS; +} + +/** + Write I/O registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuIoServiceWrite ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + EFI_STATUS Status; + UINT8 InStride; + UINT8 OutStride; + EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; + UINT8 *Uint8Buffer; + + // + // Make sure the parameters are valid + // + Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + + Address += PcdGet64 (PcdPciIoTranslation); + + // + // Select loop based on the width of the transfer + // + InStride = mInStride[Width]; + OutStride = mOutStride[Width]; + OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); + + for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { + if (OperationWidth == EfiCpuIoWidthUint8) { + MmioWrite8 ((UINTN)Address, *Uint8Buffer); + } else if (OperationWidth == EfiCpuIoWidthUint16) { + MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); + } else if (OperationWidth == EfiCpuIoWidthUint32) { + MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); + } + } + return EFI_SUCCESS; +} + +// +// CPU I/O 2 Protocol instance +// +STATIC EFI_CPU_IO2_PROTOCOL mCpuIo2 = { + { + CpuMemoryServiceRead, + CpuMemoryServiceWrite + }, + { + CpuIoServiceRead, + CpuIoServiceWrite + } +}; + +/** + The user Entry Point for module CpuIo2Dxe. The user code starts with this function. + + @param[in] ImageHandle The firmware allocated handle for the EFI image. + @param[in] SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The entry point is executed successfully. + @retval other Some error occurs when executing this entry point. +**/ +EFI_STATUS +EFIAPI +PciCpuIo2Initialize ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiCpuIo2ProtocolGuid); + Status = gBS->InstallMultipleProtocolInterfaces ( + &mHandle, + &gEfiCpuIo2ProtocolGuid, &mCpuIo2, + NULL + ); + ASSERT_EFI_ERROR (Status); + return Status; +} diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h new file mode 100644 index 0000000000..2489429df7 --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.h @@ -0,0 +1,207 @@ +/** @file + Internal include file for the CPU I/O 2 Protocol. + + Copyright (c) 2022 Loongson Technology Corporation Limited. All rights reserved.
+ + SPDX-License-Identifier: BSD-2-Clause-Patent + +**/ + +#ifndef PCI_CPU_IO2_DXE_H_ +#define PCI_CPU_IO2_DXE_H_ + +#define MAX_IO_PORT_ADDRESS 0xFFFF + +/** + Reads memory-mapped registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuMemoryServiceRead ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ); + +/** + Writes memory-mapped registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuMemoryServiceWrite ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ); + +/** + Reads I/O registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuIoServiceRead ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ); + +/** + Write I/O registers. + + The I/O operations are carried out exactly as requested. The caller is responsible + for satisfying any alignment and I/O width restrictions that a PI System on a + platform might require. For example on some platforms, width requests of + EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will + be handled by the driver. + + If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, + or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for + each of the Count operations that is performed. + + If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, + EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times on the same Address. + + If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, + EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is + incremented for each of the Count operations that is performed. The read or + write operation is performed Count times from the first element of Buffer. + + @param[in] This A pointer to the EFI_CPU_IO2_PROTOCOL instance. + @param[in] Width Signifies the width of the I/O or Memory operation. + @param[in] Address The base address of the I/O operation. + @param[in] Count The number of I/O operations to perform. The number of + bytes moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store the results. + For write operations, the source buffer from which to write data. + + @retval EFI_SUCCESS The data was read from or written to the PI system. + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +EFIAPI +CpuIoServiceWrite ( + IN EFI_CPU_IO2_PROTOCOL *This, + IN EFI_CPU_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ); + +#endif // PCI_CPU_IO2_DXE_H_ diff --git a/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf new file mode 100644 index 0000000000..a8a14cddd2 --- /dev/null +++ b/Platform/Loongson/LoongArchQemuPkg/Drivers/PciCpuIo2Dxe/PciCpuIo2Dxe.inf @@ -0,0 +1,44 @@ +## @file +# Produces the CPU I/O 2 Protocol by using the services of the I/O Library. +# +# Copyright (c) 2022 Loongson Technology Corporation Limited. All rights reserved.
+# +# SPDX-License-Identifier: BSD-2-Clause-Patent +# +## + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = PciCpuIo2Dxe + FILE_GUID = 168D1A6E-F4A5-448A-9E95-795661BB3067 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = PciCpuIo2Initialize + +# +# VALID_ARCHITECTURES = LOONGARCH64 +# + +[Sources] + PciCpuIo2Dxe.c + +[Packages] + Platform/Loongson/LoongArchQemuPkg/Loongson.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + UefiDriverEntryPoint + BaseLib + DebugLib + IoLib + PcdLib + UefiBootServicesTableLib + +[Pcd] + gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation + +[Protocols] + gEfiCpuIo2ProtocolGuid ## PRODUCES + +[Depex] + TRUE -- 2.31.1