From: "Oleksiy Yakovlev" <oleksiyy@ami.com>
To: "Gao, Liming" <liming.gao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Wu, Hao A" <hao.a.wu@intel.com>,
"Yao, Jiewen" <jiewen.yao@intel.com>,
"Zhang, Chao B" <chao.b.zhang@intel.com>,
"Felix Polyudov" <Felixp@ami.com>, "Xu, Wei6" <wei6.xu@intel.com>
Subject: Re: [PATCH V7 5/6] MdeModulePkg: Add FMP Capsule Image Header extension
Date: Mon, 18 May 2020 22:09:30 +0000 [thread overview]
Message-ID: <6BD875C24FFE2A4E8D6EFC142C67836F03FFFFA5E6@atlms1.us.megatrends.com> (raw)
In-Reply-To: <BN6PR11MB3972BF160CD7C646E557544880BD0@BN6PR11MB3972.namprd11.prod.outlook.com>
Hi Liming.
>From Your comment here I understand that you are waiting for somebody else here.
But looking through your comments - I agree with comment 1, but think other two are incorrect.
So do I need to resubmit 2.8a series?
Regards, Oleksiy.
-----Original Message-----
From: Gao, Liming [mailto:liming.gao@intel.com]
Sent: Friday, May 15, 2020 2:13 AM
To: Oleksiy Yakovlev; devel@edk2.groups.io
Cc: Kinney, Michael D; Wang, Jian J; Wu, Hao A; Yao, Jiewen; Zhang, Chao B; Felix Polyudov; Xu, Wei6
Subject: RE: [PATCH V7 5/6] MdeModulePkg: Add FMP Capsule Image Header extension
Oleksiy:
When create PR, I find some issue in this patch. The same issue is also in SignedCapsulePkg. Because original comments from Xu Wei6, I would like Wei to provide the updated patch for MdeModulePkg and SignedCapsulePkg.
Thanks
Liming
> -----Original Message-----
> From: Oleksiy Yakovlev <oleksiyy@ami.com>
> Sent: Friday, May 15, 2020 4:52 AM
> To: devel@edk2.groups.io
> Cc: Gao, Liming <liming.gao@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Wu,
> Hao A <hao.a.wu@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>; Zhang, Chao B <chao.b.zhang@intel.com>; Felixp@ami.com;
> oleksiyy@ami.com
> Subject: [PATCH V7 5/6] MdeModulePkg: Add FMP Capsule Image Header extension
>
> Add bitmask to structure which gives a binary-inspectable mechanism to
> determine if a capsule contains an authentication section or depex section.
> (UEFI 2.8 errata a, mantis 2026)
>
> Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
>
> Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
> ---
> MdeModulePkg/Application/CapsuleApp/CapsuleDump.c | 7 ++++--
> .../Library/DxeCapsuleLibFmp/DxeCapsuleLib.c | 26 +++++++++++++++++-----
> 2 files changed, 25 insertions(+), 8 deletions(-)
>
> diff --git a/MdeModulePkg/Application/CapsuleApp/CapsuleDump.c b/MdeModulePkg/Application/CapsuleApp/CapsuleDump.c
> index 7e3e072..057bfa8 100644
> --- a/MdeModulePkg/Application/CapsuleApp/CapsuleDump.c
> +++ b/MdeModulePkg/Application/CapsuleApp/CapsuleDump.c
> @@ -96,8 +96,11 @@ DumpFmpCapsule (
> Print(L" UpdateImageIndex - 0x%x\n", FmpImageHeader->UpdateImageIndex);
> Print(L" UpdateImageSize - 0x%x\n", FmpImageHeader->UpdateImageSize);
> Print(L" UpdateVendorCodeSize - 0x%x\n", FmpImageHeader->UpdateVendorCodeSize);
> - if (FmpImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> - Print(L" UpdateHardwareInstance - 0x%lx\n", FmpImageHeader->UpdateHardwareInstance);
> + if (ImageHeader->Version >= 1) {
> + DEBUG((DEBUG_VERBOSE, " UpdateHardwareInstance - 0x%lx\n", ImageHeader->UpdateHardwareInstance));
> + if (ImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> + DEBUG((DEBUG_VERBOSE, " ImageCapsuleSupport - 0x%lx\n", ImageHeader->ImageCapsuleSupport));
> + }
> }
> }
[Liming] Here should be FmpImageHeader
> }
> diff --git a/MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.c b/MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.c
> index 5dda561..68cece6 100644
> --- a/MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.c
> +++ b/MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.c
> @@ -285,8 +285,10 @@ ValidateFmpCapsule (
> DEBUG((DEBUG_ERROR, "ImageHeader->Version(0x%x) Unknown\n", ImageHeader->Version));
> return EFI_INVALID_PARAMETER;
> }
> - if (ImageHeader->Version < EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> + if (ImageHeader->Version == 1) {
> FmpImageHeaderSize = OFFSET_OF(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, UpdateHardwareInstance);
> + } else {
> + FmpImageHeaderSize = OFFSET_OF(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, ImageCapsuleSupport);
> }
[Liming] Here should have one condition for ImageHeader->Version == 2.
> if (FmpImageSize < FmpImageHeaderSize) {
> DEBUG((DEBUG_ERROR, "FmpImageSize(0x%lx) < FmpImageHeaderSize(0x%x)\n", FmpImageSize, FmpImageHeaderSize));
> @@ -519,8 +521,11 @@ DumpFmpCapsule (
> DEBUG((DEBUG_VERBOSE, " UpdateImageIndex - 0x%x\n", ImageHeader->UpdateImageIndex));
> DEBUG((DEBUG_VERBOSE, " UpdateImageSize - 0x%x\n", ImageHeader->UpdateImageSize));
> DEBUG((DEBUG_VERBOSE, " UpdateVendorCodeSize - 0x%x\n", ImageHeader->UpdateVendorCodeSize));
> - if (ImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> - DEBUG((DEBUG_VERBOSE, " UpdateHardwareInstance - 0x%lx\n", ImageHeader->UpdateHardwareInstance));
> + if (ImageHeader->Version >= 1) {
[Liming] Here should be ImageHeader->Version >= 2.
Thanks
Liming
> + DEBUG((DEBUG_INFO, "(UpdateHardwareInstance - 0x%x)", ImageHeader->UpdateHardwareInstance));
> + if (ImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> + DEBUG((DEBUG_INFO, "(ImageCapsuleSupport - 0x%x)", ImageHeader->ImageCapsuleSupport));
> + }
> }
> }
> }
> @@ -928,9 +933,14 @@ SetFmpImageData (
> } else {
> //
> // If the EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER is version 1,
> - // Header should exclude UpdateHardwareInstance field
> + // Header should exclude UpdateHardwareInstance field, and
> + // ImageCapsuleSupport field if version is 2.
> //
> - Image = (UINT8 *)ImageHeader + OFFSET_OF(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER,
> UpdateHardwareInstance);
> + if (ImageHeader->Version == 1) {
> + Image = (UINT8 *)ImageHeader + OFFSET_OF(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER,
> UpdateHardwareInstance);
> + } else {
> + Image = (UINT8 *)ImageHeader + OFFSET_OF(EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER, ImageCapsuleSupport);
> + }
> }
>
> if (ImageHeader->UpdateVendorCodeSize == 0) {
> @@ -945,6 +955,7 @@ SetFmpImageData (
> DEBUG((DEBUG_INFO, "ImageIndex - 0x%x ", ImageHeader->UpdateImageIndex));
> if (ImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> DEBUG((DEBUG_INFO, "(UpdateHardwareInstance - 0x%x)", ImageHeader->UpdateHardwareInstance));
> + DEBUG((DEBUG_INFO, "(ImageCapsuleSupport - 0x%x)", ImageHeader->ImageCapsuleSupport));
> }
> DEBUG((DEBUG_INFO, "\n"));
>
> @@ -1239,7 +1250,10 @@ ProcessFmpCapsuleImage (
> ImageHeader = (EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER *)((UINT8 *)FmpCapsuleHeader +
> ItemOffsetList[Index]);
>
> UpdateHardwareInstance = 0;
> - if (ImageHeader->Version >= EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER_INIT_VERSION) {
> + ///
> + /// UpdateHardwareInstance field was added in Version 2
> + ///
> + if (ImageHeader->Version >= 2) {
> UpdateHardwareInstance = ImageHeader->UpdateHardwareInstance;
> }
>
> --
> 2.9.0.windows.1
>
>
> Please consider the environment before printing this email.
>
> The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication
> is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is
> not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please
> promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission.
Please consider the environment before printing this email.
The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission.
next prev parent reply other threads:[~2020-05-18 22:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 20:51 [PATCH V7 0/6] Add definitions introduced in UEFI 2.8a Oleksiy Yakovlev
2020-05-14 20:51 ` [PATCH V7 1/6] MdePkg: Add new CPER Notification types Oleksiy Yakovlev
2020-05-14 20:51 ` [PATCH V7 2/6] MdePkg: Fix OUT parameters marked as IN OUT Oleksiy Yakovlev
2020-05-14 20:51 ` [PATCH V7 3/6] MdePkg: Add EFI_RT_PROPERTIES_TABLE Oleksiy Yakovlev
2020-05-14 20:51 ` [PATCH V7 4/6] MdePkg: Add FMP Capsule Image Header extension Oleksiy Yakovlev
2020-05-14 20:51 ` [PATCH V7 5/6] MdeModulePkg: " Oleksiy Yakovlev
2020-05-15 6:13 ` Liming Gao
2020-05-18 22:09 ` Oleksiy Yakovlev [this message]
2020-05-19 0:39 ` [edk2-devel] " Liming Gao
2020-05-19 15:42 ` Oleksiy Yakovlev
2020-05-20 13:57 ` Oleksiy Yakovlev
2020-05-20 14:22 ` Liming Gao
[not found] ` <160F1EEE36EFCBA2.23170@groups.io>
2020-05-15 8:33 ` Liming Gao
2020-05-14 20:51 ` [PATCH V7 6/6] SignedCapsulePkg: " Oleksiy Yakovlev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6BD875C24FFE2A4E8D6EFC142C67836F03FFFFA5E6@atlms1.us.megatrends.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox