public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
To: Eric Jin <eric.jin@intel.com>, edk2-devel@lists.01.org
Subject: Re: [edk2-test][Patch v3 1/2] uefi-sct/SctPkg:Add checkpoint of ReadKeyStrokeEx Toggle state
Date: Mon, 12 Nov 2018 13:04:26 -0600	[thread overview]
Message-ID: <6ae2a54997ebdc1f5533d4da1b0d5c99f6c0fad0.camel@arm.com> (raw)
In-Reply-To: <20181109052309.12276-1-eric.jin@intel.com>

PATCH Series 
Acked-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Minor indentation issues persist, but rest looks good.


On Fri, 2018-11-09 at 13:23 +0800, Eric Jin wrote:
> The patch is applied to the EFI part.
> 
> UEFI drivers which implement the EFI_SIMPLE_TEXT_INPUT_EX protocol
> are required to return KeyData.Key and KeyData.KeyState values.
> These drivers must always return the most current state of
> KeyData.KeyState.KeyShiftState and KeyData.KeyState.KeyToggleState.
> 
> The change in spec is "EFI_NOT_READY - There was no keystroke
> data available. Current KeyData.KeyState values are exposed."
> 
> Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin <eric.jin@intel.com>
> ---
>  .../Protocol/SimpleTextInputEx/BlackBoxTest/Guid.c |   6 +-
>  .../Protocol/SimpleTextInputEx/BlackBoxTest/Guid.h |  12 +-
>  .../BlackBoxTest/SimpleTextInputExBBTestFunction.c | 215
> +++++++++++++++++++++
>  .../BlackBoxTest/SimpleTextInputExBBTestMain.c     |  11 +-
>  .../BlackBoxTest/SimpleTextInputExBBTestMain.h     |  20 +-
>  5 files changed, 260 insertions(+), 4 deletions(-)
> 
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.c b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.c
> index 9cb19f4..f72bbdd 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.c
> +++ b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.c
> @@ -1,7 +1,7 @@
>  /** @file
>  
>    Copyright 2006 - 2012 Unified EFI, Inc.<BR>
> -  Copyright (c) 2010 - 2012, Intel Corporation. All rights
> reserved.<BR>
> +  Copyright (c) 2010 - 2018, Intel Corporation. All rights
> reserved.<BR>
>  
>    This program and the accompanying materials
>    are licensed and made available under the terms and conditions of
> the BSD License
> @@ -63,3 +63,7 @@ EFI_GUID
> gSimpleTextInputExBBTestFunctionAssertionGuid007 =
> EFI_TEST_SIMPLETEXTI
>  EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid008 =
> EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_008_GUID;
>  
>  EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid009 =
> EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_009_GUID;
> +
> +EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid010 =
> EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_010_GUID;
> +
> +EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid011 =
> EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_011_GUID;
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.h b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.h
> index 6c90fca..2a6be48 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.h
> +++ b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> Guid.h
> @@ -1,7 +1,7 @@
>  /** @file
>  
>    Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -  Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +  Copyright (c) 2010 - 2018, Intel Corporation. All rights
> reserved.<BR>
>  
>    This program and the accompanying materials
>    are licensed and made available under the terms and conditions of
> the BSD License
> @@ -119,3 +119,13 @@ extern EFI_GUID
> gSimpleTextInputExBBTestFunctionAssertionGuid008;
>  { 0x534369f7, 0x8399, 0x4353, { 0x94, 0xad, 0xc4, 0x48, 0xfa, 0xda,
> 0xeb, 0x84 } }
>  
>  extern EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid009;
> +
> +#define EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_010_GUID
> \
> +{ 0xcf4d54eb, 0x6696, 0x4794, { 0x91, 0x74, 0x59, 0xd, 0x1c, 0x22,
> 0xa8, 0x67 } }
> +
> +extern EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid010;
> +
> +#define EFI_TEST_SIMPLETEXTINPUTEXBBTESTFUNCTION_ASSERTION_011_GUID
> \
> +{ 0xf8e8f879, 0xa6d4, 0x4fd3, { 0x8b, 0x8e, 0xba, 0x1d, 0x18, 0xf1,
> 0x40, 0x71 } }
> +
> +extern EFI_GUID gSimpleTextInputExBBTestFunctionAssertionGuid011;
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestFunction.c b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestFunction.c
> index 153ade0..2f6ad7d 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestFunction.c
> +++ b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestFunction.c
> @@ -456,6 +456,79 @@ BBTestUnregisterKeyNotifyFunctionManualTest (
>  }
>  
>  
> +EFI_STATUS
> +BBTestReadKeyStrokeExFunctionAutoTest (
> +  IN EFI_BB_TEST_PROTOCOL       *This,
> +  IN VOID                       *ClientInterface,
> +  IN EFI_TEST_LEVEL             TestLevel,
> +  IN EFI_HANDLE                 SupportHandle
> +  )
> +{
> +  EFI_STANDARD_TEST_LIBRARY_PROTOCOL    *StandardLib;
> +  EFI_STATUS                            Status;
> +  EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL     *SimpleTextInputEx;
> +  
> +  EFI_DEVICE_PATH_PROTOCOL             *DevicePath;
> +  CHAR16                               *DevicePathStr;
> +
> +  //
> +  // init
> +  //
> +  SimpleTextInputEx =
> (EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL*)ClientInterface;
> +
> +  //
> +  // Get the Standard Library Interface
> +  //
> +  Status = gtBS->HandleProtocol (
> +                   SupportHandle,
> +                   &gEfiStandardTestLibraryGuid,
> +                   (VOID **) &StandardLib
> +                   );
> +  if (EFI_ERROR(Status)) {
> +    return Status;
> +  }
> +  
> +  //
> +  // Get Device Path of current Simple_Text_Input_Ex_Protocol
> +  // And out put device path or device name
> +  //
> +  Status = LocateDevicePathFromSimpleTextInputEx (SimpleTextInputEx,
> &DevicePath, StandardLib);
> +  if (Status == EFI_SUCCESS) {
> +    DevicePathStr = SctDevicePathToStr (DevicePath);
> +    if (DevicePathStr != NULL) {
> +      StandardLib->RecordMessage (
> +                     StandardLib,
> +                     EFI_VERBOSE_LEVEL_DEFAULT,
> +                     L"\r\nCurrent Device: %s",
> +                     DevicePathStr
> +                     );
> +      Status = gtBS->FreePool (DevicePathStr);
> +      if (EFI_ERROR(Status))
> +        return Status;
> +      DevicePathStr=NULL;
> +    }
> +  } else {
> +    //
> +    // Console Splitter/StdErr
> +    //
> +    StandardLib->RecordMessage (
> +                   StandardLib,
> +                   EFI_VERBOSE_LEVEL_DEFAULT,
> +                   L"\r\nCurrent Device: %s",
> +                   L"ConsoleSplitter/TxtIn"
> +                   );
> +  }
> +
> +  //
> +  // Call check point
> +  //
> +  BBTestReadKeyStrokeExFunctionAutoTestCheckpoint1 ( StandardLib,
> SimpleTextInputEx );
> +  
> +  return EFI_SUCCESS;
> +}
> +
> +
> +
>  //
>  //Check Points
>  //
> @@ -1061,3 +1134,145 @@
> BBTestUnregisterKeyNotifyFunctionManualTestCheckpoint1 (
>  
>    return EFI_SUCCESS;
>  }
> +
> +EFI_STATUS
> +BBTestReadKeyStrokeExFunctionAutoTestCheckpoint1 (
> +  IN EFI_STANDARD_TEST_LIBRARY_PROTOCOL         *StandardLib,
> +  IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL          *SimpleTextInputEx
> +  )
> +{
> +  EFI_STATUS            Status;
> +  EFI_TEST_ASSERTION    AssertionType;
> +  EFI_KEY_DATA          Key;
> +  UINT8                 Index;
> +  EFI_KEY_TOGGLE_STATE  State;
> +  EFI_KEY_TOGGLE_STATE  ValidState[] = {
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_SCROLL_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_NUM_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_CAPS_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_SCROLL_LOCK_ACTIVE | EFI_NUM_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_SCROLL_LOCK_ACTIVE |
> EFI_CAPS_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_NUM_LOCK_ACTIVE | EFI_CAPS_LOCK_ACTIVE,
> +                          EFI_TOGGLE_STATE_VALID |
> EFI_KEY_STATE_EXPOSED | EFI_SCROLL_LOCK_ACTIVE |EFI_NUM_LOCK_ACTIVE |
> EFI_CAPS_LOCK_ACTIVE,
> +                          0
> +                          };  
> +
> +  State = EFI_TOGGLE_STATE_VALID | EFI_KEY_STATE_EXPOSED;
> +
> +  //
> +  //Read next keystroke from the input device
> +  //
> +  Status = SimpleTextInputEx->ReadKeyStrokeEx (
> +                                  SimpleTextInputEx, 
> +                                  &Key
> +                                  );
> +  if ((Status != EFI_SUCCESS) && (Status != EFI_NOT_READY)) {
> +    return Status;
> +  }
> +
> +  if ((Key.KeyState.KeyToggleState & EFI_TOGGLE_STATE_VALID) == 0) {
> +    return EFI_UNSUPPORTED;
> +  }
> +
> +  //
> +  //Set the KEY_STATE_EXPOSED to check the imcomplete keystroke
> support
> +  //
> +  Status = SimpleTextInputEx->SetState (
> +                                SimpleTextInputEx,
> +                                &State
> +                                );
> +
> +  if (EFI_ERROR(Status)) {
> +    StandardLib->RecordAssertion (
> +                   StandardLib,
> +                   EFI_TEST_ASSERTION_WARNING,
> +                   gTestGenericFailureGuid,
> +                   L"EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.SetState -
> SetState() doesn't return EFI_SUCCESS with EFI_KEY_STATE_EXPOSED",
> +                   L"%a:%d, Status = %r\n",
> +                   __FILE__,
> +                   (UINTN)__LINE__,
> +                   Status
> +                   );
> +    return Status;
> +  }
> +
> +  for (Index=0; ValidState[Index]; Index++) {
> +
> +    //
> +    // Set the valid KeyToggleState
> +    // With EFI_KEY_STATE_EXPOSED bit enabled
> +    //
> +    Status = SimpleTextInputEx->SetState (
> +                                  SimpleTextInputEx,
> +                                  ValidState + Index
> +                                  );
> +  
> +    if (Status != EFI_SUCCESS) {
> +      StandardLib->RecordAssertion (
> +                     StandardLib,
> +                     EFI_TEST_ASSERTION_FAILED,
> +                     gTestGenericFailureGuid,
> +                     L"EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.SetState -
> SetState() doesn't return EFI_SUCCESS with the valid KeyToggleState",
> +                     L"%a:%d, Status = %r, KeyToggleState = %x\n",
> +                     __FILE__,
> +                     (UINTN)__LINE__,
> +                     Status,
> +                     ValidState[Index]
> +                     );
> +      continue;
> +    }
> +
> +    //
> +    // Get the KeyToggleState, and return status should be
> EFI_NOT_READY.
> +    // the ReadKeyStrokeEx function will allow the return of
> +    // incomplete keystrokes such as there is no Key data.
> +    //
> +    Status = SimpleTextInputEx->ReadKeyStrokeEx (
> +                                  SimpleTextInputEx, 
> +                                  &Key
> +                                  );
> +
> +    if (Status != EFI_NOT_READY) {
> +      AssertionType = EFI_TEST_ASSERTION_FAILED;
> +
> +      StandardLib->RecordAssertion (
> +                     StandardLib,
> +                     AssertionType,
> +                     gSimpleTextInputExBBTestFunctionAssertionGuid01
> 0,
> +                     L"EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.ReadKeyStro
> keEx - ReadKeyStrokeEx() doesn't return EFI_NOT_READY when there is
> no Key data and EFI_KEY_STATE_EXPOSED is enabled",
> +                     L"%a:%d, Status = %r, Index = %d,
> KeyToggleState = %x\n",
> +                     __FILE__,
> +                     (UINTN)__LINE__,
> +                     Status,
> +                     Index,
> +                     ValidState[Index]
> +                     );
> +
> +    } else {
> +      if ((Key.KeyState.KeyToggleState == ValidState[Index]) &&
> +        ((Key.KeyState.KeyShiftState == 0) ||
> (Key.KeyState.KeyShiftState == EFI_SHIFT_STATE_VALID)) &&
> +        ((Key.Key.ScanCode == 0) && (Key.Key.UnicodeChar == 0))) {
> +        AssertionType = EFI_TEST_ASSERTION_PASSED;
> +      } else {
> +        AssertionType = EFI_TEST_ASSERTION_FAILED;
> +      }
> +
> +      StandardLib->RecordAssertion (
> +                     StandardLib,
> +                     AssertionType,
> +                     gSimpleTextInputExBBTestFunctionAssertionGuid01
> 1,
> +                     L"EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.ReadKeyStro
> keEx - ReadKeyStrokeEx() should get the ValidState with EFI_NOT_READY
> and other field is zero",
> +                     L"%a:%d, Status = %r, Index = %d,
> KeyToggleState = %x, expect State = %x\n",
> +                     __FILE__,
> +                     (UINTN)__LINE__,
> +                     Status,
> +                     Index,
> +                     Key.KeyState.KeyToggleState,
> +                     ValidState[Index]
> +                     );
> +
> +    }
> +  }
> +
> +  return EFI_SUCCESS;
> +}
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.c b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.c
> index fdbc90f..dc15509 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.c
> +++ b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.c
> @@ -1,7 +1,7 @@
>  /** @file
>  
>    Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -  Copyright (c) 2010 - 2017, Intel Corporation. All rights
> reserved.<BR>
> +  Copyright (c) 2010 - 2018, Intel Corporation. All rights
> reserved.<BR>
>  
>    This program and the accompanying materials
>    are licensed and made available under the terms and conditions of
> the BSD License
> @@ -106,6 +106,15 @@ EFI_BB_TEST_ENTRY_FIELD gBBTestEntryField[] = {
>    },
>  #endif
>    {
> +    EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_TEST_ENTRY_GUID0107,
> +    L"ReadKeyStrokeExFunctionAuto",
> +    L"Function Auto test for Simple Text Input Ex Protocol
> ReadKeyStrokeEx().",
> +    EFI_TEST_LEVEL_MINIMAL,
> +    gSupportProtocolGuid,
> +    EFI_TEST_CASE_AUTO,
> +    BBTestReadKeyStrokeExFunctionAutoTest
> +  },
> +  {
>      EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_TEST_ENTRY_GUID0201,
>      L"ReadKeyStrokeExConformance",
>      L"Conformance test for Simple Text Input Ex Protocol
> ReadKeyStrokeEx().",
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.h b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.h
> index cb2160b..b1d6698 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.h
> +++ b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleTextInputEx/BlackBoxTest/
> SimpleTextInputExBBTestMain.h
> @@ -1,7 +1,7 @@
>  /** @file
>  
>    Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -  Copyright (c) 2010 - 2017, Intel Corporation. All rights
> reserved.<BR>
> +  Copyright (c) 2010 - 2018, Intel Corporation. All rights
> reserved.<BR>
>  
>    This program and the accompanying materials
>    are licensed and made available under the terms and conditions of
> the BSD License
> @@ -57,6 +57,8 @@ Abstract:
>  #define EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_TEST_ENTRY_GUID0106 \
>  { 0xdbc6e659, 0xb0e0, 0x4471, { 0x94, 0x13, 0x45, 0x1b, 0xdc, 0xe2,
> 0xad, 0xc7 } }
>  
> +#define EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_TEST_ENTRY_GUID0107 \
> +{ 0x2c3ca282, 0x5644, 0x41b6, { 0xaf, 0xc9, 0x43, 0x87, 0xf2, 0x53,
> 0x89, 0xbd } }
>  //
>  // Entry GUIDs for Conf Test
>  //
> @@ -155,6 +157,15 @@ BBTestUnregisterKeyNotifyFunctionManualTest (
>    IN EFI_TEST_LEVEL             TestLevel,
>    IN EFI_HANDLE                 SupportHandle
>    );
> +
> +
> +EFI_STATUS
> +BBTestReadKeyStrokeExFunctionAutoTest (
> +  IN EFI_BB_TEST_PROTOCOL       *This,
> +  IN VOID                       *ClientInterface,
> +  IN EFI_TEST_LEVEL             TestLevel,
> +  IN EFI_HANDLE                 SupportHandle
> +  );
>    
>    
>  EFI_STATUS
> @@ -239,6 +250,13 @@
> BBTestUnregisterKeyNotifyFunctionManualTestCheckpoint1 (
>  
>  
>  EFI_STATUS
> +BBTestReadKeyStrokeExFunctionAutoTestCheckpoint1 (
> +  IN EFI_STANDARD_TEST_LIBRARY_PROTOCOL         *StandardLib,
> +  IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL          *SimpleTextInputEx
> +  );
> +
> +
> +EFI_STATUS
>  BBTestReadKeyStrokeExConformanceTestCheckpoint1 (
>    IN EFI_STANDARD_TEST_LIBRARY_PROTOCOL         *StandardLib,
>    IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL          *SimpleTextInputEx



      reply	other threads:[~2018-11-12 19:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-09  5:23 [edk2-test][Patch v3 1/2] uefi-sct/SctPkg:Add checkpoint of ReadKeyStrokeEx Toggle state Eric Jin
2018-11-12 19:04 ` Supreeth Venkatesh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ae2a54997ebdc1f5533d4da1b0d5c99f6c0fad0.camel@arm.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox