From: "Ni, Ruiyu" <ruiyu.ni@Intel.com>
To: Guo Heyi <heyi.guo@linaro.org>
Cc: edk2-devel@lists.01.org,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Star Zeng <star.zeng@intel.com>, Eric Dong <eric.dong@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Michael D Kinney <michael.d.kinney@intel.com>
Subject: Re: [PATCH v5 4/6] MdeModulePkg/PciHostBridgeDxe: Add support for address translation
Date: Wed, 7 Mar 2018 12:30:59 +0800 [thread overview]
Message-ID: <71a21699-a1b3-155a-e743-ee5e6288ce20@Intel.com> (raw)
In-Reply-To: <20180306024440.GA90780@SZX1000114654>
On 3/6/2018 10:44 AM, Guo Heyi wrote:
> Hi Ray,
>
> Any comments for v5?
Heyi,
Some backward compatibility concerns were received from internal
production teams. Current change will cause silent failure on old
platforms because TranslationOffset might be random if uninitialized.
I will solve the concern and then send out updates to you, hopefully by
end of next week.
>
> Regards,
>
> Heyi
>
> On Thu, Mar 01, 2018 at 02:57:22PM +0800, Heyi Guo wrote:
>> PCI address translation is necessary for some non-x86 platforms. On
>> such platforms, address value (denoted as "device address" or "address
>> in PCI view") set to PCI BAR registers in configuration space might be
>> different from the address which is used by CPU to access the
>> registers in memory BAR or IO BAR spaces (denoted as "host address" or
>> "address in CPU view"). The difference between the two addresses is
>> called "Address Translation Offset" or simply "translation", and can
>> be represented by "Address Translation Offset" in ACPI QWORD Address
>> Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
>> definitions of QWORD Address Space Descriptor, and we will follow UEFI
>> definition on UEFI protocols, such as PCI root bridge IO protocol and
>> PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
>> to apply to the Starting address to convert it to a PCI address". This
>> means:
>>
>> 1. Translation = device address - host address.
>>
>> 2. PciRootBridgeIo->Configuration should return CPU view address, as
>> well as PciIo->GetBarAttributes.
>>
>> Summary of addresses used in protocol interfaces and internal
>> implementations:
>>
>> 1. *Only* the following protocol interfaces assume Address is Device
>> Address:
>> (1). PciHostBridgeResourceAllocation.GetProposedResources()
>> Otherwise PCI bus driver cannot set correct address into PCI
>> BARs.
>> (2). PciRootBridgeIo.Mem.Read() and PciRootBridgeIo.Mem.Write()
>> (3). PciRootBridgeIo.CopyMem()
>> UEFI and PI spec have clear statements for all other protocol
>> interfaces about the address type.
>>
>> 2. Library interfaces and internal implementation:
>> (1). Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
>> It is easy to check whether the address is below 4G or above 4G.
>> (2). Addresses in PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode are host
>> address, for they are allocated from GCD.
>> (3). Address passed to PciHostBridgeResourceConflict is host address,
>> for it comes from PCI_ROOT_BRIDGE_INSTANCE.ResAllocNode.
>>
>> RESTRICTION: to simplify the situation, we require the alignment of
>> Translation must be larger than any BAR alignment in the same root
>> bridge, so that resource allocation alignment can be applied to both
>> device address and host address.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
>> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Cc: Star Zeng <star.zeng@intel.com>
>> Cc: Eric Dong <eric.dong@intel.com>
>> Cc: Laszlo Ersek <lersek@redhat.com>
>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>> ---
>>
>> Notes:
>> v5:
>> - Add check for the alignment of Translation against the BAR alignment
>> [Ray]
>> - Keep coding style of comments consistent with the context [Ray]
>> - Comment change for Base in PCI_RES_NODE [Ray]
>> - Add macros of TO_HOST_ADDRESS and TO_DEVICE_ADDRESS for address type
>> conversion (After that we can also simply the comments about the
>> calculation [Ray]
>> - Add check for bus translation offset in CreateRootBridge(), making
>> sure it is zero, and unify code logic for all types of resource
>> after that [Ray]
>> - Use GetTranslationByResourceType() to simplify the code in
>> RootBridgeIoConfiguration() (also fix a bug in previous patch
>> version of missing a break after case TypePMem64) [Ray]
>> - Commit message refinement [Ray]
>>
>> v4:
>> - Add ASSERT (FALSE) to default branch in GetTranslationByResourceType
>> [Laszlo]
>> - Fix bug when passing BaseAddress to gDS->AllocateIoSpace and
>> gDS->AllocateMemorySpace [Laszlo]
>> - Add comment for applying alignment to both device address and host
>> address, and add NOTE for the alignment requirement of Translation,
>> as well as in commit message [Laszlo][Ray]
>> - Improve indention for the code in CreateRootBridge [Laszlo]
>> - Improve comment for Translation in PCI_ROOT_BRIDGE_APERTURE
>> definition [Laszlo]
>> - Ignore translation of bus in CreateRootBridge
>>
>> v4:
>> - Add ASSERT (FALSE) to default branch in GetTranslationByResourceType
>> [Laszlo]
>> - Fix bug when passing BaseAddress to gDS->AllocateIoSpace and
>> gDS->AllocateMemorySpace [Laszlo]
>> - Add comment for applying alignment to both device address and host
>> address, and add NOTE for the alignment requirement of Translation,
>> as well as in commit message [Laszlo][Ray]
>> - Improve indention for the code in CreateRootBridge [Laszlo]
>> - Improve comment for Translation in PCI_ROOT_BRIDGE_APERTURE
>> definition [Laszlo]
>> - Ignore translation of bus in CreateRootBridge
>>
>> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h | 21 ++++
>> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h | 3 +
>> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c | 129 +++++++++++++++++---
>> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 118 ++++++++++++++++--
>> 4 files changed, 245 insertions(+), 26 deletions(-)
>>
>> diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h
>> index 9a8ca21f4819..c2791ea5c2a4 100644
>> --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h
>> +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h
>> @@ -38,6 +38,13 @@ typedef struct {
>> #define PCI_HOST_BRIDGE_FROM_THIS(a) CR (a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE)
>>
>> //
>> +// Macros to translate device address to host address and vice versa. According
>> +// to UEFI 2.7, device address = host address + translation offset.
>> +//
>> +#define TO_HOST_ADDRESS(DeviceAddress,TranslationOffset) ((DeviceAddress) - (TranslationOffset))
>> +#define TO_DEVICE_ADDRESS(HostAddress,TranslationOffset) ((HostAddress) + (TranslationOffset))
>> +
>> +//
>> // Driver Entry Point
>> //
>> /**
>> @@ -247,6 +254,20 @@ ResourceConflict (
>> IN PCI_HOST_BRIDGE_INSTANCE *HostBridge
>> );
>>
>> +/**
>> + This routine gets translation offset from a root bridge instance by resource type.
>> +
>> + @param RootBridge The Root Bridge Instance for the resources.
>> + @param ResourceType The Resource Type of the translation offset.
>> +
>> + @retval The Translation Offset of the specified resource.
>> +**/
>> +UINT64
>> +GetTranslationByResourceType (
>> + IN PCI_ROOT_BRIDGE_INSTANCE *RootBridge,
>> + IN PCI_RESOURCE_TYPE ResourceType
>> + );
>> +
>> extern EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
>> extern EFI_CPU_IO2_PROTOCOL *mCpuIo;
>> #endif
>> diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
>> index 8612c0c3251b..a6c3739db368 100644
>> --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
>> +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
>> @@ -38,6 +38,9 @@ typedef enum {
>>
>> typedef struct {
>> PCI_RESOURCE_TYPE Type;
>> + //
>> + // Base is a host address
>> + //
>> UINT64 Base;
>> UINT64 Length;
>> UINT64 Alignment;
>> diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
>> index 1494848c3e8c..42ded2855c71 100644
>> --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
>> +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
>> @@ -33,6 +33,39 @@ EFI_EVENT mIoMmuEvent;
>> VOID *mIoMmuRegistration;
>>
>> /**
>> + This routine gets translation offset from a root bridge instance by resource type.
>> +
>> + @param RootBridge The Root Bridge Instance for the resources.
>> + @param ResourceType The Resource Type of the translation offset.
>> +
>> + @retval The Translation Offset of the specified resource.
>> +**/
>> +UINT64
>> +GetTranslationByResourceType (
>> + IN PCI_ROOT_BRIDGE_INSTANCE *RootBridge,
>> + IN PCI_RESOURCE_TYPE ResourceType
>> + )
>> +{
>> + switch (ResourceType) {
>> + case TypeIo:
>> + return RootBridge->Io.Translation;
>> + case TypeMem32:
>> + return RootBridge->Mem.Translation;
>> + case TypePMem32:
>> + return RootBridge->PMem.Translation;
>> + case TypeMem64:
>> + return RootBridge->MemAbove4G.Translation;
>> + case TypePMem64:
>> + return RootBridge->PMemAbove4G.Translation;
>> + case TypeBus:
>> + return RootBridge->Bus.Translation;
>> + default:
>> + ASSERT (FALSE);
>> + return 0;
>> + }
>> +}
>> +
>> +/**
>> Ensure the compatibility of an IO space descriptor with the IO aperture.
>>
>> The IO space descriptor can come from the GCD IO space map, or it can
>> @@ -366,6 +399,7 @@ InitializePciHostBridge (
>> UINTN MemApertureIndex;
>> BOOLEAN ResourceAssigned;
>> LIST_ENTRY *Link;
>> + UINT64 HostAddress;
>>
>> RootBridges = PciHostBridgeGetRootBridges (&RootBridgeCount);
>> if ((RootBridges == NULL) || (RootBridgeCount == 0)) {
>> @@ -411,8 +445,15 @@ InitializePciHostBridge (
>> }
>>
>> if (RootBridges[Index].Io.Base <= RootBridges[Index].Io.Limit) {
>> + //
>> + // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
>> + // For GCD resource manipulation, we need to use host address.
>> + //
>> + HostAddress = TO_HOST_ADDRESS (RootBridges[Index].Io.Base,
>> + RootBridges[Index].Io.Translation);
>> +
>> Status = AddIoSpace (
>> - RootBridges[Index].Io.Base,
>> + HostAddress,
>> RootBridges[Index].Io.Limit - RootBridges[Index].Io.Base + 1
>> );
>> ASSERT_EFI_ERROR (Status);
>> @@ -422,7 +463,7 @@ InitializePciHostBridge (
>> EfiGcdIoTypeIo,
>> 0,
>> RootBridges[Index].Io.Limit - RootBridges[Index].Io.Base + 1,
>> - &RootBridges[Index].Io.Base,
>> + &HostAddress,
>> gImageHandle,
>> NULL
>> );
>> @@ -443,14 +484,20 @@ InitializePciHostBridge (
>>
>> for (MemApertureIndex = 0; MemApertureIndex < ARRAY_SIZE (MemApertures); MemApertureIndex++) {
>> if (MemApertures[MemApertureIndex]->Base <= MemApertures[MemApertureIndex]->Limit) {
>> + //
>> + // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
>> + // For GCD resource manipulation, we need to use host address.
>> + //
>> + HostAddress = TO_HOST_ADDRESS (MemApertures[MemApertureIndex]->Base,
>> + MemApertures[MemApertureIndex]->Translation);
>> Status = AddMemoryMappedIoSpace (
>> - MemApertures[MemApertureIndex]->Base,
>> + HostAddress,
>> MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
>> EFI_MEMORY_UC
>> );
>> ASSERT_EFI_ERROR (Status);
>> Status = gDS->SetMemorySpaceAttributes (
>> - MemApertures[MemApertureIndex]->Base,
>> + HostAddress,
>> MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
>> EFI_MEMORY_UC
>> );
>> @@ -463,7 +510,7 @@ InitializePciHostBridge (
>> EfiGcdMemoryTypeMemoryMappedIo,
>> 0,
>> MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
>> - &MemApertures[MemApertureIndex]->Base,
>> + &HostAddress,
>> gImageHandle,
>> NULL
>> );
>> @@ -654,6 +701,11 @@ AllocateResource (
>> if (BaseAddress < Limit) {
>> //
>> // Have to make sure Aligment is handled since we are doing direct address allocation
>> + // Strictly speaking, alignment requirement should be applied to device
>> + // address instead of host address which is used in GCD manipulation below,
>> + // but as we restrict the alignment of Translation to be larger than any BAR
>> + // alignment in the root bridge, we can simplify the situation and consider
>> + // the same alignment requirement is also applied to host address.
>> //
>> BaseAddress = ALIGN_VALUE (BaseAddress, LShiftU64 (1, BitsOfAlignment));
>>
>> @@ -721,6 +773,7 @@ NotifyPhase (
>> PCI_RESOURCE_TYPE Index2;
>> BOOLEAN ResNodeHandled[TypeMax];
>> UINT64 MaxAlignment;
>> + UINT64 Translation;
>>
>> HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This);
>>
>> @@ -822,14 +875,43 @@ NotifyPhase (
>> BitsOfAlignment = LowBitSet64 (Alignment + 1);
>> BaseAddress = MAX_UINT64;
>>
>> + //
>> + // RESTRICTION: To simplify the situation, we require the alignment of
>> + // Translation must be larger than any BAR alignment in the same root
>> + // bridge, so that resource allocation alignment can be applied to
>> + // both device address and host address.
>> + //
>> + Translation = GetTranslationByResourceType (RootBridge, Index);
>> + if ((Translation & Alignment) != 0) {
>> + DEBUG ((DEBUG_ERROR, "[%a:%d] Translation %lx is not aligned to %lx!\n",
>> + __FUNCTION__, __LINE__, Translation, Alignment
>> + ));
>> + ASSERT (FALSE);
>> + //
>> + // This may be caused by too large alignment or too small
>> + // Translation; pick the 1st possibility and return out of resource,
>> + // which can also go thru the same process for out of resource
>> + // outside the loop.
>> + //
>> + ReturnStatus = EFI_OUT_OF_RESOURCES;
>> + continue;
>> + }
>> +
>> switch (Index) {
>> case TypeIo:
>> + //
>> + // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
>> + // For AllocateResource is manipulating GCD resource, we need to use
>> + // host address here.
>> + //
>> BaseAddress = AllocateResource (
>> FALSE,
>> RootBridge->ResAllocNode[Index].Length,
>> MIN (15, BitsOfAlignment),
>> - ALIGN_VALUE (RootBridge->Io.Base, Alignment + 1),
>> - RootBridge->Io.Limit
>> + TO_HOST_ADDRESS (ALIGN_VALUE (RootBridge->Io.Base, Alignment + 1),
>> + RootBridge->Io.Translation),
>> + TO_HOST_ADDRESS (RootBridge->Io.Limit,
>> + RootBridge->Io.Translation)
>> );
>> break;
>>
>> @@ -838,8 +920,10 @@ NotifyPhase (
>> TRUE,
>> RootBridge->ResAllocNode[Index].Length,
>> MIN (63, BitsOfAlignment),
>> - ALIGN_VALUE (RootBridge->MemAbove4G.Base, Alignment + 1),
>> - RootBridge->MemAbove4G.Limit
>> + TO_HOST_ADDRESS (ALIGN_VALUE (RootBridge->MemAbove4G.Base, Alignment + 1),
>> + RootBridge->MemAbove4G.Translation),
>> + TO_HOST_ADDRESS (RootBridge->MemAbove4G.Limit,
>> + RootBridge->MemAbove4G.Translation)
>> );
>> if (BaseAddress != MAX_UINT64) {
>> break;
>> @@ -853,8 +937,10 @@ NotifyPhase (
>> TRUE,
>> RootBridge->ResAllocNode[Index].Length,
>> MIN (31, BitsOfAlignment),
>> - ALIGN_VALUE (RootBridge->Mem.Base, Alignment + 1),
>> - RootBridge->Mem.Limit
>> + TO_HOST_ADDRESS (ALIGN_VALUE (RootBridge->Mem.Base, Alignment + 1),
>> + RootBridge->Mem.Translation),
>> + TO_HOST_ADDRESS (RootBridge->Mem.Limit,
>> + RootBridge->Mem.Translation)
>> );
>> break;
>>
>> @@ -863,8 +949,10 @@ NotifyPhase (
>> TRUE,
>> RootBridge->ResAllocNode[Index].Length,
>> MIN (63, BitsOfAlignment),
>> - ALIGN_VALUE (RootBridge->PMemAbove4G.Base, Alignment + 1),
>> - RootBridge->PMemAbove4G.Limit
>> + TO_HOST_ADDRESS (ALIGN_VALUE (RootBridge->PMemAbove4G.Base, Alignment + 1),
>> + RootBridge->PMemAbove4G.Translation),
>> + TO_HOST_ADDRESS (RootBridge->PMemAbove4G.Limit,
>> + RootBridge->PMemAbove4G.Translation)
>> );
>> if (BaseAddress != MAX_UINT64) {
>> break;
>> @@ -877,8 +965,10 @@ NotifyPhase (
>> TRUE,
>> RootBridge->ResAllocNode[Index].Length,
>> MIN (31, BitsOfAlignment),
>> - ALIGN_VALUE (RootBridge->PMem.Base, Alignment + 1),
>> - RootBridge->PMem.Limit
>> + TO_HOST_ADDRESS (ALIGN_VALUE (RootBridge->PMem.Base, Alignment + 1),
>> + RootBridge->PMem.Translation),
>> + TO_HOST_ADDRESS (RootBridge->PMem.Limit,
>> + RootBridge->PMem.Translation)
>> );
>> break;
>>
>> @@ -1421,7 +1511,14 @@ GetProposedResources (
>> Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
>> Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;;
>> Descriptor->GenFlag = 0;
>> - Descriptor->AddrRangeMin = RootBridge->ResAllocNode[Index].Base;
>> + //
>> + // AddrRangeMin in Resource Descriptor here should be device address
>> + // instead of host address, or else PCI bus driver cannot set correct
>> + // address into PCI BAR registers.
>> + // Base in ResAllocNode is a host address, so conversion is needed.
>> + //
>> + Descriptor->AddrRangeMin = TO_DEVICE_ADDRESS (RootBridge->ResAllocNode[Index].Base,
>> + GetTranslationByResourceType (RootBridge, Index));
>> Descriptor->AddrRangeMax = 0;
>> Descriptor->AddrTranslationOffset = (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : PCI_RESOURCE_LESS;
>> Descriptor->AddrLen = RootBridge->ResAllocNode[Index].Length;
>> diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
>> index dc06c16dc038..5dd9d257d46d 100644
>> --- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
>> +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
>> @@ -86,12 +86,35 @@ CreateRootBridge (
>> (Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM) != 0 ? L"CombineMemPMem " : L"",
>> (Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_MEM64_DECODE) != 0 ? L"Mem64Decode" : L""
>> ));
>> + //
>> + // Translation for bus is not supported.
>> + //
>> DEBUG ((EFI_D_INFO, " Bus: %lx - %lx\n", Bridge->Bus.Base, Bridge->Bus.Limit));
>> - DEBUG ((EFI_D_INFO, " Io: %lx - %lx\n", Bridge->Io.Base, Bridge->Io.Limit));
>> - DEBUG ((EFI_D_INFO, " Mem: %lx - %lx\n", Bridge->Mem.Base, Bridge->Mem.Limit));
>> - DEBUG ((EFI_D_INFO, " MemAbove4G: %lx - %lx\n", Bridge->MemAbove4G.Base, Bridge->MemAbove4G.Limit));
>> - DEBUG ((EFI_D_INFO, " PMem: %lx - %lx\n", Bridge->PMem.Base, Bridge->PMem.Limit));
>> - DEBUG ((EFI_D_INFO, " PMemAbove4G: %lx - %lx\n", Bridge->PMemAbove4G.Base, Bridge->PMemAbove4G.Limit));
>> + ASSERT (Bridge->Bus.Translation == 0);
>> + if (Bridge->Bus.Translation != 0) {
>> + return NULL;
>> + }
>> +
>> + DEBUG ((
>> + DEBUG_INFO, " Io: %lx - %lx Translation=%lx\n",
>> + Bridge->Io.Base, Bridge->Io.Limit, Bridge->Io.Translation
>> + ));
>> + DEBUG ((
>> + DEBUG_INFO, " Mem: %lx - %lx Translation=%lx\n",
>> + Bridge->Mem.Base, Bridge->Mem.Limit, Bridge->Mem.Translation
>> + ));
>> + DEBUG ((
>> + DEBUG_INFO, " MemAbove4G: %lx - %lx Translation=%lx\n",
>> + Bridge->MemAbove4G.Base, Bridge->MemAbove4G.Limit, Bridge->MemAbove4G.Translation
>> + ));
>> + DEBUG ((
>> + DEBUG_INFO, " PMem: %lx - %lx Translation=%lx\n",
>> + Bridge->PMem.Base, Bridge->PMem.Limit, Bridge->PMem.Translation
>> + ));
>> + DEBUG ((
>> + DEBUG_INFO, " PMemAbove4G: %lx - %lx Translation=%lx\n",
>> + Bridge->PMemAbove4G.Base, Bridge->PMemAbove4G.Limit, Bridge->PMemAbove4G.Translation
>> + ));
>>
>> //
>> // Make sure Mem and MemAbove4G apertures are valid
>> @@ -206,7 +229,12 @@ CreateRootBridge (
>> }
>> RootBridge->ResAllocNode[Index].Type = Index;
>> if (Bridge->ResourceAssigned && (Aperture->Limit >= Aperture->Base)) {
>> - RootBridge->ResAllocNode[Index].Base = Aperture->Base;
>> + //
>> + // Base in ResAllocNode is a host address, while Base in Aperture is a
>> + // device address.
>> + //
>> + RootBridge->ResAllocNode[Index].Base = TO_HOST_ADDRESS (Aperture->Base,
>> + Aperture->Translation);
>> RootBridge->ResAllocNode[Index].Length = Aperture->Limit - Aperture->Base + 1;
>> RootBridge->ResAllocNode[Index].Status = ResAllocated;
>> } else {
>> @@ -403,6 +431,28 @@ RootBridgeIoCheckParameter (
>> return EFI_SUCCESS;
>> }
>>
>> +EFI_STATUS
>> +RootBridgeIoGetMemTranslationByAddress (
>> + IN PCI_ROOT_BRIDGE_INSTANCE *RootBridge,
>> + IN UINT64 Address,
>> + IN OUT UINT64 *Translation
>> + )
>> +{
>> + if (Address >= RootBridge->Mem.Base && Address <= RootBridge->Mem.Limit) {
>> + *Translation = RootBridge->Mem.Translation;
>> + } else if (Address >= RootBridge->PMem.Base && Address <= RootBridge->PMem.Limit) {
>> + *Translation = RootBridge->PMem.Translation;
>> + } else if (Address >= RootBridge->MemAbove4G.Base && Address <= RootBridge->MemAbove4G.Limit) {
>> + *Translation = RootBridge->MemAbove4G.Translation;
>> + } else if (Address >= RootBridge->PMemAbove4G.Base && Address <= RootBridge->PMemAbove4G.Limit) {
>> + *Translation = RootBridge->PMemAbove4G.Translation;
>> + } else {
>> + return EFI_INVALID_PARAMETER;
>> + }
>> +
>> + return EFI_SUCCESS;
>> +}
>> +
>> /**
>> Polls an address in memory mapped I/O space until an exit condition is met,
>> or a timeout occurs.
>> @@ -658,13 +708,25 @@ RootBridgeIoMemRead (
>> )
>> {
>> EFI_STATUS Status;
>> + PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
>> + UINT64 Translation;
>>
>> Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address,
>> Count, Buffer);
>> if (EFI_ERROR (Status)) {
>> return Status;
>> }
>> - return mCpuIo->Mem.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
>> +
>> + RootBridge = ROOT_BRIDGE_FROM_THIS (This);
>> + Status = RootBridgeIoGetMemTranslationByAddress (RootBridge, Address, &Translation);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + // Address passed to CpuIo->Mem.Read needs to be a host address instead of
>> + // device address.
>> + return mCpuIo->Mem.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width,
>> + TO_HOST_ADDRESS (Address, Translation), Count, Buffer);
>> }
>>
>> /**
>> @@ -705,13 +767,25 @@ RootBridgeIoMemWrite (
>> )
>> {
>> EFI_STATUS Status;
>> + PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
>> + UINT64 Translation;
>>
>> Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address,
>> Count, Buffer);
>> if (EFI_ERROR (Status)) {
>> return Status;
>> }
>> - return mCpuIo->Mem.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
>> +
>> + RootBridge = ROOT_BRIDGE_FROM_THIS (This);
>> + Status = RootBridgeIoGetMemTranslationByAddress (RootBridge, Address, &Translation);
>> + if (EFI_ERROR (Status)) {
>> + return Status;
>> + }
>> +
>> + // Address passed to CpuIo->Mem.Write needs to be a host address instead of
>> + // device address.
>> + return mCpuIo->Mem.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width,
>> + TO_HOST_ADDRESS (Address, Translation), Count, Buffer);
>> }
>>
>> /**
>> @@ -746,6 +820,8 @@ RootBridgeIoIoRead (
>> )
>> {
>> EFI_STATUS Status;
>> + PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
>> +
>> Status = RootBridgeIoCheckParameter (
>> This, IoOperation, Width,
>> Address, Count, Buffer
>> @@ -753,7 +829,13 @@ RootBridgeIoIoRead (
>> if (EFI_ERROR (Status)) {
>> return Status;
>> }
>> - return mCpuIo->Io.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
>> +
>> + RootBridge = ROOT_BRIDGE_FROM_THIS (This);
>> +
>> + // Address passed to CpuIo->Io.Read needs to be a host address instead of
>> + // device address.
>> + return mCpuIo->Io.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width,
>> + TO_HOST_ADDRESS (Address, RootBridge->Io.Translation), Count, Buffer);
>> }
>>
>> /**
>> @@ -788,6 +870,8 @@ RootBridgeIoIoWrite (
>> )
>> {
>> EFI_STATUS Status;
>> + PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
>> +
>> Status = RootBridgeIoCheckParameter (
>> This, IoOperation, Width,
>> Address, Count, Buffer
>> @@ -795,7 +879,13 @@ RootBridgeIoIoWrite (
>> if (EFI_ERROR (Status)) {
>> return Status;
>> }
>> - return mCpuIo->Io.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
>> +
>> + RootBridge = ROOT_BRIDGE_FROM_THIS (This);
>> +
>> + // Address passed to CpuIo->Io.Write needs to be a host address instead of
>> + // device address.
>> + return mCpuIo->Io.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width,
>> + TO_HOST_ADDRESS (Address, RootBridge->Io.Translation), Count, Buffer);
>> }
>>
>> /**
>> @@ -1615,9 +1705,17 @@ RootBridgeIoConfiguration (
>>
>> Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
>> Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;
>> + // According to UEFI 2.7, RootBridgeIo->Configuration should return address
>> + // range in CPU view (host address), and ResAllocNode->Base is already a CPU
>> + // view address (host address).
>> Descriptor->AddrRangeMin = ResAllocNode->Base;
>> Descriptor->AddrRangeMax = ResAllocNode->Base + ResAllocNode->Length - 1;
>> Descriptor->AddrLen = ResAllocNode->Length;
>> + Descriptor->AddrTranslationOffset = GetTranslationByResourceType (
>> + RootBridge,
>> + ResAllocNode->Type
>> + );
>> +
>> switch (ResAllocNode->Type) {
>>
>> case TypeIo:
>> --
>> 2.7.4
>>
--
Thanks,
Ray
next prev parent reply other threads:[~2018-03-07 4:24 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 6:57 [PATCH v5 0/6] Add translation support to generic PciHostBridge Heyi Guo
2018-03-01 6:57 ` [PATCH v5 1/6] CorebootPayloadPkg/PciHostBridgeLib: Init PCI aperture to 0 Heyi Guo
2018-03-14 11:24 ` Ard Biesheuvel
2018-03-01 6:57 ` [PATCH v5 2/6] OvmfPkg/PciHostBridgeLib: " Heyi Guo
2018-03-01 10:17 ` Laszlo Ersek
2018-03-01 10:48 ` Guo Heyi
2018-03-02 10:19 ` Laszlo Ersek
2018-03-05 8:23 ` Guo Heyi
2018-03-01 10:20 ` Laszlo Ersek
2018-03-01 10:25 ` Guo Heyi
2018-03-01 12:03 ` Ni, Ruiyu
2018-03-02 10:08 ` Laszlo Ersek
2018-03-01 6:57 ` [PATCH v5 3/6] MdeModulePkg/PciHostBridgeLib.h: add address Translation Heyi Guo
2018-03-01 6:57 ` [PATCH v5 4/6] MdeModulePkg/PciHostBridgeDxe: Add support for address translation Heyi Guo
2018-03-06 2:44 ` Guo Heyi
2018-03-07 4:30 ` Ni, Ruiyu [this message]
2018-03-07 6:01 ` Guo Heyi
2018-03-14 7:57 ` Ni, Ruiyu
2018-03-14 11:25 ` Ard Biesheuvel
2018-03-15 2:57 ` Guo Heyi
2018-03-15 3:25 ` Ni, Ruiyu
2018-03-12 17:18 ` Ard Biesheuvel
2018-03-13 3:00 ` Ni, Ruiyu
2018-03-13 7:31 ` Guo Heyi
2018-03-13 8:04 ` Ard Biesheuvel
2018-03-01 6:57 ` [PATCH v5 5/6] MdeModulePkg/PciBus: convert host address to device address Heyi Guo
2018-03-01 6:57 ` [PATCH v5 6/6] MdeModulePkg/PciBus: return CPU address for GetBarAttributes Heyi Guo
2018-03-01 8:28 ` [PATCH v5 0/6] Add translation support to generic PciHostBridge Ard Biesheuvel
2018-03-15 1:07 ` Ni, Ruiyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71a21699-a1b3-155a-e743-ee5e6288ce20@Intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox