From: "Ni, Ruiyu" <ruiyu.ni@intel.com>
To: Leo Duran <leo.duran@amd.com>,
"edk2-devel@ml01.01.org" <edk2-devel@ml01.01.org>
Cc: "Tian, Feng" <feng.tian@intel.com>, "Zeng, Star" <star.zeng@intel.com>
Subject: Re: [PATCH v3 1/6] MdeModulePkg: Add DxeBmDmaLib (BmDmaLib class) library
Date: Wed, 1 Mar 2017 02:39:09 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5B8BB133@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1486658427-6551-2-git-send-email-leo.duran@amd.com>
I suggest to align to BS->FreePages() prototype. Other parts of this patch are good to me.
BmDmaFreeBuffer (,
IN VOID *HostAddress
IN UINTN Pages
Thanks/Ray
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Leo Duran
> Sent: Friday, February 10, 2017 12:40 AM
> To: edk2-devel@ml01.01.org
> Cc: Tian, Feng <feng.tian@intel.com>; Leo Duran <leo.duran@amd.com>;
> Zeng, Star <star.zeng@intel.com>
> Subject: [edk2] [PATCH v3 1/6] MdeModulePkg: Add DxeBmDmaLib
> (BmDmaLib class) library
>
> This patch provides an abstraction layer for Bus-master DMA operations as
> currently implemented by the PciHostBridgeDxe driver. The intent is to then
> allow override of this library as may be required by specific hardware
> implementations, such as AMD's Secure Encrypted Virtualization (SEV).
>
> This new BmDmaLib class library is cloned from the existing DmaLib with an
> additional DmaAbove4GB (BOOLEAN) parameter for the Map and Allocate
> interfaces, so that decisions can be made about the need to allocate DMA
> buffers below the 4GB boundary.
>
> Cc: Feng Tian <feng.tian@intel.com>
> Cc: Star Zeng <star.zeng@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Leo Duran <leo.duran@amd.com>
> ---
> MdeModulePkg/Include/Library/BmDmaLib.h | 161 +++++++++++
> MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.c | 351
> +++++++++++++++++++++++
> MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf | 41 +++
> MdeModulePkg/MdeModulePkg.dsc | 1 +
> 4 files changed, 554 insertions(+)
> create mode 100644 MdeModulePkg/Include/Library/BmDmaLib.h
> create mode 100644
> MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.c
> create mode 100644
> MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf
>
> diff --git a/MdeModulePkg/Include/Library/BmDmaLib.h
> b/MdeModulePkg/Include/Library/BmDmaLib.h
> new file mode 100644
> index 0000000..2c0e50f
> --- /dev/null
> +++ b/MdeModulePkg/Include/Library/BmDmaLib.h
> @@ -0,0 +1,161 @@
> +/** @file
> + DMA abstraction library APIs. Based on PCI IO protocol DMA abstractions.
> +
> + Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> + Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +
> + DMA Bus Master Read Operation:
> + Call BmDmaMap() for DmaOperationBusMasterRead.
> + Program the DMA Bus Master with the DeviceAddress returned by
> BmDmaMap().
> + Start the DMA Bus Master.
> + Wait for DMA Bus Master to complete the read operation.
> + Call BmDmaUnmap().
> +
> + DMA Bus Master Write Operation:
> + Call BmDmaMap() for DmaOperationBusMasterWrite.
> + Program the DMA Bus Master with the DeviceAddress returned by
> BmDmaMap().
> + Start the DMA Bus Master.
> + Wait for DMA Bus Master to complete the write operation.
> + Call BmDmaUnmap().
> +
> + DMA Bus Master Common Buffer Operation:
> + Call BmDmaAllocateBuffer() to allocate a common buffer.
> + Call BmDmaMap() for DmaOperationBusMasterCommonBuffer.
> + Program the DMA Bus Master with the DeviceAddress returned by
> BmDmaMap().
> + The common buffer can now be accessed equally by the processor and
> the DMA bus master.
> + Call BmDmaUnmap().
> + Call BmDmaFreeBuffer().
> +
> + This program and the accompanying materials are licensed and made
> + available under the terms and conditions of the BSD License which
> + accompanies this distribution. The full text of the license may be
> + found at http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> + Derived from:
> + EmbeddedPkg/Include/Library/DmaLib.h
> +
> +**/
> +
> +#ifndef __BM_DMA_LIB_H__
> +#define __BM_DMA_LIB_H__
> +
> +
> +typedef enum {
> + ///
> + /// A read operation from system memory by a bus master.
> + ///
> + DmaOperationBusMasterRead,
> + ///
> + /// A write operation from system memory by a bus master.
> + ///
> + DmaOperationBusMasterWrite,
> + ///
> + /// Provides both read and write access to system memory by both the
> +processor and a
> + /// bus master. The buffer is coherent from both the processor's and the
> bus master's point of view.
> + ///
> + DmaOperationBusMasterCommonBuffer,
> + DmaOperationBusMasterMaximum
> +} BM_DMA_OPERATION;
> +
> +
> +/**
> + Provides the DMA controller-specific addresses needed to access system
> memory.
> +
> + Operation is relative to the DMA bus master.
> +
> + @param DmaAbove4GB Indicates capability of DMA operations
> above 4GB.
> + @param Operation Indicates if the bus master is going to read or
> write to system memory.
> + @param HostAddress The system memory address to map to the
> DMA controller.
> + @param NumberOfBytes On input the number of bytes to map. On
> output the number of bytes
> + that were mapped.
> + @param DeviceAddress The resulting map address for the bus master
> controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to BmDmaUnmap().
> +
> + @retval EFI_SUCCESS The range was mapped for the returned
> NumberOfBytes.
> + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
> common buffer.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The request could not be completed
> due to a lack of resources.
> + @retval EFI_DEVICE_ERROR The system hardware could not map the
> requested address.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaMap (
> + IN BOOLEAN DmaAbove4GB,
> + IN BM_DMA_OPERATION Operation,
> + IN VOID *HostAddress,
> + IN OUT UINTN *NumberOfBytes,
> + OUT PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + );
> +
> +
> +/**
> + Completes the DmaOperationBusMasterRead/Write/CommonBuffer
> operation
> + and releases any corresponding resources.
> +
> + @param Mapping The mapping value returned from BmDmaMap().
> +
> + @retval EFI_SUCCESS The range was unmapped.
> + @retval EFI_DEVICE_ERROR The data was not committed to the target
> system memory.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaUnmap (
> + IN VOID *Mapping
> + );
> +
> +
> +/**
> + Allocates pages that are suitable for a BmDmaMap() of type
> DmaOperationBusMasterCommonBuffer.
> +
> + @param DmaAbove4GB Indicates capability of DMA operations
> above 4GB.
> + @param MemoryType The type of memory to allocate:
> EfiBootServicesData or
> + EfiRuntimeServicesData.
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system memory
> address of the
> + allocated range.
> +
> + @retval EFI_SUCCESS The requested memory pages were allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaAllocateBuffer (
> + IN BOOLEAN DmaAbove4GB,
> + IN EFI_MEMORY_TYPE MemoryType,
> + IN UINTN Pages,
> + OUT VOID **HostAddress
> + );
> +
> +
> +/**
> + Frees memory that was allocated with BmDmaAllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> +
> + @retval EFI_SUCCESS The requested memory pages were freed.
> + @retval EFI_INVALID_PARAMETER The memory range specified by
> HostAddress and Pages
> + was not allocated with BmDmaAllocateBuffer().
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress
> + );
> +
> +
> +#endif
> +
> diff --git a/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.c
> b/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.c
> new file mode 100644
> index 0000000..824b51f
> --- /dev/null
> +++ b/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.c
> @@ -0,0 +1,351 @@
> +/** @file
> + DMA abstraction library APIs. Based on PCI IO protocol DMA abstractions.
> +
> + Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
> + Copyright (c) 2017, AMD Inc. All rights reserved.<BR>
> +
> + This program and the accompanying materials are licensed and made
> + available under the terms and conditions of the BSD License which
> + accompanies this distribution. The full text of the license may be
> + found at http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> + Derived from:
> + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
> +
> +**/
> +
> +#include <PiDxe.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DxeServicesTableLib.h> #include
> +<Library/MemoryAllocationLib.h> #include
> +<Library/UefiBootServicesTableLib.h>
> +#include <Library/BmDmaLib.h>
> +
> +
> +#define FORCE_BELOW_4GB_TRUE TRUE
> +#define FORCE_BELOW_4GB_FALSE FALSE
> +#define NO_MAPPING (VOID *) (UINTN) -1
> +
> +
> +typedef struct {
> + BM_DMA_OPERATION Operation;
> + UINTN NumberOfBytes;
> + UINTN NumberOfPages;
> + EFI_PHYSICAL_ADDRESS HostAddress;
> + EFI_PHYSICAL_ADDRESS MappedHostAddress; } MAP_INFO;
> +
> +
> +EFI_STATUS
> +AllocateBounceBuffer (
> + IN BOOLEAN ForceBelow4GB,
> + IN BM_DMA_OPERATION Operation,
> + IN EFI_PHYSICAL_ADDRESS HostAddress,
> + IN OUT UINTN *NumberOfBytes,
> + OUT PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_STATUS Status;
> + MAP_INFO *MapInfo;
> + EFI_ALLOCATE_TYPE AllocateType;
> +
> + //
> + // Allocate a MAP_INFO structure to remember the mapping when
> Unmap()
> + is // called later.
> + //
> + MapInfo = AllocatePool (sizeof (MAP_INFO)); if (MapInfo == NULL) {
> + *NumberOfBytes = 0;
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + //
> + // Initialize the MAP_INFO structure
> + //
> + MapInfo->Operation = Operation;
> + MapInfo->NumberOfBytes = *NumberOfBytes; MapInfo-
> >NumberOfPages =
> + EFI_SIZE_TO_PAGES (MapInfo->NumberOfBytes);
> + MapInfo->HostAddress = HostAddress;
> +
> + if (ForceBelow4GB) {
> + //
> + // Limit allocations to memory below 4GB
> + //
> + AllocateType = AllocateMaxAddress;
> + MapInfo->MappedHostAddress = SIZE_4GB - 1; } else {
> + AllocateType = AllocateAnyPages;
> + }
> +
> + //
> + // Allocate DMA bounce buffer
> + //
> + Status = gBS->AllocatePages (
> + AllocateType,
> + EfiBootServicesData,
> + MapInfo->NumberOfPages,
> + &MapInfo->MappedHostAddress
> + );
> +
> + if (EFI_ERROR (Status)) {
> + FreePool (MapInfo);
> + *NumberOfBytes = 0;
> + return Status;
> + }
> +
> + //
> + // If this is a read operation from the Bus Master's point of view,
> + // then copy the contents of the real buffer into the mapped buffer
> + // so the Bus Master can read the contents of the real buffer.
> + //
> + if (Operation == DmaOperationBusMasterRead) {
> + CopyMem (
> + (VOID *) (UINTN) MapInfo->MappedHostAddress,
> + (VOID *) (UINTN) MapInfo->HostAddress,
> + MapInfo->NumberOfBytes
> + );
> + }
> +
> + //
> + // The DeviceAddress is the address of the mapped buffer //
> + *DeviceAddress = MapInfo->MappedHostAddress;
> +
> + //
> + // Return a pointer to the MAP_INFO structure in Mapping //
> + *Mapping = MapInfo;
> +
> + return EFI_SUCCESS;
> +}
> +
> +
> +/**
> + Provides the DMA controller-specific addresses needed to access system
> memory.
> +
> + Operation is relative to the DMA bus master.
> +
> + @param DmaAbove4GB Indicates capability of DMA operations
> above 4GB.
> + @param Operation Indicates if the bus master is going to read or
> write to system memory.
> + @param HostAddress The system memory address to map to the
> DMA controller.
> + @param NumberOfBytes On input the number of bytes to map. On
> output the number of bytes
> + that were mapped.
> + @param DeviceAddress The resulting map address for the bus master
> controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to BmDmaUnmap().
> +
> + @retval EFI_SUCCESS The range was mapped for the returned
> NumberOfBytes.
> + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
> common buffer.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The request could not be completed
> due to a lack of resources.
> + @retval EFI_DEVICE_ERROR The system hardware could not map the
> requested address.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaMap (
> + IN BOOLEAN DmaAbove4GB,
> + IN BM_DMA_OPERATION Operation,
> + IN VOID *HostAddress,
> + IN OUT UINTN *NumberOfBytes,
> + OUT PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_PHYSICAL_ADDRESS PhysicalAddress;
> +
> + //
> + // Check for invalid inputs
> + //
> + if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress ==
> NULL ||
> + Mapping == NULL || (UINT32) Operation >=
> DmaOperationBusMasterMaximum) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress; if
> + (DmaAbove4GB || (PhysicalAddress + *NumberOfBytes) <= SIZE_4GB) {
> + //
> + // If we CAN handle DMA above 4GB or the transfer is below 4GB,
> + // the DeviceAddress is simply the HostAddress
> + //
> + *DeviceAddress = PhysicalAddress;
> + *Mapping = NO_MAPPING;
> +
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // If we cannot handle DMA above 4GB and any part of the DMA transfer
> + // being is above 4GB, then map the DMA transfer to a buffer below 4GB.
> + //
> + if (Operation == DmaOperationBusMasterCommonBuffer) {
> + //
> + // Common Buffer operations cannot be remapped, so return an error.
> + //
> + return EFI_UNSUPPORTED;
> + }
> +
> + return AllocateBounceBuffer (
> + Operation,
> + FORCE_BELOW_4GB_TRUE,
> + PhysicalAddress,
> + NumberOfBytes,
> + DeviceAddress,
> + Mapping
> + );
> +}
> +
> +
> +/**
> + Completes the DmaOperationBusMasterRead/Write/CommonBuffer
> operation
> + and releases any corresponding resources.
> +
> + @param Mapping The mapping value returned from BmDmaMap().
> +
> + @retval EFI_SUCCESS The range was unmapped.
> + @retval EFI_DEVICE_ERROR The data was not committed to the target
> system memory.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaUnmap (
> + IN VOID *Mapping
> + )
> +{
> + MAP_INFO *MapInfo;
> +
> + //
> + // Check for invalid inputs
> + //
> + if (Mapping == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // See if the Map() operation associated with this Unmap() required a
> + mapping // buffer. If a mapping buffer was not required, then this
> + function simply // returns EFI_SUCCESS.
> + //
> + if (Mapping == NO_MAPPING) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // If this is a write operation from the Bus Master's point of view,
> + // then copy the contents of the mapped buffer into the real buffer
> + // so the processor can read the contents of the real buffer.
> + //
> + MapInfo = (MAP_INFO *)Mapping;
> + if (MapInfo->Operation == DmaOperationBusMasterWrite) {
> + CopyMem (
> + (VOID *) (UINTN) MapInfo->HostAddress,
> + (VOID *) (UINTN) MapInfo->MappedHostAddress,
> + MapInfo->NumberOfBytes
> + );
> + }
> +
> + //
> + // Free the mapped buffer and the MAP_INFO structure.
> + //
> + gBS->FreePages (MapInfo->MappedHostAddress, MapInfo-
> >NumberOfPages);
> + FreePool (Mapping);
> + return EFI_SUCCESS;
> +}
> +
> +
> +/**
> + Allocates pages that are suitable for a BmDmaMap() of type
> DmaOperationBusMasterCommonBuffer.
> +
> + @param DmaAbove4GB Indicates capability of DMA operations
> above 4GB.
> + @param MemoryType The type of memory to allocate:
> EfiBootServicesData or
> + EfiRuntimeServicesData.
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system memory
> address of the
> + allocated range.
> +
> + @retval EFI_SUCCESS The requested memory pages were allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaAllocateBuffer (
> + IN BOOLEAN DmaAbove4GB,
> + IN EFI_MEMORY_TYPE MemoryType,
> + IN UINTN Pages,
> + OUT VOID **HostAddress
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS PhysicalAddress;
> + EFI_ALLOCATE_TYPE AllocateType;
> +
> + //
> + // Check for invalid inputs
> + //
> + if (HostAddress == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // The only valid memory types are EfiBootServicesData and //
> + EfiRuntimeServicesData // if (MemoryType != EfiBootServicesData &&
> + MemoryType != EfiRuntimeServicesData) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (DmaAbove4GB) {
> + AllocateType = AllocateAnyPages;
> + } else {
> + //
> + // Limit allocations to memory below 4GB
> + //
> + AllocateType = AllocateMaxAddress;
> + PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (SIZE_4GB - 1); } Status
> + = gBS->AllocatePages (
> + AllocateType,
> + MemoryType,
> + Pages,
> + &PhysicalAddress
> + );
> + if (!EFI_ERROR (Status)) {
> + *HostAddress = (VOID *) (UINTN) PhysicalAddress; }
> +
> + return Status;
> +}
> +
> +
> +/**
> + Frees memory that was allocated with BmDmaAllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> +
> + @retval EFI_SUCCESS The requested memory pages were freed.
> + @retval EFI_INVALID_PARAMETER The memory range specified by
> HostAddress and Pages
> + was not allocated with BmDmaAllocateBuffer().
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +BmDmaFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress
> + )
> +{
> + return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress,
> +Pages); }
> +
> diff --git a/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf
> b/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf
> new file mode 100644
> index 0000000..4ddb27d
> --- /dev/null
> +++ b/MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf
> @@ -0,0 +1,41 @@
> +## @file
> +#
> +# DMA abstraction library APIs. Based on PCI IO protocol DMA abstractions.
> +#
> +# Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> #
> +Copyright (c) 2017, AMD Inc. All rights reserved.<BR> # # This program
> +and the accompanying materials # are licensed and made available under
> +the terms and conditions of the BSD License # which accompanies this
> +distribution. The full text of the license may be found at #
> +http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> +BASIS, # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND,
> EITHER EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = DxeBmDmaLib
> + FILE_GUID = daa403e0-071d-44ef-95cf-7f2472e4a4d5
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = BmDmaLib|DXE_DRIVER
> +
> +[Sources.common]
> + DxeBmDmaLib.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + DebugLib
> + DxeServicesTableLib
> + MemoryAllocationLib
> + UefiBootServicesTableLib
> +
> +
> diff --git a/MdeModulePkg/MdeModulePkg.dsc
> b/MdeModulePkg/MdeModulePkg.dsc index 5996fe5..311922e 100644
> --- a/MdeModulePkg/MdeModulePkg.dsc
> +++ b/MdeModulePkg/MdeModulePkg.dsc
> @@ -275,6 +275,7 @@ [Components]
> MdeModulePkg/Core/Pei/PeiMain.inf
> MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
>
> + MdeModulePkg/Library/DxeBmDmaLib/DxeBmDmaLib.inf
> MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
>
> MdeModulePkg/Library/UefiMemoryAllocationProfileLib/UefiMemoryAlloca
> tionProfileLib.inf
>
> MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllo
> cationLib.inf
> --
> 1.9.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2017-03-01 2:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-09 16:40 [PATCH v3 0/6] DxeBmDmaLib (BmDmaLib class) library Leo Duran
2017-02-09 16:40 ` [PATCH v3 1/6] MdeModulePkg: Add " Leo Duran
2017-03-01 2:39 ` Ni, Ruiyu [this message]
2017-03-01 2:48 ` Tian, Feng
2017-03-01 2:54 ` Ni, Ruiyu
2017-02-09 16:40 ` [PATCH v3 2/6] ArmVirtPkg: Resolve BmDmaLib class for PciHostBridgeDxe driver Leo Duran
2017-02-09 17:56 ` Ard Biesheuvel
2017-02-09 19:33 ` Laszlo Ersek
2017-02-09 20:15 ` Ard Biesheuvel
2017-02-09 16:40 ` [PATCH v3 3/6] CorebootPayloadPkg: " Leo Duran
2017-02-09 16:40 ` [PATCH v3 4/6] MdeModulePkg: " Leo Duran
2017-02-09 16:40 ` [PATCH v3 5/6] OvmfPkg: " Leo Duran
2017-02-09 16:40 ` [PATCH v3 6/6] MdeModulePkg: Modify PciHostBridgeDxe to use new BmDmaLib class library Leo Duran
2017-03-01 2:53 ` Ni, Ruiyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5B8BB133@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox