public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Ni, Ruiyu" <ruiyu.ni@intel.com>
To: "Wang, Sunny (HPS SW)" <sunnywang@hpe.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Tian, Feng" <feng.tian@intel.com>,
	"Haskell, Darrell" <darrell.haskell@hpe.com>
Subject: Re: [PATCH] MdeModulePkg/UefiBootManagerLib: Generate boot description for NVME
Date: Mon, 13 Mar 2017 02:24:23 +0000	[thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5B8C88CB@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <CS1PR84MB029502C0B7D9665F32815525A8200@CS1PR84MB0295.NAMPRD84.PROD.OUTLOOK.COM>

I didn't find this library in EDKII.
When I firstly saw your comments, I was a little bit unwilling to change
UefiBootManagerLib to depend on UefiNvmExpressLib. Because it would
require all platforms to include UefiNvmExpressLib in DSC.
But since now I find no such library, I feel much better😊

Thanks/Ray

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Wang, Sunny (HPS SW)
> Sent: Friday, March 10, 2017 6:11 PM
> To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
> Cc: Tian, Feng <feng.tian@intel.com>; Haskell, Darrell
> <darrell.haskell@hpe.com>
> Subject: Re: [edk2] [PATCH] MdeModulePkg/UefiBootManagerLib:
> Generate boot description for NVME
> 
> Hi Ray,
> Just a question out of curiosity. Why don't we use UefiNvmExpressLib's
> NvmExpressIdentify() for sending ADMIN_IDENTIFY command to NVME
> controller?
> Others look good to me.
> 
> Regards,
> Sunny Wang
> 
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Ruiyu Ni
> Sent: Friday, March 10, 2017 3:58 PM
> To: edk2-devel@lists.01.org
> Cc: Feng Tian <feng.tian@intel.com>
> Subject: [edk2] [PATCH] MdeModulePkg/UefiBootManagerLib: Generate
> boot description for NVME
> 
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Feng Tian <feng.tian@intel.com>
> ---
>  .../Library/UefiBootManagerLib/BmBootDescription.c | 104
> ++++++++++++++++++++-
>  .../Library/UefiBootManagerLib/InternalBm.h        |   4 +-
>  .../UefiBootManagerLib/UefiBootManagerLib.inf      |   1 +
>  3 files changed, 107 insertions(+), 2 deletions(-)
> 
> diff --git
> a/MdeModulePkg/Library/UefiBootManagerLib/BmBootDescription.c
> b/MdeModulePkg/Library/UefiBootManagerLib/BmBootDescription.c
> index 050647d..501a0cc 100644
> --- a/MdeModulePkg/Library/UefiBootManagerLib/BmBootDescription.c
> +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmBootDescription.c
> @@ -1,7 +1,7 @@
>  /** @file
>    Library functions which relate with boot option description.
> 
> -Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
>  (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>  This
> program and the accompanying materials  are licensed and made available
> under the terms and conditions of the BSD License @@ -501,6 +501,107 @@
> BmGetLoadFileDescription (  }
> 
>  /**
> +  Return the boot description for NVME boot device.
> +
> +  @param Handle                Controller handle.
> +
> +  @return  The description string.
> +**/
> +CHAR16 *
> +BmGetNvmeDescription (
> +  IN EFI_HANDLE                      Handle
> +  )
> +{
> +  EFI_STATUS                               Status;
> +  EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL       *NvmePassthru;
> +  EFI_DEV_PATH_PTR                         DevicePath;
> +  EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> +  EFI_NVM_EXPRESS_COMMAND                  Command;
> +  EFI_NVM_EXPRESS_COMPLETION               Completion;
> +  NVME_ADMIN_CONTROLLER_DATA               ControllerData;
> +  CHAR16                                   *Description;
> +  CHAR16                                   *Char;
> +  UINTN                                    Index;
> +
> +  Status = gBS->HandleProtocol (Handle, &gEfiDevicePathProtocolGuid,
> + (VOID **) &DevicePath.DevPath);  if (EFI_ERROR (Status)) {
> +    return NULL;
> +  }
> +
> +  Status = gBS->LocateDevicePath (&gEfiNvmExpressPassThruProtocolGuid,
> + &DevicePath.DevPath, &Handle);  if (EFI_ERROR (Status) ||
> +      (DevicePathType (DevicePath.DevPath) != MESSAGING_DEVICE_PATH)
> ||
> +      (DevicePathSubType (DevicePath.DevPath) !=
> MSG_NVME_NAMESPACE_DP)) {
> +    //
> +    // Do not return description when the Handle is not a child of NVME
> controller.
> +    //
> +    return NULL;
> +  }
> +
> +  //
> +  // Send ADMIN_IDENTIFY command to NVME controller to get the model
> and serial number.
> +  //
> +  Status = gBS->HandleProtocol (Handle,
> + &gEfiNvmExpressPassThruProtocolGuid, (VOID **) &NvmePassthru);
> + ASSERT_EFI_ERROR (Status);
> +
> +  ZeroMem (&CommandPacket,
> + sizeof(EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> +  ZeroMem (&Command, sizeof(EFI_NVM_EXPRESS_COMMAND));
> ZeroMem
> + (&Completion, sizeof(EFI_NVM_EXPRESS_COMPLETION));
> +
> +  Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_CMD;  //  //
> According to
> + Nvm Express 1.1 spec Figure 38, When not used, the field shall be cleared
> to 0h.
> +  // For the Identify command, the Namespace Identifier is only used for the
> Namespace data structure.
> +  //
> +  Command.Nsid        = 0;
> +  CommandPacket.NvmeCmd        = &Command;
> +  CommandPacket.NvmeCompletion = &Completion;
> + CommandPacket.TransferBuffer = &ControllerData;
> + CommandPacket.TransferLength = sizeof (ControllerData);
> + CommandPacket.CommandTimeout = EFI_TIMER_PERIOD_SECONDS (5);
> +  CommandPacket.QueueType      = NVME_ADMIN_QUEUE;
> +  //
> +  // Set bit 0 (Cns bit) to 1 to identify a controller  //
> +  Command.Cdw10                = 1;
> +  Command.Flags                = CDW10_VALID;
> +
> +  Status = NvmePassthru->PassThru (
> +                               NvmePassthru,
> +                               0,
> +                               &CommandPacket,
> +                               NULL
> +                               );
> +  if (EFI_ERROR (Status)) {
> +    return NULL;
> +  }
> +
> +  Description = AllocateZeroPool (
> +                  (ARRAY_SIZE (ControllerData.Mn) + 1
> +                   + ARRAY_SIZE (ControllerData.Sn) + 1
> +                   + MAXIMUM_VALUE_CHARACTERS + 1
> +                   ) * sizeof (CHAR16));  if (Description != NULL) {
> +    Char = Description;
> +    for (Index = 0; Index < ARRAY_SIZE (ControllerData.Mn); Index++) {
> +      *(Char++) = (CHAR16) ControllerData.Mn[Index];
> +    }
> +    *(Char++) = L' ';
> +    for (Index = 0; Index < ARRAY_SIZE (ControllerData.Sn); Index++) {
> +      *(Char++) = (CHAR16) ControllerData.Sn[Index];
> +    }
> +    *(Char++) = L' ';
> +    UnicodeValueToStringS (
> +      Char, sizeof (CHAR16) * (MAXIMUM_VALUE_CHARACTERS + 1),
> +      0, DevicePath.NvmeNamespace->NamespaceId, 0
> +      );
> +    BmEliminateExtraSpaces (Description);  }
> +
> +  return Description;
> +}
> +
> +/**
>    Return the boot description for the controller based on the type.
> 
>    @param Handle                Controller handle.
> @@ -606,6 +707,7 @@ BM_GET_BOOT_DESCRIPTION
> mBmBootDescriptionHandlers[] = {
>    BmGetDescriptionFromDiskInfo,
>    BmGetNetworkDescription,
>    BmGetLoadFileDescription,
> +  BmGetNvmeDescription,
>    BmGetMiscDescription
>  };
> 
> diff --git a/MdeModulePkg/Library/UefiBootManagerLib/InternalBm.h
> b/MdeModulePkg/Library/UefiBootManagerLib/InternalBm.h
> index 444d4a5..8d7215a 100644
> --- a/MdeModulePkg/Library/UefiBootManagerLib/InternalBm.h
> +++ b/MdeModulePkg/Library/UefiBootManagerLib/InternalBm.h
> @@ -1,7 +1,7 @@
>  /** @file
>    BDS library definition, include the file and data structure
> 
> -Copyright (c) 2004 - 2016, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
>  (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>  This
> program and the accompanying materials  are licensed and made available
> under the terms and conditions of the BSD License @@ -22,6 +22,7 @@
> WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
>  #include <IndustryStandard/PeImage.h>
>  #include <IndustryStandard/Atapi.h>
>  #include <IndustryStandard/Scsi.h>
> +#include <IndustryStandard/Nvme.h>
> 
>  #include <Protocol/PciRootBridgeIo.h>
>  #include <Protocol/BlockIo.h>
> @@ -38,6 +39,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY
> KIND, EITHER EXPRESS OR IMPLIED.
>  #include <Protocol/GraphicsOutput.h>
>  #include <Protocol/UsbIo.h>
>  #include <Protocol/DiskInfo.h>
> +#include <Protocol/NvmExpressPassthru.h>
>  #include <Protocol/IdeControllerInit.h>  #include <Protocol/BootLogo.h>
> #include <Protocol/DriverHealth.h> diff --git
> a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
> b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
> index 6442f22..264d726 100644
> --- a/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
> +++
> b/MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
> @@ -109,6 +109,7 @@ [Protocols]
>    gEdkiiVariableLockProtocolGuid                ## SOMETIMES_CONSUMES
>    gEfiGraphicsOutputProtocolGuid                ## SOMETIMES_CONSUMES
>    gEfiUsbIoProtocolGuid                         ## SOMETIMES_CONSUMES
> +  gEfiNvmExpressPassThruProtocolGuid            ## SOMETIMES_CONSUMES
>    gEfiDiskInfoProtocolGuid                      ## SOMETIMES_CONSUMES
>    gEfiDriverHealthProtocolGuid                  ## SOMETIMES_CONSUMES
>    gEfiFormBrowser2ProtocolGuid                  ## SOMETIMES_CONSUMES
> --
> 2.9.0.windows.1
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel

  reply	other threads:[~2017-03-13  2:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-10  7:57 [PATCH] MdeModulePkg/UefiBootManagerLib: Generate boot description for NVME Ruiyu Ni
2017-03-10 10:11 ` Wang, Sunny (HPS SW)
2017-03-13  2:24   ` Ni, Ruiyu [this message]
2017-03-13  2:31     ` Tian, Feng
2017-03-13  2:32     ` Wang, Sunny (HPS SW)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=734D49CCEBEEF84792F5B80ED585239D5B8C88CB@SHSMSX104.ccr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox