From: "Ni, Ruiyu" <ruiyu.ni@intel.com>
To: "Shah, Tapan" <tapandshah@hpe.com>,
"Carsey, Jaben" <jaben.carsey@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
Date: Sun, 4 Jun 2017 00:47:43 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5B9862D6@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <CS1PR84MB00240C10141F469157CE08B4D4F70@CS1PR84MB0024.NAMPRD84.PROD.OUTLOOK.COM>
It's the original behavior of alias, not changed by this fix.
If you think it's a bug, could you please submit a Bugzilla to record it?
Regards,
Ray
>-----Original Message-----
>From: Shah, Tapan [mailto:tapandshah@hpe.com]
>Sent: Saturday, June 3, 2017 12:13 AM
>To: Carsey, Jaben <jaben.carsey@intel.com>; Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
>Cc: Kinney, Michael D <michael.d.kinney@intel.com>
>Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
>
>When attempting to delete an alias that does not exist, it does not return an error in lasterror status indiciating alias was
>not found.
>
>-----Original Message-----
>From: Carsey, Jaben [mailto:jaben.carsey@intel.com]
>Sent: Friday, June 02, 2017 10:04 AM
>To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
>Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan <tapandshah@hpe.com>
>Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
>
>Ok. I see now. Thanks!
>
>Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
>
>> -----Original Message-----
>> From: Ni, Ruiyu
>> Sent: Thursday, June 01, 2017 7:32 PM
>> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
>> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
>> (tapandshah@hpe.com) <tapandshah@hpe.com>
>> Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case
>> alias
>> Importance: High
>>
>> Jaben,
>> Old code also honors the returning status when delete an alias.
>> Please check the line I marked as "<----------" in below.
>>
>> //
>> // We must be trying to remove one if Alias is NULL
>> //
>> if (Alias == NULL) {
>> //
>> // remove an alias (but passed in COMMAND parameter)
>> //
>> Status = (gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0,
>> 0, NULL)); // <------------------
>> } else {
>> //
>> // Add and replace are the same
>> //
>>
>> // We dont check the error return on purpose since the variable
>> may not exist.
>> gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0, 0, NULL);
>>
>> Status = (gRT->SetVariable((CHAR16*)Alias, &gShellAliasGuid,
>> EFI_VARIABLE_BOOTSERVICE_ACCESS|(Volatile?0:EFI_VARIABLE_NON_VOL
>> ATILE), StrSize(Command), (VOID*)Command));
>> }
>>
>> Regards,
>> Ray
>>
>> >-----Original Message-----
>> >From: Carsey, Jaben
>> >Sent: Thursday, June 1, 2017 11:42 PM
>> >To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
>> >Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
>> (tapandshah@hpe.com) <tapandshah@hpe.com>
>> >Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case
>> >alias
>> >
>> >I think we have to leave the behavior the same. The spec says this:
>> >" If the
>> environment variable does not exist and the
>> >Value is an empty string, there is no action."
>> >
>> >I do not think we can change that to an error return without a spec change.
>> >
>> >-Jaben
>> >
>> >> -----Original Message-----
>> >> From: Carsey, Jaben
>> >> Sent: Thursday, June 01, 2017 8:40 AM
>> >> To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
>> >> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
>> >> (tapandshah@hpe.com) <tapandshah@hpe.com>
>> >> Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case
>> >> alias
>> >>
>> >> I just think we may want to have the behavior act the same as it
>> >> does
>> today
>> >> for delete.
>> >>
>> >> > -----Original Message-----
>> >> > From: Ni, Ruiyu
>> >> > Sent: Thursday, June 01, 2017 8:19 AM
>> >> > To: Carsey, Jaben <jaben.carsey@intel.com>;
>> >> > edk2-devel@lists.01.org
>> >> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
>> >> > (tapandshah@hpe.com) <tapandshah@hpe.com>
>> >> > Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support
>> >> > upper-case alias
>> >> > Importance: High
>> >> >
>> >> > I was using AliasLower.
>> >> > I am not sure whether the change is smallest. But I tried best to
>> >> > make
>> the
>> >> > new implementation cleaner. I think that's what we really need.
>> >> >
>> >> > Did you see any issue if we return EFI_NOT_FOUND (when variable
>> doesn't
>> >> > exist)?
>> >> >
>> >> > Regards,
>> >> > Ray
>> >> >
>> >> > >-----Original Message-----
>> >> > >From: Carsey, Jaben
>> >> > >Sent: Thursday, June 1, 2017 11:02 PM
>> >> > >To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
>> >> > >Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
>> >> > (tapandshah@hpe.com) <tapandshah@hpe.com>
>> >> > >Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support
>> >> > >upper-case alias
>> >> > >
>> >> > >Why not just use the AliasLower and make the overall change much
>> >> > smaller? Looks like the old version did the conversion,
>> >> > >but didn't use the result.
>> >> > >
>> >> > >Also, I notice that we are now checking the return value upon
>> >> > >delete,
>> >> which
>> >> > was explicitly not done in the old version.
>> >> > >There was this comment before: "We dont check the error return
>> >> > >on
>> >> > purpose since the variable may not exist."
>> >> > >
>> >> > >-Jaben
>> >> > >
>> >> > >
>> >> > >> -----Original Message-----
>> >> > >> From: Ni, Ruiyu
>> >> > >> Sent: Thursday, June 01, 2017 7:12 AM
>> >> > >> To: edk2-devel@lists.01.org
>> >> > >> Cc: Carsey, Jaben <jaben.carsey@intel.com>; Kinney, Michael D
>> >> > >> <michael.d.kinney@intel.com>
>> >> > >> Subject: [PATCH] ShellPkg/alias: Fix bug to support upper-case
>> >> > >> alias
>> >> > >> Importance: High
>> >> > >>
>> >> > >> alias in UEFI Shell is case insensitive.
>> >> > >> Old code saves the alias to variable storage without
>> >> > >> converting the alias to lower-case, which results upper case
>> >> > >> alias setting doesn't work.
>> >> > >> The patch converts the alias to lower case before saving to
>> >> > >> variable storage.
>> >> > >>
>> >> > >> Contributed-under: TianoCore Contribution Agreement 1.0
>> >> > >> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
>> >> > >> Cc: Jaben Carsey <jaben.carsey@intel.com>
>> >> > >> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>> >> > >> ---
>> >> > >> ShellPkg/Application/Shell/ShellProtocol.c | 50
>> >> > >> +++++++++++++++--
>> ----
>> >> --
>> >> > ----
>> >> > >> ---
>> >> > >> 1 file changed, 25 insertions(+), 25 deletions(-)
>> >> > >>
>> >> > >> diff --git a/ShellPkg/Application/Shell/ShellProtocol.c
>> >> > >> b/ShellPkg/Application/Shell/ShellProtocol.c
>> >> > >> index 347e162e62..b3b8acc0d0 100644
>> >> > >> --- a/ShellPkg/Application/Shell/ShellProtocol.c
>> >> > >> +++ b/ShellPkg/Application/Shell/ShellProtocol.c
>> >> > >> @@ -3463,40 +3463,40 @@ InternalSetAlias( {
>> >> > >> EFI_STATUS Status;
>> >> > >> CHAR16 *AliasLower;
>> >> > >> + BOOLEAN DeleteAlias;
>> >> > >>
>> >> > >> - // Convert to lowercase to make aliases case-insensitive
>> >> > >> - if (Alias != NULL) {
>> >> > >> - AliasLower = AllocateCopyPool (StrSize (Alias), Alias);
>> >> > >> - if (AliasLower == NULL) {
>> >> > >> - return EFI_OUT_OF_RESOURCES;
>> >> > >> - }
>> >> > >> - ToLower (AliasLower);
>> >> > >> - } else {
>> >> > >> - AliasLower = NULL;
>> >> > >> - }
>> >> > >> -
>> >> > >> - //
>> >> > >> - // We must be trying to remove one if Alias is NULL
>> >> > >> - //
>> >> > >> + DeleteAlias = FALSE;
>> >> > >> if (Alias == NULL) {
>> >> > >> //
>> >> > >> + // We must be trying to remove one if Alias is NULL
>> >> > >> // remove an alias (but passed in COMMAND parameter)
>> >> > >> //
>> >> > >> - Status = (gRT->SetVariable((CHAR16*)Command,
>> &gShellAliasGuid,
>> >> 0,
>> >> > 0,
>> >> > >> NULL));
>> >> > >> - } else {
>> >> > >> - //
>> >> > >> - // Add and replace are the same
>> >> > >> - //
>> >> > >> -
>> >> > >> - // We dont check the error return on purpose since the variable
>> may
>> >> > not
>> >> > >> exist.
>> >> > >> - gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0, 0,
>> >> NULL);
>> >> > >> + Alias = Command;
>> >> > >> + DeleteAlias = TRUE;
>> >> > >> + }
>> >> > >> + ASSERT (Alias != NULL);
>> >> > >>
>> >> > >> - Status = (gRT->SetVariable((CHAR16*)Alias, &gShellAliasGuid,
>> >> > >>
>> >> >
>> >>
>> EFI_VARIABLE_BOOTSERVICE_ACCESS|(Volatile?0:EFI_VARIABLE_NON_VOL
>> >> > >> ATILE), StrSize(Command), (VOID*)Command));
>> >> > >> + //
>> >> > >> + // Convert to lowercase to make aliases case-insensitive
>> >> > >> + //
>> >> > >> + AliasLower = AllocateCopyPool (StrSize (Alias), Alias);
>> >> > >> + if (AliasLower == NULL) {
>> >> > >> + return EFI_OUT_OF_RESOURCES;
>> >> > >> }
>> >> > >> + ToLower (AliasLower);
>> >> > >>
>> >> > >> - if (Alias != NULL) {
>> >> > >> - FreePool (AliasLower);
>> >> > >> + if (DeleteAlias) {
>> >> > >> + Status = gRT->SetVariable (AliasLower, &gShellAliasGuid, 0, 0,
>> NULL);
>> >> > >> + } else {
>> >> > >> + Status = gRT->SetVariable (
>> >> > >> + AliasLower, &gShellAliasGuid,
>> >> > >> + EFI_VARIABLE_BOOTSERVICE_ACCESS | (Volatile ? 0 :
>> >> > >> EFI_VARIABLE_NON_VOLATILE),
>> >> > >> + StrSize (Command), (VOID *) Command
>> >> > >> + );
>> >> > >> }
>> >> > >> +
>> >> > >> + FreePool (AliasLower);
>> >> > >> +
>> >> > >> return Status;
>> >> > >> }
>> >> > >>
>> >> > >> --
>> >> > >> 2.12.2.windows.2
>
next prev parent reply other threads:[~2017-06-04 0:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 14:11 [PATCH] ShellPkg/alias: Fix bug to support upper-case alias Ruiyu Ni
2017-06-01 14:14 ` Ni, Ruiyu
2017-06-01 15:01 ` Carsey, Jaben
2017-06-01 15:18 ` Ni, Ruiyu
2017-06-01 15:39 ` Carsey, Jaben
2017-06-01 15:42 ` Carsey, Jaben
2017-06-02 2:31 ` Ni, Ruiyu
2017-06-02 15:04 ` Carsey, Jaben
2017-06-02 16:12 ` Shah, Tapan
2017-06-04 0:47 ` Ni, Ruiyu [this message]
2017-06-05 15:25 ` Shah, Tapan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5B9862D6@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox