Re: [PATCH v2] MdeModulePkg/PciBus: Disable BME of all devices when entering RT

["Ni, Ruiyu" <ruiyu.ni@intel.com>]

Jiewen,
Any comments?

Thanks/Ray

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Ruiyu Ni
> Sent: Wednesday, November 1, 2017 12:49 PM
> To: edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Michael Turner
> <michael.turner@microsoft.com>; Yao, Jiewen <jiewen.yao@intel.com>
> Subject: [edk2] [PATCH v2] MdeModulePkg/PciBus: Disable BME of all
> devices when entering RT
> 
> The patch ensures all DMA transactions are blocked after ExitBootService.
> If a platform enables IOMMU before and needs disable IOMMU after
> ExitBootService, the IOMMU should be disabled after PCI bus driver disables
> BME.
> 
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Michael Turner <michael.turner@microsoft.com>
> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jeff Fan <vanjeff_919@hotmail.com>
> ---
>  MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h           |  2 +
>  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf      |  3 +
>  MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c | 86
> +++++++++++++++++++++++
>  3 files changed, 91 insertions(+)
> 
> diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> index 55eb3a5a80..79b5b71082 100644
> --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.h
> @@ -18,6 +18,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY
> KIND, EITHER EXPRESS OR IMPLIED.
> 
>  #include <PiDxe.h>
> 
> +#include <Guid/EventGroup.h>
> +
>  #include <Protocol/LoadedImage.h>
>  #include <Protocol/PciHostBridgeResourceAllocation.h>
>  #include <Protocol/PciIo.h>
> diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> index 97608bfcf2..d5b8fab3ca 100644
> --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> @@ -80,6 +80,9 @@ [LibraryClasses]
>    DebugLib
>    PeCoffLib
> 
> +[Guids]
> +  gEfiEventExitBootServicesGuid                   ## SOMETIMES_CONSUMES ##
> Event
> +
>  [Protocols]
>    gEfiPciHotPlugRequestProtocolGuid               ## SOMETIMES_PRODUCES
>    gEfiPciIoProtocolGuid                           ## BY_START
> diff --git a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> index 97bb971a59..004f2a3b5b 100644
> --- a/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> +++ b/MdeModulePkg/Bus/Pci/PciBusDxe/PciDeviceSupport.c
> @@ -21,6 +21,72 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY
> KIND, EITHER EXPRESS OR IMPLIED.
>  LIST_ENTRY  mPciDevicePool;
> 
>  /**
> + Disable Bus Master Enable bit in all devices in the list.
> +
> + @param Devices  A device list.
> +**/
> +VOID
> +DisableBmeOnTree (
> +  IN LIST_ENTRY      *Devices
> +  )
> +{
> +  LIST_ENTRY      *Link;
> +  PCI_IO_DEVICE   *PciIoDevice;
> +  UINT16           Command;
> +
> +  for ( Link = GetFirstNode (Devices)
> +      ; !IsNull (Devices, Link)
> +      ; Link = GetNextNode (Devices, Link)
> +      ) {
> +    PciIoDevice = PCI_IO_DEVICE_FROM_LINK (Link);
> +    //
> +    // Turn off all children's Bus Master, if any
> +    //
> +    DisableBmeOnTree (&PciIoDevice->ChildList);
> +
> +    //
> +    // If this is a device that supports BME, disable BME on this device.
> +    //
> +    if ((PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_BUS_MASTER) != 0)
> {
> +      PCI_READ_COMMAND_REGISTER(PciIoDevice, &Command);
> +      if ((Command & EFI_PCI_COMMAND_BUS_MASTER) != 0) {
> +        Command &= ~EFI_PCI_COMMAND_BUS_MASTER;
> +        PCI_SET_COMMAND_REGISTER (PciIoDevice, Command);
> +        DEBUG ((
> +          DEBUG_INFO,"  %02x   %02x      %02x         %04x\n",
> +          PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice-
> >FunctionNumber,
> +          Command
> +          ));
> +      }
> +    }
> +  }
> +}
> +
> +/**
> +  Exit Boot Services Event notification handler.
> +
> +  Disable Bus Master on any that were enabled during BDS.
> +
> +  @param[in]  Event     Event whose notification function is being invoked.
> +  @param[in]  Context   Pointer to the notification function's context.
> +
> +**/
> +VOID
> +EFIAPI
> +OnExitBootServices (
> +  IN      EFI_EVENT                 Event,
> +  IN      VOID                      *Context
> +  )
> +{
> +  DEBUG ((
> +    DEBUG_INFO,
> +    "PciBus: Disable Bus Master of all devices...\n"
> +    "  Bus# Device# Function#  NewCommand\n"
> +    ));
> +  DisableBmeOnTree(&mPciDevicePool);
> +}
> +
> +/**
>    Initialize the PCI devices pool.
> 
>  **/
> @@ -29,7 +95,27 @@ InitializePciDevicePool (
>    VOID
>    )
>  {
> +  EFI_EVENT   ExitBootServicesEvent;
> +  EFI_STATUS  Status;
> +
>    InitializeListHead (&mPciDevicePool);
> +
> +  //
> +  // DisableBME on ExitBootServices should be synchonized with any
> IOMMU ExitBootServices routine.
> +  // DisableBME should be run before the IOMMU protections are disabled.
> +  // One way to do this is to ensure that the IOMMU ExitBootServices
> callback runs at TPL_CALLBACK.
> +  //
> +  Status = gBS->CreateEventEx (
> +                  EVT_NOTIFY_SIGNAL,
> +                  TPL_NOTIFY,
> +                  OnExitBootServices,
> +                  NULL,
> +                  &gEfiEventExitBootServicesGuid,
> +                  &ExitBootServicesEvent
> +                  );
> +  if (EFI_ERROR (Status)) {
> +    DEBUG ((DEBUG_ERROR, "PciBus: Unable to hook ExitBootServices event
> + - %r\n", Status));  }
>  }
> 
>  /**
> --
> 2.12.2.windows.2
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel