From: "Ni, Ruiyu" <ruiyu.ni@intel.com>
To: "Zeng, Star" <star.zeng@intel.com>,
Ming Huang <ming.huang@linaro.org>,
"linaro-uefi@lists.linaro.org" <linaro-uefi@lists.linaro.org>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Zeng, Star" <star.zeng@intel.com>,
"huangming23@huawei.com" <huangming23@huawei.com>,
"Dong, Eric" <eric.dong@intel.com>,
"ard.biesheuvel@linaro.org" <ard.biesheuvel@linaro.org>,
"zhangjinsong2@huawei.com" <zhangjinsong2@huawei.com>,
"leif.lindholm@linaro.org" <leif.lindholm@linaro.org>,
"mengfanrong@huawei.com" <mengfanrong@huawei.com>,
"guoheyi@huawei.com" <guoheyi@huawei.com>,
"Gao, Liming" <liming.gao@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"waip23@126.com" <waip23@126.com>,
"wanghuiqiang@huawei.com" <wanghuiqiang@huawei.com>,
"huangdaode@hisilicon.com" <huangdaode@hisilicon.com>
Subject: Re: [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS
Date: Mon, 26 Mar 2018 02:55:06 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5BC0CEC3@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <0C09AFA07DD0434D9E2A0C6AEB0483103BA72588@shsmsx102.ccr.corp.intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Zeng,
> Star
> Sent: Thursday, March 22, 2018 4:39 PM
> To: Ming Huang <ming.huang@linaro.org>; linaro-uefi@lists.linaro.org; edk2-
> devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; huangming23@huawei.com; Dong, Eric
> <eric.dong@intel.com>; ard.biesheuvel@linaro.org;
> zhangjinsong2@huawei.com; leif.lindholm@linaro.org;
> mengfanrong@huawei.com; guoheyi@huawei.com; Gao, Liming
> <liming.gao@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>;
> waip23@126.com; wanghuiqiang@huawei.com; huangdaode@hisilicon.com
> Subject: Re: [edk2] [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace
> macro USB_BOOT_IO_BLOCKS
>
> Reviewed-by: Star Zeng <star.zeng@intel.com>
>
> Thanks,
> Star
> -----Original Message-----
> From: Ming Huang [mailto:ming.huang@linaro.org]
> Sent: Thursday, March 22, 2018 3:44 PM
> To: linaro-uefi@lists.linaro.org; edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric <eric.dong@intel.com>;
> Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>; leif.lindholm@linaro.org; ard.biesheuvel@linaro.org;
> guoheyi@huawei.com; wanghuiqiang@huawei.com;
> huangming23@huawei.com; zhangjinsong2@huawei.com;
> mengfanrong@huawei.com; huangdaode@hisilicon.com; waip23@126.com;
> Ming Huang <ming.huang@linaro.org>
> Subject: [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace macro
> USB_BOOT_IO_BLOCKS
>
> Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS set to 128
> because the block size of some USB devices are exceeded 512, like some virtual
> CD-ROM from BMC, the block size is 2048.
> So,the count blocks to transfer should be calculated by block size of the USB
> devices.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ming Huang <ming.huang@linaro.org>
> ---
> MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 16
> ++++++++++++----
> MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h | 4 ++--
> 2 files changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> index b84bfd2d7290..3bf6e6a81f3c 100644
> --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> @@ -814,11 +814,13 @@ UsbBootReadBlocks (
> USB_BOOT_READ10_CMD ReadCmd;
> EFI_STATUS Status;
> UINT16 Count;
> + UINT16 CountMax;
> UINT32 BlockSize;
> UINT32 ByteSize;
> UINT32 Timeout;
>
> BlockSize = UsbMass->BlockIoMedia.BlockSize;
> + CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize);
> Status = EFI_SUCCESS;
>
> while (TotalBlock > 0) {
> @@ -827,7 +829,7 @@ UsbBootReadBlocks (
> // on the device. We must split the total block because the READ10
> // command only has 16 bit transfer length (in the unit of block).
> //
> - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
> USB_BOOT_IO_BLOCKS);
> + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax);
> ByteSize = (UINT32)Count * BlockSize;
>
> //
> @@ -890,11 +892,13 @@ UsbBootWriteBlocks (
> USB_BOOT_WRITE10_CMD WriteCmd;
> EFI_STATUS Status;
> UINT16 Count;
> + UINT16 CountMax;
> UINT32 BlockSize;
> UINT32 ByteSize;
> UINT32 Timeout;
>
> BlockSize = UsbMass->BlockIoMedia.BlockSize;
> + CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize);
> Status = EFI_SUCCESS;
>
> while (TotalBlock > 0) {
> @@ -903,7 +907,7 @@ UsbBootWriteBlocks (
> // on the device. We must split the total block because the WRITE10
> // command only has 16 bit transfer length (in the unit of block).
> //
> - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
> USB_BOOT_IO_BLOCKS);
> + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax);
> ByteSize = (UINT32)Count * BlockSize;
>
> //
> @@ -966,18 +970,20 @@ UsbBootReadBlocks16 (
> UINT8 ReadCmd[16];
> EFI_STATUS Status;
> UINT16 Count;
> + UINT16 CountMax;
> UINT32 BlockSize;
> UINT32 ByteSize;
> UINT32 Timeout;
>
> BlockSize = UsbMass->BlockIoMedia.BlockSize;
> + CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize);
> Status = EFI_SUCCESS;
>
> while (TotalBlock > 0) {
> //
> // Split the total blocks into smaller pieces.
> //
> - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
> USB_BOOT_IO_BLOCKS);
> + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax);
> ByteSize = (UINT32)Count * BlockSize;
>
> //
> @@ -1040,18 +1046,20 @@ UsbBootWriteBlocks16 (
> UINT8 WriteCmd[16];
> EFI_STATUS Status;
> UINT16 Count;
> + UINT16 CountMax;
> UINT32 BlockSize;
> UINT32 ByteSize;
> UINT32 Timeout;
>
> BlockSize = UsbMass->BlockIoMedia.BlockSize;
> + CountMax = (UINT16)(USB_BOOT_MAX_CARRY_SIZE / BlockSize);
> Status = EFI_SUCCESS;
>
> while (TotalBlock > 0) {
> //
> // Split the total blocks into smaller pieces.
> //
> - Count = (UINT16)((TotalBlock < USB_BOOT_IO_BLOCKS) ? TotalBlock :
> USB_BOOT_IO_BLOCKS);
> + Count = (UINT16)((TotalBlock < CountMax) ? TotalBlock : CountMax);
> ByteSize = (UINT32)Count * BlockSize;
>
> //
> diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> index 13a926035ceb..f8a0708350c7 100644
> --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> @@ -65,9 +65,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY
> KIND, EITHER EXPRESS OR IMPLIED.
> #define USB_PDT_SIMPLE_DIRECT 0x0E ///< Simplified direct access
> device
>
> //
> -// Other parameters, Max carried size is 512B * 128 = 64KB
> +// Other parameters, Max carried size is 64KB.
> //
> -#define USB_BOOT_IO_BLOCKS 128
> +#define USB_BOOT_MAX_CARRY_SIZE SIZE_64KB
>
> //
> // Retry mass command times, set by experience
> --
> 1.9.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-03-26 2:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-22 7:44 [MdeModulePkg/Usb v2 0/1] Calculating the count of blocks to transfer Ming Huang
2018-03-22 7:44 ` [MdeModulePkg/Usb v2 1/1] MdeModulePkg/Usb: Replace macro USB_BOOT_IO_BLOCKS Ming Huang
2018-03-22 8:39 ` Zeng, Star
2018-03-26 2:55 ` Ni, Ruiyu [this message]
2018-03-26 3:05 ` Zeng, Star
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5BC0CEC3@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox