From: "Ni, Ruiyu" <ruiyu.ni@intel.com>
To: "Dong, Eric" <eric.dong@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Subject: Re: UefiCpuPkg/MpInitLib: Fix S3 resume hang issue.
Date: Thu, 19 Jul 2018 04:40:34 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5BD7F235@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20180718051009.19748-1-eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.nI@intel.com>
Thanks/Ray
> -----Original Message-----
> From: Dong, Eric
> Sent: Wednesday, July 18, 2018 1:10 PM
> To: edk2-devel@lists.01.org
> Cc: Laszlo Ersek <lersek@redhat.com>; Ni, Ruiyu <ruiyu.ni@intel.com>
> Subject: UefiCpuPkg/MpInitLib: Fix S3 resume hang issue.
>
> When resume from S3 and CPU loop mode is MWait mode, if driver calls APs
> to do task at EndOfPei point, the APs can't been wake up and bios hang at
> that point.
>
> The root cause is PiSmmCpuDxeSmm driver wakes up APs with HLT mode
> during S3 resume phase to do SMM relocation.
> After this task, PiSmmCpuDxeSmm driver not restore APs context which
> make CpuMpPei driver saved wake up buffer not works.
>
> The solution for this issue is let CpuMpPei driver hook S3SmmInitDone ppi
> notification. In this notify function, it check whether Cpu Loop mode is not
> HLT mode. If yes, CpuMpPei driver will set a flag to force BSP use INIT-SIPI -
> SIPI command to wake up the APs.
>
> Cc: Laszlo Ersek <lersek@redhat.com>
> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Dong <eric.dong@intel.com>
> ---
> UefiCpuPkg/Library/MpInitLib/MpLib.c | 16 ++++-
> UefiCpuPkg/Library/MpInitLib/MpLib.h | 9 +++
> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 ++
> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 89
> +++++++++++++++++++++++++++
> 4 files changed, 116 insertions(+), 2 deletions(-)
>
> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> index 722db2a01f..e5c701ddeb 100644
> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> @@ -985,13 +985,15 @@ WakeUpAP (
> CpuMpData->FinishedCount = 0;
> ResetVectorRequired = FALSE;
>
> - if (CpuMpData->ApLoopMode == ApInHltLoop ||
> + if (CpuMpData->WakeUpByInitSipiSipi ||
> CpuMpData->InitFlag != ApInitDone) {
> ResetVectorRequired = TRUE;
> AllocateResetVector (CpuMpData);
> FillExchangeInfoData (CpuMpData);
> SaveLocalApicTimerSetting (CpuMpData);
> - } else if (CpuMpData->ApLoopMode == ApInMwaitLoop) {
> + }
> +
> + if (CpuMpData->ApLoopMode == ApInMwaitLoop) {
> //
> // Get AP target C-state each time when waking up AP,
> // for it maybe updated by platform again @@ -1076,6 +1078,13 @@
> WakeUpAP (
> if (ResetVectorRequired) {
> FreeResetVector (CpuMpData);
> }
> +
> + //
> + // After one round of Wakeup Ap actions, need to re-sync ApLoopMode
> + with // WakeUpByInitSipiSipi flag. WakeUpByInitSipiSipi flag maybe
> + changed by // S3SmmInitDone Ppi.
> + //
> + CpuMpData->WakeUpByInitSipiSipi = (CpuMpData->ApLoopMode ==
> + ApInHltLoop);
> }
>
> /**
> @@ -1648,6 +1657,9 @@ MpInitLibInitialize (
> //
> CpuMpData->ApLoopMode = ApLoopMode;
> DEBUG ((DEBUG_INFO, "AP Loop Mode is %d\n", CpuMpData-
> >ApLoopMode));
> +
> + CpuMpData->WakeUpByInitSipiSipi = (CpuMpData->ApLoopMode ==
> + ApInHltLoop);
> +
> //
> // Set up APs wakeup signal buffer
> //
> diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> index 6958080ac1..9d0b866d09 100644
> --- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> @@ -250,6 +250,15 @@ struct _CPU_MP_DATA {
> UINT32 ProcessorFlags;
> UINT64 MicrocodeDataAddress;
> UINT32 MicrocodeRevision;
> +
> + //
> + // Whether need to use Init-Sipi-Sipi to wake up the APs.
> + // Two cases need to set this value to TRUE. One is in HLT // loop
> + mode, the other is resume from S3 which loop mode // will be hardcode
> + change to HLT mode by PiSmmCpuDxeSmm // driver.
> + //
> + BOOLEAN WakeUpByInitSipiSipi;
> };
>
> extern EFI_GUID mCpuInitMpLibHobGuid;
> diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
> b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
> index fa84e392af..43a3b3b036 100644
> --- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
> +++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
> @@ -44,6 +44,7 @@
> [Packages]
> MdePkg/MdePkg.dec
> UefiCpuPkg/UefiCpuPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
>
> [LibraryClasses]
> BaseLib
> @@ -54,6 +55,7 @@
> CpuLib
> UefiCpuLib
> SynchronizationLib
> + PeiServicesLib
>
> [Pcd]
> gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber ##
> CONSUMES
> @@ -64,3 +66,5 @@
> gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ##
> CONSUMES
> gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ##
> SOMETIMES_CONSUMES
>
> +[Guids]
> + gEdkiiS3SmmInitDoneGuid
> \ No newline at end of file
> diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> index 92f28681e4..06d966b227 100644
> --- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> +++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
> @@ -13,6 +13,87 @@
> **/
>
> #include "MpLib.h"
> +#include <Library/PeiServicesLib.h>
> +#include <Guid/S3SmmInitDone.h>
> +
> +/**
> + S3 SMM Init Done notification function.
> +
> + @param PeiServices Indirect reference to the PEI Services Table.
> + @param NotifyDesc Address of the notification descriptor data
> structure.
> + @param InvokePpi Address of the PPI that was invoked.
> +
> + @retval EFI_SUCCESS The function completes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NotifyOnS3SmmInitDonePpi (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
> + IN VOID *InvokePpi
> + );
> +
> +
> +//
> +// Global function
> +//
> +EFI_PEI_NOTIFY_DESCRIPTOR mS3SmmInitDoneNotifyDesc = {
> + EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> +EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
> + &gEdkiiS3SmmInitDoneGuid,
> + NotifyOnS3SmmInitDonePpi
> +};
> +
> +/**
> + The function prototype for invoking a function on an Application Processor.
> +
> + This definition is used by the UEFI MP Serices Protocol, and the PI
> + SMM System Table.
> +
> + @param[in,out] Buffer The pointer to private data buffer.
> +**/
> +VOID
> +EmptyApProcedure (
> + IN OUT VOID * Buffer
> + )
> +{
> +}
> +
> +/**
> + S3 SMM Init Done notification function.
> +
> + @param PeiServices Indirect reference to the PEI Services Table.
> + @param NotifyDesc Address of the notification descriptor data
> structure.
> + @param InvokePpi Address of the PPI that was invoked.
> +
> + @retval EFI_SUCCESS The function completes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NotifyOnS3SmmInitDonePpi (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
> + IN VOID *InvokePpi
> + )
> +{
> + CPU_MP_DATA *CpuMpData;
> +
> + CpuMpData = GetCpuMpData ();
> +
> + //
> + // PiSmmCpuDxeSmm driver hardcode change the loop mode to HLT mode.
> + // So in this notify function, code need to check the current loop
> + // mode, if it is not HLT mode, code need to change loop mode back //
> + to the original mode.
> + //
> + if (CpuMpData->ApLoopMode != ApInHltLoop) {
> + CpuMpData->WakeUpByInitSipiSipi = TRUE; }
> +
> + return EFI_SUCCESS;
> +}
> +
>
> /**
> Enable Debug Agent to support source debugging on AP function.
> @@ -240,7 +321,15 @@ InitMpGlobalData (
> IN CPU_MP_DATA *CpuMpData
> )
> {
> + EFI_STATUS Status;
> +
> SaveCpuMpData (CpuMpData);
> +
> + ///
> + /// Install Notify
> + ///
> + Status = PeiServicesNotifyPpi (&mS3SmmInitDoneNotifyDesc);
> + ASSERT_EFI_ERROR (Status);
> }
>
> /**
> --
> 2.15.0.windows.1
next prev parent reply other threads:[~2018-07-19 4:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 5:10 UefiCpuPkg/MpInitLib: Fix S3 resume hang issue Eric Dong
2018-07-19 4:40 ` Ni, Ruiyu [this message]
2018-07-19 11:56 ` Laszlo Ersek
2018-07-19 12:09 ` Dong, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5BD7F235@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox