From: "Ni, Ray" <ray.ni@intel.com>
To: "Yao, Jiewen" <jiewen.yao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Chaganty, Rangasai V" <rangasai.v.chaganty@intel.com>,
"Lou, Yun" <yun.lou@intel.com>
Subject: Re: [PATCH V3 5/6] IntelSiliconPkg/SamplePlatformDevicePolicyDxe: Add sample policy.
Date: Mon, 11 Nov 2019 08:23:46 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5C357B99@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20191107133831.22412-6-jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
> -----Original Message-----
> From: Yao, Jiewen <jiewen.yao@intel.com>
> Sent: Thursday, November 7, 2019 9:39 PM
> To: devel@edk2.groups.io
> Cc: Ni, Ray <ray.ni@intel.com>; Chaganty, Rangasai V
> <rangasai.v.chaganty@intel.com>; Lou, Yun <yun.lou@intel.com>
> Subject: [PATCH V3 5/6] IntelSiliconPkg/SamplePlatformDevicePolicyDxe:
> Add sample policy.
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
>
> This driver provides the platform sample policy to measure a NVMe card.
>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
> Cc: Yun Lou <yun.lou@intel.com>
> Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
> ---
> .../SamplePlatformDevicePolicyDxe.c | 204 ++++++++++++++++++
> .../SamplePlatformDevicePolicyDxe.inf | 40 ++++
> 2 files changed, 244 insertions(+)
> create mode 100644
> Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDevicePoli
> cyDxe/SamplePlatformDevicePolicyDxe.c
> create mode 100644
> Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDevicePoli
> cyDxe/SamplePlatformDevicePolicyDxe.inf
>
> diff --git
> a/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDeviceP
> olicyDxe/SamplePlatformDevicePolicyDxe.c
> b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDeviceP
> olicyDxe/SamplePlatformDevicePolicyDxe.c
> new file mode 100644
> index 0000000000..5b0897d6af
> --- /dev/null
> +++ b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformD
> +++ evicePolicyDxe/SamplePlatformDevicePolicyDxe.c
> @@ -0,0 +1,204 @@
> +/** @file
> + EDKII Device Security library for PCI device
> +
> +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> +SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Uefi.h>
> +#include <IndustryStandard/Spdm.h>
> +#include <IndustryStandard/Pci.h>
> +#include <Protocol/PciIo.h>
> +#include <Protocol/DeviceSecurity.h>
> +#include <Protocol/PlatformDeviceSecurityPolicy.h>
> +#include <Library/DebugLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +
> +EDKII_DEVICE_SECURITY_POLICY mDeviceSecurityPolicyNone = {
> + EDKII_DEVICE_SECURITY_POLICY_REVISION,
> + 0,
> + 0,
> +};
> +EDKII_DEVICE_SECURITY_POLICY mDeviceSecurityPolicyMeasurement
> = {
> + EDKII_DEVICE_SECURITY_POLICY_REVISION,
> + EDKII_DEVICE_MEASUREMENT_REQUIRED,
> + 0,
> +};
> +
> +/**
> + This function returns the device security policy associated with the device.
> +
> + The device security driver may call this interface to get the
> + platform policy for the specific device and determine if the
> + measurement or authentication is required.
> +
> + @param[in] This The protocol instance pointer.
> + @param[in] DeviceId The Identifier for the device.
> + @param[out] DeviceSecurityPolicy The Device Security Policy associated
> with the device.
> +
> + @retval EFI_SUCCESS The device security policy is returned
> + @retval EFI_UNSUPPORTED The function is unsupported for the
> specific Device.
> +**/
> +EFI_STATUS
> +EFIAPI
> +GetDevicePolicy (
> + IN EDKII_DEVICE_SECURITY_POLICY_PROTOCOL *This,
> + IN EDKII_DEVICE_IDENTIFIER *DeviceId,
> + OUT EDKII_DEVICE_SECURITY_POLICY *DeviceSecurityPolicy
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PCI_IO_PROTOCOL *PciIo;
> + UINT16 PciVendorId;
> + UINT16 PciDeviceId;
> +
> + CopyMem (DeviceSecurityPolicy, &mDeviceSecurityPolicyNone,
> + sizeof(EDKII_DEVICE_SECURITY_POLICY));
> +
> + DEBUG ((DEBUG_INFO, "GetDevicePolicy - 0x%g\n",
> + &DeviceId->DeviceType));
> +
> + if (!CompareGuid (&DeviceId->DeviceType,
> &gEdkiiDeviceIdentifierTypePciGuid)) {
> + return EFI_SUCCESS;
> + }
> +
> + Status = gBS->HandleProtocol (
> + DeviceId->DeviceHandle,
> + &gEdkiiDeviceIdentifierTypePciGuid,
> + (VOID **)&PciIo
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "Locate - DeviceIdentifierTypePci - %r\n",
> Status));
> + return EFI_SUCCESS;
> + }
> +
> + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16,
> + PCI_VENDOR_ID_OFFSET, 1, &PciVendorId); ASSERT_EFI_ERROR(Status);
> + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16,
> + PCI_DEVICE_ID_OFFSET, 1, &PciDeviceId); ASSERT_EFI_ERROR(Status);
> + DEBUG ((DEBUG_INFO, "PCI Info - %04x:%04x\n", PciVendorId,
> + PciDeviceId));
> +
> + if ((PciVendorId == 0x8086) && (PciDeviceId == 0x0B60)) {
> + CopyMem (DeviceSecurityPolicy, &mDeviceSecurityPolicyMeasurement,
> + sizeof(EDKII_DEVICE_SECURITY_POLICY));
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + This function sets the device state based upon the authentication result.
> +
> + The device security driver may call this interface to give the
> + platform a notify based upon the measurement or authentication result.
> + If the authentication or measurement fails, the platform may choose:
> + 1) Do nothing.
> + 2) Disable this device or slot temporarily and continue boot.
> + 3) Reset the platform and retry again.
> + 4) Disable this device or slot permanently.
> + 5) Any other platform specific action.
> +
> + @param[in] This The protocol instance pointer.
> + @param[in] DeviceId The Identifier for the device.
> + @param[in] DeviceSecurityState The Device Security state associated
> with the device.
> +
> + @retval EFI_SUCCESS The device state is set
> + @retval EFI_UNSUPPORTED The function is unsupported for the
> specific Device.
> +**/
> +EFI_STATUS
> +EFIAPI
> +NotifyDeviceState (
> + IN EDKII_DEVICE_SECURITY_POLICY_PROTOCOL *This,
> + IN EDKII_DEVICE_IDENTIFIER *DeviceId,
> + IN EDKII_DEVICE_SECURITY_STATE *DeviceSecurityState
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PCI_IO_PROTOCOL *PciIo;
> + UINT16 PciVendorId;
> + UINT16 PciDeviceId;
> + UINTN Segment;
> + UINTN Bus;
> + UINTN Device;
> + UINTN Function;
> +
> + DEBUG ((DEBUG_INFO, "NotifyDeviceState - 0x%g\n",
> + &DeviceId->DeviceType));
> +
> + if (!CompareGuid (&DeviceId->DeviceType,
> &gEdkiiDeviceIdentifierTypePciGuid)) {
> + return EFI_SUCCESS;
> + }
> +
> + Status = gBS->HandleProtocol (
> + DeviceId->DeviceHandle,
> + &gEdkiiDeviceIdentifierTypePciGuid,
> + (VOID **)&PciIo
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "Locate - DeviceIdentifierTypePci - %r\n",
> Status));
> + return EFI_SUCCESS;
> + }
> +
> + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16,
> + PCI_VENDOR_ID_OFFSET, 1, &PciVendorId); ASSERT_EFI_ERROR(Status);
> + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16,
> + PCI_DEVICE_ID_OFFSET, 1, &PciDeviceId); ASSERT_EFI_ERROR(Status);
> + DEBUG ((DEBUG_INFO, "PCI Info - %04x:%04x\n", PciVendorId,
> + PciDeviceId));
> +
> + Status = PciIo->GetLocation (
> + PciIo,
> + &Segment,
> + &Bus,
> + &Device,
> + &Function
> + );
> + if (!EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_INFO, "PCI Loc - %04x:%02x:%02x:%02x\n",
> + Segment, Bus, Device, Function)); }
> +
> + DEBUG ((DEBUG_INFO, "State - Measurement - 0x%08x, Authentication -
> 0x%08x\n",
> + DeviceSecurityState->MeasurementState,
> + DeviceSecurityState->AuthenticationState
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +EDKII_DEVICE_SECURITY_POLICY_PROTOCOL mDeviceSecurityPolicy = {
> + EDKII_DEVICE_SECURITY_POLICY_PROTOCOL_REVISION,
> + GetDevicePolicy,
> + NotifyDeviceState,
> +};
> +
> +/**
> + Entrypoint of the device security driver.
> +
> + @param[in] ImageHandle ImageHandle of the loaded driver @param[in]
> + SystemTable Pointer to the System Table
> +
> + @retval EFI_SUCCESS The Protocol is installed.
> + @retval EFI_OUT_OF_RESOURCES Not enough resources available to
> initialize driver.
> + @retval EFI_DEVICE_ERROR A device error occurred attempting to
> initialize the driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +MainEntryPoint (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_HANDLE Handle;
> + EFI_STATUS Status;
> +
> + Handle = NULL;
> + Status = gBS->InstallProtocolInterface (
> + &Handle,
> + &gEdkiiDeviceSecurityPolicyProtocolGuid,
> + EFI_NATIVE_INTERFACE,
> + &mDeviceSecurityPolicy
> + );
> + ASSERT_EFI_ERROR(Status);
> +
> + return Status;
> +}
> diff --git
> a/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDeviceP
> olicyDxe/SamplePlatformDevicePolicyDxe.inf
> b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformDeviceP
> olicyDxe/SamplePlatformDevicePolicyDxe.inf
> new file mode 100644
> index 0000000000..a9b77d8371
> --- /dev/null
> +++ b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/SamplePlatformD
> +++ evicePolicyDxe/SamplePlatformDevicePolicyDxe.inf
> @@ -0,0 +1,40 @@
> +## @file
> +# EDKII Device Security library for PCI device # # Copyright (c) 2019,
> +Intel Corporation. All rights reserved.<BR> # SPDX-License-Identifier:
> +BSD-2-Clause-Patent # ##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = SamplePlatformDevicePolicyDxe
> + FILE_GUID = 7EA7AACF-7ED3-4166-8271-B21156523620
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = MainEntryPoint
> +
> +[Sources]
> + SamplePlatformDevicePolicyDxe.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + IntelSiliconPkg/IntelSiliconPkg.dec
> +
> +[LibraryClasses]
> + UefiRuntimeServicesTableLib
> + UefiBootServicesTableLib
> + UefiDriverEntryPoint
> + MemoryAllocationLib
> + DevicePathLib
> + BaseMemoryLib
> + PrintLib
> + DebugLib
> +
> +[Protocols]
> + gEdkiiDeviceSecurityPolicyProtocolGuid ## PRODUCES
> + gEdkiiDeviceIdentifierTypePciGuid ## COMSUMES
> +
> +[Depex]
> + TRUE
> --
> 2.19.2.windows.1
next prev parent reply other threads:[~2019-11-11 8:23 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-07 13:38 [PATCH V3 0/6] Add Device Security driver Yao, Jiewen
2019-11-07 13:38 ` [PATCH V3 1/6] IntelSiliconPkg/Include: Add Intel PciSecurity definition Yao, Jiewen
2019-11-08 6:58 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 2/6] IntelSiliconPkg/Include: Add Platform Device Security Policy protocol Yao, Jiewen
2019-11-08 6:59 ` Ni, Ray
2019-11-08 7:01 ` Yao, Jiewen
2019-11-08 7:10 ` Ni, Ray
2019-11-09 7:12 ` Yao, Jiewen
2019-11-07 13:38 ` [PATCH V3 3/6] IntelSiliconPkg/dec: Add ProtocolGuid definition Yao, Jiewen
2019-11-08 7:01 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 4/6] IntelSiliconPkg/IntelPciDeviceSecurityDxe: Add PciSecurity Yao, Jiewen
2019-11-11 8:19 ` Ni, Ray
2019-11-11 10:16 ` Yao, Jiewen
2019-11-11 14:40 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 5/6] IntelSiliconPkg/SamplePlatformDevicePolicyDxe: Add sample policy Yao, Jiewen
2019-11-11 8:23 ` Ni, Ray [this message]
2019-11-07 13:38 ` [PATCH V3 6/6] IntelSiliconPkg/dsc: Add Device Security component Yao, Jiewen
2019-11-11 8:23 ` Ni, Ray
2019-11-08 4:23 ` [edk2-devel] [PATCH V3 0/6] Add Device Security driver Javeed, Ashraf
2019-11-08 5:14 ` Yao, Jiewen
2019-11-08 10:25 ` Javeed, Ashraf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5C357B99@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox