From: "Ni, Ray" <ray.ni@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Dong, Eric" <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Subject: Re: [edk2-devel] [PATCH v2] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time.
Date: Thu, 28 Nov 2019 06:37:34 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5C371687@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20191128061716.196-1-eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Dong,
> Eric
> Sent: Thursday, November 28, 2019 2:17 PM
> To: devel@edk2.groups.io
> Cc: Ni, Ray <ray.ni@intel.com>; Laszlo Ersek <lersek@redhat.com>
> Subject: [edk2-devel] [PATCH v2] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid
> allocate Token every time.
>
> v2 changes:
>
> Minor update based on comments.
>
>
>
> v1 changes:
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
>
> Current logic allocate Token every time when need to use it. The logic
> caused SMI latency raised to very high. Update logic to allocate Token
> buffer at driver's entry point. Later use the token from the allocated
> token buffer. Only when all the buffer have been used, then need to
> allocate new buffer.
>
> Signed-off-by: Eric Dong <eric.dong@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Laszlo Ersek <lersek@redhat.com>
> ---
> UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 56
> ++++++++++++++++++++--
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 16 +++++++
> 2 files changed, 68 insertions(+), 4 deletions(-)
>
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> index d8d2b6f444..4632e5b0c2 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
> @@ -492,6 +492,23 @@ FreeTokens (
> {
>
> LIST_ENTRY *Link;
>
> PROCEDURE_TOKEN *ProcToken;
>
> + TOKEN_BUFFER *TokenBuf;
>
> +
>
> + //
>
> + // Not free the buffer, just clear the UsedTokenNum. In order to
>
> + // avoid later trig allcate action again when need to use token.
>
> + //
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> +
>
> + Link = GetFirstNode (&gSmmCpuPrivate->OldTokenBufList);
>
> + while (!IsNull (&gSmmCpuPrivate->OldTokenBufList, Link)) {
>
> + TokenBuf = TOKEN_BUFFER_FROM_LINK (Link);
>
> +
>
> + Link = RemoveEntryList (&TokenBuf->Link);
>
> +
>
> + FreePool (TokenBuf->Buffer);
>
> + FreePool (TokenBuf);
>
> + }
>
>
>
> while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {
>
> Link = GetFirstNode (&gSmmCpuPrivate->TokenList);
>
> @@ -499,7 +516,6 @@ FreeTokens (
>
>
> RemoveEntryList (&ProcToken->Link);
>
>
>
> - FreePool ((VOID *)ProcToken->ProcedureToken);
>
> FreePool (ProcToken);
>
> }
>
> }
>
> @@ -1115,13 +1131,35 @@ CreateToken (
> VOID
>
> )
>
> {
>
> - PROCEDURE_TOKEN *ProcToken;
>
> + PROCEDURE_TOKEN *ProcToken;
>
> SPIN_LOCK *CpuToken;
>
> UINTN SpinLockSize;
>
> + TOKEN_BUFFER *TokenBuf;
>
>
>
> SpinLockSize = GetSpinLockProperties ();
>
> - CpuToken = AllocatePool (SpinLockSize);
>
> - ASSERT (CpuToken != NULL);
>
> +
>
> + if (gSmmCpuPrivate->UsedTokenNum ==
> MAX_PRE_RESERVE_TOKEN_COUNT) {
>
> + DEBUG((DEBUG_INFO, "CpuSmm: No free token buffer, allocate new
> buffer!\n"));
>
> +
>
> + //
>
> + // Record current token buffer for later free action usage.
>
> + // Current used token buffer not in this list.
>
> + //
>
> + TokenBuf = AllocatePool (sizeof (TOKEN_BUFFER));
>
> + ASSERT (TokenBuf != NULL);
>
> + TokenBuf->Signature = TOKEN_BUFFER_SIGNATURE;
>
> + TokenBuf->Buffer = gSmmCpuPrivate->CurrentTokenBuf;
>
> +
>
> + InsertTailList (&gSmmCpuPrivate->OldTokenBufList, &TokenBuf->Link);
>
> +
>
> + gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool (SpinLockSize *
> MAX_PRE_RESERVE_TOKEN_COUNT);
>
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> + }
>
> +
>
> + CpuToken = (SPIN_LOCK *)(gSmmCpuPrivate->CurrentTokenBuf +
> SpinLockSize * gSmmCpuPrivate->UsedTokenNum);
>
> + gSmmCpuPrivate->UsedTokenNum++;
>
> +
>
> InitializeSpinLock (CpuToken);
>
> AcquireSpinLock (CpuToken);
>
>
>
> @@ -1737,10 +1775,20 @@ InitializeDataForMmMp (
> VOID
>
> )
>
> {
>
> + UINTN SpinLockSize;
>
> +
>
> + SpinLockSize = GetSpinLockProperties ();
>
> + DEBUG((DEBUG_INFO, "CpuSmm: SpinLock Size = 0x%x\n", SpinLockSize));
>
> +
>
> + gSmmCpuPrivate->CurrentTokenBuf = AllocateZeroPool (SpinLockSize *
> MAX_PRE_RESERVE_TOKEN_COUNT);
>
> + ASSERT (gSmmCpuPrivate->CurrentTokenBuf != NULL);
>
> + gSmmCpuPrivate->UsedTokenNum = 0;
>
> +
>
> gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof
> (PROCEDURE_WRAPPER) * gSmmCpuPrivate-
> >SmmCoreEntryContext.NumberOfCpus);
>
> ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);
>
>
>
> InitializeListHead (&gSmmCpuPrivate->TokenList);
>
> + InitializeListHead (&gSmmCpuPrivate->OldTokenBufList);
>
> }
>
>
>
> /**
>
> diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> index 8c29f1a558..36fd0dae92 100644
> --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> @@ -198,6 +198,7 @@ typedef UINT32
> SMM_CPU_ARRIVAL_EXCEPTIONS;
> #define ARRIVAL_EXCEPTION_DELAYED 0x2
>
> #define ARRIVAL_EXCEPTION_SMI_DISABLED 0x4
>
>
>
> +#define MAX_PRE_RESERVE_TOKEN_COUNT 0x512
>
> //
>
> // Wrapper used to convert EFI_AP_PROCEDURE2 and EFI_AP_PROCEDURE.
>
> //
>
> @@ -217,6 +218,17 @@ typedef struct {
>
>
> #define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN,
> Link, PROCEDURE_TOKEN_SIGNATURE)
>
>
>
> +#define TOKEN_BUFFER_SIGNATURE SIGNATURE_32 ('T', 'K', 'B', 'S')
>
> +
>
> +typedef struct {
>
> + UINTN Signature;
>
> + LIST_ENTRY Link;
>
> +
>
> + UINT8 *Buffer;
>
> +} TOKEN_BUFFER;
>
> +
>
> +#define TOKEN_BUFFER_FROM_LINK(a) CR (a, TOKEN_BUFFER, Link,
> TOKEN_BUFFER_SIGNATURE)
>
> +
>
> //
>
> // Private structure for the SMM CPU module that is stored in DXE Runtime
> memory
>
> // Contains the SMM Configuration Protocols that is produced.
>
> @@ -243,6 +255,10 @@ typedef struct {
> PROCEDURE_WRAPPER *ApWrapperFunc;
>
> LIST_ENTRY TokenList;
>
>
>
> + LIST_ENTRY OldTokenBufList;
>
> +
>
> + UINT8 *CurrentTokenBuf;
>
> + UINTN UsedTokenNum; // Only record tokens used in
> CurrentTokenBuf.
>
> } SMM_CPU_PRIVATE_DATA;
>
>
>
> extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
>
> --
> 2.23.0.windows.1
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
>
> View/Reply Online (#51442): https://edk2.groups.io/g/devel/message/51442
> Mute This Topic: https://groups.io/mt/63850169/1712937
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> -=-=-=-=-=-=
next prev parent reply other threads:[~2019-11-28 6:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-28 6:17 [PATCH v2] UefiCpuPkg/PiSmmCpuDxeSmm: Avoid allocate Token every time Dong, Eric
2019-11-28 6:37 ` Ni, Ray [this message]
2019-11-28 13:15 ` [edk2-devel] " Philippe Mathieu-Daudé
2019-12-04 5:44 ` Dong, Eric
2019-11-28 13:57 ` Laszlo Ersek
2019-11-29 1:22 ` Ni, Ray
2019-11-29 7:17 ` Laszlo Ersek
2019-12-02 5:14 ` Ni, Ray
2019-12-02 12:56 ` Laszlo Ersek
2019-11-29 3:02 ` [edk2-devel] " Dong, Eric
2019-11-29 7:39 ` Laszlo Ersek
2019-12-04 5:33 ` Dong, Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5C371687@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox