From: "Ni, Ray" <ray.ni@intel.com>
To: "Gao, Zhichao" <zhichao.gao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Gao, Liming" <liming.gao@intel.com>
Subject: Re: [PATCH] MdeModulePkg/PartitionDxe: Seperate the Udf handler
Date: Wed, 24 Jun 2020 08:32:27 +0000 [thread overview]
Message-ID: <734D49CCEBEEF84792F5B80ED585239D5C5D1BBB@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <20200624055610.13984-1-zhichao.gao@intel.com>
Zhichao,
Will two BlockIo child devices cover the same range in the ISO after your patch?
I don't think that's a valid behavior.
Thanks,
Ray
> -----Original Message-----
> From: Gao, Zhichao <zhichao.gao@intel.com>
> Sent: Wednesday, June 24, 2020 1:56 PM
> To: devel@edk2.groups.io
> Cc: Wu, Hao A <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: [PATCH] MdeModulePkg/PartitionDxe: Seperate the Udf handler
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2823
>
> Some linux iso like Redhat would contain both MBR info in the first
> 512 bytes and volume info at the beginning of 32KB offset.
> But the partition driver would only choose one of the GPT, MBR, and
> UDF(el torito compatible) to install the partition. That would lose
> one info for such linux ISO during one connect. And UDF(el torito
> compatible) is not conflicted with MBR/GPT. So partition driver should
> check UDF and MBR/GPT separately.
>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
> ---
> .../Universal/Disk/PartitionDxe/Partition.c | 52 +++++++++++++------
> 1 file changed, 37 insertions(+), 15 deletions(-)
>
> diff --git a/MdeModulePkg/Universal/Disk/PartitionDxe/Partition.c
> b/MdeModulePkg/Universal/Disk/PartitionDxe/Partition.c
> index d1c878ad2e..562490db4f 100644
> --- a/MdeModulePkg/Universal/Disk/PartitionDxe/Partition.c
> +++ b/MdeModulePkg/Universal/Disk/PartitionDxe/Partition.c
> @@ -5,7 +5,7 @@
> MBR, and GPT partition schemes are supported.
>
> Copyright (c) 2018 Qualcomm Datacenter Technologies, Inc.
> -Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2006 - 2020, Intel Corporation. All rights reserved.<BR>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> **/
> @@ -39,7 +39,6 @@ EFI_DRIVER_BINDING_PROTOCOL gPartitionDriverBinding = {
> PARTITION_DETECT_ROUTINE mPartitionDetectRoutineTable[] = {
> PartitionInstallGptChildHandles,
> PartitionInstallMbrChildHandles,
> - PartitionInstallUdfChildHandles,
> NULL
> };
>
> @@ -189,6 +188,8 @@ PartitionDriverBindingStart (
> {
> EFI_STATUS Status;
> EFI_STATUS OpenStatus;
> + EFI_STATUS UdfStatus;
> + EFI_STATUS GptMbrStatus;
> EFI_BLOCK_IO_PROTOCOL *BlockIo;
> EFI_BLOCK_IO2_PROTOCOL *BlockIo2;
> EFI_DISK_IO_PROTOCOL *DiskIo;
> @@ -300,26 +301,47 @@ PartitionDriverBindingStart (
> if (BlockIo->Media->MediaPresent ||
> (BlockIo->Media->RemovableMedia && !BlockIo->Media->LogicalPartition)) {
> //
> - // Try for GPT, then legacy MBR partition types, and then UDF and El Torito.
> - // If the media supports a given partition type install child handles to
> - // represent the partitions described by the media.
> + // Try for UDF (El TOrito compatible) and GPT/MBR partition types.
> + // If the media supports a given partition type, it would install child handles
> + // to represent the partitions described by the media.
> + // Notes: GPT is conflicted with MBR. It would only install one of them to describe
> + // the partition. UDF (or El Torito) can exist with MBR, so need to check it along with
> + // GPT/MBR.
> //
> + UdfStatus = PartitionInstallUdfChildHandles (
> + This,
> + ControllerHandle,
> + DiskIo,
> + DiskIo2,
> + BlockIo,
> + BlockIo2,
> + ParentDevicePath
> + );
> +
> Routine = &mPartitionDetectRoutineTable[0];
> while (*Routine != NULL) {
> - Status = (*Routine) (
> - This,
> - ControllerHandle,
> - DiskIo,
> - DiskIo2,
> - BlockIo,
> - BlockIo2,
> - ParentDevicePath
> - );
> - if (!EFI_ERROR (Status) || Status == EFI_MEDIA_CHANGED || Status == EFI_NO_MEDIA) {
> + GptMbrStatus = (*Routine) (
> + This,
> + ControllerHandle,
> + DiskIo,
> + DiskIo2,
> + BlockIo,
> + BlockIo2,
> + ParentDevicePath
> + );
> + if (!EFI_ERROR (GptMbrStatus) || GptMbrStatus == EFI_MEDIA_CHANGED || GptMbrStatus == EFI_NO_MEDIA) {
> break;
> }
> Routine++;
> }
> +
> + if (!EFI_ERROR (UdfStatus) || !EFI_ERROR (GptMbrStatus)) {
> + Status = EFI_SUCCESS;
> + } else if (UdfStatus == EFI_MEDIA_CHANGED || GptMbrStatus == EFI_MEDIA_CHANGED) {
> + Status = EFI_MEDIA_CHANGED;
> + } else if (UdfStatus == EFI_NO_MEDIA || GptMbrStatus == EFI_NO_MEDIA) {
> + Status = EFI_NO_MEDIA;
> + }
> }
> //
> // In the case that the driver is already started (OpenStatus == EFI_ALREADY_STARTED),
> --
> 2.21.0.windows.1
next prev parent reply other threads:[~2020-06-24 8:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-24 5:56 [PATCH] MdeModulePkg/PartitionDxe: Seperate the Udf handler Gao, Zhichao
2020-06-24 8:32 ` Ni, Ray [this message]
2020-06-24 11:57 ` [edk2-devel] " Laszlo Ersek
2020-06-25 0:21 ` Ni, Ray
2020-06-25 9:02 ` Laszlo Ersek
2020-06-29 1:47 ` Gao, Zhichao
2020-06-29 2:42 ` Ni, Ray
2020-06-29 5:23 ` Gao, Zhichao
2020-07-02 9:42 ` Laszlo Ersek
2020-07-06 2:55 ` Gao, Zhichao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=734D49CCEBEEF84792F5B80ED585239D5C5D1BBB@SHSMSX104.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox