* [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
@ 2022-12-15 21:11 Sean Rhodes
2022-12-15 22:08 ` [edk2-devel] " Michael D Kinney
0 siblings, 1 reply; 8+ messages in thread
From: Sean Rhodes @ 2022-12-15 21:11 UTC (permalink / raw)
To: devel; +Cc: Sean Rhodes, Zhichao Gao, Ray Ni, Jian J Wang, Liming Gao
When set to true, the Logo is positioned according to the BGRT
specification, 38.2% from the top of the screen. When set to false,
no behaviour is changed and the logo is positioned centrally.
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
---
MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
MdeModulePkg/MdeModulePkg.dec | 6 ++++++
MdeModulePkg/MdeModulePkg.uni | 6 ++++++
4 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
index 8ab874d2da..48862d3207 100644
--- a/MdeModulePkg/Logo/Logo.c
+++ b/MdeModulePkg/Logo/Logo.c
@@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/HiiPackageList.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
typedef struct {
EFI_IMAGE_ID ImageId;
@@ -51,12 +52,14 @@ GetImage (
IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
IN OUT UINT32 *Instance,
OUT EFI_IMAGE_INPUT *Image,
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
OUT INTN *OffsetX,
OUT INTN *OffsetY
)
{
- UINT32 Current;
+ UINT32 Current;
+ EFI_STATUS Status;
if ((Instance == NULL) || (Image == NULL) ||
(Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
@@ -69,6 +72,29 @@ GetImage (
return EFI_NOT_FOUND;
}
+ if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
+ //
+ // Get current video resolution and text mode
+ //
+ Status = gBS->HandleProtocol (
+ gST->ConsoleOutHandle,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **)&GraphicsOutput
+ );
+ if (!EFI_ERROR (Status)) {
+ //
+ // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
+ // Y = (VerticalResolution - LogoHeight) / 2
+ // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
+ // OffsetY + Y = Y'
+ // OffsetY = Y' - Y = -0.118 * VerticalResolution
+ //
+ *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
+ *OffsetX = 0;
+ *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
+ }
+ }
+
(*Instance)++;
*Attribute = mLogos[Current].Attribute;
*OffsetX = mLogos[Current].OffsetX;
diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
index 41215d25d8..ce29950089 100644
--- a/MdeModulePkg/Logo/LogoDxe.inf
+++ b/MdeModulePkg/Logo/LogoDxe.inf
@@ -41,6 +41,7 @@
UefiBootServicesTableLib
UefiDriverEntryPoint
DebugLib
+ PcdLib
[Protocols]
gEfiHiiDatabaseProtocolGuid ## CONSUMES
@@ -48,6 +49,9 @@
gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
gEdkiiPlatformLogoProtocolGuid ## PRODUCES
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
+
[Depex]
gEfiHiiDatabaseProtocolGuid AND
gEfiHiiImageExProtocolGuid
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index be5e829ca9..c8bb51df3b 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -2102,6 +2102,12 @@
# @Prompt The shared bit mask when Intel Tdx is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
+ ## This PCD sets the position of the Boot Logo.
+ # TRUE - The Logo is positioned following the recommendations from Microsoft.
+ # FALSE - The logo is positioned in the center of the screen.
+ # @ Prompt This position of the boot logo
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
index 33ce9f6198..09c1ac1cc1 100644
--- a/MdeModulePkg/MdeModulePkg.uni
+++ b/MdeModulePkg/MdeModulePkg.uni
@@ -1338,3 +1338,9 @@
#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe Resizable BAR Capability Supported.<BR><BR>\n"
"TRUE - PCIe Resizable BAR Capability is supported.<BR>\n"
"FALSE - PCIe Resizable BAR Capability is not supported.<BR>"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot Logo"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the Logo. When set to true, the Logo is positioned following the recommendations"
+ " from Microsoft, 38.2% from the top of the screen."
+
--
2.37.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
2022-12-15 21:11 [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo Sean Rhodes
@ 2022-12-15 22:08 ` Michael D Kinney
2022-12-15 22:17 ` Sean Rhodes
0 siblings, 1 reply; 8+ messages in thread
From: Michael D Kinney @ 2022-12-15 22:08 UTC (permalink / raw)
To: devel@edk2.groups.io, Rhodes, Sean, Kinney, Michael D
Cc: Gao, Zhichao, Ni, Ray, Wang, Jian J, Gao, Liming
Hi Sean,
A couple comments related to the PCD type below.
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean Rhodes
> Sent: Thursday, December 15, 2022 1:12 PM
> To: devel@edk2.groups.io
> Cc: Rhodes, Sean <sean@starlabs.systems>; Gao, Zhichao <zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang, Jian J
> <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>
> Subject: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
>
> When set to true, the Logo is positioned according to the BGRT
> specification, 38.2% from the top of the screen. When set to false,
> no behaviour is changed and the logo is positioned centrally.
>
> Cc: Zhichao Gao <zhichao.gao@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> ---
> MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> 4 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> index 8ab874d2da..48862d3207 100644
> --- a/MdeModulePkg/Logo/Logo.c
> +++ b/MdeModulePkg/Logo/Logo.c
> @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #include <Protocol/HiiPackageList.h>
>
> #include <Library/UefiBootServicesTableLib.h>
>
> #include <Library/DebugLib.h>
>
> +#include <Library/PcdLib.h>
>
>
>
> typedef struct {
>
> EFI_IMAGE_ID ImageId;
>
> @@ -51,12 +52,14 @@ GetImage (
> IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
>
> IN OUT UINT32 *Instance,
>
> OUT EFI_IMAGE_INPUT *Image,
>
> + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
>
> OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
>
> OUT INTN *OffsetX,
>
> OUT INTN *OffsetY
>
> )
>
> {
>
> - UINT32 Current;
>
> + UINT32 Current;
>
> + EFI_STATUS Status;
>
>
>
> if ((Instance == NULL) || (Image == NULL) ||
>
> (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
>
> @@ -69,6 +72,29 @@ GetImage (
> return EFI_NOT_FOUND;
>
> }
>
>
>
> + if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
Should be PcdGetBool(). The only time FixedPcdGetxxx() is required is
if the PCD value is being used to initialize a struct where the value
is needed at build time. This allows the PCD type to be flexible and
can be set in platform scope in the DSC file.
>
> + //
>
> + // Get current video resolution and text mode
>
> + //
>
> + Status = gBS->HandleProtocol (
>
> + gST->ConsoleOutHandle,
>
> + &gEfiGraphicsOutputProtocolGuid,
>
> + (VOID **)&GraphicsOutput
>
> + );
>
> + if (!EFI_ERROR (Status)) {
>
> + //
>
> + // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
>
> + // Y = (VerticalResolution - LogoHeight) / 2
>
> + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
>
> + // OffsetY + Y = Y'
>
> + // OffsetY = Y' - Y = -0.118 * VerticalResolution
>
> + //
>
> + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
>
> + *OffsetX = 0;
>
> + *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
>
> + }
>
> + }
>
> +
>
> (*Instance)++;
>
> *Attribute = mLogos[Current].Attribute;
>
> *OffsetX = mLogos[Current].OffsetX;
>
> diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
> index 41215d25d8..ce29950089 100644
> --- a/MdeModulePkg/Logo/LogoDxe.inf
> +++ b/MdeModulePkg/Logo/LogoDxe.inf
> @@ -41,6 +41,7 @@
> UefiBootServicesTableLib
>
> UefiDriverEntryPoint
>
> DebugLib
>
> + PcdLib
>
>
>
> [Protocols]
>
> gEfiHiiDatabaseProtocolGuid ## CONSUMES
>
> @@ -48,6 +49,9 @@
> gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
>
> gEdkiiPlatformLogoProtocolGuid ## PRODUCES
>
>
>
> +[Pcd]
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
>
> +
>
> [Depex]
>
> gEfiHiiDatabaseProtocolGuid AND
>
> gEfiHiiImageExProtocolGuid
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
> index be5e829ca9..c8bb51df3b 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -2102,6 +2102,12 @@
> # @Prompt The shared bit mask when Intel Tdx is enabled.
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
>
>
>
> + ## This PCD sets the position of the Boot Logo.
>
> + # TRUE - The Logo is positioned following the recommendations from Microsoft.
>
> + # FALSE - The logo is positioned in the center of the screen.
>
> + # @ Prompt This position of the boot logo
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
Which PCD section is this in? This PCD should support all PCD types so
it can allow Fixed or Patchable or Dynmaic PCD types.
>
> +
>
> [PcdsPatchableInModule]
>
> ## Specify memory size with page number for PEI code when
>
> # Loading Module at Fixed Address feature is enabled.
>
> diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
> index 33ce9f6198..09c1ac1cc1 100644
> --- a/MdeModulePkg/MdeModulePkg.uni
> +++ b/MdeModulePkg/MdeModulePkg.uni
> @@ -1338,3 +1338,9 @@
> #string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe
> Resizable BAR Capability Supported.<BR><BR>\n"
>
> "TRUE - PCIe Resizable BAR
> Capability is supported.<BR>\n"
>
> "FALSE - PCIe Resizable BAR
> Capability is not supported.<BR>"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot
> Logo"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the
> Logo. When set to true, the Logo is positioned following the recommendations"
>
> + " from Microsoft, 38.2% from
> the top of the screen."
>
> +
>
> --
> 2.37.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97479): https://edk2.groups.io/g/devel/message/97479
> Mute This Topic: https://groups.io/mt/95697776/1643496
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [michael.d.kinney@intel.com]
> -=-=-=-=-=-=
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
2022-12-15 22:08 ` [edk2-devel] " Michael D Kinney
@ 2022-12-15 22:17 ` Sean Rhodes
2022-12-15 22:54 ` Michael D Kinney
0 siblings, 1 reply; 8+ messages in thread
From: Sean Rhodes @ 2022-12-15 22:17 UTC (permalink / raw)
To: Kinney, Michael D
Cc: devel@edk2.groups.io, Gao, Zhichao, Ni, Ray, Wang, Jian J,
Gao, Liming
[-- Attachment #1: Type: text/plain, Size: 7645 bytes --]
Hi Mike
Thank you; changed to PcdGetBool.
It's in `[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic,
PcdsDynamicEx]` - is that not right?
Thanks
Sean
On Thu, 15 Dec 2022 at 22:09, Kinney, Michael D <michael.d.kinney@intel.com>
wrote:
> Hi Sean,
>
> A couple comments related to the PCD type below.
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> Rhodes
> > Sent: Thursday, December 15, 2022 1:12 PM
> > To: devel@edk2.groups.io
> > Cc: Rhodes, Sean <sean@starlabs.systems>; Gao, Zhichao <
> zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang, Jian J
> > <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>
> > Subject: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control
> the position of the Logo
> >
> > When set to true, the Logo is positioned according to the BGRT
> > specification, 38.2% from the top of the screen. When set to false,
> > no behaviour is changed and the logo is positioned centrally.
> >
> > Cc: Zhichao Gao <zhichao.gao@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> > ---
> > MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> > MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> > MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> > MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> > 4 files changed, 43 insertions(+), 1 deletion(-)
> >
> > diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> > index 8ab874d2da..48862d3207 100644
> > --- a/MdeModulePkg/Logo/Logo.c
> > +++ b/MdeModulePkg/Logo/Logo.c
> > @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > #include <Protocol/HiiPackageList.h>
> >
> > #include <Library/UefiBootServicesTableLib.h>
> >
> > #include <Library/DebugLib.h>
> >
> > +#include <Library/PcdLib.h>
> >
> >
> >
> > typedef struct {
> >
> > EFI_IMAGE_ID ImageId;
> >
> > @@ -51,12 +52,14 @@ GetImage (
> > IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
> >
> > IN OUT UINT32 *Instance,
> >
> > OUT EFI_IMAGE_INPUT *Image,
> >
> > + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
> >
> > OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
> >
> > OUT INTN *OffsetX,
> >
> > OUT INTN *OffsetY
> >
> > )
> >
> > {
> >
> > - UINT32 Current;
> >
> > + UINT32 Current;
> >
> > + EFI_STATUS Status;
> >
> >
> >
> > if ((Instance == NULL) || (Image == NULL) ||
> >
> > (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
> >
> > @@ -69,6 +72,29 @@ GetImage (
> > return EFI_NOT_FOUND;
> >
> > }
> >
> >
> >
> > + if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
>
> Should be PcdGetBool(). The only time FixedPcdGetxxx() is required is
> if the PCD value is being used to initialize a struct where the value
> is needed at build time. This allows the PCD type to be flexible and
> can be set in platform scope in the DSC file.
>
> >
> > + //
> >
> > + // Get current video resolution and text mode
> >
> > + //
> >
> > + Status = gBS->HandleProtocol (
> >
> > + gST->ConsoleOutHandle,
> >
> > + &gEfiGraphicsOutputProtocolGuid,
> >
> > + (VOID **)&GraphicsOutput
> >
> > + );
> >
> > + if (!EFI_ERROR (Status)) {
> >
> > + //
> >
> > + // Center of LOGO is in the vertical position 38.2% when
> PcdBootLogoOnlyEnable is TRUE
> >
> > + // Y = (VerticalResolution - LogoHeight) / 2
> >
> > + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
> >
> > + // OffsetY + Y = Y'
> >
> > + // OffsetY = Y' - Y = -0.118 * VerticalResolution
> >
> > + //
> >
> > + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
> >
> > + *OffsetX = 0;
> >
> > + *OffsetY = -118 *
> (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
> >
> > + }
> >
> > + }
> >
> > +
> >
> > (*Instance)++;
> >
> > *Attribute = mLogos[Current].Attribute;
> >
> > *OffsetX = mLogos[Current].OffsetX;
> >
> > diff --git a/MdeModulePkg/Logo/LogoDxe.inf
> b/MdeModulePkg/Logo/LogoDxe.inf
> > index 41215d25d8..ce29950089 100644
> > --- a/MdeModulePkg/Logo/LogoDxe.inf
> > +++ b/MdeModulePkg/Logo/LogoDxe.inf
> > @@ -41,6 +41,7 @@
> > UefiBootServicesTableLib
> >
> > UefiDriverEntryPoint
> >
> > DebugLib
> >
> > + PcdLib
> >
> >
> >
> > [Protocols]
> >
> > gEfiHiiDatabaseProtocolGuid ## CONSUMES
> >
> > @@ -48,6 +49,9 @@
> > gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
> >
> > gEdkiiPlatformLogoProtocolGuid ## PRODUCES
> >
> >
> >
> > +[Pcd]
> >
> > + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ##
> CONSUMES
> >
> > +
> >
> > [Depex]
> >
> > gEfiHiiDatabaseProtocolGuid AND
> >
> > gEfiHiiImageExProtocolGuid
> >
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec
> > index be5e829ca9..c8bb51df3b 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -2102,6 +2102,12 @@
> > # @Prompt The shared bit mask when Intel Tdx is enabled.
> >
> >
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
> >
> >
> >
> > + ## This PCD sets the position of the Boot Logo.
> >
> > + # TRUE - The Logo is positioned following the recommendations from
> Microsoft.
> >
> > + # FALSE - The logo is positioned in the center of the screen.
> >
> > + # @ Prompt This position of the boot logo
> >
> > +
> gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
>
> Which PCD section is this in? This PCD should support all PCD types so
> it can allow Fixed or Patchable or Dynmaic PCD types.
>
> >
> > +
> >
> > [PcdsPatchableInModule]
> >
> > ## Specify memory size with page number for PEI code when
> >
> > # Loading Module at Fixed Address feature is enabled.
> >
> > diff --git a/MdeModulePkg/MdeModulePkg.uni
> b/MdeModulePkg/MdeModulePkg.uni
> > index 33ce9f6198..09c1ac1cc1 100644
> > --- a/MdeModulePkg/MdeModulePkg.uni
> > +++ b/MdeModulePkg/MdeModulePkg.uni
> > @@ -1338,3 +1338,9 @@
> > #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP
> #language en-US "Indicates if the PCIe
> > Resizable BAR Capability Supported.<BR><BR>\n"
> >
> >
> "TRUE - PCIe Resizable BAR
> > Capability is supported.<BR>\n"
> >
> >
> "FALSE - PCIe Resizable BAR
> > Capability is not supported.<BR>"
> >
> > +
> >
> > +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT
> #language en-US "The position of the Boot
> > Logo"
> >
> > +
> >
> > +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP
> #language en-US "Sets the position of the
> > Logo. When set to true, the Logo is positioned following the
> recommendations"
> >
> > +
> " from Microsoft, 38.2% from
> > the top of the screen."
> >
> > +
> >
> > --
> > 2.37.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#97479): https://edk2.groups.io/g/devel/message/97479
> > Mute This Topic: https://groups.io/mt/95697776/1643496
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [
> michael.d.kinney@intel.com]
> > -=-=-=-=-=-=
> >
>
>
[-- Attachment #2: Type: text/html, Size: 12403 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
2022-12-15 22:17 ` Sean Rhodes
@ 2022-12-15 22:54 ` Michael D Kinney
2022-12-16 8:57 ` Sean Rhodes
0 siblings, 1 reply; 8+ messages in thread
From: Michael D Kinney @ 2022-12-15 22:54 UTC (permalink / raw)
To: Rhodes, Sean, Kinney, Michael D
Cc: devel@edk2.groups.io, Gao, Zhichao, Ni, Ray, Wang, Jian J,
Gao, Liming
[-- Attachment #1: Type: text/plain, Size: 8958 bytes --]
Hi Sean,
Yes, that is the correct section. Hard to tell from patch email alone.
There is a git config that can always include the name of the section of the INF/DEC/DSC/FDF file where a change is made.
Can make it a bit easier to review.
https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt-git-guide-for-edk2-contributors-and-maintainers#contrib-05
Specifically this one I think:
git config diff.ini.xfuncname '^\[[A-Za-z0-9_., ]+]'
Mike
From: Sean Rhodes <sean@starlabs.systems>
Sent: Thursday, December 15, 2022 2:17 PM
To: Kinney, Michael D <michael.d.kinney@intel.com>
Cc: devel@edk2.groups.io; Gao, Zhichao <zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>
Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
Hi Mike
Thank you; changed to PcdGetBool.
It's in `[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]` - is that not right?
Thanks
Sean
On Thu, 15 Dec 2022 at 22:09, Kinney, Michael D <michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>> wrote:
Hi Sean,
A couple comments related to the PCD type below.
Mike
> -----Original Message-----
> From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> <devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of Sean Rhodes
> Sent: Thursday, December 15, 2022 1:12 PM
> To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
> Cc: Rhodes, Sean <sean@starlabs.systems<mailto:sean@starlabs.systems>>; Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Wang, Jian J
> <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Gao, Liming <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
> Subject: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
>
> When set to true, the Logo is positioned according to the BGRT
> specification, 38.2% from the top of the screen. When set to false,
> no behaviour is changed and the logo is positioned centrally.
>
> Cc: Zhichao Gao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>
> Cc: Ray Ni <ray.ni@intel.com<mailto:ray.ni@intel.com>>
> Cc: Jian J Wang <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>
> Cc: Liming Gao <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
> Signed-off-by: Sean Rhodes <sean@starlabs.systems<mailto:sean@starlabs.systems>>
> ---
> MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> 4 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> index 8ab874d2da..48862d3207 100644
> --- a/MdeModulePkg/Logo/Logo.c
> +++ b/MdeModulePkg/Logo/Logo.c
> @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #include <Protocol/HiiPackageList.h>
>
> #include <Library/UefiBootServicesTableLib.h>
>
> #include <Library/DebugLib.h>
>
> +#include <Library/PcdLib.h>
>
>
>
> typedef struct {
>
> EFI_IMAGE_ID ImageId;
>
> @@ -51,12 +52,14 @@ GetImage (
> IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
>
> IN OUT UINT32 *Instance,
>
> OUT EFI_IMAGE_INPUT *Image,
>
> + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
>
> OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
>
> OUT INTN *OffsetX,
>
> OUT INTN *OffsetY
>
> )
>
> {
>
> - UINT32 Current;
>
> + UINT32 Current;
>
> + EFI_STATUS Status;
>
>
>
> if ((Instance == NULL) || (Image == NULL) ||
>
> (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
>
> @@ -69,6 +72,29 @@ GetImage (
> return EFI_NOT_FOUND;
>
> }
>
>
>
> + if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
Should be PcdGetBool(). The only time FixedPcdGetxxx() is required is
if the PCD value is being used to initialize a struct where the value
is needed at build time. This allows the PCD type to be flexible and
can be set in platform scope in the DSC file.
>
> + //
>
> + // Get current video resolution and text mode
>
> + //
>
> + Status = gBS->HandleProtocol (
>
> + gST->ConsoleOutHandle,
>
> + &gEfiGraphicsOutputProtocolGuid,
>
> + (VOID **)&GraphicsOutput
>
> + );
>
> + if (!EFI_ERROR (Status)) {
>
> + //
>
> + // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
>
> + // Y = (VerticalResolution - LogoHeight) / 2
>
> + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
>
> + // OffsetY + Y = Y'
>
> + // OffsetY = Y' - Y = -0.118 * VerticalResolution
>
> + //
>
> + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
>
> + *OffsetX = 0;
>
> + *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
>
> + }
>
> + }
>
> +
>
> (*Instance)++;
>
> *Attribute = mLogos[Current].Attribute;
>
> *OffsetX = mLogos[Current].OffsetX;
>
> diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
> index 41215d25d8..ce29950089 100644
> --- a/MdeModulePkg/Logo/LogoDxe.inf
> +++ b/MdeModulePkg/Logo/LogoDxe.inf
> @@ -41,6 +41,7 @@
> UefiBootServicesTableLib
>
> UefiDriverEntryPoint
>
> DebugLib
>
> + PcdLib
>
>
>
> [Protocols]
>
> gEfiHiiDatabaseProtocolGuid ## CONSUMES
>
> @@ -48,6 +49,9 @@
> gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
>
> gEdkiiPlatformLogoProtocolGuid ## PRODUCES
>
>
>
> +[Pcd]
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
>
> +
>
> [Depex]
>
> gEfiHiiDatabaseProtocolGuid AND
>
> gEfiHiiImageExProtocolGuid
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
> index be5e829ca9..c8bb51df3b 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -2102,6 +2102,12 @@
> # @Prompt The shared bit mask when Intel Tdx is enabled.
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
>
>
>
> + ## This PCD sets the position of the Boot Logo.
>
> + # TRUE - The Logo is positioned following the recommendations from Microsoft.
>
> + # FALSE - The logo is positioned in the center of the screen.
>
> + # @ Prompt This position of the boot logo
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
Which PCD section is this in? This PCD should support all PCD types so
it can allow Fixed or Patchable or Dynmaic PCD types.
>
> +
>
> [PcdsPatchableInModule]
>
> ## Specify memory size with page number for PEI code when
>
> # Loading Module at Fixed Address feature is enabled.
>
> diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
> index 33ce9f6198..09c1ac1cc1 100644
> --- a/MdeModulePkg/MdeModulePkg.uni
> +++ b/MdeModulePkg/MdeModulePkg.uni
> @@ -1338,3 +1338,9 @@
> #string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe
> Resizable BAR Capability Supported.<BR><BR>\n"
>
> "TRUE - PCIe Resizable BAR
> Capability is supported.<BR>\n"
>
> "FALSE - PCIe Resizable BAR
> Capability is not supported.<BR>"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot
> Logo"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the
> Logo. When set to true, the Logo is positioned following the recommendations"
>
> + " from Microsoft, 38.2% from
> the top of the screen."
>
> +
>
> --
> 2.37.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97479): https://edk2.groups.io/g/devel/message/97479
> Mute This Topic: https://groups.io/mt/95697776/1643496
> Group Owner: devel+owner@edk2.groups.io<mailto:devel%2Bowner@edk2.groups.io>
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>]
> -=-=-=-=-=-=
>
[-- Attachment #2: Type: text/html, Size: 56247 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
2022-12-15 22:54 ` Michael D Kinney
@ 2022-12-16 8:57 ` Sean Rhodes
2022-12-16 15:59 ` Jeshua Smith
0 siblings, 1 reply; 8+ messages in thread
From: Sean Rhodes @ 2022-12-16 8:57 UTC (permalink / raw)
To: devel, michael.d.kinney
[-- Attachment #1: Type: text/plain, Size: 8804 bytes --]
Hi Mike
Thanks; didn't work but I'll have a play wth it!
Sean
On Thu, 15 Dec 2022 at 22:55, Michael D Kinney <michael.d.kinney@intel.com>
wrote:
> Hi Sean,
>
>
>
> Yes, that is the correct section. Hard to tell from patch email alone.
>
>
>
> There is a git config that can always include the name of the section of
> the INF/DEC/DSC/FDF file where a change is made.
>
> Can make it a bit easier to review.
>
>
>
>
> https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt-git-guide-for-edk2-contributors-and-maintainers#contrib-05
>
>
>
> Specifically this one I think:
>
>
>
> git config diff.ini.xfuncname '^\[[A-Za-z0-9_., ]+]'
>
>
>
> Mike
>
>
>
> *From:* Sean Rhodes <sean@starlabs.systems>
> *Sent:* Thursday, December 15, 2022 2:17 PM
> *To:* Kinney, Michael D <michael.d.kinney@intel.com>
> *Cc:* devel@edk2.groups.io; Gao, Zhichao <zhichao.gao@intel.com>; Ni, Ray
> <ray.ni@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming <
> gaoliming@byosoft.com.cn>
> *Subject:* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to
> control the position of the Logo
>
>
>
> Hi Mike
>
>
>
> Thank you; changed to PcdGetBool.
>
>
>
> It's in `[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic,
> PcdsDynamicEx]` - is that not right?
>
>
>
> Thanks
>
>
>
> Sean
>
>
>
> On Thu, 15 Dec 2022 at 22:09, Kinney, Michael D <
> michael.d.kinney@intel.com> wrote:
>
> Hi Sean,
>
> A couple comments related to the PCD type below.
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> Rhodes
> > Sent: Thursday, December 15, 2022 1:12 PM
> > To: devel@edk2.groups.io
> > Cc: Rhodes, Sean <sean@starlabs.systems>; Gao, Zhichao <
> zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang, Jian J
> > <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>
> > Subject: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control
> the position of the Logo
> >
> > When set to true, the Logo is positioned according to the BGRT
> > specification, 38.2% from the top of the screen. When set to false,
> > no behaviour is changed and the logo is positioned centrally.
> >
> > Cc: Zhichao Gao <zhichao.gao@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> > ---
> > MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> > MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> > MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> > MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> > 4 files changed, 43 insertions(+), 1 deletion(-)
> >
> > diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> > index 8ab874d2da..48862d3207 100644
> > --- a/MdeModulePkg/Logo/Logo.c
> > +++ b/MdeModulePkg/Logo/Logo.c
> > @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> > #include <Protocol/HiiPackageList.h>
> >
> > #include <Library/UefiBootServicesTableLib.h>
> >
> > #include <Library/DebugLib.h>
> >
> > +#include <Library/PcdLib.h>
> >
> >
> >
> > typedef struct {
> >
> > EFI_IMAGE_ID ImageId;
> >
> > @@ -51,12 +52,14 @@ GetImage (
> > IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
> >
> > IN OUT UINT32 *Instance,
> >
> > OUT EFI_IMAGE_INPUT *Image,
> >
> > + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
> >
> > OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
> >
> > OUT INTN *OffsetX,
> >
> > OUT INTN *OffsetY
> >
> > )
> >
> > {
> >
> > - UINT32 Current;
> >
> > + UINT32 Current;
> >
> > + EFI_STATUS Status;
> >
> >
> >
> > if ((Instance == NULL) || (Image == NULL) ||
> >
> > (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
> >
> > @@ -69,6 +72,29 @@ GetImage (
> > return EFI_NOT_FOUND;
> >
> > }
> >
> >
> >
> > + if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
>
> Should be PcdGetBool(). The only time FixedPcdGetxxx() is required is
> if the PCD value is being used to initialize a struct where the value
> is needed at build time. This allows the PCD type to be flexible and
> can be set in platform scope in the DSC file.
>
> >
> > + //
> >
> > + // Get current video resolution and text mode
> >
> > + //
> >
> > + Status = gBS->HandleProtocol (
> >
> > + gST->ConsoleOutHandle,
> >
> > + &gEfiGraphicsOutputProtocolGuid,
> >
> > + (VOID **)&GraphicsOutput
> >
> > + );
> >
> > + if (!EFI_ERROR (Status)) {
> >
> > + //
> >
> > + // Center of LOGO is in the vertical position 38.2% when
> PcdBootLogoOnlyEnable is TRUE
> >
> > + // Y = (VerticalResolution - LogoHeight) / 2
> >
> > + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
> >
> > + // OffsetY + Y = Y'
> >
> > + // OffsetY = Y' - Y = -0.118 * VerticalResolution
> >
> > + //
> >
> > + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
> >
> > + *OffsetX = 0;
> >
> > + *OffsetY = -118 *
> (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
> >
> > + }
> >
> > + }
> >
> > +
> >
> > (*Instance)++;
> >
> > *Attribute = mLogos[Current].Attribute;
> >
> > *OffsetX = mLogos[Current].OffsetX;
> >
> > diff --git a/MdeModulePkg/Logo/LogoDxe.inf
> b/MdeModulePkg/Logo/LogoDxe.inf
> > index 41215d25d8..ce29950089 100644
> > --- a/MdeModulePkg/Logo/LogoDxe.inf
> > +++ b/MdeModulePkg/Logo/LogoDxe.inf
> > @@ -41,6 +41,7 @@
> > UefiBootServicesTableLib
> >
> > UefiDriverEntryPoint
> >
> > DebugLib
> >
> > + PcdLib
> >
> >
> >
> > [Protocols]
> >
> > gEfiHiiDatabaseProtocolGuid ## CONSUMES
> >
> > @@ -48,6 +49,9 @@
> > gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
> >
> > gEdkiiPlatformLogoProtocolGuid ## PRODUCES
> >
> >
> >
> > +[Pcd]
> >
> > + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ##
> CONSUMES
> >
> > +
> >
> > [Depex]
> >
> > gEfiHiiDatabaseProtocolGuid AND
> >
> > gEfiHiiImageExProtocolGuid
> >
> > diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec
> > index be5e829ca9..c8bb51df3b 100644
> > --- a/MdeModulePkg/MdeModulePkg.dec
> > +++ b/MdeModulePkg/MdeModulePkg.dec
> > @@ -2102,6 +2102,12 @@
> > # @Prompt The shared bit mask when Intel Tdx is enabled.
> >
> >
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
> >
> >
> >
> > + ## This PCD sets the position of the Boot Logo.
> >
> > + # TRUE - The Logo is positioned following the recommendations from
> Microsoft.
> >
> > + # FALSE - The logo is positioned in the center of the screen.
> >
> > + # @ Prompt This position of the boot logo
> >
> > +
> gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
>
> Which PCD section is this in? This PCD should support all PCD types so
> it can allow Fixed or Patchable or Dynmaic PCD types.
>
> >
> > +
> >
> > [PcdsPatchableInModule]
> >
> > ## Specify memory size with page number for PEI code when
> >
> > # Loading Module at Fixed Address feature is enabled.
> >
> > diff --git a/MdeModulePkg/MdeModulePkg.uni
> b/MdeModulePkg/MdeModulePkg.uni
> > index 33ce9f6198..09c1ac1cc1 100644
> > --- a/MdeModulePkg/MdeModulePkg.uni
> > +++ b/MdeModulePkg/MdeModulePkg.uni
> > @@ -1338,3 +1338,9 @@
> > #string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP
> #language en-US "Indicates if the PCIe
> > Resizable BAR Capability Supported.<BR><BR>\n"
> >
> >
> "TRUE - PCIe Resizable BAR
> > Capability is supported.<BR>\n"
> >
> >
> "FALSE - PCIe Resizable BAR
> > Capability is not supported.<BR>"
> >
> > +
> >
> > +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT
> #language en-US "The position of the Boot
> > Logo"
> >
> > +
> >
> > +#string
> STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP
> #language en-US "Sets the position of the
> > Logo. When set to true, the Logo is positioned following the
> recommendations"
> >
> > +
> " from Microsoft, 38.2% from
> > the top of the screen."
> >
> > +
> >
> > --
> > 2.37.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#97479): https://edk2.groups.io/g/devel/message/97479
> > Mute This Topic: https://groups.io/mt/95697776/1643496
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [
> michael.d.kinney@intel.com]
> > -=-=-=-=-=-=
> >
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 16788 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
2022-12-16 8:57 ` Sean Rhodes
@ 2022-12-16 15:59 ` Jeshua Smith
0 siblings, 0 replies; 8+ messages in thread
From: Jeshua Smith @ 2022-12-16 15:59 UTC (permalink / raw)
To: devel@edk2.groups.io, sean@starlabs.systems,
michael.d.kinney@intel.com
[-- Attachment #1: Type: text/plain, Size: 9880 bytes --]
I haven’t tried it, but farther down on the page steps 9 and 10 look like they’re related to the option Mike suggested, so they might be required for it to work?
From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean Rhodes via groups.io
Sent: Friday, December 16, 2022 1:58 AM
To: devel@edk2.groups.io; michael.d.kinney@intel.com
Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
External email: Use caution opening links or attachments
Hi Mike
Thanks; didn't work but I'll have a play wth it!
Sean
On Thu, 15 Dec 2022 at 22:55, Michael D Kinney <michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>> wrote:
Hi Sean,
Yes, that is the correct section. Hard to tell from patch email alone.
There is a git config that can always include the name of the section of the INF/DEC/DSC/FDF file where a change is made.
Can make it a bit easier to review.
https://github.com/tianocore/tianocore.github.io/wiki/Laszlo's-unkempt-git-guide-for-edk2-contributors-and-maintainers#contrib-05
Specifically this one I think:
git config diff.ini.xfuncname '^\[[A-Za-z0-9_., ]+]'
Mike
From: Sean Rhodes <sean@starlabs.systems<mailto:sean@starlabs.systems>>
Sent: Thursday, December 15, 2022 2:17 PM
To: Kinney, Michael D <michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>>
Cc: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Gao, Liming <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
Hi Mike
Thank you; changed to PcdGetBool.
It's in `[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]` - is that not right?
Thanks
Sean
On Thu, 15 Dec 2022 at 22:09, Kinney, Michael D <michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>> wrote:
Hi Sean,
A couple comments related to the PCD type below.
Mike
> -----Original Message-----
> From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> <devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of Sean Rhodes
> Sent: Thursday, December 15, 2022 1:12 PM
> To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>
> Cc: Rhodes, Sean <sean@starlabs.systems<mailto:sean@starlabs.systems>>; Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Wang, Jian J
> <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Gao, Liming <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
> Subject: [edk2-devel] [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
>
> When set to true, the Logo is positioned according to the BGRT
> specification, 38.2% from the top of the screen. When set to false,
> no behaviour is changed and the logo is positioned centrally.
>
> Cc: Zhichao Gao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>
> Cc: Ray Ni <ray.ni@intel.com<mailto:ray.ni@intel.com>>
> Cc: Jian J Wang <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>
> Cc: Liming Gao <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
> Signed-off-by: Sean Rhodes <sean@starlabs.systems<mailto:sean@starlabs.systems>>
> ---
> MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
> MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
> MdeModulePkg/MdeModulePkg.dec | 6 ++++++
> MdeModulePkg/MdeModulePkg.uni | 6 ++++++
> 4 files changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
> index 8ab874d2da..48862d3207 100644
> --- a/MdeModulePkg/Logo/Logo.c
> +++ b/MdeModulePkg/Logo/Logo.c
> @@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
> #include <Protocol/HiiPackageList.h>
>
> #include <Library/UefiBootServicesTableLib.h>
>
> #include <Library/DebugLib.h>
>
> +#include <Library/PcdLib.h>
>
>
>
> typedef struct {
>
> EFI_IMAGE_ID ImageId;
>
> @@ -51,12 +52,14 @@ GetImage (
> IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
>
> IN OUT UINT32 *Instance,
>
> OUT EFI_IMAGE_INPUT *Image,
>
> + EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
>
> OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
>
> OUT INTN *OffsetX,
>
> OUT INTN *OffsetY
>
> )
>
> {
>
> - UINT32 Current;
>
> + UINT32 Current;
>
> + EFI_STATUS Status;
>
>
>
> if ((Instance == NULL) || (Image == NULL) ||
>
> (Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
>
> @@ -69,6 +72,29 @@ GetImage (
> return EFI_NOT_FOUND;
>
> }
>
>
>
> + if (FixedPcdGetBool (PcdFollowMicrosoftRecommended)) {
Should be PcdGetBool(). The only time FixedPcdGetxxx() is required is
if the PCD value is being used to initialize a struct where the value
is needed at build time. This allows the PCD type to be flexible and
can be set in platform scope in the DSC file.
>
> + //
>
> + // Get current video resolution and text mode
>
> + //
>
> + Status = gBS->HandleProtocol (
>
> + gST->ConsoleOutHandle,
>
> + &gEfiGraphicsOutputProtocolGuid,
>
> + (VOID **)&GraphicsOutput
>
> + );
>
> + if (!EFI_ERROR (Status)) {
>
> + //
>
> + // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
>
> + // Y = (VerticalResolution - LogoHeight) / 2
>
> + // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
>
> + // OffsetY + Y = Y'
>
> + // OffsetY = Y' - Y = -0.118 * VerticalResolution
>
> + //
>
> + *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
>
> + *OffsetX = 0;
>
> + *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
>
> + }
>
> + }
>
> +
>
> (*Instance)++;
>
> *Attribute = mLogos[Current].Attribute;
>
> *OffsetX = mLogos[Current].OffsetX;
>
> diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
> index 41215d25d8..ce29950089 100644
> --- a/MdeModulePkg/Logo/LogoDxe.inf
> +++ b/MdeModulePkg/Logo/LogoDxe.inf
> @@ -41,6 +41,7 @@
> UefiBootServicesTableLib
>
> UefiDriverEntryPoint
>
> DebugLib
>
> + PcdLib
>
>
>
> [Protocols]
>
> gEfiHiiDatabaseProtocolGuid ## CONSUMES
>
> @@ -48,6 +49,9 @@
> gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
>
> gEdkiiPlatformLogoProtocolGuid ## PRODUCES
>
>
>
> +[Pcd]
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
>
> +
>
> [Depex]
>
> gEfiHiiDatabaseProtocolGuid AND
>
> gEfiHiiImageExProtocolGuid
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
> index be5e829ca9..c8bb51df3b 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -2102,6 +2102,12 @@
> # @Prompt The shared bit mask when Intel Tdx is enabled.
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
>
>
>
> + ## This PCD sets the position of the Boot Logo.
>
> + # TRUE - The Logo is positioned following the recommendations from Microsoft.
>
> + # FALSE - The logo is positioned in the center of the screen.
>
> + # @ Prompt This position of the boot logo
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
Which PCD section is this in? This PCD should support all PCD types so
it can allow Fixed or Patchable or Dynmaic PCD types.
>
> +
>
> [PcdsPatchableInModule]
>
> ## Specify memory size with page number for PEI code when
>
> # Loading Module at Fixed Address feature is enabled.
>
> diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
> index 33ce9f6198..09c1ac1cc1 100644
> --- a/MdeModulePkg/MdeModulePkg.uni
> +++ b/MdeModulePkg/MdeModulePkg.uni
> @@ -1338,3 +1338,9 @@
> #string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe
> Resizable BAR Capability Supported.<BR><BR>\n"
>
> "TRUE - PCIe Resizable BAR
> Capability is supported.<BR>\n"
>
> "FALSE - PCIe Resizable BAR
> Capability is not supported.<BR>"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot
> Logo"
>
> +
>
> +#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the
> Logo. When set to true, the Logo is positioned following the recommendations"
>
> + " from Microsoft, 38.2% from
> the top of the screen."
>
> +
>
> --
> 2.37.2
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97479): https://edk2.groups.io/g/devel/message/97479
> Mute This Topic: https://groups.io/mt/95697776/1643496
> Group Owner: devel+owner@edk2.groups.io<mailto:devel%2Bowner@edk2.groups.io>
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>]
> -=-=-=-=-=-=
>
[-- Attachment #2: Type: text/html, Size: 23010 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
@ 2022-12-16 8:56 Sean Rhodes
0 siblings, 0 replies; 8+ messages in thread
From: Sean Rhodes @ 2022-12-16 8:56 UTC (permalink / raw)
To: devel; +Cc: Sean Rhodes, Zhichao Gao, Ray Ni, Jian J Wang, Liming Gao
When set to true, the Logo is positioned according to the BGRT
specification, 38.2% from the top of the screen. When set to false,
no behaviour is changed and the logo is positioned centrally.
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
---
MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
MdeModulePkg/MdeModulePkg.dec | 6 ++++++
MdeModulePkg/MdeModulePkg.uni | 6 ++++++
4 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
index 8ab874d2da..96e34b2011 100644
--- a/MdeModulePkg/Logo/Logo.c
+++ b/MdeModulePkg/Logo/Logo.c
@@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/HiiPackageList.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
typedef struct {
EFI_IMAGE_ID ImageId;
@@ -51,12 +52,14 @@ GetImage (
IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
IN OUT UINT32 *Instance,
OUT EFI_IMAGE_INPUT *Image,
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
OUT INTN *OffsetX,
OUT INTN *OffsetY
)
{
- UINT32 Current;
+ UINT32 Current;
+ EFI_STATUS Status;
if ((Instance == NULL) || (Image == NULL) ||
(Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
@@ -69,6 +72,29 @@ GetImage (
return EFI_NOT_FOUND;
}
+ if (PcdGetBool (PcdFollowMicrosoftRecommended)) {
+ //
+ // Get current video resolution and text mode
+ //
+ Status = gBS->HandleProtocol (
+ gST->ConsoleOutHandle,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **)&GraphicsOutput
+ );
+ if (!EFI_ERROR (Status)) {
+ //
+ // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
+ // Y = (VerticalResolution - LogoHeight) / 2
+ // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
+ // OffsetY + Y = Y'
+ // OffsetY = Y' - Y = -0.118 * VerticalResolution
+ //
+ *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
+ *OffsetX = 0;
+ *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
+ }
+ }
+
(*Instance)++;
*Attribute = mLogos[Current].Attribute;
*OffsetX = mLogos[Current].OffsetX;
diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
index 41215d25d8..ce29950089 100644
--- a/MdeModulePkg/Logo/LogoDxe.inf
+++ b/MdeModulePkg/Logo/LogoDxe.inf
@@ -41,6 +41,7 @@
UefiBootServicesTableLib
UefiDriverEntryPoint
DebugLib
+ PcdLib
[Protocols]
gEfiHiiDatabaseProtocolGuid ## CONSUMES
@@ -48,6 +49,9 @@
gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
gEdkiiPlatformLogoProtocolGuid ## PRODUCES
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
+
[Depex]
gEfiHiiDatabaseProtocolGuid AND
gEfiHiiImageExProtocolGuid
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index be5e829ca9..c8bb51df3b 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -2102,6 +2102,12 @@
# @Prompt The shared bit mask when Intel Tdx is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
+ ## This PCD sets the position of the Boot Logo.
+ # TRUE - The Logo is positioned following the recommendations from Microsoft.
+ # FALSE - The logo is positioned in the center of the screen.
+ # @ Prompt This position of the boot logo
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
index 33ce9f6198..09c1ac1cc1 100644
--- a/MdeModulePkg/MdeModulePkg.uni
+++ b/MdeModulePkg/MdeModulePkg.uni
@@ -1338,3 +1338,9 @@
#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe Resizable BAR Capability Supported.<BR><BR>\n"
"TRUE - PCIe Resizable BAR Capability is supported.<BR>\n"
"FALSE - PCIe Resizable BAR Capability is not supported.<BR>"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot Logo"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the Logo. When set to true, the Logo is positioned following the recommendations"
+ " from Microsoft, 38.2% from the top of the screen."
+
--
2.37.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo
@ 2022-12-21 8:19 Sean Rhodes
0 siblings, 0 replies; 8+ messages in thread
From: Sean Rhodes @ 2022-12-21 8:19 UTC (permalink / raw)
To: devel; +Cc: Sean Rhodes, Zhichao Gao, Ray Ni, Jian J Wang, Liming Gao
When set to true, the Logo is positioned according to the BGRT
specification, 38.2% from the top of the screen. When set to false,
no behaviour is changed and the logo is positioned centrally.
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
---
MdeModulePkg/MdeModulePkg.dec | 6 ++++++
MdeModulePkg/Logo/LogoDxe.inf | 4 ++++
MdeModulePkg/Logo/Logo.c | 28 +++++++++++++++++++++++++++-
MdeModulePkg/MdeModulePkg.uni | 6 ++++++
4 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index be5e829ca9..c8bb51df3b 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -2102,6 +2102,12 @@ [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
# @Prompt The shared bit mask when Intel Tdx is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
+ ## This PCD sets the position of the Boot Logo.
+ # TRUE - The Logo is positioned following the recommendations from Microsoft.
+ # FALSE - The logo is positioned in the center of the screen.
+ # @ Prompt This position of the boot logo
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended|FALSE|BOOLEAN|0x10000026
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
diff --git a/MdeModulePkg/Logo/LogoDxe.inf b/MdeModulePkg/Logo/LogoDxe.inf
index 41215d25d8..ce29950089 100644
--- a/MdeModulePkg/Logo/LogoDxe.inf
+++ b/MdeModulePkg/Logo/LogoDxe.inf
@@ -41,6 +41,7 @@ [LibraryClasses]
UefiBootServicesTableLib
UefiDriverEntryPoint
DebugLib
+ PcdLib
[Protocols]
gEfiHiiDatabaseProtocolGuid ## CONSUMES
@@ -48,6 +49,9 @@ [Protocols]
gEfiHiiPackageListProtocolGuid ## PRODUCES CONSUMES
gEdkiiPlatformLogoProtocolGuid ## PRODUCES
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFollowMicrosoftRecommended ## CONSUMES
+
[Depex]
gEfiHiiDatabaseProtocolGuid AND
gEfiHiiImageExProtocolGuid
diff --git a/MdeModulePkg/Logo/Logo.c b/MdeModulePkg/Logo/Logo.c
index 8ab874d2da..96e34b2011 100644
--- a/MdeModulePkg/Logo/Logo.c
+++ b/MdeModulePkg/Logo/Logo.c
@@ -13,6 +13,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/HiiPackageList.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
typedef struct {
EFI_IMAGE_ID ImageId;
@@ -51,12 +52,14 @@ GetImage (
IN EDKII_PLATFORM_LOGO_PROTOCOL *This,
IN OUT UINT32 *Instance,
OUT EFI_IMAGE_INPUT *Image,
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
OUT EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE *Attribute,
OUT INTN *OffsetX,
OUT INTN *OffsetY
)
{
- UINT32 Current;
+ UINT32 Current;
+ EFI_STATUS Status;
if ((Instance == NULL) || (Image == NULL) ||
(Attribute == NULL) || (OffsetX == NULL) || (OffsetY == NULL))
@@ -69,6 +72,29 @@ GetImage (
return EFI_NOT_FOUND;
}
+ if (PcdGetBool (PcdFollowMicrosoftRecommended)) {
+ //
+ // Get current video resolution and text mode
+ //
+ Status = gBS->HandleProtocol (
+ gST->ConsoleOutHandle,
+ &gEfiGraphicsOutputProtocolGuid,
+ (VOID **)&GraphicsOutput
+ );
+ if (!EFI_ERROR (Status)) {
+ //
+ // Center of LOGO is in the vertical position 38.2% when PcdBootLogoOnlyEnable is TRUE
+ // Y = (VerticalResolution - LogoHeight) / 2
+ // Y' = VerticalResolution * 0.382 - LogoHeight * 0.5
+ // OffsetY + Y = Y'
+ // OffsetY = Y' - Y = -0.118 * VerticalResolution
+ //
+ *Attribute = EdkiiPlatformLogoDisplayAttributeCenter;
+ *OffsetX = 0;
+ *OffsetY = -118 * (INTN)GraphicsOutput->Mode->Info->VerticalResolution / 1000;
+ }
+ }
+
(*Instance)++;
*Attribute = mLogos[Current].Attribute;
*OffsetX = mLogos[Current].OffsetX;
diff --git a/MdeModulePkg/MdeModulePkg.uni b/MdeModulePkg/MdeModulePkg.uni
index 33ce9f6198..09c1ac1cc1 100644
--- a/MdeModulePkg/MdeModulePkg.uni
+++ b/MdeModulePkg/MdeModulePkg.uni
@@ -1338,3 +1338,9 @@
#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdPcieResizableBarSupport_HELP #language en-US "Indicates if the PCIe Resizable BAR Capability Supported.<BR><BR>\n"
"TRUE - PCIe Resizable BAR Capability is supported.<BR>\n"
"FALSE - PCIe Resizable BAR Capability is not supported.<BR>"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommended_PROMPT #language en-US "The position of the Boot Logo"
+
+#string STR_gEfiMdeModulePkgTokenSpaceGuid_PcdFollowMicrosoftRecommend_HELP #language en-US "Sets the position of the Logo. When set to true, the Logo is positioned following the recommendations"
+ " from Microsoft, 38.2% from the top of the screen."
+
--
2.37.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-12-21 8:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-15 21:11 [PATCH] MdeModulePkg/Logo: Add a PCD to control the position of the Logo Sean Rhodes
2022-12-15 22:08 ` [edk2-devel] " Michael D Kinney
2022-12-15 22:17 ` Sean Rhodes
2022-12-15 22:54 ` Michael D Kinney
2022-12-16 8:57 ` Sean Rhodes
2022-12-16 15:59 ` Jeshua Smith
-- strict thread matches above, loose matches on Subject: below --
2022-12-16 8:56 Sean Rhodes
2022-12-21 8:19 Sean Rhodes
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox