From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Mudusuru, Giri P" <giri.p.mudusuru@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [PATCH] IntelSiliconPkg: Add Firmware Interface Table (FIT) definitions
Date: Fri, 26 Aug 2016 22:47:31 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C500280A1B5@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <a3cfe8f3ce077566db6c8e7301a509a274526897.1472249091.git.giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen.Yao@intel.com
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Giri P Mudusuru
> Sent: Saturday, August 27, 2016 6:07 AM
> To: edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> <jiewen.yao@intel.com>
> Subject: [edk2] [PATCH] IntelSiliconPkg: Add Firmware Interface Table (FIT)
> definitions
>
> Adding Processor Firmware Interface Table (FIT) related defines & structures
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Michael Kinney <michael.d.kinney@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> ---
> .../IndustryStandard/FirmwareInterfaceTable.h | 75
> ++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
> create mode 100644
> IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h
>
> diff --git
> a/IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> b/IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> new file mode 100644
> index 0000000..ea54578
> --- /dev/null
> +++ b/IntelSiliconPkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> @@ -0,0 +1,75 @@
> +/** @file
> + FirmwareInterfaceTable (FIT) related definitions.
> +
> + @todo: update document/spec reference
> +
> + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the
> BSD License
> + which accompanies this distribution. The full text of the license may be
> found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> +**/
> +
> +#ifndef __FIRMWARE_INTERFACE_TABLE_H__
> +#define __FIRMWARE_INTERFACE_TABLE_H__
> +
> +//
> +// FIT Entry type definitions
> +//
> +#define FIT_TYPE_00_HEADER 0x00
> +#define FIT_TYPE_01_MICROCODE 0x01
> +#define FIT_TYPE_02_STARTUP_ACM 0x02
> +#define FIT_TYPE_07_BIOS_STARTUP_MODULE 0x07
> +#define FIT_TYPE_08_TPM_POLICY 0x08
> +#define FIT_TYPE_09_BIOS_POLICY 0x09
> +#define FIT_TYPE_0A_TXT_POLICY 0x0A
> +#define FIT_TYPE_0B_KEY_MANIFEST 0x0B
> +#define FIT_TYPE_0C_BOOT_POLICY_MANIFEST 0x0C
> +#define FIT_TYPE_10_CSE_SECURE_BOOT 0x10
> +#define FIT_TYPE_2D_TXTSX_POLICY 0x2D
> +#define FIT_TYPE_2F_JMP_DEBUG_POLICY 0x2F
> +#define FIT_TYPE_7F_SKIP 0x7F
> +
> +#define FIT_POINTER_ADDRESS 0xFFFFFFC0 ///< Fixed
> address at 4G - 40h
> +
> +#define FIT_TYPE_VERSION 0x0100
> +
> +#define FIT_TYPE_00_SIGNATURE SIGNATURE_64 ('_', 'F', 'I', 'T', '_', ' ', ' ',
> ' ')
> +
> +#pragma pack(push, 1)
> +
> +typedef struct {
> + /**
> + Address is the base address of the firmware component
> + must be aligned on 16 byte boundary
> + **/
> + UINT64 Address;
> + UINT8 Size[3]; ///< Size is the span of the component in multiple of
> 16 bytes
> + UINT8 Reserved; ///< Reserved must be set to 0
> + /**
> + Component's version number in binary coded decimal (BCD) format.
> + For the FIT header entry, the value in this field will indicate the revision
> + number of the FIT data structure. The upper byte of the revision field
> + indicates the major revision and the lower byte indicates the minor
> revision.
> + **/
> + UINT16 Version;
> + UINT8 Type : 7; ///< FIT types 0x00 to 0x7F
> + ///
> + /// Checksum Valid indicates whether component has valid checksum.
> + ///
> + UINT8 C_V : 1;
> + /**
> + Component's checksum. The modulo sum of all the bytes in the
> component and
> + the value in this field (Chksum) must add up to zero. This field is only
> + valid if the C_V flag is non-zero.
> + **/
> + UINT8 Chksum;
> +} FIRMWARE_INTERFACE_TABLE_ENTRY;
> +
> +#pragma pack(pop)
> +
> +#endif
> --
> 2.9.0.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-08-26 22:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 22:07 [PATCH] IntelSiliconPkg: Add Firmware Interface Table (FIT) definitions Giri P Mudusuru
2016-08-26 22:47 ` Yao, Jiewen [this message]
2016-08-29 20:37 ` Kinney, Michael D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C500280A1B5@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox