From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Mudusuru, Giri P" <giri.p.mudusuru@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>
Subject: Re: [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions
Date: Tue, 18 Oct 2016 13:30:17 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C50386B3161@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <4be670ac09a39bcdcb50989e88fe0924382bd6b4.1476789783.git.giri.p.mudusuru@intel.com>
HI
I recommend we just use #include <IndustryStandard/Acpi.h>.
Acpi.h includes all ACPI version. There is no need to include Acpi61.h.
With this change, reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Giri P Mudusuru
> Sent: Tuesday, October 18, 2016 7:25 PM
> To: edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Yao, Jiewen
> <jiewen.yao@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT)
> definitions
>
> ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> able.pdf
>
> Cc: Michael Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
> ---
> .../Include/IndustryStandard/LowPowerIdleTable.h | 82
> ++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644
> MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
>
> diff --git a/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> new file mode 100644
> index 0000000..b29db04
> --- /dev/null
> +++ b/MdePkg/Include/IndustryStandard/LowPowerIdleTable.h
> @@ -0,0 +1,82 @@
> +/** @file
> + ACPI Low Power Idle Table (LPIT) definitions
> +
> + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the
> BSD License
> + which accompanies this distribution. The full text of the license may be
> found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +
> + @par Revision Reference:
> + - ACPI Low Power Idle Table (LPIT) Revision 001, dated July 2014
> +
> http://www.uefi.org/sites/default/files/resources/ACPI_Low_Power_Idle_T
> able.pdf
> +
> + @par Glossary:
> + - GAS - Generic Address Structure
> + - LPI - Low Power Idle
> +**/
> +#ifndef _LOW_POWER_IDLE_TABLE_H_
> +#define _LOW_POWER_IDLE_TABLE_H_
> +
> +#include <IndustryStandard/Acpi61.h>
> +
> +#pragma pack(1)
> +
> +///
> +/// LPI Structure Types
> +///
> +#define ACPI_LPI_STRUCTURE_TYPE_NATIVE_CSTATE 0x00
> +
> +///
> +/// Low Power Idle (LPI) State Flags
> +///
> +typedef union {
> + struct {
> + UINT32 Disabled : 1; ///< If set, LPI state is not used
> + /**
> + If set, Residency counter is not available for this LPI state and
> + Residency Counter Frequency is invalid
> + **/
> + UINT32 CounterUnavailable : 1;
> + UINT32 Reserved : 30; ///< Reserved for future use. Must
> be zero
> + } Bits;
> + UINT32 Data32;
> +} ACPI_LPI_STATE_FLAGS;
> +
> +///
> +/// Low Power Idle (LPI) structure with Native C-state instruction entry
> trigger descriptor
> +///
> +typedef struct {
> + UINT32 Type; ///< LPI State
> descriptor Type 0
> + UINT32 Length; ///< Length of
> LPI state Descriptor Structure
> + ///
> + /// Unique LPI state identifier: zero based, monotonically increasing
> identifier
> + ///
> + UINT16 UniqueId;
> + UINT8 Reserved[2]; ///<
> Must be Zero
> + ACPI_LPI_STATE_FLAGS Flags; ///< LPI
> state flags
> + /**
> + The LPI entry trigger, matching an existing _CST.Register object,
> represented as a
> + Generic Address Structure. All processors must request this state or
> deeper to trigger.
> + **/
> + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE EntryTrigger;
> + UINT32 Residency; ///<
> Minimum residency or break-even in uSec
> + UINT32 Latency; ///<
> Worst case exit latency in uSec
> + /**
> + [optional] Residency counter, represented as a Generic Address
> Structure.
> + If not present, Flags[1] bit should be set.
> + **/
> + EFI_ACPI_6_1_GENERIC_ADDRESS_STRUCTURE ResidencyCounter;
> + /**
> + [optional] Residency counter frequency in cycles per second. Value 0
> indicates that
> + counter runs at TSC frequency. Valid only if Residency Counter is
> present.
> + **/
> + UINT64
> ResidencyCounterFrequency;
> +} ACPI_LPI_NATIVE_CSTATE_DESCRIPTOR;
> +
> +#pragma pack()
> +
> +#endif
> --
> 2.9.0.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-10-18 13:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-18 11:24 [PATCH] MdePkg: Add ACPI Low Power Idle Table (LPIT) definitions Giri P Mudusuru
2016-10-18 13:30 ` Yao, Jiewen [this message]
2016-10-18 13:55 ` Mudusuru, Giri P
2016-10-20 5:10 ` Gao, Liming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C50386B3161@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox