public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Ni, Ruiyu" <ruiyu.ni@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: [PATCH 4/4] MdeModulePkg/SecurityStubDxe: Report failure if image is load earlier
Date: Thu, 10 Nov 2016 07:27:51 +0000	[thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C50386CE16D@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20161104005942.345832-5-ruiyu.ni@intel.com>

Reviewed-by: Jiewen.yao@intel.com

> -----Original Message-----
> From: Ni, Ruiyu
> Sent: Friday, November 4, 2016 9:00 AM
> To: edk2-devel@lists.01.org
> Cc: Yao, Jiewen <jiewen.yao@intel.com>
> Subject: [PATCH 4/4] MdeModulePkg/SecurityStubDxe: Report failure if
> image is load earlier
> 
> The 3rd party image should be loaded after EndOfDxe event signal and
> DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
> published DxeSmmReadyToLock protocol.
> So the SecurityStubDxe can only depend on EndOfDxe event.
> 
> This patch enhances the SecurityStubDxe to listen on
> DxeSmmReadyToLock protocol installation and if any 3rd party image
> is loaded before DxeSmmReadyToLock, it reports failure.
> 
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> ---
>  .../SecurityStubDxe/Defer3rdPartyImageLoad.c       | 57
> ++++++++++++++++++++++
>  .../SecurityStubDxe/Defer3rdPartyImageLoad.h       |  5 +-
>  .../Universal/SecurityStubDxe/SecurityStubDxe.inf  |  3 ++
>  3 files changed, 64 insertions(+), 1 deletion(-)
> 
> diff --git
> a/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c
> b/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c
> index ca45d56..84d573b 100644
> --- a/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c
> +++
> b/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c
> @@ -30,6 +30,7 @@ typedef struct {
>    DEFERRED_3RD_PARTY_IMAGE_INFO     *ImageInfo;    ///<
> deferred 3rd party image item
>  } DEFERRED_3RD_PARTY_IMAGE_TABLE;
> 
> +BOOLEAN                          mImageLoadedAfterEndOfDxe
> = FALSE;
>  BOOLEAN                          mEndOfDxe
> = FALSE;
>  DEFERRED_3RD_PARTY_IMAGE_TABLE   mDeferred3rdPartyImage = {
>    0,       // Deferred image count
> @@ -257,6 +258,52 @@ EndOfDxe (
>  }
> 
>  /**
> +  Event notification for gEfiDxeSmmReadyToLockProtocolGuid event.
> +
> +  This function reports failure if any deferred image is loaded before
> +  this callback.
> +  Platform should publish ReadyToLock protocol immediately after
> signaling
> +  of the End of DXE Event.
> +
> +  @param  Event                 The Event that is being processed,
> not used.
> +  @param  Context               Event Context, not used.
> +
> +**/
> +VOID
> +EFIAPI
> +DxdSmmReadyToLock (
> +  IN EFI_EVENT  Event,
> +  IN VOID       *Context
> +  )
> +{
> +  EFI_STATUS                Status;
> +  VOID                      *Interface;
> +
> +  Status = gBS->LocateProtocol (&gEfiDxeSmmReadyToLockProtocolGuid,
> NULL, &Interface);
> +  if (EFI_ERROR (Status)) {
> +    return;
> +  }
> +
> +  gBS->CloseEvent (Event);
> +
> +  if (mImageLoadedAfterEndOfDxe) {
> +    //
> +    // Platform should not dispatch the 3rd party images after signaling
> EndOfDxe event
> +    // but before publishing DxeSmmReadyToLock protocol.
> +    //
> +    DEBUG ((
> +      DEBUG_ERROR,
> +      "[Security] 3rd party images must be dispatched after
> DxeSmmReadyToLock Protocol installation!\n"
> +      ));
> +    REPORT_STATUS_CODE (
> +      EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED,
> +      (EFI_SOFTWARE_DXE_BS_DRIVER |
> EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)
> +      );
> +    ASSERT (FALSE);
> +  }
> +}
> +
> +/**
>    Defer the 3rd party image load and installs Deferred Image Load
> Protocol.
> 
>    @param[in]  File                  This is a pointer to the device
> path of the file that
> @@ -303,6 +350,7 @@ Defer3rdPartyImageLoad (
>      );
> 
>    if (mEndOfDxe) {
> +    mImageLoadedAfterEndOfDxe = TRUE;
>      //
>      // The image might be first time loaded after EndOfDxe,
>      // So ImageInfo can be NULL.
> @@ -334,6 +382,7 @@ Defer3rdPartyImageLoadInitialize (
>    EFI_STATUS                           Status;
>    EFI_HANDLE                           Handle;
>    EFI_EVENT                            Event;
> +  VOID                                 *Registration;
> 
>    Handle = NULL;
>    Status = gBS->InstallMultipleProtocolInterfaces (
> @@ -353,4 +402,12 @@ Defer3rdPartyImageLoadInitialize (
>                    &Event
>                    );
>    ASSERT_EFI_ERROR (Status);
> +
> +  EfiCreateProtocolNotifyEvent (
> +    &gEfiDxeSmmReadyToLockProtocolGuid,
> +    TPL_CALLBACK,
> +    DxdSmmReadyToLock,
> +    NULL,
> +    &Registration
> +    );
>  }
> diff --git
> a/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.h
> b/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.h
> index 3fab258..75553ba 100644
> --- a/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.h
> +++
> b/MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.h
> @@ -15,16 +15,19 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF
> ANY KIND, EITHER EXPRESS OR IMPLIED.
>  #ifndef _DEFER_3RD_PARTY_IMAGE_LOAD_H_
>  #define _DEFER_3RD_PARTY_IMAGE_LOAD_H_
> 
> -#include <Uefi.h>
> +#include <PiDxe.h>
>  #include <Guid/EventGroup.h>
>  #include <Protocol/DeferredImageLoad.h>
>  #include <Protocol/FirmwareVolume2.h>
> +#include <Protocol/DxeSmmReadyToLock.h>
> 
>  #include <Library/UefiBootServicesTableLib.h>
>  #include <Library/BaseMemoryLib.h>
>  #include <Library/MemoryAllocationLib.h>
>  #include <Library/DevicePathLib.h>
>  #include <Library/DebugLib.h>
> +#include <Library/UefiLib.h>
> +#include <Library/ReportStatusCodeLib.h>
> 
>  /**
>    Returns information about a deferred image.
> diff --git a/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> b/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> index be6ce6c..7f8f6cb 100644
> --- a/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> +++ b/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
> @@ -41,6 +41,8 @@ [LibraryClasses]
>    UefiBootServicesTableLib
>    DebugLib
>    SecurityManagementLib
> +  ReportStatusCodeLib
> +  UefiLib
> 
>  [Guids]
>    gEfiEndOfDxeEventGroupGuid                    ## CONSUMES ##
> Event
> @@ -49,6 +51,7 @@ [Protocols]
>    gEfiSecurityArchProtocolGuid                  ## PRODUCES
>    gEfiSecurity2ArchProtocolGuid                 ## PRODUCES
>    gEfiDeferredImageLoadProtocolGuid             ## PRODUCES
> +  gEfiDxeSmmReadyToLockProtocolGuid             ## CONSUMES
> 
>  [Depex]
>    TRUE
> --
> 2.9.0.windows.1



  parent reply	other threads:[~2016-11-10  7:27 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-04  0:59 [PATCH 0/4] Defer 3rd party images loading to after EndOfDxe Ruiyu Ni
2016-11-04  0:59 ` [PATCH 1/4] MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe Ruiyu Ni
2016-11-10  7:42   ` Zhang, Chao B
2016-11-04  0:59 ` [PATCH 2/4] MdeModulePkg/UefiBootManager: Add EfiBootManagerDispatchDeferredImages Ruiyu Ni
2016-11-04  0:59 ` [PATCH 3/4] MdeModulePkg/BdsDxe: Check deferred images before booting to OS Ruiyu Ni
2016-11-04  0:59 ` [PATCH 4/4] MdeModulePkg/SecurityStubDxe: Report failure if image is load earlier Ruiyu Ni
2016-11-07 14:07   ` Laszlo Ersek
2016-11-10  7:27   ` Yao, Jiewen [this message]
2016-11-04  5:14 ` [PATCH 0/4] Defer 3rd party images loading to after EndOfDxe Gao, Liming
2016-11-04  6:09   ` Ni, Ruiyu
2016-11-04 16:48     ` Laszlo Ersek
2016-11-07  2:32       ` Ni, Ruiyu
2016-11-07 14:03         ` Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=74D8A39837DF1E4DA445A8C0B3885C50386CE16D@shsmsx102.ccr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox