* [PATCH V2] MdeModulePkg EhciPei: Support IoMmu
@ 2017-11-16 10:03 Star Zeng
2017-11-17 2:32 ` Yao, Jiewen
0 siblings, 1 reply; 2+ messages in thread
From: Star Zeng @ 2017-11-16 10:03 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c | 250 +++++++++++++++++++++++++++++++
MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c | 40 ++++-
MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 119 ++++++++++++++-
MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf | 6 +-
MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c | 38 +++--
MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 42 ++++--
MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c | 84 +++++++++--
MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h | 18 ++-
8 files changed, 551 insertions(+), 46 deletions(-)
create mode 100644 MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
new file mode 100644
index 000000000000..1330f53f411a
--- /dev/null
+++ b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
@@ -0,0 +1,250 @@
+/** @file
+The DMA memory help functions.
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Attribute;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->Map (
+ IoMmu,
+ Operation,
+ HostAddress,
+ NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ switch (Operation) {
+ case EdkiiIoMmuOperationBusMasterRead:
+ case EdkiiIoMmuOperationBusMasterRead64:
+ Attribute = EDKII_IOMMU_ACCESS_READ;
+ break;
+ case EdkiiIoMmuOperationBusMasterWrite:
+ case EdkiiIoMmuOperationBusMasterWrite64:
+ Attribute = EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ case EdkiiIoMmuOperationBusMasterCommonBuffer:
+ case EdkiiIoMmuOperationBusMasterCommonBuffer64:
+ Attribute = EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ default:
+ ASSERT(FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ Attribute
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, Mapping);
+ *Mapping = NULL;
+ return Status;
+ }
+ } else {
+ *DeviceAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
+ *Mapping = NULL;
+ Status = EFI_SUCCESS;
+ }
+ return Status;
+}
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ }
+}
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfBytes;
+ EFI_PHYSICAL_ADDRESS HostPhyAddress;
+
+ *HostAddress = NULL;
+ *DeviceAddress = 0;
+ *Mapping = NULL;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->AllocateBuffer (
+ IoMmu,
+ EfiBootServicesData,
+ Pages,
+ HostAddress,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
+ Status = IoMmu->Map (
+ IoMmu,
+ EdkiiIoMmuOperationBusMasterCommonBuffer,
+ *HostAddress,
+ &NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *HostAddress = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, *Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *Mapping = NULL;
+ *HostAddress = NULL;
+ return Status;
+ }
+ } else {
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ Pages,
+ &HostPhyAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ *HostAddress = (VOID *) (UINTN) HostPhyAddress;
+ *DeviceAddress = HostPhyAddress;
+ *Mapping = NULL;
+ }
+ return Status;
+}
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
+ }
+}
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ )
+{
+ PeiServicesLocatePpi (
+ &gEdkiiIoMmuPpiGuid,
+ 0,
+ NULL,
+ (VOID **) IoMmu
+ );
+}
+
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
index 31647ff0525c..5cad25e926c5 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -1141,6 +1141,36 @@ ON_EXIT:
}
/**
+ One notified function to stop the Host Controller at the end of PEI
+
+ @param[in] PeiServices Pointer to PEI Services Table.
+ @param[in] NotifyDescriptor Pointer to the descriptor for the Notification event that
+ caused this function to execute.
+ @param[in] Ppi Pointer to the PPI data associated with this function.
+
+ @retval EFI_SUCCESS The function completes successfully
+ @retval others
+**/
+EFI_STATUS
+EFIAPI
+EhcEndOfPei (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
+ IN VOID *Ppi
+ )
+{
+ PEI_USB2_HC_DEV *Ehc;
+
+ Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_THIS_NOTIFY (NotifyDescriptor);
+
+ EhcHaltHC (Ehc, EHC_GENERIC_TIMEOUT);
+
+ EhcFreeSched (Ehc);
+
+ return EFI_SUCCESS;
+}
+
+/**
@param FileHandle Handle of the file being invoked.
@param PeiServices Describes the list of possible PEI Services.
@@ -1219,6 +1249,8 @@ EhcPeimEntry (
EhcDev->Signature = USB2_HC_DEV_SIGNATURE;
+ IoMmuInit (&EhcDev->IoMmu);
+
EhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
@@ -1250,6 +1282,12 @@ EhcPeimEntry (
continue;
}
+ EhcDev->EndOfPeiNotifyList.Flags = (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
+ EhcDev->EndOfPeiNotifyList.Guid = &gEfiEndOfPeiSignalPpiGuid;
+ EhcDev->EndOfPeiNotifyList.Notify = EhcEndOfPei;
+
+ PeiServicesNotifyPpi (&EhcDev->EndOfPeiNotifyList);
+
Index++;
}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
index d7a68d909547..279407475b66 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
@@ -1,7 +1,7 @@
/** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -21,6 +21,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include <Ppi/UsbController.h>
#include <Ppi/Usb2HostController.h>
+#include <Ppi/IoMmu.h>
+#include <Ppi/EndOfPeiPhase.h>
#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
@@ -94,7 +96,13 @@ typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;
struct _PEI_USB2_HC_DEV {
UINTN Signature;
PEI_USB2_HOST_CONTROLLER_PPI Usb2HostControllerPpi;
- EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+ EDKII_IOMMU_PPI *IoMmu;
+ EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
+ //
+ // EndOfPei callback is used to stop the XHC DMA operation
+ // after exit PEI phase.
+ //
+ EFI_PEI_NOTIFY_DESCRIPTOR EndOfPeiNotifyList;
UINT32 UsbHostControllerBaseAddress;
PEI_URB *Urb;
USBHC_MEM_POOL *MemPool;
@@ -122,7 +130,6 @@ struct _PEI_USB2_HC_DEV {
// Periodic (interrupt) transfer schedule data:
//
VOID *PeriodFrame; // Mapped as common buffer
- VOID *PeriodFrameHost;
VOID *PeriodFrameMap;
PEI_EHC_QH *PeriodOne;
@@ -138,6 +145,7 @@ struct _PEI_USB2_HC_DEV {
};
#define PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(a) CR (a, PEI_USB2_HC_DEV, Usb2HostControllerPpi, USB2_HC_DEV_SIGNATURE)
+#define PEI_RECOVERY_USB_EHC_DEV_FROM_THIS_NOTIFY(a) CR (a, PEI_USB2_HC_DEV, EndOfPeiNotifyList, USB2_HC_DEV_SIGNATURE)
/**
@param EhcDev EHCI Device.
@@ -173,7 +181,8 @@ UsbHcInitMemPool (
/**
Release the memory management pool.
-
+
+ @param Ehc The EHCI device.
@param Pool The USB memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@@ -182,6 +191,7 @@ UsbHcInitMemPool (
**/
EFI_STATUS
UsbHcFreeMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool
)
;
@@ -208,6 +218,7 @@ UsbHcAllocateMem (
/**
Free the allocated memory back to the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool of the host controller.
@param Mem The memory to free.
@param Size The size of the memory to free.
@@ -215,10 +226,110 @@ UsbHcAllocateMem (
**/
VOID
UsbHcFreeMem (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN VOID *Mem,
IN UINTN Size
)
;
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ );
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
index 7083f8668150..813ccc94507d 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
@@ -4,7 +4,7 @@
# It produces gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
# which is used to enable recovery function from USB Drivers.
#
-# Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
@@ -43,6 +43,7 @@ [Sources]
EhciSched.h
EhciUrb.h
UsbHcMem.h
+ DmaMem.c
[Packages]
@@ -61,7 +62,8 @@ [LibraryClasses]
[Ppis]
gPeiUsb2HostControllerPpiGuid ## PRODUCES
gPeiUsbControllerPpiGuid ## CONSUMES
-
+ gEdkiiIoMmuPpiGuid ## CONSUMES
+ gEfiEndOfPeiSignalPpiGuid ## CONSUMES
[Depex]
gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
index e992d4f28797..606a53db1da1 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -107,11 +107,13 @@ EhcInitSched (
IN PEI_USB2_HC_DEV *Ehc
)
{
+ VOID *Buf;
EFI_PHYSICAL_ADDRESS PhyAddr;
VOID *Map;
UINTN Index;
UINT32 *Desc;
EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS PciAddr;
//
// First initialize the periodical schedule data:
@@ -124,15 +126,19 @@ EhcInitSched (
// The Frame List ocupies 4K bytes,
// and must be aligned on 4-Kbyte boundaries.
//
- Status = PeiServicesAllocatePages (
- EfiBootServicesCode,
+ Status = IoMmuAllocateBuffer (
+ Ehc->IoMmu,
1,
- &PhyAddr
+ &Buf,
+ &PhyAddr,
+ &Map
);
- Map = NULL;
- Ehc->PeriodFrameHost = (VOID *)(UINTN)PhyAddr;
- Ehc->PeriodFrame = (VOID *)(UINTN)PhyAddr;
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Ehc->PeriodFrame = Buf;
Ehc->PeriodFrameMap = Map;
Ehc->High32bitAddr = EHC_HIGH_32BIT (PhyAddr);
@@ -161,19 +167,20 @@ EhcInitSched (
// Initialize the frame list entries then set the registers
//
Desc = (UINT32 *) Ehc->PeriodFrame;
-
+ PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
for (Index = 0; Index < EHC_FRAME_LEN; Index++) {
- Desc[Index] = QH_LINK (Ehc->PeriodOne, EHC_TYPE_QH, FALSE);
+ Desc[Index] = QH_LINK (PciAddr, EHC_TYPE_QH, FALSE);
}
- EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT (Ehc->PeriodFrame));
+ EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT (PhyAddr));
//
// Second initialize the asynchronous schedule:
// Only need to set the AsynListAddr register to
// the reclamation header
//
- EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT (Ehc->ReclaimHead));
+ PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
+ EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT (PciAddr));
return EFI_SUCCESS;
}
@@ -192,26 +199,27 @@ EhcFreeSched (
EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, 0);
if (Ehc->PeriodOne != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
Ehc->PeriodOne = NULL;
}
if (Ehc->ReclaimHead != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
Ehc->ReclaimHead = NULL;
}
if (Ehc->ShortReadStop != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->ShortReadStop, sizeof (PEI_EHC_QTD));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ShortReadStop, sizeof (PEI_EHC_QTD));
Ehc->ShortReadStop = NULL;
}
if (Ehc->MemPool != NULL) {
- UsbHcFreeMemPool (Ehc->MemPool);
+ UsbHcFreeMemPool (Ehc, Ehc->MemPool);
Ehc->MemPool = NULL;
}
if (Ehc->PeriodFrame != NULL) {
+ IoMmuFreeBuffer (Ehc->IoMmu, 1, Ehc->PeriodFrame, Ehc->PeriodFrameMap);
Ehc->PeriodFrame = NULL;
}
}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
index 597a4947f5bc..3dadcd60b6fe 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -301,7 +301,7 @@ EhcFreeQtds (
Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
RemoveEntryList (&Qtd->QtdList);
- UsbHcFreeMem (Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
}
}
@@ -318,13 +318,21 @@ EhcFreeUrb (
IN PEI_URB *Urb
)
{
+ if (Urb->RequestPhy != NULL) {
+ IoMmuUnmap (Ehc->IoMmu, Urb->RequestMap);
+ }
+
+ if (Urb->DataMap != NULL) {
+ IoMmuUnmap (Ehc->IoMmu, Urb->DataMap);
+ }
+
if (Urb->Qh != NULL) {
//
// Ensure that this queue head has been unlinked from the
// schedule data structures. Free all the associated QTDs
//
EhcFreeQtds (Ehc, &Urb->Qh->Qtds);
- UsbHcFreeMem (Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
}
}
@@ -527,13 +535,11 @@ EhcCreateUrb (
{
USB_ENDPOINT *Ep;
EFI_PHYSICAL_ADDRESS PhyAddr;
+ EDKII_IOMMU_OPERATION MapOp;
EFI_STATUS Status;
UINTN Len;
PEI_URB *Urb;
VOID *Map;
-
-
- Map = NULL;
Urb = Ehc->Urb;
Urb->Signature = EHC_URB_SIG;
@@ -576,24 +582,40 @@ EhcCreateUrb (
//
if (Request != NULL) {
Len = sizeof (EFI_USB_DEVICE_REQUEST);
- PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Request ;
- if ( (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
+ MapOp = EdkiiIoMmuOperationBusMasterRead;
+ Status = IoMmuMap (Ehc->IoMmu, MapOp, Request, &Len, &PhyAddr, &Map);
+
+ if (EFI_ERROR (Status) || (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
goto ON_ERROR;
}
Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
Urb->RequestMap = Map;
+ } else {
+ Urb->RequestPhy = NULL;
+ Urb->RequestMap = NULL;
}
if (Data != NULL) {
Len = DataLen;
- PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Data ;
- if ( (Len != DataLen)) {
+
+ if (Ep->Direction == EfiUsbDataIn) {
+ MapOp = EdkiiIoMmuOperationBusMasterWrite;
+ } else {
+ MapOp = EdkiiIoMmuOperationBusMasterRead;
+ }
+
+ Status = IoMmuMap (Ehc->IoMmu, MapOp, Data, &Len, &PhyAddr, &Map);
+
+ if (EFI_ERROR (Status) || (Len != DataLen)) {
goto ON_ERROR;
}
Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
Urb->DataMap = Map;
+ } else {
+ Urb->DataPhy = NULL;
+ Urb->DataMap = NULL;
}
Status = EhcCreateQtds (Ehc, Urb);
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
index 5f9f5f0718f3..a0419bd85722 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -79,16 +79,18 @@ UsbHcAllocMemBlock (
Block->Bits = (UINT8 *)(UINTN)TempPtr;
-
- Status = PeiServicesAllocatePages (
- EfiBootServicesCode,
+ Status = IoMmuAllocateBuffer (
+ Ehc->IoMmu,
Pages,
- &TempPtr
+ (VOID **) &BufHost,
+ &MappedAddr,
+ &Mapping
);
- ZeroMem ((VOID *)(UINTN)TempPtr, Pages*EFI_PAGE_SIZE);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ ZeroMem (BufHost, Pages*EFI_PAGE_SIZE);
- BufHost = (VOID *)(UINTN)TempPtr;
- MappedAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) BufHost;
//
// Check whether the data structure used by the host controller
// should be restricted into the same 4G
@@ -109,17 +111,21 @@ UsbHcAllocMemBlock (
/**
Free the memory block from the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool to free the block from.
@param Block The memory block to free.
**/
VOID
UsbHcFreeMemBlock (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN USBHC_MEM_BLOCK *Block
)
{
ASSERT ((Pool != NULL) && (Block != NULL));
+
+ IoMmuFreeBuffer (Ehc->IoMmu, EFI_SIZE_TO_PAGES (Block->BufLen), Block->BufHost, Block->Mapping);
}
/**
@@ -196,6 +202,54 @@ UsbHcAllocMemFromBlock (
}
/**
+ Calculate the corresponding pci bus address according to the Mem parameter.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The pointer to host memory.
+ @param Size The size of the memory region.
+
+ @return the pci memory address
+**/
+EFI_PHYSICAL_ADDRESS
+UsbHcGetPciAddressForHostMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ UINTN AllocSize;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ UINTN Offset;
+
+ Head = Pool->Head;
+ AllocSize = USBHC_MEM_ROUND (Size);
+
+ if (Mem == NULL) {
+ return 0;
+ }
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ //
+ // scan the memory block list for the memory block that
+ // completely contains the allocated memory.
+ //
+ if ((Block->BufHost <= (UINT8 *) Mem) && (((UINT8 *) Mem + AllocSize) <= (Block->BufHost + Block->BufLen))) {
+ break;
+ }
+ }
+
+ ASSERT ((Block != NULL));
+ //
+ // calculate the pci memory address for host memory address.
+ //
+ Offset = (UINT8 *)Mem - Block->BufHost;
+ PhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN) (Block->Buf + Offset);
+ return PhyAddr;
+}
+
+/**
Insert the memory block to the pool's list of the blocks.
@param Head The head of the memory pool's block list.
@@ -316,7 +370,8 @@ UsbHcInitMemPool (
/**
Release the memory management pool.
-
+
+ @param Ehc The EHCI device.
@param Pool The USB memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@@ -325,6 +380,7 @@ UsbHcInitMemPool (
**/
EFI_STATUS
UsbHcFreeMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool
)
{
@@ -337,11 +393,11 @@ UsbHcFreeMemPool (
// UsbHcUnlinkMemBlock can't be used to unlink and free the
// first block.
//
- for (Block = Pool->Head->Next; Block != NULL; Block = Pool->Head->Next) {
- UsbHcFreeMemBlock (Pool, Block);
+ for (Block = Pool->Head->Next; Block != NULL; Block = Block->Next) {
+ UsbHcFreeMemBlock (Ehc, Pool, Block);
}
- UsbHcFreeMemBlock (Pool, Pool->Head);
+ UsbHcFreeMemBlock (Ehc, Pool, Pool->Head);
return EFI_SUCCESS;
}
@@ -425,6 +481,7 @@ UsbHcAllocateMem (
/**
Free the allocated memory back to the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool of the host controller.
@param Mem The memory to free.
@param Size The size of the memory to free.
@@ -432,6 +489,7 @@ UsbHcAllocateMem (
**/
VOID
UsbHcFreeMem (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN VOID *Mem,
IN UINTN Size
@@ -486,7 +544,7 @@ UsbHcFreeMem (
// Release the current memory block if it is empty and not the head
//
if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
- UsbHcFreeMemBlock (Pool, Block);
+ UsbHcFreeMemBlock (Ehc, Pool, Block);
}
return ;
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
index 586d12af9658..717a8c822c90 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
+++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
@@ -1,7 +1,7 @@
/** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -74,4 +74,20 @@ typedef struct _USBHC_MEM_POOL {
} while (0)
+/**
+ Calculate the corresponding pci bus address according to the Mem parameter.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The pointer to host memory.
+ @param Size The size of the memory region.
+
+ @return the pci memory address
+**/
+EFI_PHYSICAL_ADDRESS
+UsbHcGetPciAddressForHostMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ );
+
#endif
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2] MdeModulePkg EhciPei: Support IoMmu
2017-11-16 10:03 [PATCH V2] MdeModulePkg EhciPei: Support IoMmu Star Zeng
@ 2017-11-17 2:32 ` Yao, Jiewen
0 siblings, 0 replies; 2+ messages in thread
From: Yao, Jiewen @ 2017-11-17 2:32 UTC (permalink / raw)
To: Zeng, Star, edk2-devel@lists.01.org
Reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: Zeng, Star
> Sent: Thursday, November 16, 2017 6:03 PM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>
> Subject: [PATCH V2] MdeModulePkg EhciPei: Support IoMmu
>
> V2: Halt HC at EndOfPei.
>
> Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
>
> If no IOMMU_PPI exists, this driver still calls PEI service to allocate
> DMA buffer, with assumption that DRAM==DMA.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Star Zeng <star.zeng@intel.com>
> ---
> MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c | 250
> +++++++++++++++++++++++++++++++
> MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c | 40 ++++-
> MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 119 ++++++++++++++-
> MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf | 6 +-
> MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c | 38 +++--
> MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 42 ++++--
> MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c | 84 +++++++++--
> MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h | 18 ++-
> 8 files changed, 551 insertions(+), 46 deletions(-)
> create mode 100644 MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
>
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
> b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
> new file mode 100644
> index 000000000000..1330f53f411a
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
> @@ -0,0 +1,250 @@
> +/** @file
> +The DMA memory help functions.
> +
> +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions
> +of the BSD License which accompanies this distribution. The
> +full text of the license may be found at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "EhcPeim.h"
> +
> +/**
> + Provides the controller-specific addresses required to access system memory
> from a
> + DMA bus master.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Operation Indicates if the bus master is going to read
> or write to system memory.
> + @param HostAddress The system memory address to map to
> the PCI controller.
> + @param NumberOfBytes On input the number of bytes to map.
> On output the number of bytes
> + that were mapped.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The range was mapped for the returned
> NumberOfBytes.
> + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
> common buffer.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The request could not be completed due
> to a lack of resources.
> + @retval EFI_DEVICE_ERROR The system hardware could not map the
> requested address.
> +
> +**/
> +EFI_STATUS
> +IoMmuMap (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN EDKII_IOMMU_OPERATION Operation,
> + IN VOID *HostAddress,
> + IN OUT UINTN *NumberOfBytes,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_STATUS Status;
> + UINT64 Attribute;
> +
> + if (IoMmu != NULL) {
> + Status = IoMmu->Map (
> + IoMmu,
> + Operation,
> + HostAddress,
> + NumberOfBytes,
> + DeviceAddress,
> + Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + switch (Operation) {
> + case EdkiiIoMmuOperationBusMasterRead:
> + case EdkiiIoMmuOperationBusMasterRead64:
> + Attribute = EDKII_IOMMU_ACCESS_READ;
> + break;
> + case EdkiiIoMmuOperationBusMasterWrite:
> + case EdkiiIoMmuOperationBusMasterWrite64:
> + Attribute = EDKII_IOMMU_ACCESS_WRITE;
> + break;
> + case EdkiiIoMmuOperationBusMasterCommonBuffer:
> + case EdkiiIoMmuOperationBusMasterCommonBuffer64:
> + Attribute = EDKII_IOMMU_ACCESS_READ |
> EDKII_IOMMU_ACCESS_WRITE;
> + break;
> + default:
> + ASSERT(FALSE);
> + return EFI_INVALID_PARAMETER;
> + }
> + Status = IoMmu->SetAttribute (
> + IoMmu,
> + *Mapping,
> + Attribute
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->Unmap (IoMmu, Mapping);
> + *Mapping = NULL;
> + return Status;
> + }
> + } else {
> + *DeviceAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
> + *Mapping = NULL;
> + Status = EFI_SUCCESS;
> + }
> + return Status;
> +}
> +
> +/**
> + Completes the Map() operation and releases any corresponding resources.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuUnmap (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN VOID *Mapping
> + )
> +{
> + if (IoMmu != NULL) {
> + IoMmu->SetAttribute (IoMmu, Mapping, 0);
> + IoMmu->Unmap (IoMmu, Mapping);
> + }
> +}
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_STATUS Status;
> + UINTN NumberOfBytes;
> + EFI_PHYSICAL_ADDRESS HostPhyAddress;
> +
> + *HostAddress = NULL;
> + *DeviceAddress = 0;
> + *Mapping = NULL;
> +
> + if (IoMmu != NULL) {
> + Status = IoMmu->AllocateBuffer (
> + IoMmu,
> + EfiBootServicesData,
> + Pages,
> + HostAddress,
> + 0
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
> + Status = IoMmu->Map (
> + IoMmu,
> + EdkiiIoMmuOperationBusMasterCommonBuffer,
> + *HostAddress,
> + &NumberOfBytes,
> + DeviceAddress,
> + Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *HostAddress = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + Status = IoMmu->SetAttribute (
> + IoMmu,
> + *Mapping,
> + EDKII_IOMMU_ACCESS_READ |
> EDKII_IOMMU_ACCESS_WRITE
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->Unmap (IoMmu, *Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *Mapping = NULL;
> + *HostAddress = NULL;
> + return Status;
> + }
> + } else {
> + Status = PeiServicesAllocatePages (
> + EfiBootServicesCode,
> + Pages,
> + &HostPhyAddress
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + *HostAddress = (VOID *) (UINTN) HostPhyAddress;
> + *DeviceAddress = HostPhyAddress;
> + *Mapping = NULL;
> + }
> + return Status;
> +}
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + )
> +{
> + if (IoMmu != NULL) {
> + IoMmu->SetAttribute (IoMmu, Mapping, 0);
> + IoMmu->Unmap (IoMmu, Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
> + }
> +}
> +
> +/**
> + Initialize IOMMU.
> +
> + @param IoMmu Pointer to pointer to IOMMU PPI.
> +
> +**/
> +VOID
> +IoMmuInit (
> + OUT EDKII_IOMMU_PPI **IoMmu
> + )
> +{
> + PeiServicesLocatePpi (
> + &gEdkiiIoMmuPpiGuid,
> + 0,
> + NULL,
> + (VOID **) IoMmu
> + );
> +}
> +
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
> b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
> index 31647ff0525c..5cad25e926c5 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
> @@ -2,7 +2,7 @@
> PEIM to produce gPeiUsb2HostControllerPpiGuid based on
> gPeiUsbControllerPpiGuid
> which is used to enable recovery function from USB Drivers.
>
> -Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -1141,6 +1141,36 @@ ON_EXIT:
> }
>
> /**
> + One notified function to stop the Host Controller at the end of PEI
> +
> + @param[in] PeiServices Pointer to PEI Services Table.
> + @param[in] NotifyDescriptor Pointer to the descriptor for the
> Notification event that
> + caused this function to execute.
> + @param[in] Ppi Pointer to the PPI data associated with
> this function.
> +
> + @retval EFI_SUCCESS The function completes successfully
> + @retval others
> +**/
> +EFI_STATUS
> +EFIAPI
> +EhcEndOfPei (
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
> + IN VOID *Ppi
> + )
> +{
> + PEI_USB2_HC_DEV *Ehc;
> +
> + Ehc = PEI_RECOVERY_USB_EHC_DEV_FROM_THIS_NOTIFY
> (NotifyDescriptor);
> +
> + EhcHaltHC (Ehc, EHC_GENERIC_TIMEOUT);
> +
> + EhcFreeSched (Ehc);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> @param FileHandle Handle of the file being invoked.
> @param PeiServices Describes the list of possible PEI Services.
>
> @@ -1219,6 +1249,8 @@ EhcPeimEntry (
>
> EhcDev->Signature = USB2_HC_DEV_SIGNATURE;
>
> + IoMmuInit (&EhcDev->IoMmu);
> +
> EhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
>
>
> @@ -1250,6 +1282,12 @@ EhcPeimEntry (
> continue;
> }
>
> + EhcDev->EndOfPeiNotifyList.Flags =
> (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST);
> + EhcDev->EndOfPeiNotifyList.Guid = &gEfiEndOfPeiSignalPpiGuid;
> + EhcDev->EndOfPeiNotifyList.Notify = EhcEndOfPei;
> +
> + PeiServicesNotifyPpi (&EhcDev->EndOfPeiNotifyList);
> +
> Index++;
> }
>
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> index d7a68d909547..279407475b66 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> @@ -1,7 +1,7 @@
> /** @file
> Private Header file for Usb Host Controller PEIM
>
> -Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -21,6 +21,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND,
> EITHER EXPRESS OR IMPLIED.
>
> #include <Ppi/UsbController.h>
> #include <Ppi/Usb2HostController.h>
> +#include <Ppi/IoMmu.h>
> +#include <Ppi/EndOfPeiPhase.h>
>
> #include <Library/DebugLib.h>
> #include <Library/PeimEntryPoint.h>
> @@ -94,7 +96,13 @@ typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;
> struct _PEI_USB2_HC_DEV {
> UINTN Signature;
> PEI_USB2_HOST_CONTROLLER_PPI Usb2HostControllerPpi;
> - EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
> + EDKII_IOMMU_PPI *IoMmu;
> + EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
> + //
> + // EndOfPei callback is used to stop the XHC DMA operation
> + // after exit PEI phase.
> + //
> + EFI_PEI_NOTIFY_DESCRIPTOR EndOfPeiNotifyList;
> UINT32 UsbHostControllerBaseAddress;
> PEI_URB *Urb;
> USBHC_MEM_POOL *MemPool;
> @@ -122,7 +130,6 @@ struct _PEI_USB2_HC_DEV {
> // Periodic (interrupt) transfer schedule data:
> //
> VOID *PeriodFrame; // Mapped as
> common buffer
> - VOID *PeriodFrameHost;
> VOID *PeriodFrameMap;
>
> PEI_EHC_QH *PeriodOne;
> @@ -138,6 +145,7 @@ struct _PEI_USB2_HC_DEV {
> };
>
> #define PEI_RECOVERY_USB_EHC_DEV_FROM_EHCI_THIS(a) CR (a,
> PEI_USB2_HC_DEV, Usb2HostControllerPpi, USB2_HC_DEV_SIGNATURE)
> +#define PEI_RECOVERY_USB_EHC_DEV_FROM_THIS_NOTIFY(a) CR (a,
> PEI_USB2_HC_DEV, EndOfPeiNotifyList, USB2_HC_DEV_SIGNATURE)
>
> /**
> @param EhcDev EHCI Device.
> @@ -173,7 +181,8 @@ UsbHcInitMemPool (
>
> /**
> Release the memory management pool.
> -
> +
> + @param Ehc The EHCI device.
> @param Pool The USB memory pool to free.
>
> @retval EFI_DEVICE_ERROR Fail to free the memory pool.
> @@ -182,6 +191,7 @@ UsbHcInitMemPool (
> **/
> EFI_STATUS
> UsbHcFreeMemPool (
> + IN PEI_USB2_HC_DEV *Ehc,
> IN USBHC_MEM_POOL *Pool
> )
> ;
> @@ -208,6 +218,7 @@ UsbHcAllocateMem (
> /**
> Free the allocated memory back to the memory pool.
>
> + @param Ehc The EHCI device.
> @param Pool The memory pool of the host controller.
> @param Mem The memory to free.
> @param Size The size of the memory to free.
> @@ -215,10 +226,110 @@ UsbHcAllocateMem (
> **/
> VOID
> UsbHcFreeMem (
> + IN PEI_USB2_HC_DEV *Ehc,
> IN USBHC_MEM_POOL *Pool,
> IN VOID *Mem,
> IN UINTN Size
> )
> ;
>
> +/**
> + Provides the controller-specific addresses required to access system memory
> from a
> + DMA bus master.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Operation Indicates if the bus master is going to read
> or write to system memory.
> + @param HostAddress The system memory address to map to
> the PCI controller.
> + @param NumberOfBytes On input the number of bytes to map.
> On output the number of bytes
> + that were mapped.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The range was mapped for the returned
> NumberOfBytes.
> + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a
> common buffer.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The request could not be completed due
> to a lack of resources.
> + @retval EFI_DEVICE_ERROR The system hardware could not map the
> requested address.
> +
> +**/
> +EFI_STATUS
> +IoMmuMap (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN EDKII_IOMMU_OPERATION Operation,
> + IN VOID *HostAddress,
> + IN OUT UINTN *NumberOfBytes,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + );
> +
> +/**
> + Completes the Map() operation and releases any corresponding resources.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuUnmap (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN VOID *Mapping
> + );
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + );
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param IoMmu Pointer to IOMMU PPI.
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN EDKII_IOMMU_PPI *IoMmu,
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + );
> +
> +/**
> + Initialize IOMMU.
> +
> + @param IoMmu Pointer to pointer to IOMMU PPI.
> +
> +**/
> +VOID
> +IoMmuInit (
> + OUT EDKII_IOMMU_PPI **IoMmu
> + );
> +
> #endif
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
> b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
> index 7083f8668150..813ccc94507d 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
> @@ -4,7 +4,7 @@
> # It produces gPeiUsb2HostControllerPpiGuid based on
> gPeiUsbControllerPpiGuid
> # which is used to enable recovery function from USB Drivers.
> #
> -# Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions
> @@ -43,6 +43,7 @@ [Sources]
> EhciSched.h
> EhciUrb.h
> UsbHcMem.h
> + DmaMem.c
>
>
> [Packages]
> @@ -61,7 +62,8 @@ [LibraryClasses]
> [Ppis]
> gPeiUsb2HostControllerPpiGuid ## PRODUCES
> gPeiUsbControllerPpiGuid ## CONSUMES
> -
> + gEdkiiIoMmuPpiGuid ## CONSUMES
> + gEfiEndOfPeiSignalPpiGuid ## CONSUMES
>
> [Depex]
> gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND
> gEfiPeiBootInRecoveryModePpiGuid
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
> b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
> index e992d4f28797..606a53db1da1 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
> @@ -2,7 +2,7 @@
> PEIM to produce gPeiUsb2HostControllerPpiGuid based on
> gPeiUsbControllerPpiGuid
> which is used to enable recovery function from USB Drivers.
>
> -Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -107,11 +107,13 @@ EhcInitSched (
> IN PEI_USB2_HC_DEV *Ehc
> )
> {
> + VOID *Buf;
> EFI_PHYSICAL_ADDRESS PhyAddr;
> VOID *Map;
> UINTN Index;
> UINT32 *Desc;
> EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS PciAddr;
>
> //
> // First initialize the periodical schedule data:
> @@ -124,15 +126,19 @@ EhcInitSched (
> // The Frame List ocupies 4K bytes,
> // and must be aligned on 4-Kbyte boundaries.
> //
> - Status = PeiServicesAllocatePages (
> - EfiBootServicesCode,
> + Status = IoMmuAllocateBuffer (
> + Ehc->IoMmu,
> 1,
> - &PhyAddr
> + &Buf,
> + &PhyAddr,
> + &Map
> );
>
> - Map = NULL;
> - Ehc->PeriodFrameHost = (VOID *)(UINTN)PhyAddr;
> - Ehc->PeriodFrame = (VOID *)(UINTN)PhyAddr;
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + Ehc->PeriodFrame = Buf;
> Ehc->PeriodFrameMap = Map;
> Ehc->High32bitAddr = EHC_HIGH_32BIT (PhyAddr);
>
> @@ -161,19 +167,20 @@ EhcInitSched (
> // Initialize the frame list entries then set the registers
> //
> Desc = (UINT32 *) Ehc->PeriodFrame;
> -
> + PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool,
> Ehc->PeriodOne, sizeof (PEI_EHC_QH));
> for (Index = 0; Index < EHC_FRAME_LEN; Index++) {
> - Desc[Index] = QH_LINK (Ehc->PeriodOne, EHC_TYPE_QH, FALSE);
> + Desc[Index] = QH_LINK (PciAddr, EHC_TYPE_QH, FALSE);
> }
>
> - EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT
> (Ehc->PeriodFrame));
> + EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT
> (PhyAddr));
>
> //
> // Second initialize the asynchronous schedule:
> // Only need to set the AsynListAddr register to
> // the reclamation header
> //
> - EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT
> (Ehc->ReclaimHead));
> + PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool,
> Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
> + EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT
> (PciAddr));
> return EFI_SUCCESS;
> }
>
> @@ -192,26 +199,27 @@ EhcFreeSched (
> EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, 0);
>
> if (Ehc->PeriodOne != NULL) {
> - UsbHcFreeMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
> + UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->PeriodOne, sizeof
> (PEI_EHC_QH));
> Ehc->PeriodOne = NULL;
> }
>
> if (Ehc->ReclaimHead != NULL) {
> - UsbHcFreeMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof
> (PEI_EHC_QH));
> + UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ReclaimHead, sizeof
> (PEI_EHC_QH));
> Ehc->ReclaimHead = NULL;
> }
>
> if (Ehc->ShortReadStop != NULL) {
> - UsbHcFreeMem (Ehc->MemPool, Ehc->ShortReadStop, sizeof
> (PEI_EHC_QTD));
> + UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ShortReadStop, sizeof
> (PEI_EHC_QTD));
> Ehc->ShortReadStop = NULL;
> }
>
> if (Ehc->MemPool != NULL) {
> - UsbHcFreeMemPool (Ehc->MemPool);
> + UsbHcFreeMemPool (Ehc, Ehc->MemPool);
> Ehc->MemPool = NULL;
> }
>
> if (Ehc->PeriodFrame != NULL) {
> + IoMmuFreeBuffer (Ehc->IoMmu, 1, Ehc->PeriodFrame,
> Ehc->PeriodFrameMap);
> Ehc->PeriodFrame = NULL;
> }
> }
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> index 597a4947f5bc..3dadcd60b6fe 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> @@ -2,7 +2,7 @@
> PEIM to produce gPeiUsb2HostControllerPpiGuid based on
> gPeiUsbControllerPpiGuid
> which is used to enable recovery function from USB Drivers.
>
> -Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -301,7 +301,7 @@ EhcFreeQtds (
> Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
>
> RemoveEntryList (&Qtd->QtdList);
> - UsbHcFreeMem (Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
> + UsbHcFreeMem (Ehc, Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
> }
> }
>
> @@ -318,13 +318,21 @@ EhcFreeUrb (
> IN PEI_URB *Urb
> )
> {
> + if (Urb->RequestPhy != NULL) {
> + IoMmuUnmap (Ehc->IoMmu, Urb->RequestMap);
> + }
> +
> + if (Urb->DataMap != NULL) {
> + IoMmuUnmap (Ehc->IoMmu, Urb->DataMap);
> + }
> +
> if (Urb->Qh != NULL) {
> //
> // Ensure that this queue head has been unlinked from the
> // schedule data structures. Free all the associated QTDs
> //
> EhcFreeQtds (Ehc, &Urb->Qh->Qtds);
> - UsbHcFreeMem (Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
> + UsbHcFreeMem (Ehc, Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
> }
> }
>
> @@ -527,13 +535,11 @@ EhcCreateUrb (
> {
> USB_ENDPOINT *Ep;
> EFI_PHYSICAL_ADDRESS PhyAddr;
> + EDKII_IOMMU_OPERATION MapOp;
> EFI_STATUS Status;
> UINTN Len;
> PEI_URB *Urb;
> VOID *Map;
> -
> -
> - Map = NULL;
>
> Urb = Ehc->Urb;
> Urb->Signature = EHC_URB_SIG;
> @@ -576,24 +582,40 @@ EhcCreateUrb (
> //
> if (Request != NULL) {
> Len = sizeof (EFI_USB_DEVICE_REQUEST);
> - PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Request ;
> - if ( (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
> + MapOp = EdkiiIoMmuOperationBusMasterRead;
> + Status = IoMmuMap (Ehc->IoMmu, MapOp, Request, &Len, &PhyAddr,
> &Map);
> +
> + if (EFI_ERROR (Status) || (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
> goto ON_ERROR;
> }
>
> Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
> Urb->RequestMap = Map;
> + } else {
> + Urb->RequestPhy = NULL;
> + Urb->RequestMap = NULL;
> }
>
> if (Data != NULL) {
> Len = DataLen;
> - PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Data ;
> - if ( (Len != DataLen)) {
> +
> + if (Ep->Direction == EfiUsbDataIn) {
> + MapOp = EdkiiIoMmuOperationBusMasterWrite;
> + } else {
> + MapOp = EdkiiIoMmuOperationBusMasterRead;
> + }
> +
> + Status = IoMmuMap (Ehc->IoMmu, MapOp, Data, &Len, &PhyAddr,
> &Map);
> +
> + if (EFI_ERROR (Status) || (Len != DataLen)) {
> goto ON_ERROR;
> }
>
> Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
> Urb->DataMap = Map;
> + } else {
> + Urb->DataPhy = NULL;
> + Urb->DataMap = NULL;
> }
>
> Status = EhcCreateQtds (Ehc, Urb);
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
> b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
> index 5f9f5f0718f3..a0419bd85722 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
> @@ -2,7 +2,7 @@
> PEIM to produce gPeiUsb2HostControllerPpiGuid based on
> gPeiUsbControllerPpiGuid
> which is used to enable recovery function from USB Drivers.
>
> -Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -79,16 +79,18 @@ UsbHcAllocMemBlock (
>
> Block->Bits = (UINT8 *)(UINTN)TempPtr;
>
> -
> - Status = PeiServicesAllocatePages (
> - EfiBootServicesCode,
> + Status = IoMmuAllocateBuffer (
> + Ehc->IoMmu,
> Pages,
> - &TempPtr
> + (VOID **) &BufHost,
> + &MappedAddr,
> + &Mapping
> );
> - ZeroMem ((VOID *)(UINTN)TempPtr, Pages*EFI_PAGE_SIZE);
> + if (EFI_ERROR (Status)) {
> + return NULL;
> + }
> + ZeroMem (BufHost, Pages*EFI_PAGE_SIZE);
>
> - BufHost = (VOID *)(UINTN)TempPtr;
> - MappedAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) BufHost;
> //
> // Check whether the data structure used by the host controller
> // should be restricted into the same 4G
> @@ -109,17 +111,21 @@ UsbHcAllocMemBlock (
> /**
> Free the memory block from the memory pool.
>
> + @param Ehc The EHCI device.
> @param Pool The memory pool to free the block from.
> @param Block The memory block to free.
>
> **/
> VOID
> UsbHcFreeMemBlock (
> + IN PEI_USB2_HC_DEV *Ehc,
> IN USBHC_MEM_POOL *Pool,
> IN USBHC_MEM_BLOCK *Block
> )
> {
> ASSERT ((Pool != NULL) && (Block != NULL));
> +
> + IoMmuFreeBuffer (Ehc->IoMmu, EFI_SIZE_TO_PAGES (Block->BufLen),
> Block->BufHost, Block->Mapping);
> }
>
> /**
> @@ -196,6 +202,54 @@ UsbHcAllocMemFromBlock (
> }
>
> /**
> + Calculate the corresponding pci bus address according to the Mem parameter.
> +
> + @param Pool The memory pool of the host controller.
> + @param Mem The pointer to host memory.
> + @param Size The size of the memory region.
> +
> + @return the pci memory address
> +**/
> +EFI_PHYSICAL_ADDRESS
> +UsbHcGetPciAddressForHostMem (
> + IN USBHC_MEM_POOL *Pool,
> + IN VOID *Mem,
> + IN UINTN Size
> + )
> +{
> + USBHC_MEM_BLOCK *Head;
> + USBHC_MEM_BLOCK *Block;
> + UINTN AllocSize;
> + EFI_PHYSICAL_ADDRESS PhyAddr;
> + UINTN Offset;
> +
> + Head = Pool->Head;
> + AllocSize = USBHC_MEM_ROUND (Size);
> +
> + if (Mem == NULL) {
> + return 0;
> + }
> +
> + for (Block = Head; Block != NULL; Block = Block->Next) {
> + //
> + // scan the memory block list for the memory block that
> + // completely contains the allocated memory.
> + //
> + if ((Block->BufHost <= (UINT8 *) Mem) && (((UINT8 *) Mem + AllocSize) <=
> (Block->BufHost + Block->BufLen))) {
> + break;
> + }
> + }
> +
> + ASSERT ((Block != NULL));
> + //
> + // calculate the pci memory address for host memory address.
> + //
> + Offset = (UINT8 *)Mem - Block->BufHost;
> + PhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN) (Block->Buf + Offset);
> + return PhyAddr;
> +}
> +
> +/**
> Insert the memory block to the pool's list of the blocks.
>
> @param Head The head of the memory pool's block list.
> @@ -316,7 +370,8 @@ UsbHcInitMemPool (
>
> /**
> Release the memory management pool.
> -
> +
> + @param Ehc The EHCI device.
> @param Pool The USB memory pool to free.
>
> @retval EFI_DEVICE_ERROR Fail to free the memory pool.
> @@ -325,6 +380,7 @@ UsbHcInitMemPool (
> **/
> EFI_STATUS
> UsbHcFreeMemPool (
> + IN PEI_USB2_HC_DEV *Ehc,
> IN USBHC_MEM_POOL *Pool
> )
> {
> @@ -337,11 +393,11 @@ UsbHcFreeMemPool (
> // UsbHcUnlinkMemBlock can't be used to unlink and free the
> // first block.
> //
> - for (Block = Pool->Head->Next; Block != NULL; Block = Pool->Head->Next) {
> - UsbHcFreeMemBlock (Pool, Block);
> + for (Block = Pool->Head->Next; Block != NULL; Block = Block->Next) {
> + UsbHcFreeMemBlock (Ehc, Pool, Block);
> }
>
> - UsbHcFreeMemBlock (Pool, Pool->Head);
> + UsbHcFreeMemBlock (Ehc, Pool, Pool->Head);
>
> return EFI_SUCCESS;
> }
> @@ -425,6 +481,7 @@ UsbHcAllocateMem (
> /**
> Free the allocated memory back to the memory pool.
>
> + @param Ehc The EHCI device.
> @param Pool The memory pool of the host controller.
> @param Mem The memory to free.
> @param Size The size of the memory to free.
> @@ -432,6 +489,7 @@ UsbHcAllocateMem (
> **/
> VOID
> UsbHcFreeMem (
> + IN PEI_USB2_HC_DEV *Ehc,
> IN USBHC_MEM_POOL *Pool,
> IN VOID *Mem,
> IN UINTN Size
> @@ -486,7 +544,7 @@ UsbHcFreeMem (
> // Release the current memory block if it is empty and not the head
> //
> if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
> - UsbHcFreeMemBlock (Pool, Block);
> + UsbHcFreeMemBlock (Ehc, Pool, Block);
> }
>
> return ;
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
> b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
> index 586d12af9658..717a8c822c90 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
> @@ -1,7 +1,7 @@
> /** @file
> Private Header file for Usb Host Controller PEIM
>
> -Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions
> @@ -74,4 +74,20 @@ typedef struct _USBHC_MEM_POOL {
> } while (0)
>
>
> +/**
> + Calculate the corresponding pci bus address according to the Mem parameter.
> +
> + @param Pool The memory pool of the host controller.
> + @param Mem The pointer to host memory.
> + @param Size The size of the memory region.
> +
> + @return the pci memory address
> +**/
> +EFI_PHYSICAL_ADDRESS
> +UsbHcGetPciAddressForHostMem (
> + IN USBHC_MEM_POOL *Pool,
> + IN VOID *Mem,
> + IN UINTN Size
> + );
> +
> #endif
> --
> 2.7.0.windows.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-11-17 2:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-16 10:03 [PATCH V2] MdeModulePkg EhciPei: Support IoMmu Star Zeng
2017-11-17 2:32 ` Yao, Jiewen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox