From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: Supreeth Venkatesh <supreeth.venkatesh@arm.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
"achin.gupta@arm.com" <achin.gupta@arm.com>,
"leif.lindholm@linaro.org" <leif.lindholm@linaro.org>,
"ard.biesheuvel@linaro.org" <ard.biesheuvel@linaro.org>
Subject: Re: [PATCH v1 00/18] *** Standalone Management Mode Core Interface for AARCH64 Platforms ***
Date: Sun, 8 Apr 2018 06:01:53 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C503AB4CAE1@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20180406144223.10931-1-supreeth.venkatesh@arm.com>
Thank you for this great work.
Comment below:
1) I don't have comment for ArmPkg update (0001~0005, 0015) - I expect Arm expert will help on that. :-)
2) BaseTool (0016), reviewed-by: Jiewen.yao@intel.com
3) StandaloneMmPkg
3.1) 0007 - I think we need add ExHeader check and alignment enforcement for FfsFileHeader.
FfsFileHeader = (EFI_FFS_FILE_HEADER *) ((UINT8 *) FwVolHeader + FwVolHeader->HeaderLength);
You may refer to https://github.com/tianocore/edk2/blob/master/SignedCapsulePkg/Library/EdkiiSystemCapsuleLib/EdkiiSystemCapsuleLib.c GetFfsByName()
if (FvHeader->ExtHeaderOffset != 0) {
FvExtHeader = (EFI_FIRMWARE_VOLUME_EXT_HEADER *)((UINT8 *)FvHeader + FvHeader->ExtHeaderOffset);
FfsHeader = (EFI_FFS_FILE_HEADER *)((UINT8 *)FvExtHeader + FvExtHeader->ExtHeaderSize);
} else {
FfsHeader = (EFI_FFS_FILE_HEADER *)((UINT8 *)FvHeader + FvHeader->HeaderLength);
}
FfsHeader = (EFI_FFS_FILE_HEADER *)((UINTN)FvHeader + ALIGN_VALUE((UINTN)FfsHeader - (UINTN)FvHeader, 8));
3.2) 0008 - I think we need rename MmCopyMemToSmram to MmCopyMemToMmram, and MmCopyMemFromSmram to MmCopyMemFromMmram.
Also if this MemLib is only for MM_STANDALONE, we should name it StandaloneMmMemLib.
3.3) 0009 - If this MemoryAllocationLib is only for MM_CORE_STANDALONE, we should name it StandaloneMmCoreMemoryAllocationLib.
Also do we need StandaloneMmMemoryAllocationLib (non-Core version) for MmDriver ?
(You may find that my POC zip has both StandaloneSmmCoreMemoryAllocationLib and StandaloneSmmMemoryAllocationLib.)
3.4) 0010 - If this HobLib is only for MM_STANDALONE, we should name it StandaloneMmHobLib.
3.5) 0014 - I do not believe we should add FDF file here. StandaloneMmPkg should only provide the component. (such as MdeModulePkg). The FDF file should be in a real project.
3.6) 0017/0018 - they are only for unit test. I do not think we should check in them. Please discard them when you check in the series.
3.x) 0006/0011/0012/0013, they are good so far. We may do some enhancement to move common logic out of Arm directory. But that can be done later, when we add X86 content there. reviewed-by: Jiewen.yao@intel.com
Thank you
Yao Jiewen
> -----Original Message-----
> From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> Sent: Friday, April 6, 2018 10:42 PM
> To: edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>;
> achin.gupta@arm.com; leif.lindholm@linaro.org; ard.biesheuvel@linaro.org;
> Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> Subject: [PATCH v1 00/18] *** Standalone Management Mode Core Interface
> for AARCH64 Platforms ***
>
> ***
> PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> introduces the concept of MM Standalone Mode. Initialization of this mode
> can be done during the SEC phase (Section 1.5.2).
> On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
> the normal world firmware e.g. UEFI.
>
> The Standalone MM environment is instantiated in Secure EL0 as a separate
> firmware volume. It executes as BL32 Image under control of ARM TF
> which is instantiated in EL3. Both components execute in the AArch64 execution
> state.
> This patchset will build upon the StandaloneSmmPkg module originally
> contributed by Intel.
>
> This package can be used in conjunction with ARM Trusted Firmware
> to recreate a simple MM secure environment that demonstrates communication
> between two UEFI images where one is executing in the normal world and the
> other is
> executing in the secure world.
>
> The normal world image includes:
> MM Communication DXE runtime driver that implements the protocol for
> communication
> with the MM environment in the secure world.
>
> The secure world image includes:
> The MM Standalone framework.
>
> This patchset includes the proposed organization/structure.
> In order to be able to review the changes more effectively, the changes are
> present here:
> https://github.com/supven01/edk2.git (Branch: master)
>
> Steps to build MM Standalone images
> In user preferred "work" directory, execute the following shell commands
>
> git clone https://github.com/tianocore/edk2.git
> git checkout master
>
> git clone https://github.com/tianocore/edk2-platforms.git
> git checkout master
>
> mkdir arm-tf
> cd arm-tf
> git clone https://github.com/ARM-software/arm-trusted-firmware.git .
> git checkout master
> cd ..
>
> git clone https://git.linaro.org/uefi/uefi-tools.git .
> git checkout master
>
> The following will build the MM Standalone image which runs in secure world.
> ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
>
> The follwing will build the normal world UEFI image, ARM Trusted Firmware and
> a Firmware Image Package (FIP) that includes both the UEFI images.
> ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
>
> Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image
> package (fip) binary will be generated at:
>
> Build Output
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
>
> Steps to run MM Standalone image
> 1. Download the ARMv8 Architecture FVP from
>
> https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> For more information, please refer
>
> https://developer.arm.com/products/system-design/fixed-virtual-platforms
> 2. Install FVP into preferred "work" directory.
> 3. Create a shell script "run_mm.sh" in the same folder where
> "FVP_Base_AEMv8A-AEMv8A" is present.
> Sample Shell script below:
> ./FVP_Base_AEMv8A-AEMv8A
> -C cache_state_modelled=0
> -C bp.secure_memory=1
> -C bp.tzc_400.diagnostics=1
> -C bp.pl011_uart0.untimed_fifos=0
> -C cluster1.NUM_CORES=4
> -C cluster0.NUM_CORES=4
> -C bp.pl011_uart0.out_file=uart0.output
> -C bp.pl011_uart1.out_file=uart1.output
> -C bp.pl011_uart2.out_file=uart2.output
> -C bp.pl011_uart3.out_file=uart3.output
> -C bp.secureflashloader.fname=""
> -C bp.flashloader0.fname=""
> -S -R
> 4. ./run_mm.sh
> 5. Output can be seen on FVP console.
> 6. The normal world will boot to the UEFI shell.
>
> Sample Output
>
> MM Standalone Output (FVP UART2)
> SPM Version: Major=0x0, Minor=0x1
> NumSpMemRegions - 0x6
> SpMemBase - 0xFF200000
> SpMemLimit - 0x100000000
> SpImageBase - 0xFF200000
> SpStackBase - 0xFF610000
> SpHeapBase - 0xFF620000
> SpNsCommBufBase - 0xFF600000
> SpSharedBufBase - 0xFF500000
> SpImageSize - 0x300000
> SpPcpuStackSize - 0x2000
> SpHeapSize - 0x9E0000
> SpNsCommBufSize - 0x10000
> SpPcpuSharedBufSize - 0x20000
> NumCpus - 0x8
> CpuInfo - 0xFF500680
> Mpidr - 0x80000000
> LinearId - 0x0
> Flags - 0x1
> Mpidr - 0x80000001
> LinearId - 0x1
> Flags - 0x0
> Mpidr - 0x80000002
> LinearId - 0x2
> Flags - 0x0
> Mpidr - 0x80000003
> LinearId - 0x3
> Flags - 0x0
> Mpidr - 0x80000100
> LinearId - 0x4
> Flags - 0x0
> Mpidr - 0x80000101
> LinearId - 0x5
> Flags - 0x0
> Mpidr - 0x80000102
> LinearId - 0x6
> Flags - 0x0
> Mpidr - 0x80000103
> LinearId - 0x7
> Flags - 0x0
> Found Standalone MM PE data - 0xFF201000
> Found Standalone MM PE data - 0xFF201000
> Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections
> - 3
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000
> has .et name
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0xFF202000 address
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0x1000 data
> UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at
> 0xFF201000 with 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0xC0000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000
> has .aa name
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0xFF217000 address
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0x16000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> 0xFF201000 with RW-XN permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0x42000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000
> has .eo name
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0xFF218000 address
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0x17000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> 0xFF201000 with RO-XN permissions
> StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> MmInitializeMemoryServices
> MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> MmMain - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x300000
> MmramRanges[1]: 0x00000000FF500000 - 0x100000
> MmramRanges[2]: 0x00000000FF600000 - 0x10000
> MmramRanges[3]: 0x00000000FF610000 - 0x10000
> MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> mMmramRangeCount - 0x6
> mMmramRanges - 0xFFFFEE10
> BFV address - 0xFF200000
> BFV size - 0x300000
> MmInstallConfigurationTable For HobList
> HobSize - 0x2C8
> MmHobStart - 0xFFFFE810
> MmRegisterProtocolNotify - MmConfigurationMmProtocol
> Mm Dispatch StandaloneBfvAddress - 0xFF200000
> MmCoreFfsFindMmDriver - 0xFF200000
> FvIsBeingProcesssed - 0xFF200000
> Check MmFileTypes - 0xA
> Check MmFileTypes - 0xE
> Find PE data - 0xFF219024
> MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C
> (0xFF219024)
> MmDispatcher
> Drain the Scheduled Queue
> Search DriverList for items to place on Scheduled Queue
> DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> TRUE
> END
> RESULT = TRUE
> Drain the Scheduled Queue
> DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with
> RO-XN permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X
> permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with
> RW-XN permissions and size 0x1000
> UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with
> RO-XN permissions and size 0x1000
> add-symbol-file
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> PiMmStandloneArmTfCpuDriver.efi
> StartImage - 0xFFFE7000 (Standalone Mode)
> MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> FFFEE008
> MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> FFFEE008
> MM Core registered MM Entry Point address FF2041C0
> MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> FFFEE018
> Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> mNsCommBuffer.PhysicalStart - 0xFF600000
> mNsCommBuffer.PhysicalSize - 0x10000
> mNsCommBuffer: 0x00000000FF600000 - 0x10000
> mMpInformationHobData: 0x0000000000000008 - 0x8
> mMpInformationHobData[0x80000000]: 0, 0, 0
> mMpInformationHobData[0x80000001]: 0, 1, 1
> mMpInformationHobData[0x80000002]: 0, 2, 2
> mMpInformationHobData[0x80000003]: 0, 3, 3
> mMpInformationHobData[0x80000100]: 1, 0, 0
> mMpInformationHobData[0x80000101]: 1, 1, 1
> mMpInformationHobData[0x80000102]: 1, 2, 2
> mMpInformationHobData[0x80000103]: 1, 3, 3
> MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF -
> Status 0
> MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> Status 0
> MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status
> 0
> MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> Status 0
> MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status
> 0
> MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> Status 0
> MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B -
> Status 0
> MmMain Done!
> Shared Cpu Driver EP 0xFFFE798C
>
> ARM TF (FVP UART0)
> NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> INFO: BL1: RAM 0x4036000 - 0x403c000
> INFO: BL1: Loading BL2
> INFO: Loading image id=1 at address 0x4027000
> INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> NOTICE: BL1: Booting BL2
> INFO: Entry point address = 0x4027000
> INFO: SPSR = 0x3c5
> NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> INFO: BL2: Doing platform setup
> INFO: Configuring TrustZone Controller
> INFO: BL2: Loading image id 3
> INFO: Loading image id=3 at address 0xff000000
> INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> INFO: BL2: Loading image id 4
> INFO: Loading image id=4 at address 0xff200000
> INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> INFO: BL2: Loading image id 5
> INFO: Loading image id=5 at address 0x88000000
> INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> NOTICE: BL1: Booting BL31
> INFO: Entry point address = 0xff000000
> INFO: SPSR = 0x3cd
> NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in
> EL3
> INFO: BL31: Initializing runtime services
> INFO: BL31: Initializing BL32
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x5
> NOTICE: (Equivalent TF attributes: 0x2a)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff218000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x3
> NOTICE: (Equivalent TF attributes: 0x2)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffef000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> INFO: BL31: Preparing for EL3 exit to normal world
> INFO: Entry point address = 0x88000000
> INFO: SPSR = 0x3c9
> UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> ***
>
> Supreeth Venkatesh (18):
> ArmPkg: Add PCDs needed for MM communication driver.
> ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
> ArmPkg/Include: Add MM interface SVC return codes.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> StandaloneMmPkg: Add an AArch64 specific entry point library.
> StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
> StandaloneMmPkg/MemLib: AARCH64 Specific instance of memory check
> library.
> StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
> StandaloneMmPkg/HobLib: Add AARCH64 Specific HOB Library for
> management mode.
> StandaloneMmPkg: MM driver entry point library.
> StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Platforms.
> StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
> StandaloneMmPkg: Describe the declaration, definition and fdf files.
> ArmPkg: Extra action to update permissions for S-ELO MM Image.
> BaseTools/AutoGen: Update header file for MM modules.
> StandaloneMmPkg: Add application to test MM communication protocol.
> StandaloneMmPkg: Add handler to handle event received from Normal
> World.
>
> ArmPkg/ArmPkg.dec | 3 +
> .../Drivers/MmCommunicationDxe/MmCommunication.c | 339 +++++++
> .../Drivers/MmCommunicationDxe/MmCommunication.inf | 50 +
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
> ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> .../DebugPeCoffExtraActionLib.c | 185 +++-
> .../DebugPeCoffExtraActionLib.inf | 7 +
> BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> .../Application/MmCommTestApp/MmCommTest.c | 81 ++
> .../Application/MmCommTestApp/MmCommTest.h | 37 +
> .../Application/MmCommTestApp/MmCommTest.inf | 57 ++
> StandaloneMmPkg/Core/Dependency.c | 389 +++++++
> StandaloneMmPkg/Core/Dispatcher.c | 1071
> ++++++++++++++++++++
> StandaloneMmPkg/Core/FwVol.c | 104 ++
> StandaloneMmPkg/Core/Handle.c | 533
> ++++++++++
> StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> StandaloneMmPkg/Core/Locate.c | 496 +++++++++
> StandaloneMmPkg/Core/Mmi.c | 337 ++++++
> StandaloneMmPkg/Core/Notify.c | 203 ++++
> StandaloneMmPkg/Core/Page.c | 384 +++++++
> StandaloneMmPkg/Core/Pool.c | 287 ++++++
> StandaloneMmPkg/Core/StandaloneMmCore.c | 747
> ++++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> +++++++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.inf | 82 ++
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 229 +++++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
> StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
> StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> StandaloneMmPkg/Library/HobLib/Arm/HobLib.c | 697
> +++++++++++++
> StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> StandaloneMmPkg/Library/MemLib/Arm/MemLib.c | 276 +++++
> StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> .../MemoryAllocationLib/MemoryAllocationLib.c | 907
> +++++++++++++++++
> .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> .../MemoryAllocationLib/MemoryAllocationServices.h | 38 +
> .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> .../Arm/SetPermissions.c | 278 +++++
> .../Arm/StandaloneMmCoreEntryPoint.c | 264 +++++
> .../StandaloneMmCoreEntryPoint.inf | 53 +
> .../StandaloneMmDriverEntryPoint.c | 102 ++
> .../StandaloneMmDriverEntryPoint.inf | 41 +
> StandaloneMmPkg/StandaloneMmPkg.dec | 49 +
> StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
> StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
> StandaloneMmPkg => StandaloneMmPkg~HEAD | 0
> 61 files changed, 12244 insertions(+), 20 deletions(-)
> create mode 100644
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.c
> create mode 100644
> ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> create mode 100644
> StandaloneMmPkg/Application/MmCommTestApp/MmCommTest.c
> create mode 100644
> StandaloneMmPkg/Application/MmCommTestApp/MmCommTest.h
> create mode 100644
> StandaloneMmPkg/Application/MmCommTestApp/MmCommTest.inf
> create mode 100644 StandaloneMmPkg/Core/Dependency.c
> create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> create mode 100644 StandaloneMmPkg/Core/FwVol.c
> create mode 100644 StandaloneMmPkg/Core/Handle.c
> create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
> create mode 100644 StandaloneMmPkg/Core/Locate.c
> create mode 100644 StandaloneMmPkg/Core/Mmi.c
> create mode 100644 StandaloneMmPkg/Core/Notify.c
> create mode 100644 StandaloneMmPkg/Core/Page.c
> create mode 100644 StandaloneMmPkg/Core/Pool.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> create mode 100644
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> create mode 100644
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> create mode 100644
> StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> create mode 100644
> StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> create mode 100644
> StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> create mode 100644 StandaloneMmPkg/Library/HobLib/Arm/HobLib.c
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemLib/Arm/MemLib.c
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServices.h
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobList.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissions.
> c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> CoreEntryPoint.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreE
> ntryPoint.inf
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriv
> erEntryPoint.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriv
> erEntryPoint.inf
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> rename StandaloneMmPkg => StandaloneMmPkg~HEAD (100%)
>
> --
> 2.16.2
next prev parent reply other threads:[~2018-04-08 6:01 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-06 14:42 [PATCH v1 00/18] *** Standalone Management Mode Core Interface for AARCH64 Platforms *** Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 01/18] ArmPkg: Add PCDs needed for MM communication driver Supreeth Venkatesh
2018-04-11 14:43 ` Achin Gupta
[not found] ` <AM4PR0802MB23063743A3B2F5A552BE320580870@AM4PR0802MB2306.eurprd08.prod.outlook.com>
2018-05-04 23:13 ` Supreeth Venkatesh
2018-05-04 23:17 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 02/18] ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver Supreeth Venkatesh
2018-04-11 14:00 ` Achin Gupta
2018-05-04 23:18 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 03/18] ArmPkg/Include: Add MM interface SVC return codes Supreeth Venkatesh
2018-04-11 14:38 ` Achin Gupta
2018-05-04 23:19 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 04/18] ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0 Supreeth Venkatesh
2018-04-11 19:21 ` Achin Gupta
2018-05-04 23:19 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 05/18] ArmPkg/ArmMmuLib: Add MMU library inf file " Supreeth Venkatesh
2018-04-11 19:24 ` Achin Gupta
2018-05-04 23:19 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 06/18] StandaloneMmPkg: Add an AArch64 specific entry point library Supreeth Venkatesh
2018-04-16 14:04 ` Achin Gupta
2018-05-04 23:20 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 07/18] StandaloneMmPkg/FvLib: Add a common FV Library for management mode Supreeth Venkatesh
2018-04-16 14:44 ` Achin Gupta
2018-05-04 23:21 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 08/18] StandaloneMmPkg/MemLib: AARCH64 Specific instance of memory check library Supreeth Venkatesh
2018-04-16 15:12 ` Achin Gupta
2018-04-16 22:30 ` Yao, Jiewen
2018-04-25 10:35 ` Achin Gupta
2018-04-26 13:02 ` Yao, Jiewen
2018-05-04 23:21 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 09/18] StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library Supreeth Venkatesh
2018-04-25 14:33 ` Achin Gupta
2018-04-26 13:05 ` Yao, Jiewen
2018-05-04 23:23 ` Supreeth Venkatesh
2018-05-04 23:21 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 10/18] StandaloneMmPkg/HobLib: Add AARCH64 Specific HOB Library for management mode Supreeth Venkatesh
2018-04-25 14:50 ` Achin Gupta
2018-04-26 13:04 ` Yao, Jiewen
2018-05-04 23:22 ` Supreeth Venkatesh
2018-05-04 23:25 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 11/18] StandaloneMmPkg: MM driver entry point library Supreeth Venkatesh
2018-04-30 14:29 ` Achin Gupta
2018-05-04 23:24 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 12/18] StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Platforms Supreeth Venkatesh
2018-04-18 22:09 ` Daniil Egranov
2018-05-04 23:25 ` Supreeth Venkatesh
2018-04-30 15:50 ` Achin Gupta
2018-05-04 23:24 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 13/18] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module Supreeth Venkatesh
2018-04-30 19:19 ` Achin Gupta
2018-04-30 19:28 ` Ard Biesheuvel
2018-04-30 20:17 ` Achin Gupta
2018-05-01 8:18 ` Laszlo Ersek
2018-05-04 23:28 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 14/18] StandaloneMmPkg: Describe the declaration, definition and fdf files Supreeth Venkatesh
2018-04-18 19:50 ` Daniil Egranov
2018-05-04 23:29 ` Supreeth Venkatesh
2018-04-30 19:32 ` Achin Gupta
2018-05-04 23:28 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 15/18] ArmPkg: Extra action to update permissions for S-ELO MM Image Supreeth Venkatesh
2018-04-30 19:49 ` Achin Gupta
2018-05-04 23:30 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 16/18] BaseTools/AutoGen: Update header file for MM modules Supreeth Venkatesh
2018-04-30 19:52 ` Achin Gupta
2018-05-04 23:30 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 17/18] StandaloneMmPkg: Add application to test MM communication protocol Supreeth Venkatesh
2018-04-30 20:02 ` Achin Gupta
2018-05-04 23:31 ` Supreeth Venkatesh
2018-04-06 14:42 ` [PATCH v1 18/18] StandaloneMmPkg: Add handler to handle event received from Normal World Supreeth Venkatesh
2018-04-08 6:01 ` Yao, Jiewen [this message]
2018-05-04 23:15 ` [PATCH v1 00/18] *** Standalone Management Mode Core Interface for AARCH64 Platforms *** Supreeth Venkatesh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C503AB4CAE1@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox