From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Kinney, Michael D" <michael.d.kinney@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: [Patch v3 3/3] SignedCapsulePkg/PlatformFlashAccessLib: Add progress API
Date: Mon, 28 May 2018 19:18:04 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C503AC127D3@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20180525061552.19840-4-michael.d.kinney@intel.com>
Reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Thursday, May 24, 2018 11:16 PM
> To: edk2-devel@lists.01.org
> Cc: Yao, Jiewen <jiewen.yao@intel.com>
> Subject: [Patch v3 3/3] SignedCapsulePkg/PlatformFlashAccessLib: Add progress
> API
>
> https://bugzilla.tianocore.org/show_bug.cgi?id=801
>
> Add a new API to the PlatformFlashAccessLib that passes
> in an optional Progress() function along with a start and
> end percentage to call the Progress() function with.
> If the Progress() function is not NULL, then it is the
> Progress() function that was passed into the Firmware
> Management Protocol SetImage() services and is used
> to update the user on the progress as a firmware device
> is updated with a firmware image.
>
> Implementations of the PlatformFlashAccessLib are
> recommended to call the Progress() function as work
> is performed to update to contents of a firmware
> storage device.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> ---
> .../Include/Library/PlatformFlashAccessLib.h | 49 ++++++++++++++-
> .../PlatformFlashAccessLibNull.c | 70
> +++++++++++++++++++---
> 2 files changed, 110 insertions(+), 9 deletions(-)
>
> diff --git a/SignedCapsulePkg/Include/Library/PlatformFlashAccessLib.h
> b/SignedCapsulePkg/Include/Library/PlatformFlashAccessLib.h
> index 0a8858e4c4..e3308251c2 100644
> --- a/SignedCapsulePkg/Include/Library/PlatformFlashAccessLib.h
> +++ b/SignedCapsulePkg/Include/Library/PlatformFlashAccessLib.h
> @@ -1,7 +1,7 @@
> /** @file
> Platform flash device access library.
>
> - Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> + Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions of the BSD
> License
> which accompanies this distribution. The full text of the license may be
> found at
> @@ -16,6 +16,8 @@
> #ifndef __PLATFORM_FLASH_ACCESS_LIB_H__
> #define __PLATFORM_FLASH_ACCESS_LIB_H__
>
> +#include <Protocol/FirmwareManagement.h>
> +
> typedef enum {
> FlashAddressTypeRelativeAddress,
> FlashAddressTypeAbsoluteAddress,
> @@ -31,7 +33,7 @@ typedef enum {
> } PLATFORM_FIRMWARE_TYPE;
>
> /**
> - Perform flash write opreation.
> + Perform flash write operation.
>
> @param[in] FirmwareType The type of firmware.
> @param[in] FlashAddress The address of flash device to be accessed.
> @@ -54,4 +56,47 @@ PerformFlashWrite (
> IN UINTN Length
> );
>
> +/**
> + Perform flash write operation with progress indicator. The start and end
> + completion percentage values are passed into this function. If the
> requested
> + flash write operation is broken up, then completion percentage between the
> + start and end values may be passed to the provided Progress function. The
> + caller of this function is required to call the Progress function for the
> + start and end completion percentage values. This allows the Progress,
> + StartPercentage, and EndPercentage parameters to be ignored if the
> requested
> + flash write operation can not be broken up
> +
> + @param[in] FirmwareType The type of firmware.
> + @param[in] FlashAddress The address of flash device to be accessed.
> + @param[in] FlashAddressType The type of flash device address.
> + @param[in] Buffer The pointer to the data buffer.
> + @param[in] Length The length of data buffer in bytes.
> + @param[in] Progress A function used report the progress of the
> + firmware update. This is an optional
> parameter
> + that may be NULL.
> + @param[in] StartPercentage The start completion percentage value that
> may
> + be used to report progress during the flash
> + write operation.
> + @param[in] EndPercentage The end completion percentage value that
> may
> + be used to report progress during the flash
> + write operation.
> +
> + @retval EFI_SUCCESS The operation returns successfully.
> + @retval EFI_WRITE_PROTECTED The flash device is read only.
> + @retval EFI_UNSUPPORTED The flash device access is unsupported.
> + @retval EFI_INVALID_PARAMETER The input parameter is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +PerformFlashWriteWithProgress (
> + IN PLATFORM_FIRMWARE_TYPE FirmwareType,
> + IN EFI_PHYSICAL_ADDRESS FlashAddress,
> + IN FLASH_ADDRESS_TYPE
> FlashAddressType,
> + IN VOID *Buffer,
> + IN UINTN Length,
> + IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress,
> OPTIONAL
> + IN UINTN StartPercentage,
> + IN UINTN EndPercentage
> + );
> +
> #endif
> diff --git
> a/SignedCapsulePkg/Library/PlatformFlashAccessLibNull/PlatformFlashAccessLib
> Null.c
> b/SignedCapsulePkg/Library/PlatformFlashAccessLibNull/PlatformFlashAccessLib
> Null.c
> index b34ebbba1e..854f108cf4 100644
> ---
> a/SignedCapsulePkg/Library/PlatformFlashAccessLibNull/PlatformFlashAccessLib
> Null.c
> +++
> b/SignedCapsulePkg/Library/PlatformFlashAccessLibNull/PlatformFlashAccessLib
> Null.c
> @@ -1,7 +1,7 @@
> /** @file
> Platform flash device access library NULL instance.
>
> - Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> + Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> This program and the accompanying materials
> are licensed and made available under the terms and conditions of the BSD
> License
> which accompanies this distribution. The full text of the license may be
> found at
> @@ -20,7 +20,57 @@
> UINT64 mInternalFdAddress;
>
> /**
> - Perform flash write opreation.
> + Perform flash write operation with progress indicator. The start and end
> + completion percentage values are passed into this function. If the
> requested
> + flash write operation is broken up, then completion percentage between the
> + start and end values may be passed to the provided Progress function. The
> + caller of this function is required to call the Progress function for the
> + start and end completion percentage values. This allows the Progress,
> + StartPercentage, and EndPercentage parameters to be ignored if the
> requested
> + flash write operation can not be broken up
> +
> + @param[in] FirmwareType The type of firmware.
> + @param[in] FlashAddress The address of flash device to be accessed.
> + @param[in] FlashAddressType The type of flash device address.
> + @param[in] Buffer The pointer to the data buffer.
> + @param[in] Length The length of data buffer in bytes.
> + @param[in] Progress A function used report the progress of the
> + firmware update. This is an optional
> parameter
> + that may be NULL.
> + @param[in] StartPercentage The start completion percentage value that
> may
> + be used to report progress during the flash
> + write operation.
> + @param[in] EndPercentage The end completion percentage value that
> may
> + be used to report progress during the flash
> + write operation.
> +
> + @retval EFI_SUCCESS The operation returns successfully.
> + @retval EFI_WRITE_PROTECTED The flash device is read only.
> + @retval EFI_UNSUPPORTED The flash device access is unsupported.
> + @retval EFI_INVALID_PARAMETER The input parameter is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +PerformFlashWriteWithProgress (
> + IN PLATFORM_FIRMWARE_TYPE FirmwareType,
> + IN EFI_PHYSICAL_ADDRESS FlashAddress,
> + IN FLASH_ADDRESS_TYPE
> FlashAddressType,
> + IN VOID *Buffer,
> + IN UINTN Length,
> + IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress,
> OPTIONAL
> + IN UINTN StartPercentage,
> + IN UINTN EndPercentage
> + )
> +{
> + if (FlashAddressType == FlashAddressTypeRelativeAddress) {
> + FlashAddress = FlashAddress + mInternalFdAddress;
> + }
> + CopyMem((VOID *)(UINTN)(FlashAddress), Buffer, Length);
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Perform flash write operation.
>
> @param[in] FirmwareType The type of firmware.
> @param[in] FlashAddress The address of flash device to be accessed.
> @@ -43,9 +93,15 @@ PerformFlashWrite (
> IN UINTN Length
> )
> {
> - if (FlashAddressType == FlashAddressTypeRelativeAddress) {
> - FlashAddress = FlashAddress + mInternalFdAddress;
> - }
> - CopyMem((VOID *)(UINTN)(FlashAddress), Buffer, Length);
> - return EFI_SUCCESS;
> + return PerformFlashWriteWithProgress (
> + FirmwareType,
> + FlashAddress,
> + FlashAddressType,
> + Buffer,
> + Length,
> + NULL,
> + 0,
> + 0
> + );
> }
> +
> --
> 2.14.2.windows.3
next prev parent reply other threads:[~2018-05-28 19:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 6:15 [Patch v3 0/3] Add DisplayUpdateProgressLib for capsules Michael D Kinney
2018-05-25 6:15 ` [Patch v3 1/3] MdeModulePkg: Add DisplayUpdateProgressLib class Michael D Kinney
2018-05-25 11:06 ` Zeng, Star
2018-05-25 6:15 ` [Patch v3 2/3] MdeModulePkg: Add DisplayUpdateProgressLib instances Michael D Kinney
2018-05-25 11:10 ` Zeng, Star
2018-05-31 11:09 ` Ard Biesheuvel
2018-06-04 20:24 ` Kinney, Michael D
2018-05-25 6:15 ` [Patch v3 3/3] SignedCapsulePkg/PlatformFlashAccessLib: Add progress API Michael D Kinney
2018-05-28 19:18 ` Yao, Jiewen [this message]
2018-05-28 19:07 ` [Patch v3 0/3] Add DisplayUpdateProgressLib for capsules Yao, Jiewen
2018-05-29 9:51 ` Ard Biesheuvel
2018-05-29 9:51 ` Ard Biesheuvel
2018-05-29 12:43 ` Ard Biesheuvel
2018-05-29 13:05 ` Gao, Liming
2018-05-29 13:08 ` Ard Biesheuvel
2018-05-29 14:31 ` Kinney, Michael D
2018-05-31 11:12 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C503AC127D3@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox