From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Cohen, Eugene" <eugene@hp.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
"Zhang, Chao B" <chao.b.zhang@intel.com>
Cc: "Bin, Sung-Uk (???)" <sunguk-bin@hp.com>
Subject: Re: [PATCH 1/4] SecurityPkg: enable TPM components to build for ARM and AARCH64
Date: Wed, 14 Nov 2018 00:28:20 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C503F3EBF06@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <CS1PR8401MB11891D07065F71EB0C973FCBB4C20@CS1PR8401MB1189.NAMPRD84.PROD.OUTLOOK.COM>
Thanks Eugene
For 3, I do not think you need expose your IP.
There are 2 purposes I propose.
1) To prove this patch works for SPI.
We need a real example to use this TpmIoLib.
It is OK to keep it close source if it is IP.
I just want to make sure this approach is feasible.
2) To demonstrate how to do that.
If you can use EFI_SPI_PROTOCOL, that would be perfect.
Thank you
Yao Jiewen
> -----Original Message-----
> From: Cohen, Eugene [mailto:eugene@hp.com]
> Sent: Wednesday, November 14, 2018 6:49 AM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org; Zhang,
> Chao B <chao.b.zhang@intel.com>
> Cc: Bin, Sung-Uk (빈성욱) <sunguk-bin@hp.com>
> Subject: RE: [PATCH 1/4] SecurityPkg: enable TPM components to build for
> ARM and AARCH64
>
> Jiewen,
>
> 1 and 2 - okay, no problem, working on it.
>
> 3 - we are developing the SPI TPM support as we speak. Our SPI controller
> is proprietary so there's no value in trying to share that driver. Our internal
> SPI driver currently does not support the PI spec SPI_IO_PROTOCOL but are
> looking at adopting it - if so then we could contribute the TpmIoLibSpi
> instance which would connect the TPM stack to the SPI_IO_PROTOCOL. Is
> this what you wanted or is there something more specific you were looking
> for?
>
> Thanks,
>
> Eugene
>
> > -----Original Message-----
> > From: Yao, Jiewen <jiewen.yao@intel.com>
> > Sent: Tuesday, November 13, 2018 3:22 PM
> > To: Cohen, Eugene <eugene@hp.com>; edk2-devel@lists.01.org; Zhang,
> > Chao B <chao.b.zhang@intel.com>
> > Cc: Bin, Sung-Uk (빈성욱) <sunguk-bin@hp.com>
> > Subject: RE: [PATCH 1/4] SecurityPkg: enable TPM components to build for
> > ARM and AARCH64
> >
> > HI Eugene
> > Thanks to enable SPI TPM chip.
> > In general, I am OK on this patch series.
> >
> > There are some additional work here.
> > 1) Please split this patch to 2. The TpmIoLib is not present in at this point of
> > time. We should add it after TpmIoLib instance is added.
> >
> > 2) Since this patch series adds the dependency of TpmIoLib, please update
> > *all* impacted platform in EDKII repo and EDKII platform repo.
> > We need make sure this patch series does not break any existing platform
> > build.
> >
> > 3) I hope, (if possible) you can provide one *real example* on how to add
> > SPI instance, to demonstrate the usage and value of this one more layer
> > abstraction.
> >
> > Thank you
> > Yao Jiewen
> >
> >
> > > -----Original Message-----
> > > From: Cohen, Eugene [mailto:eugene@hp.com]
> > > Sent: Wednesday, November 14, 2018 6:13 AM
> > > To: edk2-devel@lists.01.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > > Zhang, Chao B <chao.b.zhang@intel.com>
> > > Cc: Bin, Sung-Uk (빈성욱) <sunguk-bin@hp.com>
> > > Subject: [PATCH 1/4] SecurityPkg: enable TPM components to build for
> > > ARM and AARCH64
> > >
> > > SecurityPkg: enable TPM components to build for ARM and AARCH64
> > >
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Cc: Chao Zhang <chao.b.zhang@intel.com>
> > > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > > Signed-off-by: Eugene Cohen <eugene@hp.com>
> > > ---
> > > SecurityPkg/SecurityPkg.dsc | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
> > > index 68a2953..6fb9ad2 100644
> > > --- a/SecurityPkg/SecurityPkg.dsc
> > > +++ b/SecurityPkg/SecurityPkg.dsc
> > > @@ -53,6 +53,7 @@
> > > IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
> > > OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
> > > IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > > + TpmIoLib|SecurityPkg/Library/TpmIoLibMmio/TpmIoLibMmio.inf
> > > TpmCommLib|SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
> > >
> > >
> > PlatformSecureLib|SecurityPkg/Library/PlatformSecureLibNull/PlatformSe
> > > PlatformSecureLib|cu
> > > reLibNull.inf
> > >
> > >
> > TcgPhysicalPresenceLib|SecurityPkg/Library/DxeTcgPhysicalPresenceLib/D
> > > TcgPhysicalPresenceLib|xe
> > > TcgPhysicalPresenceLib.inf
> > > @@ -199,7 +200,7 @@
> > > [Components.IA32, Components.X64, Components.ARM,
> > Components.AARCH64]
> > > SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
> > >
> > > -[Components.IA32, Components.X64]
> > > +[Components.IA32, Components.X64 Components.ARM,
> > > Components.AARCH64]
> > > #
> > >
> > SecurityPkg/UserIdentification/PwdCredentialProviderDxe/PwdCredential
> > P
> > > r
> > > oviderDxe.inf
> > > #
> > >
> > SecurityPkg/UserIdentification/UsbCredentialProviderDxe/UsbCredentialP
> > > ro
> > > viderDxe.inf
> > >
> > >
> > SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootCon
> > fi
> > > gDxe.inf
> > > --
> > > 2.7.4
next prev parent reply other threads:[~2018-11-14 0:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 22:12 [PATCH 1/4] SecurityPkg: enable TPM components to build for ARM and AARCH64 Cohen, Eugene
2018-11-13 22:21 ` Yao, Jiewen
2018-11-13 22:49 ` Cohen, Eugene
2018-11-14 0:28 ` Yao, Jiewen [this message]
2018-11-13 22:59 ` Kinney, Michael D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C503F3EBF06@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox