From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Zhang, Shenglei" <shenglei.zhang@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Wang, Jian J" <jian.j.wang@intel.com>,
"Zhang, Chao B" <chao.b.zhang@intel.com>
Subject: Re: [PATCH 1/1] SecurityPkg/TpmCommLib: Remove TpmCommLib
Date: Mon, 5 Aug 2019 06:17:20 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C503F741776@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20190805055514.17656-1-shenglei.zhang@intel.com>
Good. Reviewed-by: Jiewen.Yao@intel.com
> -----Original Message-----
> From: Zhang, Shenglei
> Sent: Monday, August 5, 2019 1:55 PM
> To: devel@edk2.groups.io
> Cc: Zhang, Shenglei <shenglei.zhang@intel.com>; Yao, Jiewen
> <jiewen.yao@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Zhang,
> Chao B <chao.b.zhang@intel.com>
> Subject: [PATCH 1/1] SecurityPkg/TpmCommLib: Remove TpmCommLib
>
> From: shenglei <shenglei.zhang@intel.com>
>
> TpmCommonLib is no longer used by TcgPei/TcgDxe/Tcg2ConfigPei
> modules. So TpmCommLib can be removed.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Jian Wang <jian.j.wang@intel.com>
> Cc: Chao Zhang <chao.b.zhang@intel.com>
> Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
> ---
> SecurityPkg/Library/TpmCommLib/TisPc.c | 177 -----------
> SecurityPkg/Library/TpmCommLib/TpmComm.c | 44 ---
> SecurityPkg/Include/Library/TpmCommLib.h | 281 ------------------
> SecurityPkg/Library/TpmCommLib/CommonHeader.h | 23 --
> SecurityPkg/Library/TpmCommLib/TpmCommLib.inf | 45 ---
> SecurityPkg/Library/TpmCommLib/TpmCommLib.uni | 17 --
> SecurityPkg/SecurityPkg.dec | 4 -
> SecurityPkg/SecurityPkg.dsc | 2 -
> 8 files changed, 593 deletions(-)
> delete mode 100644 SecurityPkg/Library/TpmCommLib/TisPc.c
> delete mode 100644 SecurityPkg/Library/TpmCommLib/TpmComm.c
> delete mode 100644 SecurityPkg/Include/Library/TpmCommLib.h
> delete mode 100644 SecurityPkg/Library/TpmCommLib/CommonHeader.h
> delete mode 100644 SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
> delete mode 100644 SecurityPkg/Library/TpmCommLib/TpmCommLib.uni
>
> diff --git a/SecurityPkg/Library/TpmCommLib/TisPc.c
> b/SecurityPkg/Library/TpmCommLib/TisPc.c
> deleted file mode 100644
> index 162e883d2170..000000000000
> --- a/SecurityPkg/Library/TpmCommLib/TisPc.c
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -/** @file
> - Basic TIS (TPM Interface Specification) functions.
> -
> -Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
> -SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include "CommonHeader.h"
> -
> -/**
> - Check whether TPM chip exist.
> -
> - @param[in] TisReg Pointer to TIS register.
> -
> - @retval TRUE TPM chip exists.
> - @retval FALSE TPM chip is not found.
> -**/
> -BOOLEAN
> -TisPcPresenceCheck (
> - IN TIS_PC_REGISTERS_PTR TisReg
> - )
> -{
> - UINT8 RegRead;
> -
> - RegRead = MmioRead8 ((UINTN)&TisReg->Access);
> - return (BOOLEAN)(RegRead != (UINT8)-1);
> -}
> -
> -/**
> - Check whether the value of a TPM chip register satisfies the input BIT
> setting.
> -
> - @param[in] Register Address port of register to be checked.
> - @param[in] BitSet Check these data bits are set.
> - @param[in] BitClear Check these data bits are clear.
> - @param[in] TimeOut The max wait time (unit MicroSecond)
> when checking register.
> -
> - @retval EFI_SUCCESS The register satisfies the check bit.
> - @retval EFI_TIMEOUT The register can't run into the expected
> status in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcWaitRegisterBits (
> - IN UINT8 *Register,
> - IN UINT8 BitSet,
> - IN UINT8 BitClear,
> - IN UINT32 TimeOut
> - )
> -{
> - UINT8 RegRead;
> - UINT32 WaitTime;
> -
> - for (WaitTime = 0; WaitTime < TimeOut; WaitTime += 30){
> - RegRead = MmioRead8 ((UINTN)Register);
> - if ((RegRead & BitSet) == BitSet && (RegRead & BitClear) == 0)
> - return EFI_SUCCESS;
> - MicroSecondDelay (30);
> - }
> - return EFI_TIMEOUT;
> -}
> -
> -/**
> - Get BurstCount by reading the burstCount field of a TIS regiger
> - in the time of default TIS_TIMEOUT_D.
> -
> - @param[in] TisReg Pointer to TIS register.
> - @param[out] BurstCount Pointer to a buffer to store the
> got BurstConut.
> -
> - @retval EFI_SUCCESS Get BurstCount.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL or BurstCount is
> NULL.
> - @retval EFI_TIMEOUT BurstCount can't be got in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcReadBurstCount (
> - IN TIS_PC_REGISTERS_PTR TisReg,
> - OUT UINT16 *BurstCount
> - )
> -{
> - UINT32 WaitTime;
> - UINT8 DataByte0;
> - UINT8 DataByte1;
> -
> - if (BurstCount == NULL || TisReg == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - WaitTime = 0;
> - do {
> - //
> - // TIS_PC_REGISTERS_PTR->burstCount is UINT16, but it is not 2bytes
> aligned,
> - // so it needs to use MmioRead8 to read two times
> - //
> - DataByte0 = MmioRead8 ((UINTN)&TisReg->BurstCount);
> - DataByte1 = MmioRead8 ((UINTN)&TisReg->BurstCount + 1);
> - *BurstCount = (UINT16)((DataByte1 << 8) + DataByte0);
> - if (*BurstCount != 0) {
> - return EFI_SUCCESS;
> - }
> - MicroSecondDelay (30);
> - WaitTime += 30;
> - } while (WaitTime < TIS_TIMEOUT_D);
> -
> - return EFI_TIMEOUT;
> -}
> -
> -/**
> - Set TPM chip to ready state by sending ready command
> TIS_PC_STS_READY
> - to Status Register in time.
> -
> - @param[in] TisReg Pointer to TIS register.
> -
> - @retval EFI_SUCCESS TPM chip enters into ready state.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL.
> - @retval EFI_TIMEOUT TPM chip can't be set to ready
> state in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcPrepareCommand (
> - IN TIS_PC_REGISTERS_PTR TisReg
> - )
> -{
> - EFI_STATUS Status;
> -
> - if (TisReg == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - MmioWrite8((UINTN)&TisReg->Status, TIS_PC_STS_READY);
> - Status = TisPcWaitRegisterBits (
> - &TisReg->Status,
> - TIS_PC_STS_READY,
> - 0,
> - TIS_TIMEOUT_B
> - );
> - return Status;
> -}
> -
> -/**
> - Get the control of TPM chip by sending requestUse command
> TIS_PC_ACC_RQUUSE
> - to ACCESS Register in the time of default TIS_TIMEOUT_A.
> -
> - @param[in] TisReg Pointer to TIS register.
> -
> - @retval EFI_SUCCESS Get the control of TPM chip.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL.
> - @retval EFI_NOT_FOUND TPM chip doesn't exit.
> - @retval EFI_TIMEOUT Can't get the TPM control in
> time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcRequestUseTpm (
> - IN TIS_PC_REGISTERS_PTR TisReg
> - )
> -{
> - EFI_STATUS Status;
> -
> - if (TisReg == NULL) {
> - return EFI_INVALID_PARAMETER;
> - }
> -
> - if (!TisPcPresenceCheck (TisReg)) {
> - return EFI_NOT_FOUND;
> - }
> -
> - MmioWrite8((UINTN)&TisReg->Access, TIS_PC_ACC_RQUUSE);
> - //
> - // No locality set before, ACCESS_X.activeLocality MUST be valid within
> TIMEOUT_A
> - //
> - Status = TisPcWaitRegisterBits (
> - &TisReg->Access,
> - (UINT8)(TIS_PC_ACC_ACTIVE |TIS_PC_VALID),
> - 0,
> - TIS_TIMEOUT_A
> - );
> - return Status;
> -}
> diff --git a/SecurityPkg/Library/TpmCommLib/TpmComm.c
> b/SecurityPkg/Library/TpmCommLib/TpmComm.c
> deleted file mode 100644
> index dee64b24ffef..000000000000
> --- a/SecurityPkg/Library/TpmCommLib/TpmComm.c
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -/** @file
> - Basic TPM command functions.
> -
> -Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
> -SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#include "CommonHeader.h"
> -
> -/**
> - Single function calculates SHA1 digest value for all raw data. It
> - combines Sha1Init(), Sha1Update() and Sha1Final().
> -
> - @param[in] Data Raw data to be digested.
> - @param[in] DataLen Size of the raw data.
> - @param[out] Digest Pointer to a buffer that stores the final
> digest.
> -
> - @retval EFI_SUCCESS Always successfully calculate the final
> digest.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TpmCommHashAll (
> - IN CONST UINT8 *Data,
> - IN UINTN DataLen,
> - OUT TPM_DIGEST *Digest
> - )
> -{
> - VOID *Sha1Ctx;
> - UINTN CtxSize;
> -
> - CtxSize = Sha1GetContextSize ();
> - Sha1Ctx = AllocatePool (CtxSize);
> - ASSERT (Sha1Ctx != NULL);
> -
> - Sha1Init (Sha1Ctx);
> - Sha1Update (Sha1Ctx, Data, DataLen);
> - Sha1Final (Sha1Ctx, (UINT8 *)Digest);
> -
> - FreePool (Sha1Ctx);
> -
> - return EFI_SUCCESS;
> -}
> -
> diff --git a/SecurityPkg/Include/Library/TpmCommLib.h
> b/SecurityPkg/Include/Library/TpmCommLib.h
> deleted file mode 100644
> index b9aca60b82a0..000000000000
> --- a/SecurityPkg/Include/Library/TpmCommLib.h
> +++ /dev/null
> @@ -1,281 +0,0 @@
> -/** @file
> - This library is only intended to be used by TPM modules.
> - It provides basic TPM Interface Specification (TIS) and Command
> functions.
> -
> -Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>
> -SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#ifndef _TPM_COMM_LIB_H_
> -#define _TPM_COMM_LIB_H_
> -
> -#include <IndustryStandard/Tpm12.h>
> -
> -typedef EFI_HANDLE TIS_TPM_HANDLE;
> -
> -///
> -/// TPM register base address.
> -///
> -#define TPM_BASE_ADDRESS 0xfed40000
> -
> -//
> -// Set structure alignment to 1-byte
> -//
> -#pragma pack (1)
> -
> -//
> -// Register set map as specified in TIS specification Chapter 10
> -//
> -typedef struct {
> - ///
> - /// Used to gain ownership for this particular port.
> - ///
> - UINT8 Access; // 0
> - UINT8 Reserved1[7]; // 1
> - ///
> - /// Controls interrupts.
> - ///
> - UINT32 IntEnable; // 8
> - ///
> - /// SIRQ vector to be used by the TPM.
> - ///
> - UINT8 IntVector; // 0ch
> - UINT8 Reserved2[3]; // 0dh
> - ///
> - /// What caused interrupt.
> - ///
> - UINT32 IntSts; // 10h
> - ///
> - /// Shows which interrupts are supported by that particular TPM.
> - ///
> - UINT32 IntfCapability; // 14h
> - ///
> - /// Status Register. Provides status of the TPM.
> - ///
> - UINT8 Status; // 18h
> - ///
> - /// Number of consecutive writes that can be done to the TPM.
> - ///
> - UINT16 BurstCount; // 19h
> - UINT8 Reserved3[9];
> - ///
> - /// Read or write FIFO, depending on transaction.
> - ///
> - UINT32 DataFifo; // 24
> - UINT8 Reserved4[0xed8]; // 28h
> - ///
> - /// Vendor ID
> - ///
> - UINT16 Vid; //
> 0f00h
> - ///
> - /// Device ID
> - ///
> - UINT16 Did; //
> 0f02h
> - ///
> - /// Revision ID
> - ///
> - UINT8 Rid; //
> 0f04h
> - ///
> - /// TCG defined configuration registers.
> - ///
> - UINT8 TcgDefined[0x7b]; // 0f05h
> - ///
> - /// Alias to I/O legacy space.
> - ///
> - UINT32 LegacyAddress1; // 0f80h
> - ///
> - /// Additional 8 bits for I/O legacy space extension.
> - ///
> - UINT32 LegacyAddress1Ex; // 0f84h
> - ///
> - /// Alias to second I/O legacy space.
> - ///
> - UINT32 LegacyAddress2; // 0f88h
> - ///
> - /// Additional 8 bits for second I/O legacy space extension.
> - ///
> - UINT32 LegacyAddress2Ex; // 0f8ch
> - ///
> - /// Vendor-defined configuration registers.
> - ///
> - UINT8 VendorDefined[0x70];// 0f90h
> -} TIS_PC_REGISTERS;
> -
> -//
> -// Restore original structure alignment
> -//
> -#pragma pack ()
> -
> -//
> -// Define pointer types used to access TIS registers on PC
> -//
> -typedef TIS_PC_REGISTERS *TIS_PC_REGISTERS_PTR;
> -
> -//
> -// TCG Platform Type based on TCG ACPI Specification Version 1.00
> -//
> -#define TCG_PLATFORM_TYPE_CLIENT 0
> -#define TCG_PLATFORM_TYPE_SERVER 1
> -
> -//
> -// Define bits of ACCESS and STATUS registers
> -//
> -
> -///
> -/// This bit is a 1 to indicate that the other bits in this register are valid.
> -///
> -#define TIS_PC_VALID BIT7
> -///
> -/// Indicate that this locality is active.
> -///
> -#define TIS_PC_ACC_ACTIVE BIT5
> -///
> -/// Set to 1 to indicate that this locality had the TPM taken away while
> -/// this locality had the TIS_PC_ACC_ACTIVE bit set.
> -///
> -#define TIS_PC_ACC_SEIZED BIT4
> -///
> -/// Set to 1 to indicate that TPM MUST reset the
> -/// TIS_PC_ACC_ACTIVE bit and remove ownership for localities less than
> the
> -/// locality that is writing this bit.
> -///
> -#define TIS_PC_ACC_SEIZE BIT3
> -///
> -/// When this bit is 1, another locality is requesting usage of the TPM.
> -///
> -#define TIS_PC_ACC_PENDIND BIT2
> -///
> -/// Set to 1 to indicate that this locality is requesting to use TPM.
> -///
> -#define TIS_PC_ACC_RQUUSE BIT1
> -///
> -/// A value of 1 indicates that a T/OS has not been established on the
> platform
> -///
> -#define TIS_PC_ACC_ESTABLISH BIT0
> -
> -///
> -/// When this bit is 1, TPM is in the Ready state,
> -/// indicating it is ready to receive a new command.
> -///
> -#define TIS_PC_STS_READY BIT6
> -///
> -/// Write a 1 to this bit to cause the TPM to execute that command.
> -///
> -#define TIS_PC_STS_GO BIT5
> -///
> -/// This bit indicates that the TPM has data available as a response.
> -///
> -#define TIS_PC_STS_DATA BIT4
> -///
> -/// The TPM sets this bit to a value of 1 when it expects another byte of
> data for a command.
> -///
> -#define TIS_PC_STS_EXPECT BIT3
> -///
> -/// Writes a 1 to this bit to force the TPM to re-send the response.
> -///
> -#define TIS_PC_STS_RETRY BIT1
> -
> -//
> -// Default TimeOut value
> -//
> -#define TIS_TIMEOUT_A 750 * 1000 // 750ms
> -#define TIS_TIMEOUT_B 2000 * 1000 // 2s
> -#define TIS_TIMEOUT_C 750 * 1000 // 750ms
> -#define TIS_TIMEOUT_D 750 * 1000 // 750ms
> -
> -//
> -// Max TPM command/reponse length
> -//
> -#define TPMCMDBUFLENGTH 1024
> -
> -/**
> - Check whether the value of a TPM chip register satisfies the input BIT
> setting.
> -
> - @param[in] Register Address port of register to be checked.
> - @param[in] BitSet Check these data bits are set.
> - @param[in] BitClear Check these data bits are clear.
> - @param[in] TimeOut The max wait time (unit MicroSecond)
> when checking register.
> -
> - @retval EFI_SUCCESS The register satisfies the check bit.
> - @retval EFI_TIMEOUT The register can't run into the expected
> status in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcWaitRegisterBits (
> - IN UINT8 *Register,
> - IN UINT8 BitSet,
> - IN UINT8 BitClear,
> - IN UINT32 TimeOut
> - );
> -
> -/**
> - Get BurstCount by reading the burstCount field of a TIS regiger
> - in the time of default TIS_TIMEOUT_D.
> -
> - @param[in] TisReg Pointer to TIS register.
> - @param[out] BurstCount Pointer to a buffer to store the
> got BurstConut.
> -
> - @retval EFI_SUCCESS Get BurstCount.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL or BurstCount is
> NULL.
> - @retval EFI_TIMEOUT BurstCount can't be got in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcReadBurstCount (
> - IN TIS_PC_REGISTERS_PTR TisReg,
> - OUT UINT16 *BurstCount
> - );
> -
> -/**
> - Set TPM chip to ready state by sending ready command
> TIS_PC_STS_READY
> - to Status Register in time.
> -
> - @param[in] TisReg Pointer to TIS register.
> -
> - @retval EFI_SUCCESS TPM chip enters into ready state.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL.
> - @retval EFI_TIMEOUT TPM chip can't be set to ready
> state in time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcPrepareCommand (
> - IN TIS_PC_REGISTERS_PTR TisReg
> - );
> -
> -/**
> - Get the control of TPM chip by sending requestUse command
> TIS_PC_ACC_RQUUSE
> - to ACCESS Register in the time of default TIS_TIMEOUT_D.
> -
> - @param[in] TisReg Pointer to TIS register.
> -
> - @retval EFI_SUCCESS Get the control of TPM chip.
> - @retval EFI_INVALID_PARAMETER TisReg is NULL.
> - @retval EFI_NOT_FOUND TPM chip doesn't exit.
> - @retval EFI_TIMEOUT Can't get the TPM control in
> time.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TisPcRequestUseTpm (
> - IN TIS_PC_REGISTERS_PTR TisReg
> - );
> -
> -/**
> - Single function calculates SHA1 digest value for all raw data. It
> - combines Sha1Init(), Sha1Update() and Sha1Final().
> -
> - @param[in] Data Raw data to be digested.
> - @param[in] DataLen Size of the raw data.
> - @param[out] Digest Pointer to a buffer that stores the final
> digest.
> -
> - @retval EFI_SUCCESS Always successfully calculate the final
> digest.
> -**/
> -EFI_STATUS
> -EFIAPI
> -TpmCommHashAll (
> - IN CONST UINT8 *Data,
> - IN UINTN DataLen,
> - OUT TPM_DIGEST *Digest
> - );
> -
> -#endif
> diff --git a/SecurityPkg/Library/TpmCommLib/CommonHeader.h
> b/SecurityPkg/Library/TpmCommLib/CommonHeader.h
> deleted file mode 100644
> index 386c9fab44d9..000000000000
> --- a/SecurityPkg/Library/TpmCommLib/CommonHeader.h
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -/** @file
> - The intenal header file for TpmCommLib.
> -
> -Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> -SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#ifndef _TPMCOMMLIB_COMMON_HEADER_H_
> -#define _TPMCOMMLIB_COMMON_HEADER_H_
> -
> -#include <PiPei.h>
> -#include <IndustryStandard/Tpm12.h>
> -#include <Library/BaseLib.h>
> -#include <Library/BaseMemoryLib.h>
> -#include <Library/IoLib.h>
> -#include <Library/TimerLib.h>
> -#include <Library/TpmCommLib.h>
> -#include <Library/BaseCryptLib.h>
> -#include <Library/MemoryAllocationLib.h>
> -#include <Library/DebugLib.h>
> -
> -#endif
> diff --git a/SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
> b/SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
> deleted file mode 100644
> index 4caabd496f59..000000000000
> --- a/SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -## @file
> -# Provides some common functions for the TCG feature
> -#
> -# This instance provides basic TPM Interface Specification (TIS) functions
> -# and TPM hashall function.
> -#
> -# Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
> -# SPDX-License-Identifier: BSD-2-Clause-Patent
> -#
> -##
> -
> -[Defines]
> - INF_VERSION = 0x00010005
> - BASE_NAME = TpmCommLib
> - MODULE_UNI_FILE = TpmCommLib.uni
> - FILE_GUID =
> 7d9fe32e-a6a9-4cdf-abff-10cc7f22e1c9
> - MODULE_TYPE = PEIM
> - VERSION_STRING = 1.0
> - LIBRARY_CLASS = TpmCommLib|DXE_DRIVER
> UEFI_DRIVER PEIM DXE_SMM_DRIVER
> -
> -#
> -# The following information is for reference only and not required by the
> build tools.
> -#
> -# VALID_ARCHITECTURES = IA32 X64
> -#
> -
> -[Sources]
> - TisPc.c
> - TpmComm.c
> - CommonHeader.h
> -
> -[Packages]
> - MdePkg/MdePkg.dec
> - SecurityPkg/SecurityPkg.dec
> - CryptoPkg/CryptoPkg.dec
> -
> -[LibraryClasses]
> - BaseLib
> - BaseMemoryLib
> - IoLib
> - TimerLib
> - BaseCryptLib
> - MemoryAllocationLib
> - DebugLib
> -
> diff --git a/SecurityPkg/Library/TpmCommLib/TpmCommLib.uni
> b/SecurityPkg/Library/TpmCommLib/TpmCommLib.uni
> deleted file mode 100644
> index 96194551be88..000000000000
> --- a/SecurityPkg/Library/TpmCommLib/TpmCommLib.uni
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -// /** @file
> -// Provides some common functions for the TCG feature
> -//
> -// This instance provides basic TPM Interface Specification (TIS) functions
> -// and TPM hashall function.
> -//
> -// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
> -//
> -// SPDX-License-Identifier: BSD-2-Clause-Patent
> -//
> -// **/
> -
> -
> -#string STR_MODULE_ABSTRACT #language en-US
> "Provides some common functions for the TCG feature"
> -
> -#string STR_MODULE_DESCRIPTION #language en-US "This
> instance provides basic TPM Interface Specification (TIS) functions and TPM
> hashall function."
> -
> diff --git a/SecurityPkg/SecurityPkg.dec b/SecurityPkg/SecurityPkg.dec
> index ce2a9d33a4f2..3511cfb2cb85 100644
> --- a/SecurityPkg/SecurityPkg.dec
> +++ b/SecurityPkg/SecurityPkg.dec
> @@ -55,10 +55,6 @@ [LibraryClasses]
> #
> Tpm12DeviceLib|Include/Library/Tpm12DeviceLib.h
>
> - ## @libraryclass Provides TPM Interface Specification (TIS) interfaces
> for TPM command.
> - #
> - TpmCommLib|Include/Library/TpmCommLib.h
> -
> ## @libraryclass Provides support for TCG Physical Presence
> Interface (PPI) specification
> # >= 128 Vendor Specific PPI Operation.
> #
> diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
> index aef2ac3a208d..e2ac1e4a9e1c 100644
> --- a/SecurityPkg/SecurityPkg.dsc
> +++ b/SecurityPkg/SecurityPkg.dsc
> @@ -47,7 +47,6 @@ [LibraryClasses]
> IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
> OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
> IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> - TpmCommLib|SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
>
> PlatformSecureLib|SecurityPkg/Library/PlatformSecureLibNull/PlatformSecu
> reLibNull.inf
>
> TcgPhysicalPresenceLib|SecurityPkg/Library/DxeTcgPhysicalPresenceLib/Dxe
> TcgPhysicalPresenceLib.inf
>
> TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpm
> MeasurementLib.inf
> @@ -155,7 +154,6 @@ [Components]
> # TPM
> #
>
> SecurityPkg/Library/DxeTpmMeasureBootLib/DxeTpmMeasureBootLib.inf
> - SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
>
> SecurityPkg/Library/DxeTcgPhysicalPresenceLib/DxeTcgPhysicalPresenceLib.
> inf
> SecurityPkg/Library/Tpm12CommandLib/Tpm12CommandLib.inf
> SecurityPkg/Library/Tpm12DeviceLibDTpm/Tpm12DeviceLibDTpm.inf
> --
> 2.18.0.windows.1
next prev parent reply other threads:[~2019-08-05 6:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-05 5:55 [PATCH 1/1] SecurityPkg/TpmCommLib: Remove TpmCommLib Zhang, Shenglei
2019-08-05 6:17 ` Yao, Jiewen [this message]
2019-08-05 9:01 ` [edk2-devel] " Wang, Jian J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C503F741776@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox