From: "Yao, Jiewen" <jiewen.yao@intel.com>
To: "Ni, Ray" <ray.ni@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Chaganty, Rangasai V" <rangasai.v.chaganty@intel.com>,
"Lou, Yun" <yun.lou@intel.com>
Subject: Re: [PATCH V3 4/6] IntelSiliconPkg/IntelPciDeviceSecurityDxe: Add PciSecurity.
Date: Mon, 11 Nov 2019 10:16:49 +0000 [thread overview]
Message-ID: <74D8A39837DF1E4DA445A8C0B3885C503F84D1AB@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <734D49CCEBEEF84792F5B80ED585239D5C357B6B@SHSMSX104.ccr.corp.intel.com>
Agree. I will remove them.
> -----Original Message-----
> From: Ni, Ray <ray.ni@intel.com>
> Sent: Monday, November 11, 2019 4:20 PM
> To: Yao, Jiewen <jiewen.yao@intel.com>; devel@edk2.groups.io
> Cc: Chaganty, Rangasai V <rangasai.v.chaganty@intel.com>; Lou, Yun
> <yun.lou@intel.com>
> Subject: RE: [PATCH V3 4/6] IntelSiliconPkg/IntelPciDeviceSecurityDxe: Add
> PciSecurity.
>
> Jiewen,
> Below definitions are not used by the new driver but defined in
> driver internal header file.
> Can you please remove the unused definitions?
>
> EDKII_DEVICE_SECURITY_EVENT_DATA_USB_CONTEXT
> #define EDKII_DEVICE_ROOT_CERT_VARAIBLE_NAME L"devdb"
> #define EDKII_DEVICE_ROOT_CERT_VARAIBLE2_NAME L"devdbx"
>
> #define EDKII_DEVICE_SIGNATURE_DATABASE_GUID \
> {0xb9c2b4f4, 0xbf5f, 0x462d, 0x8a, 0xdf, 0xc5, 0xc7, 0xa, 0xc3, 0x5d, 0xad}
>
> > -----Original Message-----
> > From: Yao, Jiewen <jiewen.yao@intel.com>
> > Sent: Thursday, November 7, 2019 9:38 PM
> > To: devel@edk2.groups.io
> > Cc: Ni, Ray <ray.ni@intel.com>; Chaganty, Rangasai V
> > <rangasai.v.chaganty@intel.com>; Lou, Yun <yun.lou@intel.com>
> > Subject: [PATCH V3 4/6] IntelSiliconPkg/IntelPciDeviceSecurityDxe: Add
> > PciSecurity.
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
> >
> > This driver is to do the PCI device authentication based upon Intel PCIe
> > Security Specification.
> >
> > Cc: Ray Ni <ray.ni@intel.com>
> > Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
> > Cc: Yun Lou <yun.lou@intel.com>
> > Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
> > Signed-off-by: Yun Lou <yun.lou@intel.com>
> > ---
> > .../IntelPciDeviceSecurityDxe.c | 697 ++++++++++++++++++
> > .../IntelPciDeviceSecurityDxe.inf | 45 ++
> > .../TcgDeviceEvent.h | 178 +++++
> > 3 files changed, 920 insertions(+)
> > create mode 100644
> > Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDxe
> > /IntelPciDeviceSecurityDxe.c
> > create mode 100644
> > Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDxe
> > /IntelPciDeviceSecurityDxe.inf
> > create mode 100644
> > Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDxe
> > /TcgDeviceEvent.h
> >
> > diff --git
> > a/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDx
> > e/IntelPciDeviceSecurityDxe.c
> > b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityD
> > xe/IntelPciDeviceSecurityDxe.c
> > new file mode 100644
> > index 0000000000..8838d5635a
> > --- /dev/null
> > +++ b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceS
> > +++ ecurityDxe/IntelPciDeviceSecurityDxe.c
> > @@ -0,0 +1,697 @@
> > +/** @file
> > + EDKII Device Security library for PCI device.
> > + It follows the Intel PCIe Security Specification.
> > +
> > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > +SPDX-License-Identifier: BSD-2-Clause-Patent
> > +
> > +**/
> > +
> > +#include <Uefi.h>
> > +#include <IndustryStandard/Spdm.h>
> > +#include <IndustryStandard/IntelPciSecurity.h>
> > +#include <IndustryStandard/Pci.h>
> > +#include <IndustryStandard/Tpm20.h>
> > +#include <IndustryStandard/UefiTcgPlatform.h>
> > +#include <Library/BaseLib.h>
> > +#include <Library/DebugLib.h>
> > +#include <Library/BaseMemoryLib.h>
> > +#include <Library/UefiBootServicesTableLib.h>
> > +#include <Library/MemoryAllocationLib.h> #include
> > +<Library/TpmMeasurementLib.h> #include <Protocol/PciIo.h> #include
> > +<Protocol/DeviceSecurity.h> #include
> > +<Protocol/PlatformDeviceSecurityPolicy.h>
> > +#include "TcgDeviceEvent.h"
> > +
> > +typedef struct {
> > + EDKII_DEVICE_SECURITY_EVENT_DATA_HEADER EventData;
> > + SPDM_MEASUREMENT_BLOCK_COMMON_HEADER CommonHeader;
> > + SPDM_MEASUREMENT_BLOCK_DMTF_HEADER DmtfHeader;
> > + UINT8 Digest[SHA256_DIGEST_SIZE];
> > + EDKII_DEVICE_SECURITY_EVENT_DATA_PCI_CONTEXT PciContext; }
> > +EDKII_DEVICE_SECURITY_PCI_EVENT_DATA;
> > +
> > +typedef struct {
> > + UINTN Signature;
> > + LIST_ENTRY Link;
> > + UINTN PciSegment;
> > + UINTN PciBus;
> > + UINTN PciDevice;
> > + UINTN PciFunction;
> > +} PCI_DEVICE_INSTANCE;
> > +
> > +#define PCI_DEVICE_INSTANCE_SIGNATURE SIGNATURE_32 ('P', 'D', 'I',
> > +'S') #define PCI_DEVICE_INSTANCE_FROM_LINK(a) CR (a,
> > +PCI_DEVICE_INSTANCE, Link, PCI_DEVICE_INSTANCE_SIGNATURE)
> > +
> > +LIST_ENTRY mSecurityEventMeasurementDeviceList =
> > +INITIALIZE_LIST_HEAD_VARIABLE(mSecurityEventMeasurementDeviceList)
> > ;;
> > +EDKII_DEVICE_SECURITY_POLICY_PROTOCOL *mDeviceSecurityPolicy;
> > +
> > +/**
> > + Record a PCI device into device list.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param PciDeviceList The list to record the the device
> > +**/
> > +VOID
> > +RecordPciDeviceInList(
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN LIST_ENTRY *PciDeviceList
> > + )
> > +{
> > + UINTN PciSegment;
> > + UINTN PciBus;
> > + UINTN PciDevice;
> > + UINTN PciFunction;
> > + EFI_STATUS Status;
> > + PCI_DEVICE_INSTANCE *NewPciDevice;
> > +
> > + Status = PciIo->GetLocation (PciIo, &PciSegment, &PciBus, &PciDevice,
> > + &PciFunction); ASSERT_EFI_ERROR(Status);
> > +
> > + NewPciDevice = AllocateZeroPool(sizeof(*NewPciDevice));
> > + ASSERT_EFI_ERROR(NewPciDevice != NULL);
> > +
> > + NewPciDevice->Signature = PCI_DEVICE_INSTANCE_SIGNATURE;
> > + NewPciDevice->PciSegment = PciSegment;
> > + NewPciDevice->PciBus = PciBus;
> > + NewPciDevice->PciDevice = PciDevice;
> > + NewPciDevice->PciFunction = PciFunction;
> > +
> > + InsertTailList(PciDeviceList, &NewPciDevice->Link); }
> > +
> > +/**
> > + Check if a PCI device is recorded in device list.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param PciDeviceList The list to record the the device
> > +
> > + @retval TRUE The PCI device is in the list.
> > + @retval FALSE The PCI device is NOT in the list.
> > +**/
> > +BOOLEAN
> > +IsPciDeviceInList(
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN LIST_ENTRY *PciDeviceList
> > + )
> > +{
> > + UINTN PciSegment;
> > + UINTN PciBus;
> > + UINTN PciDevice;
> > + UINTN PciFunction;
> > + EFI_STATUS Status;
> > + LIST_ENTRY *Link;
> > + PCI_DEVICE_INSTANCE *CurrentPciDevice;
> > +
> > + Status = PciIo->GetLocation (PciIo, &PciSegment, &PciBus, &PciDevice,
> > + &PciFunction); ASSERT_EFI_ERROR(Status);
> > +
> > + Link = GetFirstNode(PciDeviceList);
> > + while (!IsNull(PciDeviceList, Link)) {
> > + CurrentPciDevice = PCI_DEVICE_INSTANCE_FROM_LINK(Link);
> > +
> > + if (CurrentPciDevice->PciSegment == PciSegment && CurrentPciDevice-
> > >PciBus == PciBus &&
> > + CurrentPciDevice->PciDevice == PciDevice && CurrentPciDevice-
> > >PciFunction == PciFunction) {
> > + DEBUG((DEBUG_INFO, "PCI device duplicated (Loc -
> > %04x:%02x:%02x:%02x)\n", PciSegment, PciBus, PciDevice, PciFunction));
> > + return TRUE;
> > + }
> > +
> > + Link = GetNextNode(PciDeviceList, Link); }
> > +
> > + return FALSE;
> > +}
> > +
> > +/*
> > + return Offset of the PCI Cap ID.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param CapId The Capability ID of the Pci device
> > +
> > + @return The PCI Capability ID Offset
> > +*/
> > +UINT32
> > +GetPciCapId (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN UINT8 CapId
> > + )
> > +{
> > + EFI_PCI_CAPABILITY_HDR PciCapIdHdr;
> > + UINT32 PciCapIdOffset;
> > + EFI_STATUS Status;
> > +
> > + PciCapIdHdr.CapabilityID = ~CapId;
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8,
> > + PCI_CAPBILITY_POINTER_OFFSET, 1, &PciCapIdHdr.NextItemPtr);
> > + ASSERT_EFI_ERROR(Status); if (PciCapIdHdr.NextItemPtr == 0 ||
> > PciCapIdHdr.NextItemPtr == 0xFF) {
> > + return 0;
> > + }
> > + PciCapIdOffset = 0;
> > + do {
> > + if (PciCapIdHdr.CapabilityID == CapId) {
> > + break;
> > + }
> > + PciCapIdOffset = PciCapIdHdr.NextItemPtr;
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16, PciCapIdOffset, 1,
> > &PciCapIdHdr);
> > + ASSERT_EFI_ERROR(Status);
> > + } while (PciCapIdHdr.NextItemPtr != 0 && PciCapIdHdr.NextItemPtr !=
> > + 0xFF);
> > +
> > + if (PciCapIdHdr.CapabilityID == CapId) {
> > + return PciCapIdOffset;
> > + } else {
> > + return 0;
> > + }
> > +}
> > +
> > +/*
> > + return Offset of the PCIe Ext Cap ID.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param CapId The Ext Capability ID of the Pci device
> > +
> > + @return The PCIe Ext Capability ID Offset */
> > +UINT32
> > +GetPciExpressExtCapId (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN UINT16 CapId
> > + )
> > +{
> > + UINT32 PcieCapIdOffset;
> > + PCI_EXPRESS_EXTENDED_CAPABILITIES_HEADER PciExpressExtCapIdHdr;
> > + EFI_STATUS Status;
> > +
> > + PcieCapIdOffset = GetPciCapId (PciIo, EFI_PCI_CAPABILITY_ID_PCIEXP);
> > + if (PcieCapIdOffset == 0) {
> > + return 0;
> > + }
> > +
> > + PciExpressExtCapIdHdr.CapabilityId = ~CapId;
> > + PciExpressExtCapIdHdr.CapabilityVersion = 0xF;
> > + PciExpressExtCapIdHdr.NextCapabilityOffset = 0x100; PcieCapIdOffset =
> > + 0; do {
> > + if (PciExpressExtCapIdHdr.CapabilityId == CapId) {
> > + break;
> > + }
> > + PcieCapIdOffset = PciExpressExtCapIdHdr.NextCapabilityOffset;
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, PcieCapIdOffset, 1,
> > &PciExpressExtCapIdHdr);
> > + ASSERT_EFI_ERROR(Status);
> > + } while (PciExpressExtCapIdHdr.NextCapabilityOffset != 0 &&
> > + PciExpressExtCapIdHdr.NextCapabilityOffset != 0xFFF);
> > +
> > + if (PciExpressExtCapIdHdr.CapabilityId == CapId) {
> > + return PcieCapIdOffset;
> > + } else {
> > + return 0;
> > + }
> > +}
> > +
> > +/**
> > + Read byte of the PCI device configuration space.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param Offset The offset of the Pci device configuration space
> > +
> > + @return Byte value of the PCI device configuration space.
> > +**/
> > +UINT8
> > +DvSecPciRead8 (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN UINT32 Offset
> > + )
> > +{
> > + EFI_STATUS Status;
> > + UINT8 Data;
> > +
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, Offset, 1,
> > + &Data); ASSERT_EFI_ERROR(Status);
> > +
> > + return Data;
> > +}
> > +
> > +/**
> > + Write byte of the PCI device configuration space.
> > +
> > + @param PciIo PciIo instance of the device
> > + @param Offset The offset of the Pci device configuration space
> > + @param Data Byte value of the PCI device configuration space.
> > +**/
> > +VOID
> > +DvSecPciWrite8 (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN UINT32 Offset,
> > + IN UINT8 Data
> > + )
> > +{
> > + EFI_STATUS Status;
> > +
> > + Status = PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, Offset, 1,
> > +&Data);
> > + ASSERT_EFI_ERROR(Status);
> > +}
> > +
> > +/**
> > + Get the Digest size from the TCG hash Algorithm ID.
> > +
> > + @param TcgAlgId TCG hash Algorithm ID
> > +
> > + @return Digest size of the TCG hash Algorithm ID **/ UINTN
> > +DigestSizeFromTcgAlgId (
> > + IN UINT16 TcgAlgId
> > + )
> > +{
> > + switch (TcgAlgId) {
> > + case TPM_ALG_SHA256:
> > + return SHA256_DIGEST_SIZE;
> > + case TPM_ALG_SHA384:
> > + case TPM_ALG_SHA512:
> > + case TPM_ALG_SM3_256:
> > + default:
> > + break;
> > + }
> > + return 0;
> > +}
> > +
> > +/**
> > + Convert the SPDM hash algo ID from the TCG hash Algorithm ID.
> > +
> > + @param TcgAlgId TCG hash Algorithm ID
> > +
> > + @return SPDM hash algo ID
> > +**/
> > +UINT32
> > +TcgAlgIdToSpdmHashAlgo (
> > + IN UINT16 TcgAlgId
> > + )
> > +{
> > + switch (TcgAlgId) {
> > + case TPM_ALG_SHA256:
> > + return SPDM_ALGORITHMS_BASE_HASH_ALGO_TPM_ALG_SHA_256;
> > + case TPM_ALG_SHA384:
> > + case TPM_ALG_SHA512:
> > + case TPM_ALG_SM3_256:
> > + default:
> > + break;
> > + }
> > + return 0;
> > +}
> > +
> > +/**
> > + This function extend the PCI digest from the DvSec register.
> > +
> > + @param[in] PciIo The PciIo of the device.
> > + @param[in] DeviceSecurityPolicy The Device Security Policy associated
> > with the device.
> > + @param[in] TcgAlgId TCG hash Algorithm ID
> > + @param[in] DigestSel The digest selector
> > + @param[in] Digest The digest buffer
> > + @param[out] DeviceSecurityState The Device Security state associated
> > with the device.
> > +**/
> > +VOID
> > +ExtendDigestRegister (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN EDKII_DEVICE_SECURITY_POLICY *DeviceSecurityPolicy,
> > + IN UINT16 TcgAlgId,
> > + IN UINT8 DigestSel,
> > + IN UINT8 *Digest,
> > + OUT EDKII_DEVICE_SECURITY_STATE *DeviceSecurityState
> > + )
> > +{
> > + UINT32 PcrIndex;
> > + UINT32 EventType;
> > + EDKII_DEVICE_SECURITY_PCI_EVENT_DATA EventLog;
> > + EFI_STATUS Status;
> > + PCI_TYPE00 PciData;
> > +
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0,
> > + sizeof(PciData), &PciData); ASSERT_EFI_ERROR(Status);
> > +
> > + PcrIndex = EDKII_DEVICE_MEASUREMENT_COMPONENT_PCR_INDEX;
> > + EventType = EDKII_DEVICE_MEASUREMENT_COMPONENT_EVENT_TYPE;
> > +
> > + CopyMem (EventLog.EventData.Signature,
> > EDKII_DEVICE_SECURITY_EVENT_DATA_SIGNATURE,
> > sizeof(EventLog.EventData.Signature));
> > + EventLog.EventData.Version =
> > EDKII_DEVICE_SECURITY_EVENT_DATA_VERSION;
> > + EventLog.EventData.Length =
> > sizeof(EDKII_DEVICE_SECURITY_PCI_EVENT_DATA);
> > + EventLog.EventData.SpdmHashAlgo = TcgAlgIdToSpdmHashAlgo
> > (TcgAlgId);
> > + EventLog.EventData.DeviceType =
> > EDKII_DEVICE_SECURITY_EVENT_DATA_DEVICE_TYPE_PCI;
> > +
> > + EventLog.CommonHeader.Index = DigestSel;
> > + EventLog.CommonHeader.MeasurementSpecification =
> > SPDM_MEASUREMENT_BLOCK_HEADER_SPECIFICATION_DMTF;
> > + EventLog.CommonHeader.MeasurementSize =
> > sizeof(SPDM_MEASUREMENT_BLOCK_DMTF_HEADER) +
> > SHA256_DIGEST_SIZE;
> > + EventLog.DmtfHeader.DMTFSpecMeasurementValueType =
> > +
> > SPDM_MEASUREMENT_BLOCK_MEASUREMENT_TYPE_MUTABLE_FIRMWA
> > RE;
> > + EventLog.DmtfHeader.DMTFSpecMeasurementValueSize =
> > + SHA256_DIGEST_SIZE; CopyMem (&EventLog.Digest, Digest,
> > + SHA256_DIGEST_SIZE);
> > +
> > + EventLog.PciContext.Version =
> > EDKII_DEVICE_SECURITY_EVENT_DATA_PCI_CONTEXT_VERSION;
> > + EventLog.PciContext.Length =
> > sizeof(EDKII_DEVICE_SECURITY_EVENT_DATA_PCI_CONTEXT);
> > + EventLog.PciContext.VendorId = PciData.Hdr.VendorId;
> > + EventLog.PciContext.DeviceId = PciData.Hdr.DeviceId;
> > + EventLog.PciContext.RevisionID = PciData.Hdr.RevisionID;
> > + EventLog.PciContext.ClassCode[0] = PciData.Hdr.ClassCode[0];
> > + EventLog.PciContext.ClassCode[1] = PciData.Hdr.ClassCode[1];
> > + EventLog.PciContext.ClassCode[2] = PciData.Hdr.ClassCode[2];
> > + if ((PciData.Hdr.HeaderType & HEADER_LAYOUT_CODE) ==
> > HEADER_TYPE_DEVICE) {
> > + EventLog.PciContext.SubsystemVendorID =
> > PciData.Device.SubsystemVendorID;
> > + EventLog.PciContext.SubsystemID = PciData.Device.SubsystemID;
> > + } else {
> > + EventLog.PciContext.SubsystemVendorID = 0;
> > + EventLog.PciContext.SubsystemID = 0;
> > + }
> > +
> > + Status = TpmMeasureAndLogData (
> > + PcrIndex,
> > + EventType,
> > + &EventLog,
> > + EventLog.EventData.Length,
> > + Digest,
> > + SHA256_DIGEST_SIZE
> > + );
> > + DEBUG((DEBUG_INFO, "TpmMeasureAndLogData - %r\n", Status));
> > + if (EFI_ERROR(Status)) {
> > + DeviceSecurityState->MeasurementState =
> > +EDKII_DEVICE_SECURITY_STATE_ERROR_TCG_EXTEND_TPM_PCR;
> > + } else {
> > + RecordPciDeviceInList (PciIo,
> > +&mSecurityEventMeasurementDeviceList);
> > + }
> > +}
> > +
> > +/**
> > + This function reads the PCI digest from the DvSec register and extend to
> > TPM.
> > +
> > + @param[in] PciIo The PciIo of the device.
> > + @param[in] DvSecOffset The DvSec register offset of the device.
> > + @param[in] DeviceSecurityPolicy The Device Security Policy associated
> > with the device.
> > + @param[out] DeviceSecurityState The Device Security state associated
> > with the device.
> > +**/
> > +VOID
> > +DoMeasurementsFromDigestRegister (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN UINT32 DvSecOffset,
> > + IN EDKII_DEVICE_SECURITY_POLICY *DeviceSecurityPolicy,
> > + OUT EDKII_DEVICE_SECURITY_STATE *DeviceSecurityState
> > + )
> > +{
> > + UINT8 Modified;
> > + UINT8 Valid;
> > + UINT16 TcgAlgId;
> > + UINT8 NumDigest;
> > + UINT8 DigestSel;
> > + UINT8 Digest[SHA256_DIGEST_SIZE];
> > + UINTN DigestSize;
> > + EFI_STATUS Status;
> > +
> > + TcgAlgId = DvSecPciRead8 (
> > + PciIo,
> > + DvSecOffset + sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > OFFSET_OF(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE, TcgAlgId)
> > + );
> > + DEBUG((DEBUG_INFO, " TcgAlgId - 0x%04x\n", TcgAlgId));
> > + DigestSize = DigestSizeFromTcgAlgId (TcgAlgId); if (DigestSize == 0)
> > + {
> > + DEBUG((DEBUG_INFO, "Unsupported Algorithm - 0x%04x\n", TcgAlgId));
> > + DeviceSecurityState->MeasurementState =
> > EDKII_DEVICE_SECURITY_STATE_ERROR_PCI_NO_CAPABILITIES;
> > + return ;
> > + }
> > + DEBUG((DEBUG_INFO, " (DigestSize: 0x%x)\n", DigestSize));
> > +
> > + DeviceSecurityState->MeasurementState =
> > + EDKII_DEVICE_SECURITY_STATE_SUCCESS;
> > +
> > + NumDigest = DvSecPciRead8 (
> > + PciIo,
> > + DvSecOffset + sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > OFFSET_OF(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE, FirmwareID)
> > + );
> > + DEBUG((DEBUG_INFO, " NumDigest - 0x%02x\n", NumDigest));
> > +
> > + Valid = DvSecPciRead8 (
> > + PciIo,
> > + DvSecOffset + sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > OFFSET_OF(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE, Valid)
> > + );
> > + DEBUG((DEBUG_INFO, " Valid - 0x%02x\n", Valid));
> > +
> > + //
> > + // Only 2 are supported as maximum.
> > + // But hardware may report 3.
> > + //
> > + if (NumDigest > 2) {
> > + NumDigest = 2;
> > + }
> > +
> > + for (DigestSel = 0; DigestSel < NumDigest; DigestSel++) {
> > + DEBUG((DEBUG_INFO, " DigestSel - 0x%02x\n", DigestSel));
> > + if ((DigestSel == 0) && ((Valid & INTEL_PCI_DIGEST_0_VALID) == 0)) {
> > + continue;
> > + }
> > + if ((DigestSel == 1) && ((Valid & INTEL_PCI_DIGEST_1_VALID) == 0)) {
> > + continue;
> > + }
> > + while (TRUE) {
> > + //
> > + // Host MUST clear DIGEST_MODIFIED before read DIGEST.
> > + //
> > + DvSecPciWrite8 (
> > + PciIo,
> > + DvSecOffset + sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > OFFSET_OF(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE, Modified),
> > + INTEL_PCI_DIGEST_MODIFIED
> > + );
> > +
> > + Status = PciIo->Pci.Read (
> > + PciIo,
> > + EfiPciIoWidthUint8,
> > + (UINT32)(DvSecOffset +
> > sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > sizeof(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE) + DigestSize * DigestSel),
> > + DigestSize,
> > + Digest
> > + );
> > + ASSERT_EFI_ERROR(Status);
> > +
> > + //
> > + // After read DIGEST, Host MUST consult DIGEST_MODIFIED.
> > + //
> > + Modified = DvSecPciRead8 (
> > + PciIo,
> > + DvSecOffset + sizeof(INTEL_PCI_DIGEST_CAPABILITY_HEADER) +
> > OFFSET_OF(INTEL_PCI_DIGEST_CAPABILITY_STRUCTURE, Modified)
> > + );
> > + if ((Modified & INTEL_PCI_DIGEST_MODIFIED) == 0) {
> > + break;
> > + }
> > + }
> > +
> > + //
> > + // Dump Digest
> > + //
> > + {
> > + UINTN Index;
> > + DEBUG((DEBUG_INFO, " Digest - "));
> > + for (Index = 0; Index < DigestSize; Index++) {
> > + DEBUG((DEBUG_INFO, "%02x", *(Digest + Index)));
> > + }
> > + DEBUG((DEBUG_INFO, "\n"));
> > + }
> > +
> > + DEBUG((DEBUG_INFO, "ExtendDigestRegister...\n",
> > ExtendDigestRegister));
> > + ExtendDigestRegister (PciIo, DeviceSecurityPolicy, TcgAlgId,
> > +DigestSel, Digest, DeviceSecurityState);
> > + }
> > +}
> > +
> > +/**
> > + The device driver uses this service to measure a PCI device.
> > +
> > + @param[in] PciIo The PciIo of the device.
> > + @param[in] DeviceSecurityPolicy The Device Security Policy associated
> > with the device.
> > + @param[out] DeviceSecurityState The Device Security state associated
> > with the device.
> > +**/
> > +VOID
> > +DoDeviceMeasurement (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN EDKII_DEVICE_SECURITY_POLICY *DeviceSecurityPolicy,
> > + OUT EDKII_DEVICE_SECURITY_STATE *DeviceSecurityState
> > + )
> > +{
> > + UINT32 DvSecOffset;
> > + INTEL_PCI_DIGEST_CAPABILITY_HEADER DvSecHdr;
> > + EFI_STATUS Status;
> > +
> > + if (IsPciDeviceInList (PciIo, &mSecurityEventMeasurementDeviceList)) {
> > + DeviceSecurityState->MeasurementState =
> > EDKII_DEVICE_SECURITY_STATE_SUCCESS;
> > + return ;
> > + }
> > +
> > + DvSecOffset = GetPciExpressExtCapId (PciIo, INTEL_PCI_CAPID_DVSEC);
> > + DEBUG((DEBUG_INFO, "DvSec Capability - 0x%x\n", DvSecOffset)); if
> > + (DvSecOffset == 0) {
> > + DeviceSecurityState->MeasurementState =
> > EDKII_DEVICE_SECURITY_STATE_ERROR_PCI_NO_CAPABILITIES;
> > + return ;
> > + }
> > + Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16, DvSecOffset,
> > + sizeof(DvSecHdr)/sizeof(UINT16), &DvSecHdr);
> > ASSERT_EFI_ERROR(Status);
> > + DEBUG((DEBUG_INFO, " CapId - 0x%04x\n", DvSecHdr.CapId));
> > + DEBUG((DEBUG_INFO, " CapVersion - 0x%01x\n",
> > DvSecHdr.CapVersion));
> > + DEBUG((DEBUG_INFO, " NextOffset - 0x%03x\n",
> > DvSecHdr.NextOffset));
> > + DEBUG((DEBUG_INFO, " DvSecVendorId - 0x%04x\n",
> > + DvSecHdr.DvSecVendorId)); DEBUG((DEBUG_INFO, " DvSecRevision -
> > 0x%01x\n", DvSecHdr.DvSecRevision));
> > + DEBUG((DEBUG_INFO, " DvSecLength - 0x%03x\n",
> > DvSecHdr.DvSecLength));
> > + DEBUG((DEBUG_INFO, " DvSecId - 0x%04x\n", DvSecHdr.DvSecId));
> > + if ((DvSecHdr.DvSecVendorId != INTEL_PCI_DVSEC_VENDORID_INTEL) &&
> > + (DvSecHdr.DvSecId != INTEL_PCI_DVSEC_DVSECID_MEASUREMENT)) {
> > + DeviceSecurityState->MeasurementState =
> > EDKII_DEVICE_SECURITY_STATE_ERROR_PCI_NO_CAPABILITIES;
> > + return ;
> > + }
> > +
> > + DoMeasurementsFromDigestRegister (PciIo, DvSecOffset,
> > +DeviceSecurityPolicy, DeviceSecurityState); }
> > +
> > +/**
> > + The device driver uses this service to verify a PCI device.
> > +
> > + @param[in] PciIo The PciIo of the device.
> > + @param[in] DeviceSecurityPolicy The Device Security Policy associated
> > with the device.
> > + @param[out] DeviceSecurityState The Device Security state associated
> > with the device.
> > +**/
> > +VOID
> > +DoDeviceAuthentication (
> > + IN EFI_PCI_IO_PROTOCOL *PciIo,
> > + IN EDKII_DEVICE_SECURITY_POLICY *DeviceSecurityPolicy,
> > + OUT EDKII_DEVICE_SECURITY_STATE *DeviceSecurityState
> > + )
> > +{
> > + DeviceSecurityState->AuthenticationState =
> > +EDKII_DEVICE_SECURITY_STATE_ERROR_UEFI_UNSUPPORTED;
> > +}
> > +
> > +/**
> > + The device driver uses this service to measure and/or verify a device.
> > +
> > + The flow in device driver is:
> > + 1) Device driver discovers a new device.
> > + 2) Device driver creates an EFI_DEVICE_PATH_PROTOCOL.
> > + 3) Device driver creates a device access protocol. e.g.
> > + EFI_PCI_IO_PROTOCOL for PCI device.
> > + EFI_USB_IO_PROTOCOL for USB device.
> > + EFI_EXT_SCSI_PASS_THRU_PROTOCOL for SCSI device.
> > + EFI_ATA_PASS_THRU_PROTOCOL for ATA device.
> > + EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL for NVMe device.
> > + EFI_SD_MMC_PASS_THRU_PROTOCOL for SD/MMC device.
> > + 4) Device driver installs the EFI_DEVICE_PATH_PROTOCOL with
> > EFI_DEVICE_PATH_PROTOCOL_GUID,
> > + and the device access protocol with
> > EDKII_DEVICE_IDENTIFIER_TYPE_xxx_GUID.
> > + Once it is done, a DeviceHandle is returned.
> > + 5) Device driver creates EDKII_DEVICE_IDENTIFIER with
> > EDKII_DEVICE_IDENTIFIER_TYPE_xxx_GUID
> > + and the DeviceHandle.
> > + 6) Device driver calls DeviceAuthenticate().
> > + 7) If DeviceAuthenticate() returns EFI_SECURITY_VIOLATION, the device
> > driver uninstalls
> > + all protocols on this handle.
> > + 8) If DeviceAuthenticate() returns EFI_SUCCESS, the device driver installs
> > the device access
> > + protocol with a real protocol GUID. e.g.
> > + EFI_PCI_IO_PROTOCOL with EFI_PCI_IO_PROTOCOL_GUID.
> > + EFI_USB_IO_PROTOCOL with EFI_USB_IO_PROTOCOL_GUID.
> > +
> > + @param[in] This The protocol instance pointer.
> > + @param[in] DeviceId The Identifier for the device.
> > +
> > + @retval EFI_SUCCESS The device specified by the DeviceId passed
> > the measurement
> > + and/or authentication based upon the platform policy.
> > + If TCG measurement is required, the measurement is
> > extended to TPM PCR.
> > + @retval EFI_SECURITY_VIOLATION The device fails to return the
> > measurement data.
> > + @retval EFI_SECURITY_VIOLATION The device fails to response the
> > authentication request.
> > + @retval EFI_SECURITY_VIOLATION The system fails to verify the device
> > based upon the authentication response.
> > + @retval EFI_SECURITY_VIOLATION The system fails to extend the
> > measurement to TPM PCR.
> > +**/
> > +EFI_STATUS
> > +EFIAPI
> > +DeviceAuthentication (
> > + IN EDKII_DEVICE_SECURITY_PROTOCOL *This,
> > + IN EDKII_DEVICE_IDENTIFIER *DeviceId
> > + )
> > +{
> > + EDKII_DEVICE_SECURITY_POLICY DeviceSecurityPolicy;
> > + EDKII_DEVICE_SECURITY_STATE DeviceSecurityState;
> > + EFI_PCI_IO_PROTOCOL *PciIo;
> > + EFI_STATUS Status;
> > +
> > + if (mDeviceSecurityPolicy == NULL) {
> > + return EFI_SUCCESS;
> > + }
> > +
> > + if (!CompareGuid (&DeviceId->DeviceType,
> > &gEdkiiDeviceIdentifierTypePciGuid)) {
> > + return EFI_SUCCESS;
> > + }
> > +
> > + Status = gBS->HandleProtocol (
> > + DeviceId->DeviceHandle,
> > + &gEdkiiDeviceIdentifierTypePciGuid,
> > + (VOID **)&PciIo
> > + );
> > + if (EFI_ERROR(Status)) {
> > + DEBUG ((DEBUG_ERROR, "Locate - DeviceIdentifierTypePci - %r\n",
> > Status));
> > + return EFI_SUCCESS;
> > + }
> > +
> > + DeviceSecurityState.Version = EDKII_DEVICE_SECURITY_STATE_REVISION;
> > + DeviceSecurityState.MeasurementState = 0x0;
> > + DeviceSecurityState.AuthenticationState = 0x0;
> > +
> > + Status = mDeviceSecurityPolicy->GetDevicePolicy
> > + (mDeviceSecurityPolicy, DeviceId, &DeviceSecurityPolicy); if
> > (EFI_ERROR(Status)) {
> > + DEBUG((DEBUG_ERROR, "mDeviceSecurityPolicy->GetDevicePolicy -
> > %r\n", Status));
> > + DeviceSecurityState.MeasurementState =
> > EDKII_DEVICE_SECURITY_STATE_ERROR_UEFI_GET_POLICY_PROTOCOL;
> > + DeviceSecurityState.AuthenticationState =
> > + EDKII_DEVICE_SECURITY_STATE_ERROR_UEFI_GET_POLICY_PROTOCOL;
> > + } else {
> > + if ((DeviceSecurityPolicy.MeasurementPolicy &
> > EDKII_DEVICE_MEASUREMENT_REQUIRED) != 0) {
> > + DoDeviceMeasurement (PciIo, &DeviceSecurityPolicy,
> > &DeviceSecurityState);
> > + DEBUG((DEBUG_ERROR, "MeasurementState - 0x%08x\n",
> > DeviceSecurityState.MeasurementState));
> > + }
> > + if ((DeviceSecurityPolicy.AuthenticationPolicy &
> > EDKII_DEVICE_AUTHENTICATION_REQUIRED) != 0) {
> > + DoDeviceAuthentication (PciIo, &DeviceSecurityPolicy,
> > &DeviceSecurityState);
> > + DEBUG((DEBUG_ERROR, "AuthenticationState - 0x%08x\n",
> > DeviceSecurityState.AuthenticationState));
> > + }
> > + }
> > +
> > + Status = mDeviceSecurityPolicy->NotifyDeviceState
> > + (mDeviceSecurityPolicy, DeviceId, &DeviceSecurityState); if
> > (EFI_ERROR(Status)) {
> > + DEBUG((DEBUG_ERROR, "mDeviceSecurityPolicy->NotifyDeviceState -
> > + %r\n", Status)); }
> > +
> > + if ((DeviceSecurityState.MeasurementState == 0) &&
> > + (DeviceSecurityState.AuthenticationState == 0)) {
> > + return EFI_SUCCESS;
> > + } else {
> > + return EFI_SECURITY_VIOLATION;
> > + }
> > +}
> > +
> > +EDKII_DEVICE_SECURITY_PROTOCOL mDeviceSecurity = {
> > + EDKII_DEVICE_SECURITY_PROTOCOL_REVISION,
> > + DeviceAuthentication
> > +};
> > +
> > +/**
> > + Entrypoint of the device security driver.
> > +
> > + @param[in] ImageHandle ImageHandle of the loaded driver @param[in]
> > + SystemTable Pointer to the System Table
> > +
> > + @retval EFI_SUCCESS The Protocol is installed.
> > + @retval EFI_OUT_OF_RESOURCES Not enough resources available to
> > initialize driver.
> > + @retval EFI_DEVICE_ERROR A device error occurred attempting to
> > initialize the driver.
> > +
> > +**/
> > +EFI_STATUS
> > +EFIAPI
> > +MainEntryPoint (
> > + IN EFI_HANDLE ImageHandle,
> > + IN EFI_SYSTEM_TABLE *SystemTable
> > + )
> > +{
> > + EFI_HANDLE Handle;
> > + EFI_STATUS Status;
> > +
> > + Status = gBS->LocateProtocol
> > + (&gEdkiiDeviceSecurityPolicyProtocolGuid, NULL, (VOID
> > + **)&mDeviceSecurityPolicy); ASSERT_EFI_ERROR(Status);
> > +
> > + Handle = NULL;
> > + Status = gBS->InstallProtocolInterface (
> > + &Handle,
> > + &gEdkiiDeviceSecurityProtocolGuid,
> > + EFI_NATIVE_INTERFACE,
> > + (VOID **)&mDeviceSecurity
> > + );
> > + ASSERT_EFI_ERROR(Status);
> > +
> > + return Status;
> > +}
> > diff --git
> > a/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDx
> > e/IntelPciDeviceSecurityDxe.inf
> > b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityD
> > xe/IntelPciDeviceSecurityDxe.inf
> > new file mode 100644
> > index 0000000000..89a4c8fadd
> > --- /dev/null
> > +++ b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceS
> > +++ ecurityDxe/IntelPciDeviceSecurityDxe.inf
> > @@ -0,0 +1,45 @@
> > +## @file
> > +# EDKII Device Security library for PCI device # # Copyright (c) 2019,
> > +Intel Corporation. All rights reserved.<BR> # SPDX-License-Identifier:
> > +BSD-2-Clause-Patent # ##
> > +
> > +[Defines]
> > + INF_VERSION = 0x00010005
> > + BASE_NAME = IntelPciDeviceSecurityDxe
> > + FILE_GUID = D9569195-ED94-47D2-9523-38BF2D201371
> > + MODULE_TYPE = DXE_DRIVER
> > + VERSION_STRING = 1.0
> > + ENTRY_POINT = MainEntryPoint
> > +
> > +[Sources]
> > + IntelPciDeviceSecurityDxe.c
> > + TcgDeviceEvent.h
> > +
> > +[Packages]
> > + MdePkg/MdePkg.dec
> > + MdeModulePkg/MdeModulePkg.dec
> > + IntelSiliconPkg/IntelSiliconPkg.dec
> > +
> > +[LibraryClasses]
> > + UefiRuntimeServicesTableLib
> > + UefiBootServicesTableLib
> > + UefiDriverEntryPoint
> > + MemoryAllocationLib
> > + DevicePathLib
> > + BaseMemoryLib
> > + PrintLib
> > + DebugLib
> > + UefiLib
> > + PcdLib
> > + TpmMeasurementLib
> > +
> > +[Protocols]
> > + gEdkiiDeviceSecurityPolicyProtocolGuid ## CONSUMES
> > + gEdkiiDeviceSecurityProtocolGuid ## PRODUCES
> > + gEdkiiDeviceIdentifierTypePciGuid ## COMSUMES
> > +
> > +[Depex]
> > + gEdkiiDeviceSecurityPolicyProtocolGuid
> > diff --git
> > a/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityDx
> > e/TcgDeviceEvent.h
> > b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceSecurityD
> > xe/TcgDeviceEvent.h
> > new file mode 100644
> > index 0000000000..5b642b3ecc
> > --- /dev/null
> > +++ b/Silicon/Intel/IntelSiliconPkg/Feature/PcieSecurity/IntelPciDeviceS
> > +++ ecurityDxe/TcgDeviceEvent.h
> > @@ -0,0 +1,178 @@
> > +/** @file
> > + TCG Device Event data structure
> > +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> > +SPDX-License-Identifier: BSD-2-Clause-Patent **/
> > +
> > +
> > +#ifndef __TCG_EVENT_DATA_H__
> > +#define __TCG_EVENT_DATA_H__
> > +
> > +#include <IndustryStandard/Spdm.h>
> > +
> > +#pragma pack(1)
> > +
> > +// -------------------------------------------
> > +// TCG Measurement for SPDM Device Measurement //
> > +-------------------------------------------
> > +
> > +//
> > +// Device Firmware Component (including immutable ROM or mutable
> > +firmware) //
> > +#define EDKII_DEVICE_MEASUREMENT_COMPONENT_PCR_INDEX 2
> > +#define EDKII_DEVICE_MEASUREMENT_COMPONENT_EVENT_TYPE
> > 0x800000E1
> > +//
> > +// Device Firmware Configuration (including hardware configuration or
> > +firmware configuration) //
> > +#define EDKII_DEVICE_MEASUREMENT_CONFIGURATION_PCR_INDEX 4
> > +#define EDKII_DEVICE_MEASUREMENT_CONFIGURATION_EVENT_TYPE
> > 0x800000E2
> > +
> > +//
> > +// Device Firmware Measurement Measurement Data // The measurement
> > data
> > +is the device firmware measurement.
> > +//
> > +// In order to support crypto agile, the firmware will hash the
> > DeviceMeasurement again.
> > +// As such the device measurement algo might be different with host
> > firmware measurement algo.
> > +//
> > +
> > +//
> > +// Device Firmware Measurement Event Data // #define
> > +EDKII_DEVICE_SECURITY_EVENT_DATA_SIGNATURE "SPDM Device Sec\0"
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_VERSION 0
> > +
> > +//
> > +// Device Type
> > +// 0x03 ~ 0xDF reserved by TCG.
> > +// 0xE0 ~ 0xFF reserved by OEM.
> > +//
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_DEVICE_TYPE_NULL 0
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_DEVICE_TYPE_PCI 1
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_DEVICE_TYPE_USB 2
> > +
> > +//
> > +// Device Firmware Measurement Event Data Common Part // The device
> > +specific part should follow this data structure.
> > +//
> > +typedef struct {
> > + //
> > + // It must be EDKII_DEVICE_SECURITY_EVENT_DATA_SIGNATURE.
> > + //
> > + UINT8 Signature[16];
> > + //
> > + // It must be EDKII_DEVICE_SECURITY_EVENT_DATA_VERSION.
> > + //
> > + UINT16 Version;
> > + //
> > + // The length of whole data structure, including Device Context.
> > + //
> > + UINT16 Length;
> > + //
> > + // The SpdmHashAlgo
> > + //
> > + UINT32 SpdmHashAlgo;
> > + //
> > + // The type of device. This field is to determine the Device Context
> > followed by.
> > + //
> > + UINT32 DeviceType;
> > + //
> > + // The SPDM measurement block.
> > + //
> > +//SPDM_MEASUREMENT_BLOCK SpdmMeasurementBlock;
> > +} EDKII_DEVICE_SECURITY_EVENT_DATA_HEADER;
> > +
> > +//
> > +// PCI device specific context
> > +//
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_PCI_CONTEXT_VERSION 0
> > typedef
> > +struct {
> > + UINT16 Version;
> > + UINT16 Length;
> > + UINT16 VendorId;
> > + UINT16 DeviceId;
> > + UINT8 RevisionID;
> > + UINT8 ClassCode[3];
> > + UINT16 SubsystemVendorID;
> > + UINT16 SubsystemID;
> > +} EDKII_DEVICE_SECURITY_EVENT_DATA_PCI_CONTEXT;
> > +
> > +//
> > +// USB device specific context
> > +//
> > +#define EDKII_DEVICE_SECURITY_EVENT_DATA_USB_CONTEXT_VERSION
> > 0 typedef
> > +struct {
> > + UINT16 Version;
> > + UINT16 Length;
> > +//UINT8 DeviceDescriptor[DescLen];
> > +//UINT8 BodDescriptor[DescLen];
> > +//UINT8 ConfigurationDescriptor[DescLen][NumOfConfiguration];
> > +} EDKII_DEVICE_SECURITY_EVENT_DATA_USB_CONTEXT;
> > +
> > +// ----------------------------------------------
> > +// TCG Measurement for SPDM Device Authentication //
> > +----------------------------------------------
> > +
> > +//
> > +// Device Root cert is stored into a UEFI authenticated variable.
> > +// It is non-volatile, boot service, runtime service, and time based
> > authenticated variable.
> > +// The "devdb" includes a list of allowed device root cert.
> > +// The "devdbx" includes a list of forbidden device root cert.
> > +// The usage of "devdb" and "devdbx" is same as "db" and "dbx" in UEFI
> > secure boot.
> > +//
> > +// NOTE: We choose not to mix "db"/"dbx" for better management
> > purpose.
> > +//
> > +
> > +#define EDKII_DEVICE_ROOT_CERT_VARAIBLE_NAME L"devdb"
> > +#define EDKII_DEVICE_ROOT_CERT_VARAIBLE2_NAME L"devdbx"
> > +
> > +#define EDKII_DEVICE_SIGNATURE_DATABASE_GUID \
> > + {0xb9c2b4f4, 0xbf5f, 0x462d, 0x8a, 0xdf, 0xc5, 0xc7, 0xa, 0xc3, 0x5d,
> > +0xad}
> > +
> > +//
> > +// Platform Firmware adhering to the policy MUST therefore measure the
> > following values into PCR[7]:
> > +// 1. The content of the
> > EDKII_DEVICE_SIGNATURE_DATABASE_GUID/EDKII_DEVICE_ROOT_CERT_V
> > ARAIBLE_NAME variable.
> > +// 2. The content of the
> > EDKII_DEVICE_SIGNATURE_DATABASE_GUID/EDKII_DEVICE_ROOT_CERT_V
> > ARAIBLE2_NAME variable.
> > +// 3. Entries in the
> > EDKII_DEVICE_SIGNATURE_DATABASE_GUID/EDKII_DEVICE_ROOT_CERT_V
> > ARAIBLE_NAME variable to
> > +// authenticate the device.
> > +//
> > +// For all UEFI variable value events, the eventType SHALL be
> > +EV_EFI_VARIABLE_DRIVER_CONFIG and the Event // value SHALL be the
> > value of the UEFI_VARIABLE_DATA structure (this structure SHALL be
> > considered byte-aligned).
> > +// The measurement digest MUST be tagged Hash for each supported PCR
> > +bank of the event data which is the // UEFI_VARIABLE_DATA structure.
> > +The UEFI_VARIABLE_DATA.UnicodeNameLength value is the number of
> > CHAR16 // characters (not the number of bytes). The
> > UEFI_VARIABLE_DATA.UnicodeName contents MUST NOT include a NUL.
> > +// If reading a UEFI variable returns UEFI_NOT_FOUND, the
> > +UEFI_VARIABLE_DATA.VariableDataLength field MUST // be set to zero and
> > UEFI_VARIABLE_DATA.VariableData field will have a size of zero.
> > +//
> > +
> > +//
> > +// Entities that MUST be measured if the TPM is enabled:
> > +// 1. Before executing any code not cryptographically authenticated as
> > being provided by the Platform Manufacturer,
> > +// the Platform Manufacturer firmware MUST measure the following
> > values, in the order listed using the
> > +// EV_EFI_VARIABLE_DRIVER_CONFIG event type to PCR[7]:
> > +// a) The content of the EDKII_DEVICE_SIGNATURE_DATABASE_GUID/
> > EDKII_DEVICE_ROOT_CERT_VARAIBLE_NAME variable.
> > +// b) The content of the EDKII_DEVICE_SIGNATURE_DATABASE_GUID/
> > EDKII_DEVICE_ROOT_CERT_VARAIBLE2_NAME variable.
> > +// 2. If the platform supports changing any of the following UEFI policy
> > variables after they are initially measured
> > +// in PCR[7] and before ExitBootServices() has completed, the platform
> > MAY be restarted OR the variables MUST be
> > +// remeasured into PCR[7]. Additionally the normal update process for
> > setting any of the UEFI variables below SHOULD
> > +// occur before the initial measurement in PCR[7] or after the call to
> > ExitBootServices() has completed.
> > +// a) The content of the EDKII_DEVICE_SIGNATURE_DATABASE_GUID/
> > EDKII_DEVICE_ROOT_CERT_VARAIBLE_NAME variable.
> > +// b) The content of the EDKII_DEVICE_SIGNATURE_DATABASE_GUID/
> > EDKII_DEVICE_ROOT_CERT_VARAIBLE2_NAME variable.
> > +// 3. The system SHALL measure the EV_SEPARATOR event in PCR[7]. (This
> > occurs at the same time the separator is
> > +// measured to PCR[0-7].)
> > +// Before setting up a device, the UEFI firmware SHALL determine if the
> > entry in the
> > +// EDKII_DEVICE_SIGNATURE_DATABASE_GUID/
> > EDKII_DEVICE_ROOT_CERT_VARAIBLE_NAME variable that was used to
> > validate
> > +// the device has previously been measured in PCR[7]. If it has not been, it
> > MUST be measured into PCR[7] as follows.
> > +// If it has been measured previously, it MUST NOT be measured again.
> > The measurement SHALL occur in conjunction
> > +// with device setup.
> > +// a) The eventType SHALL be EV_EFI_VARIABLE_AUTHORITY.
> > +// b) The event value SHALL be the value of the UEFI_VARIABLE_DATA
> > structure.
> > +// i. The UEFI_VARIABLE_DATA.VariableData value SHALL be the
> > UEFI_SIGNATURE_DATA value from the
> > +// UEFI_SIGNATURE_LIST that contained the authority that was used
> > to validate the image.
> > +// ii. The UEFI_VARIABLE_DATA.VariableName SHALL be set to
> > UEFI_IMAGE_SECURITY_DATABASE_GUID.
> > +// iii. The UEFI_VARIABLE_DATA.UnicodeName SHALL be set to the value
> > of UEFI_IMAGE_SECURITY_DATABASE.
> > +// The value MUST NOT include the terminating NUL.
> > +//
> > +
> > +#pragma pack()
> > +
> > +#endif
> > --
> > 2.19.2.windows.1
next prev parent reply other threads:[~2019-11-11 10:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-07 13:38 [PATCH V3 0/6] Add Device Security driver Yao, Jiewen
2019-11-07 13:38 ` [PATCH V3 1/6] IntelSiliconPkg/Include: Add Intel PciSecurity definition Yao, Jiewen
2019-11-08 6:58 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 2/6] IntelSiliconPkg/Include: Add Platform Device Security Policy protocol Yao, Jiewen
2019-11-08 6:59 ` Ni, Ray
2019-11-08 7:01 ` Yao, Jiewen
2019-11-08 7:10 ` Ni, Ray
2019-11-09 7:12 ` Yao, Jiewen
2019-11-07 13:38 ` [PATCH V3 3/6] IntelSiliconPkg/dec: Add ProtocolGuid definition Yao, Jiewen
2019-11-08 7:01 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 4/6] IntelSiliconPkg/IntelPciDeviceSecurityDxe: Add PciSecurity Yao, Jiewen
2019-11-11 8:19 ` Ni, Ray
2019-11-11 10:16 ` Yao, Jiewen [this message]
2019-11-11 14:40 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 5/6] IntelSiliconPkg/SamplePlatformDevicePolicyDxe: Add sample policy Yao, Jiewen
2019-11-11 8:23 ` Ni, Ray
2019-11-07 13:38 ` [PATCH V3 6/6] IntelSiliconPkg/dsc: Add Device Security component Yao, Jiewen
2019-11-11 8:23 ` Ni, Ray
2019-11-08 4:23 ` [edk2-devel] [PATCH V3 0/6] Add Device Security driver Javeed, Ashraf
2019-11-08 5:14 ` Yao, Jiewen
2019-11-08 10:25 ` Javeed, Ashraf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=74D8A39837DF1E4DA445A8C0B3885C503F84D1AB@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox