Re: [Patch] NetworkPkg: Record user configured TargetIP/Port in iBFT

["Zhang, Lubo" <lubo.zhang@intel.com>]

Reviewed-by: Zhang Lubo <lubo.zhang@intel.com>

-----Original Message-----
From: Ye, Ting 
Sent: Thursday, September 29, 2016 1:59 PM
To: edk2-devel@lists.01.org
Cc: Subramanian; Sriram <sriram-s@hpe.com>; Fu, Siyuan <siyuan.fu@intel.com>; Zhang, Lubo <lubo.zhang@intel.com>
Subject: [Patch] NetworkPkg: Record user configured TargetIP/Port in iBFT

Current ISCSI driver records redirected iSCSI targetIP/Port in iBFT once redirection occurs, which removes the possibility of the OS to reconnect to the configured IP for load balancing. The behavior is not explicitly described in IBFT spec, though the MSFT expert confirm we should record original user setting rather than publish the redirected IP.

Thanks Sriram for reviewing and validating this patch in his test-bed.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ye Ting <ting.ye@intel.com>
Cc: Subramanian, Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
---
 NetworkPkg/IScsiDxe/IScsiDriver.c | 19 +++++++++++++++++++
 NetworkPkg/IScsiDxe/IScsiMisc.c   | 10 +++++-----
 NetworkPkg/IScsiDxe/IScsiMisc.h   |  7 ++++++-
 NetworkPkg/IScsiDxe/IScsiProto.c  | 36 +++++++++++++++++++++++++-----------
 4 files changed, 55 insertions(+), 17 deletions(-)

diff --git a/NetworkPkg/IScsiDxe/IScsiDriver.c b/NetworkPkg/IScsiDxe/IScsiDriver.c
index c3ab2c9..279f1c0 100644
--- a/NetworkPkg/IScsiDxe/IScsiDriver.c
+++ b/NetworkPkg/IScsiDxe/IScsiDriver.c
@@ -356,10 +356,11 @@ IScsiStart (
   CHAR16                          MacString[ISCSI_MAX_MAC_STRING_LEN];
   BOOLEAN                         NeedUpdate;
   VOID                            *Interface;
   EFI_GUID                        *ProtocolGuid;
   UINT8                           NetworkBootPolicy;
+  ISCSI_SESSION_CONFIG_NVDATA     *NvData;
 
   //
   // Test to see if iSCSI driver supports the given controller.
   //
 
@@ -699,10 +700,28 @@ IScsiStart (
       Status = IScsiSessionLogin (Session);
     } else if (Status == EFI_NOT_READY) {
       Status = IScsiSessionReLogin (Session);
     }
 
+    //
+    // Restore the origial user setting which specifies the proxy/virtual iSCSI target to NV region.
+    //
+    NvData = &AttemptConfigData->SessionConfigData;
+    if (NvData->RedirectFlag) {
+      NvData->TargetPort = NvData->OriginalTargetPort;
+      CopyMem (&NvData->TargetIp, &NvData->OriginalTargetIp, sizeof (EFI_IP_ADDRESS));
+      NvData->RedirectFlag = FALSE;
+
+      gRT->SetVariable (
+             mPrivate->PortString,
+             &gEfiIScsiInitiatorNameProtocolGuid,
+             ISCSI_CONFIG_VAR_ATTR,
+             sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
+             AttemptConfigData
+             );
+    }
+
     if (EFI_ERROR (Status)) {
       //
       // In Single path mode, only the successful attempt will be recorded in iBFT;
       // in multi-path mode, all the attempt entries in MPIO will be recorded in iBFT.
       //
diff --git a/NetworkPkg/IScsiDxe/IScsiMisc.c b/NetworkPkg/IScsiDxe/IScsiMisc.c index a39c268..64bb2ad 100644
--- a/NetworkPkg/IScsiDxe/IScsiMisc.c
+++ b/NetworkPkg/IScsiDxe/IScsiMisc.c
@@ -1186,15 +1186,15 @@ IScsiGetConfigData (
       MacString,
       (UINTN) AttemptConfigOrder[Index]
       );
 
     GetVariable2 (
-                 mPrivate->PortString,
-                 &gEfiIScsiInitiatorNameProtocolGuid,
-                 (VOID**)&AttemptConfigData,
-                 NULL
-                 );
+      mPrivate->PortString,
+      &gEfiIScsiInitiatorNameProtocolGuid,
+      (VOID**)&AttemptConfigData,
+      NULL
+      );
 
     if (AttemptConfigData == NULL) {
       continue;
     }
 
diff --git a/NetworkPkg/IScsiDxe/IScsiMisc.h b/NetworkPkg/IScsiDxe/IScsiMisc.h index 1bcaeb8..912a871 100644
--- a/NetworkPkg/IScsiDxe/IScsiMisc.h
+++ b/NetworkPkg/IScsiDxe/IScsiMisc.h
@@ -48,13 +48,18 @@ typedef struct _ISCSI_SESSION_CONFIG_NVDATA {
   CHAR8             TargetName[ISCSI_NAME_MAX_SIZE];
   EFI_IP_ADDRESS    TargetIp;
   UINT8             PrefixLength;
   UINT8             BootLun[8];
 
-  UINT16            ConnectTimeout; ///< timout value in milliseconds
+  UINT16            ConnectTimeout; ///< timout value in milliseconds.
   UINT8             ConnectRetryCount;
   UINT8             IsId[6];
+
+  BOOLEAN           RedirectFlag;
+  UINT16            OriginalTargetPort;     // The port of proxy/virtual target.
+  EFI_IP_ADDRESS    OriginalTargetIp;       // The address of proxy/virtual target.
+  
 } ISCSI_SESSION_CONFIG_NVDATA;
 #pragma pack()
 
 /**
   Calculate the prefix length of the IPv4 subnet mask.
diff --git a/NetworkPkg/IScsiDxe/IScsiProto.c b/NetworkPkg/IScsiDxe/IScsiProto.c
index 5092365..88d9bdd 100644
--- a/NetworkPkg/IScsiDxe/IScsiProto.c
+++ b/NetworkPkg/IScsiDxe/IScsiProto.c
@@ -1067,24 +1067,26 @@ IScsiUpdateTargetAddress (
   IN OUT ISCSI_SESSION         *Session,
   IN     CHAR8                 *Data,
   IN     UINT32                Len
   )
 {
-  LIST_ENTRY      *KeyValueList;
-  CHAR8           *TargetAddress;
-  CHAR8           *IpStr;
-  EFI_STATUS      Status;
-  UINTN           Number;
-  UINT8           IpMode;
+  LIST_ENTRY                   *KeyValueList;
+  CHAR8                        *TargetAddress;
+  CHAR8                        *IpStr;
+  EFI_STATUS                   Status;
+  UINTN                        Number;
+  UINT8                        IpMode;
+  ISCSI_SESSION_CONFIG_NVDATA  *NvData;
 
   KeyValueList = IScsiBuildKeyValueList (Data, Len);
   if (KeyValueList == NULL) {
     return EFI_OUT_OF_RESOURCES;
   }
 
   Status = EFI_NOT_FOUND;
-
+  NvData = &Session->ConfigData->SessionConfigData;
+ 
   while (TRUE) {
     TargetAddress = IScsiGetValueByKeyFromList (KeyValueList, ISCSI_KEY_TARGET_ADDRESS);
     if (TargetAddress == NULL) {
       break;
     }
@@ -1096,10 +1098,15 @@ IScsiUpdateTargetAddress (
       // IPv4 address.
       //
       continue;
     }
 
+    //
+    // Save the origial user setting which specifies the proxy/virtual iSCSI target.
+    //
+    NvData->OriginalTargetPort = NvData->TargetPort;
+
     IpStr = TargetAddress;
 
     while ((*TargetAddress != 0) && (*TargetAddress != ':') && (*TargetAddress != ',')) {
       //
       // NULL, ':', or ',' ends the IPv4 string.
@@ -1120,23 +1127,29 @@ IScsiUpdateTargetAddress (
 
       Number = AsciiStrDecimalToUintn (TargetAddress);
       if (Number > 0xFFFF) {
         continue;
       } else {
-        Session->ConfigData->SessionConfigData.TargetPort = (UINT16) Number;
+        NvData->TargetPort = (UINT16) Number;
       }
     } else {
       //
       // The string only contains the IPv4 address. Use the well-known port.
       //
-      Session->ConfigData->SessionConfigData.TargetPort = ISCSI_WELL_KNOWN_PORT;
+      NvData->TargetPort = ISCSI_WELL_KNOWN_PORT;
     }
+
+    //
+    // Save the origial user setting which specifies the proxy/virtual iSCSI target.
+    //    
+    CopyMem (&NvData->OriginalTargetIp, &NvData->TargetIp, sizeof 
+ (EFI_IP_ADDRESS));
+
     //
     // Update the target IP address.
     //
-    if (Session->ConfigData->SessionConfigData.IpMode < IP_MODE_AUTOCONFIG) {
-      IpMode = Session->ConfigData->SessionConfigData.IpMode;
+    if (NvData->IpMode < IP_MODE_AUTOCONFIG) {
+      IpMode = NvData->IpMode;
     } else {
       IpMode = Session->ConfigData->AutoConfigureMode;
     }
 
     Status = IScsiAsciiStrToIp (
@@ -1146,10 +1159,11 @@ IScsiUpdateTargetAddress (
                );
 
     if (EFI_ERROR (Status)) {
       continue;
     } else {
+      NvData->RedirectFlag = TRUE;
       break;
     }
   }
 
   IScsiFreeKeyValueList (KeyValueList);
--
1.9.0.msysgit.0