From: "Laszlo Ersek" <lersek@redhat.com>
To: "Ni, Ray" <ray.ni@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "afish@apple.com" <afish@apple.com>,
"leif.lindholm@linaro.org" <leif.lindholm@linaro.org>
Subject: Re: [edk2-devel] [PATCH] [edk2-stable201908] MdePkg/BluetoothLeConfig.h: Add type EfiBluetoothSmpPeerAddressList
Date: Tue, 27 Aug 2019 14:47:54 +0200 [thread overview]
Message-ID: <79924d2c-0185-a71c-ae92-bcad8437e5ce@redhat.com> (raw)
In-Reply-To: <734D49CCEBEEF84792F5B80ED585239D5C29CEF9@SHSMSX104.ccr.corp.intel.com>
On 08/27/19 02:45, Ni, Ray wrote:
> The consumers are in close source and won't be in open source in near future.
> But consumers depend on open source repo.
In my interpretation, this patch does not qualify as a bugfix (suitable
for merging during the hard feature freeze), and should be postponed to
the next development cycle.
Thanks
Laszlo
>
>> -----Original Message-----
>> From: Kinney, Michael D
>> Sent: Monday, August 26, 2019 5:20 PM
>> To: Gao, Liming <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; devel@edk2.groups.io; Kinney, Michael D
>> <michael.d.kinney@intel.com>
>> Cc: afish@apple.com; leif.lindholm@linaro.org; Laszlo Ersek (lersek@redhat.com) <lersek@redhat.com>
>> Subject: RE: [edk2-devel] [PATCH] [edk2-stable201908] MdePkg/BluetoothLeConfig.h: Add type
>> EfiBluetoothSmpPeerAddressList
>>
>> Ray,
>>
>> Are there any components that need these new enum values?
>>
>> The patch looks very straightforward and is from the
>> UEFI Spec, so I think the risk is low. But if consumers
>> will not show up until after the stable tag, perhaps this
>> should be one of the first patches after the stable tag.
>>
>> Thanks,
>>
>> Mike
>>
>>> -----Original Message-----
>>> From: Gao, Liming
>>> Sent: Monday, August 26, 2019 4:57 PM
>>> To: Ni, Ray <ray.ni@intel.com>; devel@edk2.groups.io
>>> Cc: Kinney, Michael D <michael.d.kinney@intel.com>;
>>> afish@apple.com; leif.lindholm@linaro.org; Laszlo Ersek
>>> (lersek@redhat.com) <lersek@redhat.com>
>>> Subject: RE: [edk2-devel] [PATCH] [edk2-stable201908]
>>> MdePkg/BluetoothLeConfig.h: Add type
>>> EfiBluetoothSmpPeerAddressList
>>>
>>> Cc to all Stewards.
>>>
>>>> -----Original Message-----
>>>> From: Ni, Ray
>>>> Sent: Tuesday, August 27, 2019 2:20 AM
>>>> To: devel@edk2.groups.io; Ni, Ray <ray.ni@intel.com>
>>>> Cc: Kinney, Michael D <michael.d.kinney@intel.com>;
>>> Gao, Liming
>>>> <liming.gao@intel.com>
>>>> Subject: RE: [edk2-devel] [PATCH] [edk2-stable201908]
>>>> MdePkg/BluetoothLeConfig.h: Add type
>>> EfiBluetoothSmpPeerAddressList
>>>>
>>>> I understand it's now in code freeze phase.
>>>> Just make a try to see whether this very clean/simple
>>> header file
>>>> change can be included in the stable tag.
>>>> Any platform that uses BLE stack can get benefit from
>>> this definition update.
>>>>
>>>>> -----Original Message-----
>>>>> From: devel@edk2.groups.io <devel@edk2.groups.io> On
>>> Behalf Of Ni,
>>>>> Ray
>>>>> Sent: Monday, August 26, 2019 11:16 AM
>>>>> To: devel@edk2.groups.io
>>>>> Cc: Kinney, Michael D <michael.d.kinney@intel.com>;
>>> Gao, Liming
>>>> <liming.gao@intel.com>
>>>>> Subject: [edk2-devel] [PATCH] [edk2-stable201908]
>>>> MdePkg/BluetoothLeConfig.h: Add type
>>> EfiBluetoothSmpPeerAddressList
>>>>>
>>>>> To support auto-connection,
>>> EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs
>>>> to
>>>>> add a new data type EfiBluetoothSmpPeerAddressList
>>> which associates
>>>>> with a list of Bluetooth per address connected
>>> before.
>>>>>
>>>>> This new data type was added in UEFI spec 2.7b.
>>>>>
>>>>> Signed-off-by: Ray Ni <ray.ni@intel.com>
>>>>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>>>>> Cc: Liming Gao <liming.gao@intel.com>
>>>>> ---
>>>>> MdePkg/Include/Protocol/BluetoothLeConfig.h | 4 +++-
>>>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git
>>> a/MdePkg/Include/Protocol/BluetoothLeConfig.h
>>>> b/MdePkg/Include/Protocol/BluetoothLeConfig.h
>>>>> index 8c0f881f85..8726a58b15 100644
>>>>> --- a/MdePkg/Include/Protocol/BluetoothLeConfig.h
>>>>> +++ b/MdePkg/Include/Protocol/BluetoothLeConfig.h
>>>>> @@ -2,7 +2,7 @@
>>>>> EFI Bluetooth LE Config Protocol as defined in
>>> UEFI 2.7.
>>>>> This protocol abstracts user interface
>>> configuration for BluetoothLe device.
>>>>>
>>>>> - Copyright (c) 2017, Intel Corporation. All rights
>>> reserved.<BR>
>>>>> + Copyright (c) 2017 - 2019, Intel Corporation. All
>>> rights
>>>>> + reserved.<BR>
>>>>> SPDX-License-Identifier: BSD-2-Clause-Patent
>>>>>
>>>>> @par Revision Reference:
>>>>> @@ -451,6 +451,8 @@ typedef enum {
>>>>> EfiBluetoothSmpLocalCSRK, /* If Key hierarchy not
>>> supported */
>>>>> EfiBluetoothSmpLocalSignCounter,
>>>>> EfiBluetoothSmpLocalDIV,
>>>>> + EfiBluetoothSmpPeerAddressList,
>>>>> + EfiBluetoothSmpMax,
>>>>> } EFI_BLUETOOTH_LE_SMP_DATA_TYPE;
>>>>>
>>>>> /**
>>>>> --
>>>>> 2.21.0.windows.1
>>>>>
>>>>>
>>>>>
>
next prev parent reply other threads:[~2019-08-27 12:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <15BE8BCCADEA547C.18314@groups.io>
2019-08-26 18:19 ` [edk2-devel] [PATCH] [edk2-stable201908] MdePkg/BluetoothLeConfig.h: Add type EfiBluetoothSmpPeerAddressList Ni, Ray
2019-08-26 23:56 ` Liming Gao
2019-08-27 0:20 ` Michael D Kinney
2019-08-27 0:45 ` Ni, Ray
2019-08-27 10:18 ` Leif Lindholm
2019-08-27 12:47 ` Laszlo Ersek [this message]
2019-08-27 16:16 ` Ni, Ray
2019-08-26 18:16 Ni, Ray
2019-09-04 0:05 ` [edk2-devel] " Liming Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79924d2c-0185-a71c-ae92-bcad8437e5ce@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox