From: "Tian, Feng" <feng.tian@intel.com>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
"Ni, Ruiyu" <ruiyu.ni@intel.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>,
"Zeng, Star" <star.zeng@intel.com>,
"Gao, Liming" <liming.gao@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Leif Lindholm <leif.lindholm@linaro.org>,
"Tian, Feng" <feng.tian@intel.com>
Subject: Re: [PATCH 0/7] MdeModulePkg ArmVirtPkg: fixes for 64-bit PCI DMA
Date: Tue, 6 Sep 2016 12:41:38 +0000 [thread overview]
Message-ID: <7F1BAD85ADEA444D97065A60D2E97EE566D86EFD@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <CAKv+Gu9bj7+rGzTEB=BWAEFiEp+Y85OefTwknGFb457N10Vs=A@mail.gmail.com>
ATA/USB/NVME/SD are ok to me
Reviewed-by: Feng Tian <feng.tian@Intel.com>
-----Original Message-----
From: Ard Biesheuvel [mailto:ard.biesheuvel@linaro.org]
Sent: Tuesday, September 6, 2016 6:36 PM
To: Ni, Ruiyu <ruiyu.ni@intel.com>
Cc: edk2-devel-01 <edk2-devel@lists.01.org>; Tian, Feng <feng.tian@intel.com>; Zeng, Star <star.zeng@intel.com>; Gao, Liming <liming.gao@intel.com>; Laszlo Ersek <lersek@redhat.com>; Leif Lindholm <leif.lindholm@linaro.org>
Subject: Re: [edk2] [PATCH 0/7] MdeModulePkg ArmVirtPkg: fixes for 64-bit PCI DMA
On 6 September 2016 at 09:54, Ni, Ruiyu <ruiyu.ni@intel.com> wrote:
> Ard,
> The patch to MdeModulePkg/PciHostBridgeDxe is good.
>
> Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
>
Thanks Ray!
Who is responsible for the AtapPassThru, USB, NVME and SDHCI drivers?
>> -----Original Message-----
>> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf
>> Of Ard Biesheuvel
>> Sent: Tuesday, September 6, 2016 3:48 PM
>> To: edk2-devel-01 <edk2-devel@lists.01.org>; Tian, Feng
>> <feng.tian@intel.com>; Zeng, Star <star.zeng@intel.com>; Gao, Liming
>> <liming.gao@intel.com>
>> Cc: Laszlo Ersek <lersek@redhat.com>; Leif Lindholm
>> <leif.lindholm@linaro.org>; Ard Biesheuvel
>> <ard.biesheuvel@linaro.org>
>> Subject: Re: [edk2] [PATCH 0/7] MdeModulePkg ArmVirtPkg: fixes for
>> 64-bit PCI DMA
>>
>> Feng, Star: do you have any feedback on these patches? Thanks.
>>
>> On 5 September 2016 at 10:17, Ard Biesheuvel
>> <ard.biesheuvel@linaro.org>
>> wrote:
>> > After moving ArmVirtQemu to the generic PciHostBridgeDxe, we
>> > noticed that setting DmaAbove4G resulted in problems with the
>> > emulated EHCI USB host controller, which were caused by the fact
>> > that the PCI layer was providing DMA buffers allocated above 4 GB
>> > while the emulated EHCI controller in QEMU does not indicate support for 64-bit addressing.
>> >
>> > As it turns out, the PCI drivers in MdeModulePkg *completely*
>> > ignore the EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute, and
>> > simply
>> assume
>> > that no PCI root bridge driver will produce mappings above 4 GB. On
>> > ARM, this is problematic, since not all platforms have memory below
>> > 4 GB, and so having full support for DMA above 4 GB is indispensable.
>> >
>> > So first, make the various drivers under MdeModulePkg/Pci/Bus set
>> > the EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attributes for devices
>> > that can support 64-bit DMA addressing (patches #1 - #5). Then, we
>> > can update the host bridge driver to actually take these attributes
>> > into account, and only create mappings above 4 GB for devices that
>> > have
>> indicated support for it.
>> >
>> > Finally, in patch #7 we can remove the 4 GB DMA limit from ArmVirtPkg.
>> >
>> > Branch can be found here:
>> > https://git.linaro.org/people/ard.biesheuvel/uefi-next.git/shortlog
>> > /re
>> > fs/heads/pci-64bit-dma-fixes
>> >
>> > Ard Biesheuvel (7):
>> > MdeModulePkg/AtaAtapiPassThru: enable 64-bit PCI DMA
>> > MdeModulePkg/EhciDxe: enable 64-bit PCI DMA
>> > MdeModulePkg/NvmExpressDxe: enable 64-bit PCI DMA
>> > MdeModulePkg/SdMmcPciHcDxe: enable 64-bit PCI DMA
>> > MdeModulePkg/XhciDxe: enable 64-bit PCI DMA
>> > MdeModulePkg/PciHostBridgeDxe: restrict 64-bit DMA to devices that
>> > support it
>> > ArmVirtPkg/FdtPciHostBridgeLib: enable 64-bit PCI DMA
>> >
>> > ArmVirtPkg/Library/FdtPciHostBridgeLib/FdtPciHostBridgeLib.c | 2 +-
>> > MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c | 20
>> +++++++++++++++++-
>> > MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 22
>> +++++++++++++++++++-
>> > MdeModulePkg/Bus/Pci/EhciDxe/Ehci.h | 2 ++
>> > MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +-
>> > MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.c | 13
>> ++++++++++++
>> > MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 14
>> +++++++++----
>> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.c | 20
>> ++++++++++++++++++
>> > MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 22
>> +++++++++++++++++++-
>> > MdeModulePkg/Bus/Pci/XhciDxe/Xhci.h | 2 ++
>> > 10 files changed, 110 insertions(+), 9 deletions(-)
>> >
>> > --
>> > 2.7.4
>> >
>> _______________________________________________
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-09-06 12:41 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-05 9:17 [PATCH 0/7] MdeModulePkg ArmVirtPkg: fixes for 64-bit PCI DMA Ard Biesheuvel
2016-09-05 9:17 ` [PATCH 1/7] MdeModulePkg/AtaAtapiPassThru: enable " Ard Biesheuvel
2016-09-05 9:17 ` [PATCH 2/7] MdeModulePkg/EhciDxe: " Ard Biesheuvel
2016-09-05 12:19 ` Laszlo Ersek
2016-09-05 12:44 ` Ard Biesheuvel
2016-09-05 13:06 ` Laszlo Ersek
2016-09-05 9:17 ` [PATCH 3/7] MdeModulePkg/NvmExpressDxe: " Ard Biesheuvel
2016-09-05 9:17 ` [PATCH 4/7] MdeModulePkg/SdMmcPciHcDxe: " Ard Biesheuvel
2016-09-05 9:17 ` [PATCH 5/7] MdeModulePkg/XhciDxe: " Ard Biesheuvel
2016-09-05 12:14 ` Laszlo Ersek
2016-09-05 9:17 ` [PATCH 6/7] MdeModulePkg/PciHostBridgeDxe: restrict 64-bit DMA to devices that support it Ard Biesheuvel
2016-09-05 12:04 ` Laszlo Ersek
2016-09-05 9:17 ` [PATCH 7/7] ArmVirtPkg/FdtPciHostBridgeLib: enable 64-bit PCI DMA Ard Biesheuvel
2016-09-05 12:04 ` Laszlo Ersek
2016-09-06 7:48 ` [PATCH 0/7] MdeModulePkg ArmVirtPkg: fixes for " Ard Biesheuvel
2016-09-06 8:04 ` Zeng, Star
2016-09-06 8:54 ` Ni, Ruiyu
2016-09-06 10:36 ` Ard Biesheuvel
2016-09-06 12:41 ` Tian, Feng [this message]
2016-09-06 14:48 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7F1BAD85ADEA444D97065A60D2E97EE566D86EFD@SHSMSX101.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox