Re: DisconnectController API not working.

["Tian, Feng" <feng.tian@intel.com>]

Kumar,

Do "map -r" at first please.


PS: for the issue you encounter, are you trying to disconnect the usb controller in use? Please note at this time you are reading the file from usb key. It means the disconnect will never succeed. 

Thanks
Feng

-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Andrew Fish
Sent: Tuesday, April 4, 2017 12:07 AM
To: Amit kumar <akamit91@hotmail.com>
Cc: edk2-devel@lists.01.org
Subject: Re: [edk2] DisconnectController API not working.


> On Apr 3, 2017, at 2:58 AM, Amit kumar <akamit91@hotmail.com> wrote:
> 
> Hi Andrew ,
> 
> I did some testing and found out, same code works fine on Server boards but it fails on desktop boards.
> 

Servers tend to connect less things as it can take a long time. 

> I Have double checked the ControllerHandle by printing its handle index using ConvertHandleToHandleIndex(ControllerHandle), the  ControllerHandle looks correct.
> 
> 
> I have one new query;
> 
> i have made a startup.nsh file in which i am issuing load driver.efi , i am getting file not found.
> 
> i have also tried using load fs0:driver.efi, and again i get  file not found.  I have been trying to run this script from internal shell as well as usb shell.
> 

Does that command work if you boot the shell? 

Thanks,

Andrew Fish

> 
> Regards
> 
> Amit Kumar
> 
> ________________________________
> From: afish@apple.com <afish@apple.com> on behalf of Andrew Fish 
> <afish@apple.com>
> Sent: Friday, March 31, 2017 10:42:08 PM
> To: Amit kumar
> Cc: edk2-devel@lists.01.org
> Subject: Re: [edk2] DisconnectController API not working.
> 
> 
> On Mar 31, 2017, at 5:26 AM, Amit kumar <akamit91@hotmail.com<mailto:akamit91@hotmail.com>> wrote:
> 
> 
> Hi ,
> 
> I am trying to disconnect a controller from the usb mass storage 
> driver, for which i am using
> 
>   Status = gBS->DisconnectController (
>     ControllerHandle,
>     NULL,
>     NULL
>     );
> 
> after the call i get Status = SUCCESS , but when i run drivers command in shell, i find it still being manged by the same old driver handle.
> Although when i run disconnect command from shell (e.g disconnect 163 
> ...output disconnect(163,0,0):Status = SUCCESS) it works as expected and detaches the controller from the driver.
> Can some body point me out what could be the reason.
> 
> Amit,
> 
> It is always good to double check you are using the right ControllerHandle.
> 
> Sequence of events matters. There are boot flows and Shell commands that do ConnectController.
> ~/work/src/edk2/ShellPkg(master)>git grep ConnectController
> Library/UefiShellDebug1CommandsLib/LoadPciRom.c:402:    gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE);
> Library/UefiShellDriver1CommandsLib/Connect.c:54:        Status = gBS->ConnectController (Handle, NULL, RemainingDevicePath, FALSE);
> Library/UefiShellDriver1CommandsLib/Connect.c:95:    gBS->ConnectController (RootBridgeHandleBuffer[RootBridgeIndex], NULL, NULL, FALSE);
> Library/UefiShellDriver1CommandsLib/Connect.c:116:ConnectControllers (
> Library/UefiShellDriver1CommandsLib/Connect.c:150:  // This is where we call the gBS->ConnectController function.
> Library/UefiShellDriver1CommandsLib/Connect.c:158:      Status = gBS->ConnectController(*HandleWalker, DriverHandleList, NULL, Recursive);
> Library/UefiShellDriver1CommandsLib/Connect.c:167:    Status = gBS->ConnectController(ControllerHandle, DriverHandleList, NULL, Recursive);
> Library/UefiShellDriver1CommandsLib/Connect.c:298:                Status = gBS->ConnectController (
> Library/UefiShellDriver1CommandsLib/Connect.c:354:ConvertAndConnectCon
> trollers (
> Library/UefiShellDriver1CommandsLib/Connect.c:391:  return (ConnectControllers(Handle1, Handle2, Recursive, Output, (BOOLEAN)(Handle2 != NULL && Handle1 != NULL)));
> Library/UefiShellDriver1CommandsLib/Connect.c:536:          Status = ConvertAndConnectControllers(Handle1, Handle2, ShellCommandLineGetFlag(Package, L"-r"), (BOOLEAN)(Count!=0));
> Library/UefiShellDriver1CommandsLib/DrvCfg.c:492:  EFI_HANDLE  ConnectControllerContextOverride[2];
> Library/UefiShellDriver1CommandsLib/DrvCfg.c:514:    ConnectControllerContextOverride[0]  = DriverImageHandle;
> Library/UefiShellDriver1CommandsLib/DrvCfg.c:515:    ConnectControllerContextOverride[1]  = NULL;
> Library/UefiShellDriver1CommandsLib/DrvCfg.c:516:    gBS->ConnectController (ControllerHandle, ConnectControllerContextOverride, NULL, TRUE);
> Library/UefiShellLevel2CommandsLib/Load.c:52:    Status = gBS->ConnectController (HandleBuffer[Index], NULL, NULL, TRUE);
> 
> 
> Thanks,
> 
> Andrew Fish
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
> https://lists.01.org/mailman/listinfo/edk2-devel
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel

_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel