From: Ming <ming.huang@linaro.org>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: linaro-uefi@lists.linaro.org, edk2-devel@lists.01.org,
graeme.gregory@linaro.org, ard.biesheuvel@linaro.org,
guoheyi@huawei.com, wanghuiqiang@huawei.com,
huangming23@huawei.com, zhangjinsong2@huawei.com,
huangdaode@hisilicon.com, john.garry@huawei.com,
xinliang.liu@linaro.org, Yan Zhang <zhangyan81@huawei.com>,
Heyi Guo <heyi.guo@linaro.org>
Subject: Re: [PATCH edk2-platforms v1 09/38] Hisilicon/D06: Add Debug Serial Port Init Driver
Date: Wed, 8 Aug 2018 22:48:42 +0800 [thread overview]
Message-ID: <7cd77980-bb59-f164-658c-db50027f9f95@linaro.org> (raw)
In-Reply-To: <20180808100114.z32c5vupmhaopkfc@bivouac.eciton.net>
在 8/8/2018 6:01 PM, Leif Lindholm 写道:
> On Wed, Aug 08, 2018 at 03:37:23PM +0800, Ming wrote:
>>
>>
>> 在 8/3/2018 2:10 AM, Leif Lindholm 写道:
>>> On Tue, Jul 24, 2018 at 03:08:53PM +0800, Ming Huang wrote:
>>>> From: Yan Zhang <zhangyan81@huawei.com>
>>>>
>>>> Debug serial port init driver is added to initilize debug
>>>> serial port.
>>>
>>> What is special about this platform that makes it require a separate
>>> initialization function for the PL011?
>>>
>>
>> We have two physical PL011 serial ports on the board, one for serial port
>> console (described by ACPI SPCR) and the other for standard debug port
>> (described by ACPI DBG2). This driver is to initialize the debug UART,
>> not the serial console.
>
> OK, that makes sense, but was not clear from the commit message.
> Can you add a note about what sort of debug this is used for?
OK
> (Is it just the DEBUG printouts, is it a serial debugger connection, ...)
Yes, it is a serial debugger connection.
>> /
> Leif
>
>> Ming
>>
>>> /
>>> Leif
>>>
>>>> Contributed-under: TianoCore Contribution Agreement 1.1
>>>> Signed-off-by: Yan Zhang <zhangyan81@huawei.com>
>>>> Signed-off-by: Ming Huang <ming.huang@linaro.org>
>>>> Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
>>>> ---
>>>> Platform/Hisilicon/D06/D06.dsc | 1 +
>>>> Platform/Hisilicon/D06/D06.fdf | 1 +
>>>> Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.c | 64 ++++++++++++++++++++
>>>> Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf | 48 +++++++++++++++
>>>> 4 files changed, 114 insertions(+)
>>>>
>>>> diff --git a/Platform/Hisilicon/D06/D06.dsc b/Platform/Hisilicon/D06/D06.dsc
>>>> index f4dfef1087..3f6f1ff20d 100644
>>>> --- a/Platform/Hisilicon/D06/D06.dsc
>>>> +++ b/Platform/Hisilicon/D06/D06.dsc
>>>> @@ -426,6 +426,7 @@
>>>> # Memory test
>>>> #
>>>> MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
>>>> + Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf
>>>> MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
>>>> MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
>>>> MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
>>>> diff --git a/Platform/Hisilicon/D06/D06.fdf b/Platform/Hisilicon/D06/D06.fdf
>>>> index 2730eb42a9..bc016a32ae 100644
>>>> --- a/Platform/Hisilicon/D06/D06.fdf
>>>> +++ b/Platform/Hisilicon/D06/D06.fdf
>>>> @@ -303,6 +303,7 @@ READ_LOCK_STATUS = TRUE
>>>> INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
>>>> INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
>>>>
>>>> + INF Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf
>>>> INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
>>>> #
>>>> # Build Shell from latest source code instead of prebuilt binary
>>>> diff --git a/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.c b/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.c
>>>> new file mode 100644
>>>> index 0000000000..b7233eed21
>>>> --- /dev/null
>>>> +++ b/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.c
>>>> @@ -0,0 +1,64 @@
>>>> +/** @file
>>>> +
>>>> + Copyright (c) 2016 - 2018, Hisilicon Limited. All rights reserved.
>>>> + Copyright (c) 2016 - 2018, Linaro Limited. All rights reserved.
>>>> +
>>>> + This program and the accompanying materials
>>>> + are licensed and made available under the terms and conditions of the BSD License
>>>> + which accompanies this distribution. The full text of the license may be found at
>>>> + http://opensource.org/licenses/bsd-license.php
>>>> +
>>>> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>>>> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>>>> +
>>>> +**/
>>>> +
>>>> +#include <Uefi.h>
>>>> +#include <Library/BaseLib.h>
>>>> +#include <Library/DebugLib.h>
>>>> +#include <Library/PL011UartLib.h>
>>>> +#include <Library/PcdLib.h>
>>>> +#include <Library/SerialPortLib.h>
>>>> +
>>>> +RETURN_STATUS
>>>> +EFIAPI
>>>> +DebugSerialPortInitialize (
>>>> + VOID
>>>> + )
>>>> +{
>>>> + UINT64 BaudRate;
>>>> + UINT32 ReceiveFifoDepth;
>>>> + EFI_PARITY_TYPE Parity;
>>>> + UINT8 DataBits;
>>>> + EFI_STOP_BITS_TYPE StopBits;
>>>> +
>>>> + BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);
>>>> + ReceiveFifoDepth = 0; // Use default FIFO depth
>>>> + Parity = (EFI_PARITY_TYPE)FixedPcdGet8 (PcdUartDefaultParity);
>>>> + DataBits = FixedPcdGet8 (PcdUartDefaultDataBits);
>>>> + StopBits = (EFI_STOP_BITS_TYPE) FixedPcdGet8 (PcdUartDefaultStopBits);
>>>> + return PL011UartInitializePort (
>>>> + (UINTN)FixedPcdGet64 (PcdSerialDbgRegisterBase),
>>>> + FixedPcdGet32 (PL011UartClkInHz),
>>>> + &BaudRate,
>>>> + &ReceiveFifoDepth,
>>>> + &Parity,
>>>> + &DataBits,
>>>> + &StopBits
>>>> + );
>>>> +}
>>>> +
>>>> +EFI_STATUS
>>>> +SerialPortEntry (
>>>> + IN EFI_HANDLE ImageHandle,
>>>> + IN EFI_SYSTEM_TABLE *SystemTable
>>>> + )
>>>> +{
>>>> + EFI_STATUS Status;
>>>> + Status = DebugSerialPortInitialize ();
>>>> + if (EFI_ERROR (Status)) {
>>>> + DEBUG ((DEBUG_ERROR, "CPU1 TB serial port init ERROR: %r\n", Status));
>>>> + }
>>>> + return EFI_SUCCESS;
>>>> +}
>>>> +
>>>> diff --git a/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf b/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf
>>>> new file mode 100644
>>>> index 0000000000..8c91bdf0f4
>>>> --- /dev/null
>>>> +++ b/Silicon/Hisilicon/Hi1620/Drivers/Pl011DebugSerialPortInitDxe/Pl011DebugSerialPortInitDxe.inf
>>>> @@ -0,0 +1,48 @@
>>>> +#/** @file
>>>> +#
>>>> +# Copyright (c) 2016 - 2018, Hisilicon Limited. All rights reserved.
>>>> +# Copyright (c) 2016 - 2018, Linaro Limited. All rights reserved.
>>>> +#
>>>> +# This program and the accompanying materials
>>>> +# are licensed and made available under the terms and conditions of the BSD License
>>>> +# which accompanies this distribution. The full text of the license may be found at
>>>> +# http://opensource.org/licenses/bsd-license.php
>>>> +#
>>>> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
>>>> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>>>> +#
>>>> +#**/
>>>> +
>>>> +[Defines]
>>>> + INF_VERSION = 0x0001001A
>>>> + BASE_NAME = Pl011DebugSerialPortInitDxe
>>>> + FILE_GUID = 16D53E86-7EA4-47bd-861F-511EA9B8ABE0
>>>> + MODULE_TYPE = DXE_DRIVER
>>>> + VERSION_STRING = 1.0
>>>> + ENTRY_POINT = SerialPortEntry
>>>> +
>>>> +[Sources.common]
>>>> + Pl011DebugSerialPortInitDxe.c
>>>> +
>>>> +
>>>> +[Packages]
>>>> + ArmPlatformPkg/ArmPlatformPkg.dec
>>>> + MdeModulePkg/MdeModulePkg.dec
>>>> + MdePkg/MdePkg.dec
>>>> + Silicon/Hisilicon/HisiPkg.dec
>>>> +
>>>> +[LibraryClasses]
>>>> + BaseLib
>>>> + UefiDriverEntryPoint
>>>> +
>>>> +[Pcd]
>>>> + gArmPlatformTokenSpaceGuid.PL011UartClkInHz
>>>> + gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase
>>>> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
>>>> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits
>>>> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity
>>>> + gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits
>>>> +
>>>> +[Depex]
>>>> + TRUE
>>>> +
>>>> --
>>>> 2.17.0
>>>>
next prev parent reply other threads:[~2018-08-08 14:48 UTC|newest]
Thread overview: 153+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 7:08 [PATCH edk2-platforms v1 00/38] Upload for D06 platform Ming Huang
2018-07-24 7:08 ` [PATCH edk2-platforms v1 01/38] Silicon/Hisilicon: Modify the MRC interface for other module Ming Huang
2018-08-02 14:42 ` Leif Lindholm
2018-08-05 3:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 02/38] Silicon/Hisilicon: Separate PlatformArch.h Ming Huang
2018-08-02 14:56 ` Leif Lindholm
2018-08-05 15:11 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 03/38] Hisilicon/D06: Add several basal file for D06 Ming Huang
2018-08-02 16:14 ` Leif Lindholm
2018-08-05 15:06 ` Ming
2018-08-06 3:01 ` Ming
2018-08-06 9:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 04/38] Platform/Hisilicon/D06: Add M41T83RealTimeClockLib Ming Huang
2018-08-02 16:56 ` Leif Lindholm
2018-08-08 8:02 ` Ming
2018-08-08 9:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 05/38] Platform/Hisilicon/D06: Add binary file for D06 Ming Huang
2018-08-02 17:05 ` Leif Lindholm
2018-08-07 15:04 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 06/38] Hisilicon/D06: Add OemMiscLibD06 Ming Huang
2018-08-02 17:22 ` Leif Lindholm
2018-08-08 3:49 ` Ming
2018-08-08 9:43 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 07/38] Silicon/Hisilicon/D06: Wait for all disk ready Ming Huang
2018-08-02 17:36 ` Leif Lindholm
2018-08-08 9:02 ` Ming
2018-08-08 9:59 ` Leif Lindholm
2018-08-08 11:44 ` Ming
2018-08-08 12:53 ` Leif Lindholm
2018-08-10 1:44 ` Ming
2018-08-14 15:26 ` Leif Lindholm
2018-08-15 4:01 ` Ming
2018-08-15 13:12 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 08/38] Silicon/Hisilicon/Acpi: Unify HisiAcipPlatformDxe Ming Huang
2018-08-02 17:39 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 09/38] Hisilicon/D06: Add Debug Serial Port Init Driver Ming Huang
2018-08-02 18:10 ` Leif Lindholm
2018-08-08 7:37 ` Ming
2018-08-08 10:01 ` Leif Lindholm
2018-08-08 14:48 ` Ming [this message]
2018-07-24 7:08 ` [PATCH edk2-platforms v1 10/38] Hisilicon/D06: Add ACPI Tables for D06 Ming Huang
2018-08-02 18:13 ` Leif Lindholm
2018-08-02 18:24 ` Ard Biesheuvel
2018-07-24 7:08 ` [PATCH edk2-platforms v1 11/38] Hisilicon/D06: Add Hi1620OemConfigUiLib Ming Huang
2018-08-03 10:24 ` Leif Lindholm
2018-08-08 12:09 ` Ming
2018-08-11 6:35 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 12/38] Silicon/Hisilicon/D06: Stop watchdog Ming Huang
2018-08-03 10:28 ` Leif Lindholm
2018-08-08 9:49 ` Ming
2018-08-03 10:31 ` Ard Biesheuvel
2018-08-09 11:40 ` Ming
2018-08-09 11:53 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 13/38] Silicon/Hisilicon/Acpi: Move some macro to PlatformArch.h Ming Huang
2018-08-03 10:37 ` Leif Lindholm
2018-08-08 12:22 ` Ming
2018-08-08 12:57 ` Leif Lindholm
2018-07-24 7:08 ` [PATCH edk2-platforms v1 14/38] Silicon/Hisilicon/D06: Fix I2C enable fail issue for D06 Ming Huang
2018-08-03 10:40 ` Leif Lindholm
2018-08-08 14:33 ` Ming
2018-07-24 7:08 ` [PATCH edk2-platforms v1 15/38] Silicon/Hisilicon/I2C: Optimize I2C library Ming Huang
2018-08-03 13:24 ` Leif Lindholm
2018-08-08 14:41 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 16/38] Silicon/Hisilicon/D06: Add I2C delay for HNS auto config Ming Huang
2018-08-03 13:28 ` Leif Lindholm
2018-08-09 3:59 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 17/38] Silicon/Hisilicon/D06: Optimize HNS config CDR post time Ming Huang
2018-08-03 13:30 ` Leif Lindholm
2018-08-08 14:54 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 18/38] Silicon/Hisilicon/Setup: Add Setup Item "EnableGOP" Ming Huang
2018-08-03 13:32 ` Leif Lindholm
2018-08-09 0:35 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 19/38] Hisilicon/Hi1620: Add ACPI PPTT table Ming Huang
2018-08-03 13:42 ` Leif Lindholm
2018-08-09 0:52 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 20/38] Platform/Hisilicon/D06: Enable ACPI PPTT Ming Huang
2018-08-03 13:43 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 21/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-03 13:44 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 22/38] Platform/Hisilicon/D06: Add OemNicLib Ming Huang
2018-08-03 14:36 ` Leif Lindholm
2018-08-09 6:16 ` Ming
2018-08-09 10:19 ` Leif Lindholm
2018-08-09 14:41 ` Ming
2018-08-14 2:38 ` Ming
2018-08-14 15:48 ` Leif Lindholm
2018-08-15 11:08 ` Ming
2018-08-15 13:22 ` Leif Lindholm
2018-08-15 14:16 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 23/38] Hisilicon/D0X: Rename the global variable gDS3231RtcDevice Ming Huang
2018-08-03 15:20 ` Leif Lindholm
2018-08-09 6:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 24/38] Platform/Hisilicon/D06: Add OemNicConfig2P Driver Ming Huang
2018-08-03 15:23 ` Leif Lindholm
2018-08-09 6:24 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 25/38] Hisilicon/D0x: Update SMBIOS type9 info Ming Huang
2018-08-04 9:28 ` Leif Lindholm
2018-08-09 6:34 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 26/38] Silicon/Hisilicon/D0x: Move macro definition to PlatformArch.h Ming Huang
2018-08-04 9:34 ` Leif Lindholm
2018-08-09 6:37 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 27/38] Platform/Hisilicon/D06: Add EarlyConfigPeim peim Ming Huang
2018-08-04 9:59 ` Leif Lindholm
2018-08-09 7:07 ` Ming
2018-08-09 10:27 ` Leif Lindholm
2018-08-09 11:54 ` Ming
2018-08-14 2:31 ` Ming
2018-08-14 15:42 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 28/38] Hisilicon/D0x: Unify FlashFvbDxe driver Ming Huang
2018-08-04 10:06 ` Leif Lindholm
2018-08-09 7:15 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 29/38] Platform/Hisilicon/D06: Add PciHostBridgeLib Ming Huang
2018-08-04 13:41 ` Leif Lindholm
2018-08-09 7:22 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 30/38] Hisilicon/D06: add apei driver Ming Huang
2018-08-04 14:47 ` Leif Lindholm
2018-08-10 2:46 ` Ming
2018-08-14 15:39 ` Leif Lindholm
2018-08-15 8:57 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 31/38] Silicon/Hisilicon/D06: Add some Lpc macro to LpcLib.h Ming Huang
2018-08-04 14:58 ` Leif Lindholm
2018-08-09 12:02 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 32/38] Platform/Hisilicon/D06: Add capsule upgrade support Ming Huang
2018-08-04 15:08 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 33/38] Silicon/Hisilicon/D06: Modify for close slave core clock Ming Huang
2018-08-04 15:14 ` Leif Lindholm
2018-08-09 12:15 ` Ming
2018-08-09 12:27 ` Leif Lindholm
2018-08-10 2:05 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 34/38] Silicon/Hisilicon/D06: Add I2C Bus Exception deal function Ming Huang
2018-08-04 15:18 ` Leif Lindholm
2018-08-10 2:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 35/38] Silicon/Hisilicon/Setup: Support SPCR table switch Ming Huang
2018-08-04 15:20 ` Leif Lindholm
2018-08-09 14:17 ` Ming
2018-08-09 14:44 ` Leif Lindholm
2018-08-09 15:40 ` Ming
2018-08-09 15:48 ` Leif Lindholm
2018-07-24 7:09 ` [PATCH edk2-platforms v1 36/38] Silicon/Hisilicon/setup: Support SMMU switch Ming Huang
2018-08-06 9:59 ` Leif Lindholm
2018-08-09 14:19 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 37/38] Hisilicon/D06: Add PciPlatformLib Ming Huang
2018-08-06 10:01 ` Leif Lindholm
2018-08-09 14:27 ` Ming
2018-07-24 7:09 ` [PATCH edk2-platforms v1 38/38] Platform/Hisilicon/D0x: Update version string to 18.08 Ming Huang
2018-08-06 10:03 ` Leif Lindholm
2018-08-09 14:29 ` Ming
2018-08-01 21:56 ` [PATCH edk2-platforms v1 00/38] Upload for D06 platform Leif Lindholm
2018-08-02 1:46 ` Ming
2018-08-02 3:17 ` 答复: " Guoheyi
2018-08-02 10:12 ` Leif Lindholm
2018-08-02 15:36 ` Graeme Gregory
2018-08-04 14:26 ` Ming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7cd77980-bb59-f164-658c-db50027f9f95@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox