* build failure trying to build gcc cross-compiler
@ 2016-12-12 20:54 Shragai, Yaron
2016-12-12 21:45 ` Bill Paul
2016-12-12 23:04 ` Richardson, Brian
0 siblings, 2 replies; 6+ messages in thread
From: Shragai, Yaron @ 2016-12-12 20:54 UTC (permalink / raw)
To: edk2-devel@lists.01.org
Hello,
I am trying to build the Tianocore source from https://github.com/tianocore/edk2, as per the instructions here: https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions-for-Unix
I am runnin on a Virtualbox VM running Ubuntu Desktop LTS.
I get as far as the "Build gcc x64 UEFI cross compiler" section.
The script mingw-gcc-build.py contains hardcoded references to download binutils and gcc.
In the case of binutils, it references a version that no longer exists in the archive (version 2.20.51.0.5).
In the case of gcc, it references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to other mirror sites, many of which are blocked by my firewall.
I tried getting around this by downloaded the files myself, and commented out the part of the script that downloads the sources (the call to sources.GetAll() - lines 553-558).
I downloaded binutils version 2.24.51.0.2, and gcc vesion 2.24.51.0.2.
It appears that binutils built, but gcc is not building.
Any advice?
Is there an updated version of mingw-gcc-build.py?
Extracting ./src/gcc-4.3.0.tar.bz2:
Extracting ./src/binutils-2.24.51.0.2.tar.bz2:
binutils [config] ... [done]
binutils [build] ... [done]
binutils [install] ... [done]
binutils module is now built and installed
gcc [config] ... [done]
gcc [build] ... [failed!]
Traceback (most recent call last):
File "./mingw-gcc-build.py", line 564, in <module>
App()
File "./mingw-gcc-build.py", line 562, in __init__
Builder(sources, config).Build()
File "./mingw-gcc-build.py", line 426, in Build
self.BuildModule('gcc')
File "./mingw-gcc-build.py", line 473, in BuildModule
self.RunCommand(cmd, module, 'build')
File "./mingw-gcc-build.py", line 511, in RunCommand
'See output log at %s' % self.config.Relative(logFile)
Exception: Failed to build gcc
See output log at ./build/log.txt
Thanks,
Yaron Shragai
yshragai@draper.com
________________________________
Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email.
________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: build failure trying to build gcc cross-compiler 2016-12-12 20:54 build failure trying to build gcc cross-compiler Shragai, Yaron @ 2016-12-12 21:45 ` Bill Paul 2016-12-12 23:04 ` Richardson, Brian 1 sibling, 0 replies; 6+ messages in thread From: Bill Paul @ 2016-12-12 21:45 UTC (permalink / raw) To: edk2-devel; +Cc: Shragai, Yaron, edk2-devel@lists.01.org Of all the gin joints in all the towns in all the world, Shragai, Yaron had to walk into mine at 12:54:53 on Monday 12 December 2016 and say: > Hello, > I am trying to build the Tianocore source from > https://github.com/tianocore/edk2, as per the instructions here: > https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions- > for-Unix > > I am runnin on a Virtualbox VM running Ubuntu Desktop LTS. > > I get as far as the "Build gcc x64 UEFI cross compiler" section. > The script mingw-gcc-build.py contains hardcoded references to download > binutils and gcc. In the case of binutils, it references a version that no > longer exists in the archive (version 2.20.51.0.5). In the case of gcc, it > references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to > other mirror sites, many of which are blocked by my firewall. I tried > getting around this by downloaded the files myself, and commented out the > part of the script that downloads the sources (the call to > sources.GetAll() - lines 553-558). I downloaded binutils version > 2.24.51.0.2, and gcc vesion 2.24.51.0.2. It appears that binutils built, > but gcc is not building. > Any advice? > Is there an updated version of mingw-gcc-build.py? I submitted a patch some time ago to fix the bitrot in cross-compiler toolchain case which updates the script to use GCC 4.9.3, but for reasons that completely baffle me, there is continued resistance to applying it. The preference seems to be to use a native compiler instead. This works if you intend to do an IA32 or X64 build and you have an IA32/X64 host system and saves you the time/trouble of setting up a cross-build toolchain. However I continue to maintain that using a cross-compiler is technically the better solution, especially for OSes other than Windows where the native executable format is not PE/COFF. The patches I created at least make using the cross-compiler build an option again. I uploaded my patches along with the original and modified files here: http://people.freebsd.org/~wpaul/edk2/patch The tools_def.template file needed some updates because the newer version of GCC behaves a little differently than GCC 4.3.0 did with respect to underscore decoration of function names. (GCC 4.3.0 didn't actually implement the convention correctly.) Also, the OVMF build uses a flag to enforce alignment which the newer version of GNU ld doesn't support. (The flags for PE/COFF binaries are different from those for ELF binaries.) Note that while this fixes the script to build a newer version of GCC, that alone may not correct your problem: it's hard to say because you didn't show us the log file containing the actual build error. Building GCC requires libmpfr and libgmp to be present, along with their associated header files. With many Linux distributions, simply installing the library packages is not enough: that just gives you the shared library, but omits the header files that go with it. For those you usually need to install a "devel" package. I have used these patches to successfully build a cross-compile toolchain and OVMF images on my FreeBSD host system. I also have some (now-stale) instructions for how I did the build at: http://people.freebsd.org/~wpaul/edk2/README.txt It's possible the tools_def.template and OVMF build files have changed since I created this patch, so you may have to apply some of the changes manually. They are pretty straightforward though. Standard disclaimers apply. If it breaks, you get to keep both pieces. -Bill > Extracting ./src/gcc-4.3.0.tar.bz2: > Extracting ./src/binutils-2.24.51.0.2.tar.bz2: > binutils [config] ... [done] > binutils [build] ... [done] > binutils [install] ... [done] > binutils module is now built and installed > gcc [config] ... [done] > gcc [build] ... [failed!] > Traceback (most recent call last): > File "./mingw-gcc-build.py", line 564, in <module> > App() > File "./mingw-gcc-build.py", line 562, in __init__ > Builder(sources, config).Build() > File "./mingw-gcc-build.py", line 426, in Build > self.BuildModule('gcc') > File "./mingw-gcc-build.py", line 473, in BuildModule > self.RunCommand(cmd, module, 'build') > File "./mingw-gcc-build.py", line 511, in RunCommand > 'See output log at %s' % self.config.Relative(logFile) > Exception: Failed to build gcc > See output log at ./build/log.txt > > Thanks, > Yaron Shragai > yshragai@draper.com > > ________________________________ > Notice: This email and any attachments may contain proprietary (Draper > non-public) and/or export-controlled information of Draper. If you are not > the intended recipient of this email, please immediately notify the sender > by replying to this email and immediately destroy all copies of this > email. ________________________________ > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel -- ============================================================================= -Bill Paul (510) 749-2329 | Senior Member of Technical Staff, wpaul@windriver.com | Master of Unix-Fu - Wind River Systems ============================================================================= "I put a dollar in a change machine. Nothing changed." - George Carlin ============================================================================= ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failure trying to build gcc cross-compiler 2016-12-12 20:54 build failure trying to build gcc cross-compiler Shragai, Yaron 2016-12-12 21:45 ` Bill Paul @ 2016-12-12 23:04 ` Richardson, Brian 2016-12-12 23:09 ` Shragai, Yaron 1 sibling, 1 reply; 6+ messages in thread From: Richardson, Brian @ 2016-12-12 23:04 UTC (permalink / raw) To: Shragai, Yaron, edk2-devel@lists.01.org The instructions you referenced are intended for non-Linux UNIX systems. Please try these instructions for Ubuntu LTS ... https://github.com/tianocore/tianocore.github.io/wiki/Using-EDK-II-with-Native-GCC I have recently updated these instructions for GCC5 on Ubuntu 16.04 LTS. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 3:55 PM To: edk2-devel@lists.01.org Subject: [edk2] build failure trying to build gcc cross-compiler Hello, I am trying to build the Tianocore source from https://github.com/tianocore/edk2, as per the instructions here: https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions-for-Unix I am runnin on a Virtualbox VM running Ubuntu Desktop LTS. I get as far as the "Build gcc x64 UEFI cross compiler" section. The script mingw-gcc-build.py contains hardcoded references to download binutils and gcc. In the case of binutils, it references a version that no longer exists in the archive (version 2.20.51.0.5). In the case of gcc, it references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to other mirror sites, many of which are blocked by my firewall. I tried getting around this by downloaded the files myself, and commented out the part of the script that downloads the sources (the call to sources.GetAll() - lines 553-558). I downloaded binutils version 2.24.51.0.2, and gcc vesion 2.24.51.0.2. It appears that binutils built, but gcc is not building. Any advice? Is there an updated version of mingw-gcc-build.py? Extracting ./src/gcc-4.3.0.tar.bz2: Extracting ./src/binutils-2.24.51.0.2.tar.bz2: binutils [config] ... [done] binutils [build] ... [done] binutils [install] ... [done] binutils module is now built and installed gcc [config] ... [done] gcc [build] ... [failed!] Traceback (most recent call last): File "./mingw-gcc-build.py", line 564, in <module> App() File "./mingw-gcc-build.py", line 562, in __init__ Builder(sources, config).Build() File "./mingw-gcc-build.py", line 426, in Build self.BuildModule('gcc') File "./mingw-gcc-build.py", line 473, in BuildModule self.RunCommand(cmd, module, 'build') File "./mingw-gcc-build.py", line 511, in RunCommand 'See output log at %s' % self.config.Relative(logFile) Exception: Failed to build gcc See output log at ./build/log.txt Thanks, Yaron Shragai yshragai@draper.com ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failure trying to build gcc cross-compiler 2016-12-12 23:04 ` Richardson, Brian @ 2016-12-12 23:09 ` Shragai, Yaron 2016-12-12 23:29 ` Richardson, Brian 0 siblings, 1 reply; 6+ messages in thread From: Shragai, Yaron @ 2016-12-12 23:09 UTC (permalink / raw) To: edk2-devel@lists.01.org Thanks. Note that the instructions at that link - differentiated by flavor of Linux - all end with a link to the instructions that I referenced ("The remaining instructions are common for most UNIX-like systems"). I did follow the special Ubuntu notes on the page you referenced before going on to the page I referenced. Thanks, Yaron -----Original Message----- From: Richardson, Brian [mailto:brian.richardson@intel.com] Sent: Monday, December 12, 2016 6:05 PM To: Shragai, Yaron <yshragai@draper.com>; edk2-devel@lists.01.org Subject: RE: build failure trying to build gcc cross-compiler The instructions you referenced are intended for non-Linux UNIX systems. Please try these instructions for Ubuntu LTS ... https://github.com/tianocore/tianocore.github.io/wiki/Using-EDK-II-with-Native-GCC I have recently updated these instructions for GCC5 on Ubuntu 16.04 LTS. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 3:55 PM To: edk2-devel@lists.01.org Subject: [edk2] build failure trying to build gcc cross-compiler Hello, I am trying to build the Tianocore source from https://github.com/tianocore/edk2, as per the instructions here: https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions-for-Unix I am runnin on a Virtualbox VM running Ubuntu Desktop LTS. I get as far as the "Build gcc x64 UEFI cross compiler" section. The script mingw-gcc-build.py contains hardcoded references to download binutils and gcc. In the case of binutils, it references a version that no longer exists in the archive (version 2.20.51.0.5). In the case of gcc, it references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to other mirror sites, many of which are blocked by my firewall. I tried getting around this by downloaded the files myself, and commented out the part of the script that downloads the sources (the call to sources.GetAll() - lines 553-558). I downloaded binutils version 2.24.51.0.2, and gcc vesion 2.24.51.0.2. It appears that binutils built, but gcc is not building. Any advice? Is there an updated version of mingw-gcc-build.py? Extracting ./src/gcc-4.3.0.tar.bz2: Extracting ./src/binutils-2.24.51.0.2.tar.bz2: binutils [config] ... [done] binutils [build] ... [done] binutils [install] ... [done] binutils module is now built and installed gcc [config] ... [done] gcc [build] ... [failed!] Traceback (most recent call last): File "./mingw-gcc-build.py", line 564, in <module> App() File "./mingw-gcc-build.py", line 562, in __init__ Builder(sources, config).Build() File "./mingw-gcc-build.py", line 426, in Build self.BuildModule('gcc') File "./mingw-gcc-build.py", line 473, in BuildModule self.RunCommand(cmd, module, 'build') File "./mingw-gcc-build.py", line 511, in RunCommand 'See output log at %s' % self.config.Relative(logFile) Exception: Failed to build gcc See output log at ./build/log.txt Thanks, Yaron Shragai yshragai@draper.com ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failure trying to build gcc cross-compiler 2016-12-12 23:09 ` Shragai, Yaron @ 2016-12-12 23:29 ` Richardson, Brian 2016-12-12 23:34 ` Shragai, Yaron 0 siblings, 1 reply; 6+ messages in thread From: Richardson, Brian @ 2016-12-12 23:29 UTC (permalink / raw) To: Shragai, Yaron, edk2-devel@lists.01.org Actually, you should have ended up here ... https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions The Ubuntu instructions link to 'Common instructions for Linux' (not UNIX). I will make some wiki edits to clarify this. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 6:10 PM To: edk2-devel@lists.01.org Subject: Re: [edk2] build failure trying to build gcc cross-compiler Thanks. Note that the instructions at that link - differentiated by flavor of Linux - all end with a link to the instructions that I referenced ("The remaining instructions are common for most UNIX-like systems"). I did follow the special Ubuntu notes on the page you referenced before going on to the page I referenced. Thanks, Yaron -----Original Message----- From: Richardson, Brian [mailto:brian.richardson@intel.com] Sent: Monday, December 12, 2016 6:05 PM To: Shragai, Yaron <yshragai@draper.com>; edk2-devel@lists.01.org Subject: RE: build failure trying to build gcc cross-compiler The instructions you referenced are intended for non-Linux UNIX systems. Please try these instructions for Ubuntu LTS ... https://github.com/tianocore/tianocore.github.io/wiki/Using-EDK-II-with-Native-GCC I have recently updated these instructions for GCC5 on Ubuntu 16.04 LTS. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 3:55 PM To: edk2-devel@lists.01.org Subject: [edk2] build failure trying to build gcc cross-compiler Hello, I am trying to build the Tianocore source from https://github.com/tianocore/edk2, as per the instructions here: https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions-for-Unix I am runnin on a Virtualbox VM running Ubuntu Desktop LTS. I get as far as the "Build gcc x64 UEFI cross compiler" section. The script mingw-gcc-build.py contains hardcoded references to download binutils and gcc. In the case of binutils, it references a version that no longer exists in the archive (version 2.20.51.0.5). In the case of gcc, it references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to other mirror sites, many of which are blocked by my firewall. I tried getting around this by downloaded the files myself, and commented out the part of the script that downloads the sources (the call to sources.GetAll() - lines 553-558). I downloaded binutils version 2.24.51.0.2, and gcc vesion 2.24.51.0.2. It appears that binutils built, but gcc is not building. Any advice? Is there an updated version of mingw-gcc-build.py? Extracting ./src/gcc-4.3.0.tar.bz2: Extracting ./src/binutils-2.24.51.0.2.tar.bz2: binutils [config] ... [done] binutils [build] ... [done] binutils [install] ... [done] binutils module is now built and installed gcc [config] ... [done] gcc [build] ... [failed!] Traceback (most recent call last): File "./mingw-gcc-build.py", line 564, in <module> App() File "./mingw-gcc-build.py", line 562, in __init__ Builder(sources, config).Build() File "./mingw-gcc-build.py", line 426, in Build self.BuildModule('gcc') File "./mingw-gcc-build.py", line 473, in BuildModule self.RunCommand(cmd, module, 'build') File "./mingw-gcc-build.py", line 511, in RunCommand 'See output log at %s' % self.config.Relative(logFile) Exception: Failed to build gcc See output log at ./build/log.txt Thanks, Yaron Shragai yshragai@draper.com ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failure trying to build gcc cross-compiler 2016-12-12 23:29 ` Richardson, Brian @ 2016-12-12 23:34 ` Shragai, Yaron 0 siblings, 0 replies; 6+ messages in thread From: Shragai, Yaron @ 2016-12-12 23:34 UTC (permalink / raw) To: Richardson, Brian, edk2-devel@lists.01.org You're right, cut-n-paste error, the page I referenced has no instructions on it, I meant to reference the page you did. I got as far as the directions to build a cross compiler, then got stuck as indicated in the OP. Thanks, Yaron -----Original Message----- From: Richardson, Brian [mailto:brian.richardson@intel.com] Sent: Monday, December 12, 2016 6:30 PM To: Shragai, Yaron <yshragai@draper.com>; edk2-devel@lists.01.org Subject: RE: build failure trying to build gcc cross-compiler Actually, you should have ended up here ... https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions The Ubuntu instructions link to 'Common instructions for Linux' (not UNIX). I will make some wiki edits to clarify this. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 6:10 PM To: edk2-devel@lists.01.org Subject: Re: [edk2] build failure trying to build gcc cross-compiler Thanks. Note that the instructions at that link - differentiated by flavor of Linux - all end with a link to the instructions that I referenced ("The remaining instructions are common for most UNIX-like systems"). I did follow the special Ubuntu notes on the page you referenced before going on to the page I referenced. Thanks, Yaron -----Original Message----- From: Richardson, Brian [mailto:brian.richardson@intel.com] Sent: Monday, December 12, 2016 6:05 PM To: Shragai, Yaron <yshragai@draper.com>; edk2-devel@lists.01.org Subject: RE: build failure trying to build gcc cross-compiler The instructions you referenced are intended for non-Linux UNIX systems. Please try these instructions for Ubuntu LTS ... https://github.com/tianocore/tianocore.github.io/wiki/Using-EDK-II-with-Native-GCC I have recently updated these instructions for GCC5 on Ubuntu 16.04 LTS. Thanks ... br --- Brian Richardson, Senior Technical Marketing Engineer, Intel Software brian.richardson@intel.com -- @intel_Brian (Twitter & WeChat) https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson -----Original Message----- From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Shragai, Yaron Sent: Monday, December 12, 2016 3:55 PM To: edk2-devel@lists.01.org Subject: [edk2] build failure trying to build gcc cross-compiler Hello, I am trying to build the Tianocore source from https://github.com/tianocore/edk2, as per the instructions here: https://github.com/tianocore/tianocore.github.io/wiki/Common-instructions-for-Unix I am runnin on a Virtualbox VM running Ubuntu Desktop LTS. I get as far as the "Build gcc x64 UEFI cross compiler" section. The script mingw-gcc-build.py contains hardcoded references to download binutils and gcc. In the case of binutils, it references a version that no longer exists in the archive (version 2.20.51.0.5). In the case of gcc, it references version 4.3.0, on ftpmirror.gnu.org/gcc/, which redirects to other mirror sites, many of which are blocked by my firewall. I tried getting around this by downloaded the files myself, and commented out the part of the script that downloads the sources (the call to sources.GetAll() - lines 553-558). I downloaded binutils version 2.24.51.0.2, and gcc vesion 2.24.51.0.2. It appears that binutils built, but gcc is not building. Any advice? Is there an updated version of mingw-gcc-build.py? Extracting ./src/gcc-4.3.0.tar.bz2: Extracting ./src/binutils-2.24.51.0.2.tar.bz2: binutils [config] ... [done] binutils [build] ... [done] binutils [install] ... [done] binutils module is now built and installed gcc [config] ... [done] gcc [build] ... [failed!] Traceback (most recent call last): File "./mingw-gcc-build.py", line 564, in <module> App() File "./mingw-gcc-build.py", line 562, in __init__ Builder(sources, config).Build() File "./mingw-gcc-build.py", line 426, in Build self.BuildModule('gcc') File "./mingw-gcc-build.py", line 473, in BuildModule self.RunCommand(cmd, module, 'build') File "./mingw-gcc-build.py", line 511, in RunCommand 'See output log at %s' % self.config.Relative(logFile) Exception: Failed to build gcc See output log at ./build/log.txt Thanks, Yaron Shragai yshragai@draper.com ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel ________________________________ Notice: This email and any attachments may contain proprietary (Draper non-public) and/or export-controlled information of Draper. If you are not the intended recipient of this email, please immediately notify the sender by replying to this email and immediately destroy all copies of this email. ________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-12-12 23:34 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-12-12 20:54 build failure trying to build gcc cross-compiler Shragai, Yaron 2016-12-12 21:45 ` Bill Paul 2016-12-12 23:04 ` Richardson, Brian 2016-12-12 23:09 ` Shragai, Yaron 2016-12-12 23:29 ` Richardson, Brian 2016-12-12 23:34 ` Shragai, Yaron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox