From: Paulo Alcantara <paulo@paulo.ac>
To: "Yao\, Jiewen" <jiewen.yao@intel.com>,
"edk2-devel\@lists.01.org" <edk2-devel@lists.01.org>
Cc: Laszlo Ersek <lersek@redhat.com>, "Dong\, Eric" <eric.dong@intel.com>
Subject: Re: [RFC v4 4/6] UefiCpuPkg/CpuExceptionHandlerLib: Add helper to valid memory addresses
Date: Thu, 04 Jan 2018 11:18:35 -0200 [thread overview]
Message-ID: <87bmi9sqxg.fsf@paulo.ac> (raw)
In-Reply-To: <74D8A39837DF1E4DA445A8C0B3885C503AA6F95E@shsmsx102.ccr.corp.intel.com>
"Yao, Jiewen" <jiewen.yao@intel.com> writes:
Hi Jiewen,
> Some suggestion:
>
> 1) I am not sure if it is proper to use ASSERT in an exception handler, because we know something is wrong.
>
> ASSERT ((PhysicalAddress & (sizeof (*Pml4TableEntry) - 1)) == 0);
>
> I suggest we just do the check, and return FALSE, if the prerequisite is not satisfied.
OK.
>
> 2) Can we use meaningful definition for BIT0, BIT7?
>
> if ((*Pml4TableEntry & BIT0) == 0) {
> if ((*PageDirPtrTableEntry & BIT7) != 0) {
Sure. Sorry for missing that.
>
> 3) I am not sure if I understand below code.
>
> PhysicalAddress = (UINT64)Cr3 & (((1ULL << MaxPhyAddrBits) - 1) << 12);
> PhysicalAddress = *Pml4TableEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
> PhysicalAddress = *PageDirPtrTableEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
> PhysicalAddress = *PageDirEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
>
> If MaxPhyAddrBits is 48, you will get "Cr3 & 0x0FFFFFFFFFFFF000". Is that what you want? I think we need "Cr3 & 0x0000FFFFFFFFF000"
> Should it be: PhysicalAddress = (UINT64)Cr3 & ((1ULL << MaxPhyAddrBits) - 1) & (~0xFFF);
Yes, it should. I've just re-checked the Intel SDM Vol 3A and your
calculation is correct. Thanks! I'll fix that up in next series.
>
> 4) Can we use a more readable way to below? Personally, I do not suggest "<< 3", which is just the index calculation.
>
> PhysicalAddress = (UINT64)Cr3 & (((1ULL << MaxPhyAddrBits) - 1) << 12);
> PhysicalAddress |= (((UINT64)LinearAddress >> 39) & 0x1FF) << 3;
> Pml4TableEntry = (UINT64 *)(UINTN)PhysicalAddress;
> PhysicalAddress = *Pml4TableEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
>
> For example:
> PhysicalAddress = (UINT64)Cr3 & ((1ULL << MaxPhyAddrBits) - 1) & (~0xFFF);
> Pml4TableEntry = (UINT64 *)(UINTN)PhysicalAddress;
> Index= (UINTN)(((UINT64)LinearAddress >> 39) & 0x1FF);
> PhysicalAddress = Pml4TableEntry[Index] & ((1ULL << MaxPhyAddrBits) - 1) & (~0xFFF);
Sure. This way is much clearer, indeed.
Thank you very much for the effort on reviewing this!
Paulo
>> -----Original Message-----
>> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Paulo
>> Alcantara
>> Sent: Friday, December 29, 2017 12:40 PM
>> To: edk2-devel@lists.01.org
>> Cc: Laszlo Ersek <lersek@redhat.com>; Dong, Eric <eric.dong@intel.com>
>> Subject: [edk2] [RFC v4 4/6] UefiCpuPkg/CpuExceptionHandlerLib: Add helper to
>> valid memory addresses
>>
>> Introduce IsLinearAddressValid() function that will be used for
>> validating memory addresses that would get dereferenced during stack
>> traces in IA32 and X64 CPU exceptions.
>>
>> Contributed-under: TianoCore Contribution Agreement 1.1
>> Cc: Eric Dong <eric.dong@intel.com>
>> Cc: Laszlo Ersek <lersek@redhat.com>
>> Requested-by: Brian Johnson <brian.johnson@hpe.com>
>> Requested-by: Jiewen Yao <jiewen.yao@intel.com>
>> Signed-off-by: Paulo Alcantara <paulo@paulo.ac>
>> ---
>> UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c | 382
>> ++++++++++++++++++++
>> UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h | 16 +
>> 2 files changed, 398 insertions(+)
>>
>> diff --git
>> a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
>> b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
>> index 867c5c01d6..52b3eb1463 100644
>> --- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
>> +++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
>> @@ -14,6 +14,9 @@
>>
>> #include "CpuExceptionCommon.h"
>>
>> +#include <Register/Msr.h>
>> +#include <Library/DebugLib.h>
>> +
>> //
>> // Error code flag indicating whether or not an error code will be
>> // pushed on the stack if an exception occurs.
>> @@ -194,3 +197,382 @@ GetPdbFileName (
>> }
>> }
>> }
>> +
>> +/**
>> + Check if a linear address is valid by walking the page tables in 4-level
>> + paging mode.
>> +
>> + @param[in] Cr3 CR3 control register.
>> + @param[in] MaxPhyAddrBits MAXPHYADDRBITS bits.
>> + @param[in] LinearAddress Linear address to be checked.
>> +**/
>> +STATIC
>> +BOOLEAN
>> +Do4LevelPagingModeCheck (
>> + IN UINTN Cr3,
>> + IN UINT8 MaxPhyAddrBits,
>> + IN UINTN LinearAddress
>> + )
>> +{
>> + UINT64 PhysicalAddress;
>> + UINT64 *Pml4TableEntry;
>> + UINT64 *PageDirPtrTableEntry;
>> + UINT64 *PageDirEntry;
>> + UINT64 *PageTableEntry;
>> +
>> + //
>> + // In 4-level paging mode, linear addresses are 48 bits wide
>> + //
>> + if ((UINT64)LinearAddress > (1ULL << 48) - 1) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PML4E
>> + //
>> + PhysicalAddress = (UINT64)Cr3 & (((1ULL << MaxPhyAddrBits) - 1) << 12);
>> + PhysicalAddress |= (((UINT64)LinearAddress >> 39) & 0x1FF) << 3;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*Pml4TableEntry) - 1)) == 0);
>> +
>> + Pml4TableEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check if a PDPTE is present
>> + //
>> + if ((*Pml4TableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PDPTE
>> + //
>> + PhysicalAddress = *Pml4TableEntry & (((1ULL << MaxPhyAddrBits) - 1) <<
>> 12);
>> + PhysicalAddress |= (((UINT64)LinearAddress >> 30) & 0x1FF) << 3;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*PageDirPtrTableEntry) - 1)) == 0);
>> +
>> + PageDirPtrTableEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check whether a PDPTE or 1GiB page entry is present
>> + //
>> + if ((*PageDirPtrTableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Check if PDPTE maps an 1GiB page
>> + //
>> + if ((*PageDirPtrTableEntry & BIT7) != 0) {
>> + return TRUE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PDE
>> + //
>> + PhysicalAddress = *PageDirPtrTableEntry & (((1ULL << MaxPhyAddrBits) - 1)
>> <<
>> + 12);
>> + PhysicalAddress |= (((UINT64)LinearAddress >> 21) & 0x1FF) << 3;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*PageDirEntry) - 1)) == 0);
>> +
>> + PageDirEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check whether a PDE or a 2MiB page entry is present
>> + //
>> + if ((*PageDirEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Check if PDE maps a 2MiB page
>> + //
>> + if ((*PageDirEntry & BIT7) != 0) {
>> + return TRUE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PTE
>> + //
>> + PhysicalAddress = *PageDirEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
>> + PhysicalAddress |= (((UINT64)LinearAddress >> 12) & 0x1FF) << 3;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*PageTableEntry) - 1)) == 0);
>> +
>> + PageTableEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check if PTE maps a 4KiB page
>> + //
>> + if ((*PageTableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + return TRUE;
>> +}
>> +
>> +/**
>> + Check if a linear address is valid by walking the page tables in 32-bit paging
>> + mode.
>> +
>> + @param[in] Cr3 CR3 control register.
>> + @param[in] Cr4 CR4 control register.
>> + @param[in] LinearAddress Linear address to be checked.
>> +**/
>> +STATIC
>> +BOOLEAN
>> +Do32BitPagingModeCheck (
>> + IN UINTN Cr3,
>> + IN UINTN Cr4,
>> + IN UINTN LinearAddress
>> + )
>> +{
>> + UINT64 PhysicalAddress;
>> + UINT32 *PageDirEntry;
>> + UINT32 *PageTableEntry;
>> +
>> + if (LinearAddress > MAX_UINT32) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PDE
>> + //
>> + PhysicalAddress = (UINT32)Cr3 & (((1ULL << 20) - 1) << 12);
>> + PhysicalAddress |= (((UINT32)LinearAddress >> 22) & 0x3FF) << 2;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*PageDirEntry) - 1)) == 0);
>> +
>> + PageDirEntry = (UINT32 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check whether a PTE or a 4MiB page is present
>> + //
>> + if ((*PageDirEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Check if PDE maps a 4MiB page
>> + //
>> + if ((Cr4 & BIT4) != 0 && (*PageDirEntry & BIT7) != 0) {
>> + return TRUE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PTE
>> + //
>> + PhysicalAddress = *PageDirEntry & (((1ULL << 20) - 1) << 12);
>> + PhysicalAddress |= (((UINT32)LinearAddress >> 12) & 0x3FF) << 2;
>> +
>> + ASSERT ((PhysicalAddress & (sizeof (*PageTableEntry) - 1)) == 0);
>> +
>> + PageTableEntry = (UINT32 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check if PTE maps a 4KiB page
>> + //
>> + if ((*PageTableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + return TRUE;
>> +}
>> +
>> +/**
>> + Check if a linear address is valid by walking the page tables in PAE paging
>> + mode.
>> +
>> + @param[in] Cr3 CR3 control register.
>> + @param[in] MaxPhyAddrBits MAXPHYADDRBITS bits.
>> + @param[in] LinearAddress Linear address to be checked.
>> +**/
>> +STATIC
>> +BOOLEAN
>> +DoPAEPagingModeCheck (
>> + IN UINTN Cr3,
>> + IN UINT8 MaxPhyAddrBits,
>> + IN UINTN LinearAddress
>> + )
>> +{
>> + UINT64 PhysicalAddress;
>> + UINT64 *PageDirPtrTableEntry;
>> + UINT64 *PageDirEntry;
>> + UINT64 *PageTableEntry;
>> +
>> + if (LinearAddress > MAX_UINT32) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PDPTE
>> + //
>> + PhysicalAddress = (UINT32)Cr3 >> 5;
>> +
>> + //
>> + // Select PDPTE register
>> + //
>> + PhysicalAddress +=
>> + ((UINT32)LinearAddress >> 30) * sizeof (*PageDirPtrTableEntry);
>> +
>> + PageDirPtrTableEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check if PDE is present
>> + //
>> + if ((*PageDirPtrTableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + PhysicalAddress = *PageDirPtrTableEntry & (((1ULL << MaxPhyAddrBits) - 1)
>> <<
>> + 12);
>> + PhysicalAddress |= ((LinearAddress >> 21) & 0x1FF) << 3;
>> + ASSERT ((PhysicalAddress & (sizeof (*PageDirEntry) - 1)) == 0);
>> +
>> + PageDirEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check whether a PTE or a 2MiB page is present
>> + //
>> + if ((*PageDirEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Check if PDE maps a 2MiB page
>> + //
>> + if ((*PageDirEntry & BIT7) != 0) {
>> + return TRUE;
>> + }
>> +
>> + //
>> + // Calculate physical address of PTE
>> + //
>> + PhysicalAddress = *PageDirEntry & (((1ULL << MaxPhyAddrBits) - 1) << 12);
>> + PhysicalAddress |= ((LinearAddress >> 12) & 0x1FF) << 3;
>> + ASSERT ((PhysicalAddress & (sizeof (*PageTableEntry) - 1)) == 0);
>> +
>> + PageTableEntry = (UINT64 *)(UINTN)PhysicalAddress;
>> +
>> + //
>> + // Check if PTE maps a 4KiB page
>> + //
>> + if ((*PageTableEntry & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + return TRUE;
>> +}
>> +
>> +/**
>> + Check if a linear address is valid.
>> +
>> + @param[in] Cr0 CR0 control register.
>> + @param[in] Cr3 CR3 control register.
>> + @param[in] Cr4 CR4 control register.
>> + @param[in] LinearAddress Linear address to be checked.
>> +**/
>> +BOOLEAN
>> +IsLinearAddressValid (
>> + IN UINTN Cr0,
>> + IN UINTN Cr3,
>> + IN UINTN Cr4,
>> + IN UINTN LinearAddress
>> + )
>> +{
>> + UINT32 Eax;
>> + UINT32 Edx;
>> + UINT8 MaxPhyAddrBits;
>> + MSR_IA32_EFER_REGISTER Msr;
>> + BOOLEAN AddressValid;
>> +
>> + //
>> + // Check for valid input parameters
>> + //
>> + if (Cr0 == 0 || Cr4 == 0 || LinearAddress == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Check if paging is disabled
>> + //
>> + if ((Cr0 & BIT31) == 0) {
>> + //
>> + // If CR4.PAE bit is set, then the linear (or physical) address supports
>> + // only up to 36 bits.
>> + //
>> + if (((Cr4 & BIT5) != 0 && (UINT64)LinearAddress > 0xFFFFFFFFFULL) ||
>> + LinearAddress > 0xFFFFFFFF) {
>> + return FALSE;
>> + }
>> +
>> + return TRUE;
>> + }
>> +
>> + //
>> + // Paging can be enabled only if CR0.PE bit is set
>> + //
>> + if ((Cr0 & BIT0) == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // CR3 register cannot be zero if paging is enabled
>> + //
>> + if (Cr3 == 0) {
>> + return FALSE;
>> + }
>> +
>> + //
>> + // Get MAXPHYADDR bits
>> + //
>> + AsmCpuid (0x80000000, &Eax, NULL, NULL, NULL);
>> + if (Eax >= 0x80000008) {
>> + AsmCpuid (0x80000008, &Eax, NULL, NULL, NULL);
>> + MaxPhyAddrBits = (UINT8)Eax;
>> + } else {
>> + AsmCpuid (1, NULL, NULL, NULL, &Edx);
>> + if ((Edx & BIT6) != 0) {
>> + MaxPhyAddrBits = 36;
>> + } else {
>> + MaxPhyAddrBits = 32;
>> + }
>> + }
>> +
>> + ASSERT (MaxPhyAddrBits > 0);
>> +
>> + AddressValid = FALSE;
>> +
>> + //
>> + // check if CR4.PAE bit is not set
>> + //
>> + if ((Cr4 & BIT5) == 0) {
>> + //
>> + // Check if linear address is valid in 32-bit paging mode
>> + //
>> + AddressValid = Do32BitPagingModeCheck (Cr3, Cr4, LinearAddress);
>> + } else {
>> + if (MaxPhyAddrBits > 52) {
>> + return FALSE;
>> + }
>> +
>> + Msr.Uint64 = AsmReadMsr64 (MSR_IA32_EFER);
>> +
>> + if (Msr.Bits.LME == 0) {
>> + //
>> + // Check if linear address is valid in PAE paging mode
>> + //
>> + AddressValid = DoPAEPagingModeCheck (Cr3, MaxPhyAddrBits,
>> LinearAddress);
>> + } else {
>> + //
>> + // Check if linear address is valid in 4-level paging mode
>> + //
>> + AddressValid = Do4LevelPagingModeCheck (Cr3, MaxPhyAddrBits,
>> + LinearAddress);
>> + }
>> + }
>> +
>> + return AddressValid;
>> +}
>> diff --git
>> a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
>> b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
>> index ec46c2d9d3..1b51034c25 100644
>> --- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
>> +++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
>> @@ -330,5 +330,21 @@ GetPdbFileName (
>> OUT CHAR8 **PdbFileName
>> );
>>
>> +/**
>> + Check if a linear address is valid.
>> +
>> + @param[in] Cr0 CR0 control register.
>> + @param[in] Cr3 CR3 control register.
>> + @param[in] Cr4 CR4 control register.
>> + @param[in] LinearAddress Linear address to be checked.
>> +**/
>> +BOOLEAN
>> +IsLinearAddressValid (
>> + IN UINTN Cr0,
>> + IN UINTN Cr3,
>> + IN UINTN Cr4,
>> + IN UINTN LinearAddress
>> + );
>> +
>> #endif
>>
>> --
>> 2.14.3
>>
>> _______________________________________________
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-01-04 13:15 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-14 12:47 [RFC 0/1] Stack trace support in X64 exception handling Paulo Alcantara
2017-11-14 12:47 ` [RFC 1/1] UefiCpuPkg/CpuExceptionHandlerLib/X64: Add stack trace support Paulo Alcantara
2017-11-14 14:01 ` Andrew Fish
2017-11-14 14:26 ` 答复: " Fan Jeff
2017-11-14 14:38 ` Andrew Fish
2017-11-14 15:30 ` Paulo Alcantara
2017-11-14 16:51 ` Brian J. Johnson
2017-12-29 3:48 ` [RFC v4 0/6] Stack trace support in X64 exception handling Paulo Alcantara
2017-12-29 4:39 ` [RFC v4 1/6] UefiCpuPkg/CpuExceptionHandlerLib/X64: Add stack trace support Paulo Alcantara
2018-01-03 8:53 ` 答复: " Fan Jeff
2018-01-03 14:51 ` Paulo Alcantara
2017-12-29 4:39 ` [RFC v4 2/6] UefiCpuPkg/CpuExceptionHandlerLib: Export GetPdbFileName() Paulo Alcantara
2017-12-29 4:39 ` [RFC v4 3/6] UefiCpuPkg/CpuExceptionHandlerLib/Ia32: Add stack trace support Paulo Alcantara
2017-12-29 4:39 ` [RFC v4 4/6] UefiCpuPkg/CpuExceptionHandlerLib: Add helper to valid memory addresses Paulo Alcantara
2018-01-03 8:42 ` 答复: " Fan Jeff
2018-01-03 14:45 ` Paulo Alcantara
2018-01-03 16:59 ` Brian J. Johnson
2018-01-04 13:03 ` Paulo Alcantara
2018-01-04 1:36 ` Yao, Jiewen
2018-01-04 1:58 ` Yao, Jiewen
2018-01-04 13:29 ` Paulo Alcantara
2018-01-04 14:35 ` Yao, Jiewen
2018-01-04 15:15 ` Paulo Alcantara
2018-01-04 13:18 ` Paulo Alcantara [this message]
2017-12-29 4:39 ` [RFC v4 5/6] UefiCpuPkg/CpuExceptionHandlerLib: Ensure valid frame/stack pointers Paulo Alcantara
2018-01-03 8:45 ` 答复: " Fan Jeff
2018-01-03 14:48 ` Paulo Alcantara
2018-01-04 1:07 ` Yao, Jiewen
2017-12-29 4:39 ` [RFC v4 6/6] UefiCpuPkg/CpuExceptionHandlerLib: Correctly print IP addresses Paulo Alcantara
2018-01-03 8:46 ` 答复: " Fan Jeff
2018-01-04 0:59 ` [RFC v4 0/6] Stack trace support in X64 exception handling Yao, Jiewen
2018-01-04 13:36 ` Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 0/8] " Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 1/8] UefiCpuPkg/CpuExceptionHandlerLib/X64: Add stack trace support Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 2/8] UefiCpuPkg/CpuExceptionHandlerLib: Export GetPdbFileName() Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 3/8] UefiCpuPkg/CpuExceptionHandlerLib/Ia32: Add stack trace support Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 4/8] UefiCpuPkg/CpuExceptionHandlerLib: Add helper to validate memory addresses Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 5/8] UefiCpuPkg/CpuExceptionHandlerLib: Ensure valid frame/stack pointers Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 6/8] UefiCpuPkg/CpuExceptionHandlerLib: Correctly print IP addresses Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 7/8] UefiCpuPkg/CpuExceptionHandlerLib: Validate memory address ranges Paulo Alcantara
2018-01-15 0:23 ` [RFC v5 8/8] UefiCpuPkg/CpuExceptionHandlerLib: Add early check in DumpStackContents Paulo Alcantara
2018-01-17 12:57 ` [RFC v5 0/8] Stack trace support in X64 exception handling Yao, Jiewen
2018-01-17 22:48 ` Yao, Jiewen
2018-01-19 0:09 ` Paulo Alcantara
2018-01-19 0:02 ` Paulo Alcantara
2018-01-19 0:15 ` Paulo Alcantara
2018-01-29 13:38 ` Paulo Alcantara
2018-01-31 5:56 ` Yao, Jiewen
2018-01-31 19:05 ` Paulo Alcantara
2017-11-14 13:21 ` [RFC 0/1] " Paulo Alcantara
2017-11-14 14:03 ` 答复: " Fan Jeff
2017-11-14 14:12 ` 答复: " Fan Jeff
2017-11-14 15:37 ` Paulo Alcantara
2017-11-14 16:33 ` Brian J. Johnson
2017-11-14 17:23 ` Andrew Fish
2017-11-14 17:41 ` Brian J. Johnson
2017-11-14 17:56 ` Paulo Alcantara
2017-11-15 13:21 ` 答复: 答复: " Fan Jeff
2017-11-15 14:41 ` Paulo Alcantara
2017-11-15 14:52 ` 答复: " Fan Jeff
2017-11-16 1:18 ` [RFC v2 0/3] " Paulo Alcantara
2017-11-16 1:18 ` [RFC v2 1/3] UefiCpuPkg/CpuExceptionHandlerLib/X64: Add stack trace support Paulo Alcantara
2017-11-16 1:57 ` Yao, Jiewen
2017-11-16 22:13 ` Paulo Alcantara
2017-11-17 3:43 ` Yao, Jiewen
2017-11-20 14:51 ` Paulo Alcantara
2017-11-16 15:43 ` Brian J. Johnson
2017-11-16 22:19 ` Paulo Alcantara
2017-11-16 1:18 ` [RFC v2 2/3] UefiCpuPkg/CpuExceptionHandlerLib: Export GetPdbFileName() Paulo Alcantara
2017-11-16 1:18 ` [RFC v2 3/3] UefiCpuPkg/CpuExceptionHandlerLib/Ia32: Add stack trace support Paulo Alcantara
2017-11-16 1:46 ` [RFC v2 0/3] Stack trace support in X64 exception handling Paulo Alcantara
2017-11-16 5:01 ` Andrew Fish
2017-11-16 22:02 ` Paulo Alcantara
2017-11-16 21:56 ` [RFC v3 " Paulo Alcantara
2017-11-16 21:56 ` [RFC v3 1/3] UefiCpuPkg/CpuExceptionHandlerLib/X64: Add stack trace support Paulo Alcantara
2017-11-17 7:24 ` 答复: " Fan Jeff
2017-11-20 14:59 ` Paulo Alcantara
2017-11-23 14:27 ` 答复: " Fan Jeff
2017-11-23 18:34 ` Andrew Fish
2017-11-23 19:49 ` Fan Jeff
2017-11-16 21:56 ` [RFC v3 2/3] UefiCpuPkg/CpuExceptionHandlerLib: Export GetPdbFileName() Paulo Alcantara
2017-11-16 21:56 ` [RFC v3 3/3] UefiCpuPkg/CpuExceptionHandlerLib/Ia32: Add stack trace support Paulo Alcantara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bmi9sqxg.fsf@paulo.ac \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox