From: "Wu, Jiaxin" <jiaxin.wu@intel.com>
To: Laszlo Ersek <lersek@redhat.com>,
"edk2-devel@ml01.01.org" <edk2-devel@ml01.01.org>
Cc: "Ni, Ruiyu" <ruiyu.ni@intel.com>, "Ye, Ting" <ting.ye@intel.com>,
"Justen, Jordan L" <jordan.l.justen@intel.com>,
Gary Lin <glin@suse.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>,
"Fu, Siyuan" <siyuan.fu@intel.com>
Subject: Re: [PATCH 3/3] OvmfPkg: Allow HTTP connections if HTTP Boot enabled
Date: Fri, 20 Jan 2017 00:54:09 +0000 [thread overview]
Message-ID: <895558F6EA4E3B41AC93A00D163B72741629638B@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <23d6bd7a-84b5-dc7a-d830-2673d1d5d781@redhat.com>
Thanks Laszlo, I will refine it before commit the patches.
Best Regards!
Jiaxin
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Laszlo
> Ersek
> Sent: Thursday, January 19, 2017 4:33 PM
> To: Wu, Jiaxin <jiaxin.wu@intel.com>; edk2-devel@ml01.01.org
> Cc: Ni, Ruiyu <ruiyu.ni@intel.com>; Ye, Ting <ting.ye@intel.com>; Justen,
> Jordan L <jordan.l.justen@intel.com>; Gary Lin <glin@suse.com>; Kinney,
> Michael D <michael.d.kinney@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>
> Subject: Re: [edk2] [PATCH 3/3] OvmfPkg: Allow HTTP connections if HTTP Boot
> enabled
>
> Jiaxin,
>
> On 01/19/17 06:18, Jiaxin Wu wrote:
> > Overwrite the value of PcdAllowHttpConnections to allow HTTP
> > connections if HTTP Boot enabled (-D HTTP_BOOT_ENABLE).
> >
> > Cc: Laszlo Ersek <lersek@redhat.com>
> > Cc: Justen Jordan L <jordan.l.justen@intel.com>
> > Cc: Gary Lin <glin@suse.com>
> > Cc: Ye Ting <ting.ye@intel.com>
> > Cc: Fu Siyuan <siyuan.fu@intel.com>
> > Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> > Cc: Kinney Michael D <michael.d.kinney@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.0
> > Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> > ---
> > OvmfPkg/OvmfPkgIa32.dsc | 6 +++++-
> > OvmfPkg/OvmfPkgIa32X64.dsc | 6 +++++-
> > OvmfPkg/OvmfPkgX64.dsc | 6 +++++-
> > 3 files changed, 15 insertions(+), 3 deletions(-)
> >
> > diff --git a/OvmfPkg/OvmfPkgIa32.dsc b/OvmfPkg/OvmfPkgIa32.dsc
> > index e060602..2c38578 100644
> > --- a/OvmfPkg/OvmfPkgIa32.dsc
> > +++ b/OvmfPkg/OvmfPkgIa32.dsc
> > @@ -1,9 +1,9 @@
> > ## @file
> > # EFI/Framework Open Virtual Machine Firmware (OVMF) platform
> > #
> > -# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
> > +# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
> > # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> > #
> > # This program and the accompanying materials
> > # are licensed and made available under the terms and conditions of the
> BSD License
> > # which accompanies this distribution. The full text of the license may be
> found at
> > @@ -394,10 +394,14 @@
> >
> > gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0
> >
> > gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
> >
> > + !if $(HTTP_BOOT_ENABLE) == TRUE
> > + gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections|TRUE
> > + !endif
> > +
> > # DEBUG_INIT 0x00000001 // Initialization
> > # DEBUG_WARN 0x00000002 // Warnings
> > # DEBUG_LOAD 0x00000004 // Load events
> > # DEBUG_FS 0x00000008 // EFI File system
> > # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
> > diff --git a/OvmfPkg/OvmfPkgIa32X64.dsc b/OvmfPkg/OvmfPkgIa32X64.dsc
> > index 0e24e7a..2760533 100644
> > --- a/OvmfPkg/OvmfPkgIa32X64.dsc
> > +++ b/OvmfPkg/OvmfPkgIa32X64.dsc
> > @@ -1,9 +1,9 @@
> > ## @file
> > # EFI/Framework Open Virtual Machine Firmware (OVMF) platform
> > #
> > -# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
> > +# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
> > # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> > #
> > # This program and the accompanying materials
> > # are licensed and made available under the terms and conditions of the
> BSD License
> > # which accompanies this distribution. The full text of the license may be
> found at
> > @@ -440,10 +440,14 @@
> > !ifdef $(SOURCE_DEBUG_ENABLE)
> >
> gEfiSourceLevelDebugPkgTokenSpaceGuid.PcdDebugLoadImageMethod|0x2
> > !endif
> >
> > [PcdsFixedAtBuild.X64]
> > +!if $(HTTP_BOOT_ENABLE) == TRUE
> > + gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections|TRUE
> > +!endif
> > +
> > !ifndef $(USE_OLD_SHELL)
> > gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5,
> 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4,
> 0xD1 }
> > !endif
> >
> > !if $(SMM_REQUIRE) == TRUE
> > diff --git a/OvmfPkg/OvmfPkgX64.dsc b/OvmfPkg/OvmfPkgX64.dsc
> > index 108f7d5..56fddc3 100644
> > --- a/OvmfPkg/OvmfPkgX64.dsc
> > +++ b/OvmfPkg/OvmfPkgX64.dsc
> > @@ -1,9 +1,9 @@
> > ## @file
> > # EFI/Framework Open Virtual Machine Firmware (OVMF) platform
> > #
> > -# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
> > +# Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
> > # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
> > #
> > # This program and the accompanying materials
> > # are licensed and made available under the terms and conditions of the
> BSD License
> > # which accompanies this distribution. The full text of the license may be
> found at
> > @@ -399,10 +399,14 @@
> >
> > gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0
> >
> > gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
> >
> > + !if $(HTTP_BOOT_ENABLE) == TRUE
> > + gEfiNetworkPkgTokenSpaceGuid.PcdAllowHttpConnections|TRUE
> > + !endif
> > +
> > # DEBUG_INIT 0x00000001 // Initialization
> > # DEBUG_WARN 0x00000002 // Warnings
> > # DEBUG_LOAD 0x00000004 // Load events
> > # DEBUG_FS 0x00000008 // EFI File system
> > # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
> >
>
> thank you for the patch; it looks good. However, for aesthetic and
> consistency reasons, I'd like to request an update.
>
> The placement of the new setting is entirely right in the
> "OvmfPkgIa32X64.dsc" file. However, the Ia32 and X64 DSC files don't
> follow that placement. Therefore I would like to request the following
> two changes, for both the Ia32 and X64 DSC files:
>
> - please move the new setting just above the "!ifndef $(USE_OLD_SHELL)"
> part, where "PcdShellFile" is set,
>
> - please un-indent the new setting to column zero. (Well, the "!if" goes
> to column zero, the actual setting goes to column two.)
>
> The idea is that all three DSC files should remain pair-wise comparable
> with the "diff" utility; any differences displayed by "diff" should be
> related to *genuine* Ia32 <-> Ia32X64 <-> X64 differences.
>
> For the next version, I think you can carry forward the following two
> tags from Gary (see his email elsewhere in this thread):
>
> Reviewed-by: Gary Lin <glin@suse.com>
> Tested-by: Gary Lin <glin@suse.com>
>
> (I'm just repeating them here so you can easily cut n' paste them to the
> commit message.)
>
> Thank you!
> Laszlo
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2017-01-20 0:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-19 5:18 [PATCH v3 0/3] Enable the HTTP connections switch Jiaxin Wu
2017-01-19 5:18 ` [PATCH v3 1/3] NetworkPkg: Add PCD to enable " Jiaxin Wu
2017-01-19 5:18 ` [PATCH v3 2/3] Nt32Pkg.dsc: Add flag to control HTTP connections Jiaxin Wu
2017-01-19 5:18 ` [PATCH 3/3] OvmfPkg: Allow HTTP connections if HTTP Boot enabled Jiaxin Wu
2017-01-19 6:56 ` Gary Lin
2017-01-19 8:33 ` Laszlo Ersek
2017-01-20 0:54 ` Wu, Jiaxin [this message]
2017-01-23 2:11 ` [PATCH v3 0/3] Enable the HTTP connections switch Ye, Ting
2017-01-23 2:11 ` Fu, Siyuan
2017-01-23 2:40 ` Wu, Jiaxin
2017-01-23 10:36 ` Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=895558F6EA4E3B41AC93A00D163B72741629638B@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox