Re: SUT hangs after performing a warm boot.

["Wu, Jiaxin" <jiaxin.wu@intel.com>]

Or do you mean the issue should be reproduce at window warm boot with below steps?

1. Boot to windows
2. restart the windows, then hang happen?

Thanks,
Jiaxin

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Wu, Jiaxin
> Sent: Thursday, April 13, 2017 3:48 PM
> To: Santhapur Naveen <naveens@amiindia.co.in>; edk2-devel@lists.01.org
> Cc: Zhang, Lubo <lubo.zhang@intel.com>
> Subject: Re: [edk2] SUT hangs after performing a warm boot.
> 
> Naveen,
> 
> Do you mean only the "reset -w" operation caused the hang? Need us
> change the IPv6 policy?
> 
> Thanks,
> Jiaxin
> 
> > -----Original Message-----
> > From: Santhapur Naveen [mailto:naveens@amiindia.co.in]
> > Sent: Wednesday, April 12, 2017 8:12 PM
> > To: Wu, Jiaxin <jiaxin.wu@intel.com>; edk2-devel@lists.01.org
> > Cc: Zhang, Lubo <lubo.zhang@intel.com>
> > Subject: RE: SUT hangs after performing a warm boot.
> >
> > Hi Jiaxin,
> >
> > 	The patch in your previous mail doesn't help. The issue still exists
> > even after the patch.
> > 	After some debugging, it is found that it hangs in
> > p6SendNeighborSolicit()->Ip6Output()call.
> >
> > 	//
> >           // Send the Neighbor Solicitation message with
> >           // Source - unspecified address, destination - solicited-node multicast
> > address
> >           // Target - the address to be validated
> >           //
> >           Status = Ip6SendNeighborSolicit (
> >                      IpSb,
> >                      NULL,
> >                      &DupAddrDetect->Destination,
> >                      &DupAddrDetect->AddressInfo->Address,
> >                      NULL
> >                      );
> >
> > 	I shall update you more information soon.
> >
> > Thanks,
> > Naveen
> >
> > -----Original Message-----
> > From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
> > Sent: Tuesday, April 11, 2017 8:55 AM
> > To: Santhapur Naveen; edk2-devel@lists.01.org
> > Cc: Zhang, Lubo
> > Subject: RE: SUT hangs after performing a warm boot.
> >
> > Ok, I didn't loop in another email discussion. I just reviewed the patch from
> > Lubo, and I think it may be related to this issue since both of them are
> > triggered  by Ip6NdFasterTimerTicking.
> >
> > Thanks,
> > Jiaxin
> >
> > > -----Original Message-----
> > > From: Santhapur Naveen [mailto:naveens@amiindia.co.in]
> > > Sent: Tuesday, April 11, 2017 10:20 AM
> > > To: Wu, Jiaxin <jiaxin.wu@intel.com>; edk2-devel@lists.01.org
> > > Subject: RE: SUT hangs after performing a warm boot.
> > >
> > > Hi Jiaxin,
> > >
> > > 	I think this patch is for another fix which causes ASSERT. But
> > > anyways I'll give it a try and update you.
> > >
> > > Thanks,
> > > Naveen
> > >
> > > -----Original Message-----
> > > From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
> > > Sent: Tuesday, April 11, 2017 7:05 AM
> > > To: Santhapur Naveen; edk2-devel@lists.01.org
> > > Subject: RE: SUT hangs after performing a warm boot.
> > >
> > > Hi Naveen,
> > >
> > > Can you help to verify whether the attached patch can resolve your issue?
> > >
> > > Thanks,
> > > Jiaxin
> > >
> > > > -----Original Message-----
> > > > From: Santhapur Naveen [mailto:naveens@amiindia.co.in]
> > > > Sent: Monday, April 10, 2017 7:31 PM
> > > > To: Wu, Jiaxin <jiaxin.wu@intel.com>; edk2-devel@lists.01.org
> > > > Subject: RE: SUT hangs after performing a warm boot.
> > > >
> > > > Hi Jiaxin,
> > > >
> > > > 	Below are the simple reproduction steps:
> > > >
> > > > 	BIOS UEFI Class3
> > > > 	(1)   Connect LAN cable (Realtek)
> > > > 	(2)   Do cold boot or warm boot stress (Windows 10)
> > > >
> > > > 	Please let me know for any additional information you may need.
> > > >
> > > > Thanks,
> > > > Naveen
> > > >
> > > > -----Original Message-----
> > > > From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
> > > > Sent: Monday, April 10, 2017 6:00 AM
> > > > To: Santhapur Naveen; edk2-devel@lists.01.org
> > > > Subject: RE: SUT hangs after performing a warm boot.
> > > >
> > > > Hi Naveen,
> > > >
> > > > As the description of Ip6NdFasterTimerTicking(), it's the time
> > > > routine of ND module for IPv6.
> > > >
> > > > Can you provide the detailed reproduce steps?
> > > >
> > > > Thanks,
> > > > Jiaxin
> > > >
> > > > > -----Original Message-----
> > > > > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On
> > > > > Behalf Of Santhapur Naveen
> > > > > Sent: Friday, April 7, 2017 8:20 PM
> > > > > To: edk2-devel@lists.01.org
> > > > > Subject: [edk2] SUT hangs after performing a warm boot.
> > > > >
> > > > > Hi all,
> > > > >
> > > > >           Under NetworkPkg, in Ip6Dxe driver, what purpose does
> > > > > this function
> > > > > Ip6NdFasterTimerTicking() serve?
> > > > >           Sometimes, the SUT hangs in this function (at
> > > > > bootmgfw.Entry) when booting to Windows after performing a warm
> > > boot.
> > > > >
> > > > > Thanks,
> > > > > Naveen
> > > > > _______________________________________________
> > > > > edk2-devel mailing list
> > > > > edk2-devel@lists.01.org
> > > > > https://lists.01.org/mailman/listinfo/edk2-devel
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel