From: "Wu, Jiaxin" <jiaxin.wu@intel.com>
To: Karunakar P <karunakarp@amiindia.co.in>,
"Richardson, Brian" <brian.richardson@intel.com>,
"Fu, Siyuan" <siyuan.fu@intel.com>,
"Ye, Ting" <ting.ye@intel.com>,
"'edk2-devel@lists.01.org'" <edk2-devel@lists.01.org>
Subject: Re: DHCP Process Starts Even there is NO Media Connected
Date: Fri, 1 Dec 2017 08:37:57 +0000 [thread overview]
Message-ID: <895558F6EA4E3B41AC93A00D163B72741634EC46@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <A885E3F3F1F22B44AF7CC779C062228EE069DC26@VENUS1.in.megatrends.com>
Thanks Karunakar, we suggest you create the patches as attached files. Then you can send it to 'edk2-devel@lists.01.org' directly with GIT command:):
git send-email xxx.patch xxx.patch xxx.patch --to=edk2-devel@lists.01.org --force
Thanks,
Jiaxin
> -----Original Message-----
> From: Karunakar P [mailto:karunakarp@amiindia.co.in]
> Sent: Friday, December 1, 2017 2:05 PM
> To: Wu, Jiaxin <jiaxin.wu@intel.com>; Richardson, Brian
> <brian.richardson@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Ye, Ting
> <ting.ye@intel.com>; 'edk2-devel@lists.01.org' <edk2-devel@lists.01.org>
> Subject: RE: DHCP Process Starts Even there is NO Media Connected
>
> Please review the patch
>
> [Patch] MdeModulePkg/Universal/Network/Dhcp4Dxe: Implantation of
> handling EFI_NO_MEDIA status code for DHCP4/6.Start()
> NetworkPkg/Dhcp6Dxe : Implantation of handling EFI_NO_MEDIA status
> code for DHCP4/6.Start()
>
> MdeModulePkg/Universal/Network/Dhcp4Dxe/ Dhcp4Impl.c | 11
> NetworkPkg/Dhcp6Dxe/ Dhcp6Impl.c | 11
> 2 files changed, 22 insertions(+)
>
> a. MdeModulePkg/Universal/Network/Dhcp4Dxe/ Dhcp4Impl.c
> b. NetworkPkg/Dhcp6Dxe/ Dhcp6Impl.c
>
>
> a@ EfiDhcp4Start (
> IN EFI_DHCP4_PROTOCOL *This,
> IN EFI_EVENT CompletionEvent OPTIONAL
> )
> {
> DHCP_PROTOCOL *Instance;
> DHCP_SERVICE *DhcpSb;
> EFI_STATUS Status;
> EFI_TPL OldTpl;
> + BOOLEAN MediaPresent;
> .
> .
> .
> OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
> DhcpSb = Instance->Service;
>
> + //
> + // Check media status before DHCP Start.
> + //
> + MediaPresent = TRUE;
> + NetLibDetectMedia (DhcpSb->Controller, &MediaPresent);
> + if (!MediaPresent) {
> + Status = EFI_NO_MEDIA;
> + DEBUG((DEBUG_ERROR,"\nIn EfiDhcp4Start MediaPresent Status
> = %r\n",Status));
> + goto ON_ERROR;
> + }
>
> if (DhcpSb->DhcpState == Dhcp4Stopped) {
> Status = EFI_NOT_STARTED;
> goto ON_ERROR;
> }
> .
> .
> .
> }
>
>
> b @ EfiDhcp6Start (
> IN EFI_DHCP6_PROTOCOL *This
> )
> {
> EFI_STATUS Status;
> EFI_TPL OldTpl;
> DHCP6_INSTANCE *Instance;
> DHCP6_SERVICE *Service;
> + BOOLEAN MediaPresent;
> .
> .
> .
> OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
> Instance->UdpSts = EFI_ALREADY_STARTED;
>
> + //
> + // Check media status before DHCP Start.
> + //
> + MediaPresent = TRUE;
> + NetLibDetectMedia (Service->Controller, &MediaPresent);
> + if (!MediaPresent) {
> + Status = EFI_NO_MEDIA;
> + DEBUG((DEBUG_ERROR,"\nIn EfiDhcp6Start MediaPresent Status
> = %r\n",Status));
> + goto ON_ERROR;
> + }
>
> //
> // Send the solicit message to start S.A.R.R process.
> //
> Status = Dhcp6SendSolicitMsg (Instance);
> .
> .
> .
> }
>
>
> Thanks,
> Karunakar
>
> -----Original Message-----
> From: Karunakar P
> Sent: Friday, December 01, 2017 11:10 AM
> To: 'Wu, Jiaxin'; Richardson, Brian; Fu, Siyuan; Ye, Ting; 'edk2-
> devel@lists.01.org'
> Subject: RE: DHCP Process Starts Even there is NO Media Connected
>
> Hi Jiaxin,
>
> I've updated the patch changes for Dhcp6Dxe driver also and attached the
> same for review.
>
> Filed a tracker in TianoCore Bugzilla for this issue and attached the changes
> for review,
> https://bugzilla.tianocore.org/show_bug.cgi?id=804
>
> Thanks,
> Karunakar
>
> -----Original Message-----
> From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
> Sent: Friday, December 01, 2017 9:15 AM
> To: Richardson, Brian; Karunakar P; Fu, Siyuan; Ye, Ting; 'edk2-
> devel@lists.01.org'
> Subject: RE: DHCP Process Starts Even there is NO Media Connected
>
> Hi Karunakar,
>
> Per your question #3.c, I think it's *unreasonable* to check Media Status for
> EFI_IP4_CONFIG2_SET_DATA.
>
> Even there is no media connected, we still need to set the data instead of
> return directly. If the EFI_IP4_CONFIG2_SET_DATA.SetData() is to set the
> DHCP policy, the SetData() interface will try to do the DHCP process to get
> one valid default address, but if there is any failure happen in DHCP process
> (e.g. no media connected), we should continue change the policy to DHCP
> and return EFI_SUCCESS, which align with static policy. So, I don't prefer to
> check the Media Status in EFI_IP4_CONFIG2_SET_DATA.SetData().
>
> I have reviewed your patch, the Dhcp4Dxe update is good to me. Can you
> send out the formal patch to the EDK2 community for the review or need us
> do to that? Note: don't forget to update the Dhcp6Dxe driver.
>
> Also thanks Brain's reminder, please file a tracker in TianoCore Bugzilla for
> this issue.
>
> Thanks,
> Jiaxin
>
> > -----Original Message-----
> > From: Richardson, Brian
> > Sent: Thursday, November 30, 2017 11:02 PM
> > To: Karunakar P <karunakarp@amiindia.co.in>; Wu, Jiaxin
> > <jiaxin.wu@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Ye, Ting
> > <ting.ye@intel.com>; 'edk2-devel@lists.01.org'
> > <edk2-devel@lists.01.org>
> > Subject: RE: DHCP Process Starts Even there is NO Media Connected
> >
> > We saw some problems running Linux UEFI Validation (LUV) at the last
> > UEFI Plugfest that are probably related to this issue. At the time we
> > asked the LUV team to investigate it as a test issue, but it may
> > actually be a stack problem based on this information.
> >
> > Have you filed a tracker in TianoCore Bugzilla for this issue?
> >
> > Thanks ... br
> > ---
> > Brian Richardson, Senior Technical Marketing Engineer, Intel Software
> > brian.richardson@intel.com -- @intel_brian (Twitter & WeChat)
> > https://software.intel.com/en-us/meet-the-
> developers/evangelists/team/
> > brian-
> > richardson
> >
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > Karunakar P
> > Sent: Thursday, November 30, 2017 3:59 AM
> > To: Wu, Jiaxin <jiaxin.wu@intel.com>; Fu, Siyuan
> > <siyuan.fu@intel.com>; Ye, Ting <ting.ye@intel.com>;
> > 'edk2-devel@lists.01.org' <edk2-devel@lists.01.org>
> > Subject: Re: [edk2] DHCP Process Starts Even there is NO Media
> > Connected
> >
> > Hi Jiaxin,
> >
> > Please find my below comments/suggestions.
> >
> >
> > 1. Yes, Current DHCP4/6 Start() implementation doesn't check for Media
> > Status. It will be better to implement it in order to sync with UEFI spec.
> >
> > 2. DHCP process may be initiated by HTTP/PXE/ISCSI or Assigning IP
> > (SetData) from Shell or using BIOS setup page.
> >
> > HTTP,PXE and ISCSI is already Checking Media Presence before DHCP
> > Start, So it will have NO effect if we do implementation in DHCP4/6 Start().
> >
> > 3. Current implementation of EFI_IP4_CONFIG2_SET_DATA, also NOT
> > handling checking Media Status.
> >
> > a. UEFI Spec NOT defines EFI_NO_MEDIA status code for
> > EFI_IP4_CONFIG2_SET_DATA, I'm NOT sure what's reason behind it or
> > might be missing.
> >
> > b. UEFI Spec defines EFI_DEVICE_ERROR status code for
> > EFI_IP4_CONFIG2_SET_DATA, If we can use the same status for Media
> > presence then no issues.
> >
> > c. When there is No Media connected and if we try to assign IP over
> > DHCP(SetData), I guess there is no need to proceed further in
> > EfiIp4Config2SetData and we can return with EFI_DEVICE_ERROR.
> >
> > Based on above points(1 & 3.c ), I've updated the suggested changes
> > and attached the same (CheckMediaStatus_V2.rar)
> >
> > Could you please review and provide your comments.
> > Please correct if anything wrong.
> >
> > Thank You,
> > Karunakar
> >
> > From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
> > Sent: Wednesday, November 29, 2017 11:57 AM
> > To: Karunakar P; Fu, Siyuan; Ye, Ting
> > Subject: RE: DHCP Process Starts Even there is NO Media Connected
> >
> > Hi Karunakar,
> >
> > After talk with Siyuan, we agree it's reasonable to check the Media
> > status before starting DHCP process, but we'd better check it in DHCP
> > layer since the UEFI spec defines EFI_NO_MEDIA status code for
> > DHCP4/6.Start(), but our current implementation doesn't check it.
> >
> > What do you think?
> >
> > Thanks,
> > Jiaxin
> >
> >
> >
> > From: Karunakar P [mailto:karunakarp@amiindia.co.in]
> > Sent: Tuesday, November 28, 2017 11:18 PM
> > To: Wu, Jiaxin <jiaxin.wu@intel.com<mailto:jiaxin.wu@intel.com>>; Fu,
> > Siyuan <siyuan.fu@intel.com<mailto:siyuan.fu@intel.com>>; Ye, Ting
> > <ting.ye@intel.com<mailto:ting.ye@intel.com>>
> > Subject: RE: DHCP Process Starts Even there is NO Media Connected
> >
> > Could you please review the attachment changes for this support.
> >
> > Thanks,
> > Karunakar
> >
> > From: Karunakar P
> > Sent: Monday, November 27, 2017 12:53 PM
> > To: 'Wu, Jiaxin'; 'Fu, Siyuan'; 'Ye, Ting'
> > Subject: RE: DHCP Process Starts Even there is NO Media Connected
> >
> > Could you please provide your comments...
> >
> > Thank You,
> > Karunakar
> >
> > From: Karunakar P
> > Sent: Thursday, November 23, 2017 2:05 PM
> > To: 'Wu, Jiaxin'; Fu, Siyuan; Ye, Ting
> > Subject: DHCP Process Starts Even there is NO Media Connected
> >
> > Hello All,
> >
> > When we try to Assign IP to SUT using ifconfig command from Shell or
> > IPv4 Network Configuration BIOS setup page DHCP process start even
> > there is no LAN cable connected to specific port.
> >
> > Can we add a Media presence condition check before starting DHCP service?
> >
> > Could you please correct if anything is wrong.
> >
> > Thanks,
> > Karunakar
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
prev parent reply other threads:[~2017-12-01 8:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <A885E3F3F1F22B44AF7CC779C062228EE069B22A@VENUS1.in.megatrends.com>
[not found] ` <A885E3F3F1F22B44AF7CC779C062228EE069B3D3@VENUS1.in.megatrends.com>
[not found] ` <A885E3F3F1F22B44AF7CC779C062228EE069B8A7@VENUS1.in.megatrends.com>
[not found] ` <895558F6EA4E3B41AC93A00D163B72741634DAB3@SHSMSX103.ccr.corp.intel.com>
2017-11-30 8:58 ` DHCP Process Starts Even there is NO Media Connected Karunakar P
2017-11-30 15:01 ` Richardson, Brian
2017-12-01 3:44 ` Wu, Jiaxin
2017-12-01 5:40 ` Karunakar P
2017-12-01 6:05 ` Karunakar P
2017-12-01 8:37 ` Wu, Jiaxin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=895558F6EA4E3B41AC93A00D163B72741634EC46@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox