From: "Wei, David" <david.wei@intel.com>
To: "Guo, Mang" <mang.guo@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Subject: Re: [PATCH] ChvFspBinPkg: Remove FspUpdVpd.h
Date: Fri, 19 Aug 2016 02:07:32 +0000 [thread overview]
Message-ID: <89954A0B46707A448411A627AD4EEE3437D87245@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <22D2C85ED001C54AA20BFE3B0E4751D111AA1083@SHSMSX103.ccr.corp.intel.com>
Reviewed-by: David Wei <david.wei@intel.com>
Thanks,
David Wei
-----Original Message-----
From: Guo, Mang
Sent: Thursday, August 18, 2016 10:38 AM
To: edk2-devel@lists.01.org
Cc: Wei, David <david.wei@intel.com>
Subject: [PATCH] ChvFspBinPkg: Remove FspUpdVpd.h
FspUpdVpd.h can be downloaded from FSP GitHub Repo: https://github.com/IntelFsp/FSP/tree/Braswell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Guo Mang <mang.guo@intel.com>
---
ChvFspBinPkg/Include/FspUpdVpd.h | 510 ---------------------------------------
1 file changed, 510 deletions(-)
delete mode 100644 ChvFspBinPkg/Include/FspUpdVpd.h
diff --git a/ChvFspBinPkg/Include/FspUpdVpd.h b/ChvFspBinPkg/Include/FspUpdVpd.h
deleted file mode 100644
index 1786fe1..0000000
--- a/ChvFspBinPkg/Include/FspUpdVpd.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/** @file
-
-Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPUPDVPD_H__
-#define __FSPUPDVPD_H__
-
-#pragma pack(1)
-
-
-#define MAX_CHANNELS_NUM 2
-#define MAX_DIMMS_NUM 2
-
-typedef struct {
- UINT32 VendorDeviceId;
- UINT16 SubSystemId;
- UINT8 RevisionId; /// 0xFF applies to all steppings
- UINT8 FrontPanelSupport;
- UINT16 NumberOfRearJacks;
- UINT16 NumberOfFrontJacks;
-} BL_PCH_AZALIA_VERB_TABLE_HEADER;
-
-typedef struct {
- BL_PCH_AZALIA_VERB_TABLE_HEADER VerbTableHeader;
- UINT32 *VerbTableData;
-} BL_PCH_AZALIA_VERB_TABLE;
-
-typedef struct {
- UINT8 Pme : 1; /// 0: Disable; 1: Enable
- UINT8 DS : 1; /// 0: Docking is not supported; 1:Docking is supported
- UINT8 DA : 1; /// 0: Docking is not attached; 1:Docking is attached
- UINT8 HdmiCodec : 1; /// 0: Disable; 1: Enable
- UINT8 AzaliaVCi : 1; /// 0: Disable; 1: Enable
- UINT8 Rsvdbits : 3;
- UINT8 AzaliaVerbTableNum; /// Number of verb tables provided by platform
- BL_PCH_AZALIA_VERB_TABLE *AzaliaVerbTable; /// Pointer to the actual verb table(s)
- UINT16 ResetWaitTimer; /// The delay timer after Azalia reset, the value is number of microseconds
-} BL_PCH_AZALIA_CONFIG;
-
-typedef struct {
- UINT32 Confg;
- UINT32 ConfgChanges;
- UINT32 Misc;
- UINT32 MmioAddr;
- CHAR16 *Name;
-} BL_GPIO_FAMILY_INIT;
-
-typedef struct {
- UINT32 Confg0;
- UINT32 Confg0Changes;
- UINT32 Confg1;
- UINT32 Confg1Changes;
- UINT32 Community;
- UINT32 MmioAddr;
- CHAR16 *Name;
- UINT32 Misc;
-} BL_GPIO_PAD_INIT;
-
-typedef struct {
- UINT8 DimmId;
- UINT32 SizeInMb;
- UINT16 MfgId;
- /** Module part number for DRR3 is 18 bytes
- but DRR4 is 20 bytes as per JEDEC Spec, so
- reserving 20 bytes **/
- UINT8 ModulePartNum[20];
-} DIMM_INFO;
-
-typedef struct {
- UINT8 ChannelId;
- UINT8 DimmCount;
- DIMM_INFO DimmInfo[MAX_DIMMS_NUM];
-} CHANNEL_INFO;
-
-typedef struct {
- UINT8 Revision;
- UINT8 DataWidth;
- /** As defined in SMBIOS 3.0 spec
- Section 7.18.2 and Table 75
- **/
- UINT8 MemoryType;
- UINT16 MemoryFrequencyInMHz;
- /** As defined in SMBIOS 3.0 spec
- Section 7.17.3 and Table 72
- **/
- UINT8 ErrorCorrectionType;
- UINT8 ChannelCount;
- CHANNEL_INFO ChannelInfo[MAX_CHANNELS_NUM];
-} FSP_SMBIOS_MEMORY_INFO;
-
-
-
-typedef struct {
-/** Offset 0x0020
-**/
- UINT64 Signature;
-/** Offset 0x0028
-**/
- UINT8 Revision;
-/** Offset 0x0029
-**/
- UINT8 UnusedUpdSpace2[7];
-/** Offset 0x0030
- Tseg Size
- Size of SMRAM memory reserved.
-**/
- UINT16 PcdMrcInitTsegSize;
-/** Offset 0x0032
- MMIO Size
- Size of memory address space reserved for MMIO (Memory Mapped I/O).
-**/
- UINT16 PcdMrcInitMmioSize;
-/** Offset 0x0034
- DIMM 0 SPD SMBus Address
- SPD Address of DIMM.
-**/
- UINT8 PcdMrcInitSpdAddr1;
-/** Offset 0x0035
- DIMM 1 SPD SMBus Address
- SPD Address of DIMM.
-**/
- UINT8 PcdMrcInitSpdAddr2;
-/** Offset 0x0036
-**/
- UINT8 PcdMemChannel0Config;
-/** Offset 0x0037
-**/
- UINT8 PcdMemChannel1Config;
-/** Offset 0x0038
-**/
- UINT32 PcdMemorySpdPtr;
-/** Offset 0x003C
- Internal Graphics Pre-allocated Memory
- Size of memory preallocated for internal graphics
-**/
- UINT8 PcdIgdDvmt50PreAlloc;
-/** Offset 0x003D
- Aperture Size
- Select the Aperture Size.
-**/
- UINT8 PcdApertureSize;
-/** Offset 0x003E
- GTT Size
- Select the GTT Size.
-**/
- UINT8 PcdGttSize;
-/** Offset 0x003F
- Enable Legacy E/F segments decoding to ROM
- If disabled, E0000h-FFFFFh decoding will be routed to DRAM.
-**/
- UINT8 PcdLegacySegDecode;
-/** Offset 0x0040
- Enable DVFS
- Enable/disable DVFS.
-**/
- UINT8 PcdDvfsEnable;
-/** Offset 0x0041
- MemoryType
- To Configure Memory Type
-**/
- UINT8 PcdMemoryTypeEnable;
-/** Offset 0x0042
- CaMirrorEn
- To Enable/Disable CaMirrorEn
-**/
- UINT8 PcdCaMirrorEn;
-/** Offset 0x0043
-**/
- UINT8 ReservedMemoryInitUpd[189];
-} MEMORY_INIT_UPD;
-
-typedef struct {
-/** Offset 0x0100
-**/
- UINT64 Signature;
-/** Offset 0x0108
-**/
- UINT8 Revision;
-/** Offset 0x0109
-**/
- UINT8 UnusedUpdSpace3[7];
-/** Offset 0x0110
- SD Card Mode
- SD Card Mode
-**/
- UINT8 PcdSdcardMode;
-/** Offset 0x0111
- Enable HSUART0
- Enable/disable HSUART0.
-**/
- UINT8 PcdEnableHsuart0;
-/** Offset 0x0112
- Enable HSUART1
- Enable/disable HSUART1.
-**/
- UINT8 PcdEnableHsuart1;
-/** Offset 0x0113
- Enable Azalia
- Enable/disable Azalia controller.
-**/
- UINT8 PcdEnableAzalia;
-/** Offset 0x0114
-**/
- BL_PCH_AZALIA_CONFIG* AzaliaConfigPtr;
-/** Offset 0x0118
- Enable SATA
- Enable/disable SATA controller.
-**/
- UINT8 PcdEnableSata;
-/** Offset 0x0119
- Enable XHCI
- Enable/disable XHCI controller.
-**/
- UINT8 PcdEnableXhci;
-/** Offset 0x011A
- Enable LPE
- Choose LPE Mode.
-**/
- UINT8 PcdEnableLpe;
-/** Offset 0x011B
- Enable DMA0
- Enable/disable DMA0.
-**/
- UINT8 PcdEnableDma0;
-/** Offset 0x011C
- Enable DMA1
- Enable/disable DMA1.
-**/
- UINT8 PcdEnableDma1;
-/** Offset 0x011D
- Enable I2C0
- Enable/disable I2C0.
-**/
- UINT8 PcdEnableI2C0;
-/** Offset 0x011E
- Enable I2C1
- Enable/disable I2C1.
-**/
- UINT8 PcdEnableI2C1;
-/** Offset 0x011F
- Enable I2C2
- Enable/disable I2C2.
-**/
- UINT8 PcdEnableI2C2;
-/** Offset 0x0120
- Enable I2C3
- Enable/disable I2C3.
-**/
- UINT8 PcdEnableI2C3;
-/** Offset 0x0121
- Enable I2C4
- Enable/disable I2C4.
-**/
- UINT8 PcdEnableI2C4;
-/** Offset 0x0122
- Enable I2C5
- Enable/disable I2C5.
-**/
- UINT8 PcdEnableI2C5;
-/** Offset 0x0123
- Enable I2C6
- Enable/disable I2C6.
-**/
- UINT8 PcdEnableI2C6;
-/** Offset 0x0124
-**/
- UINT32 GraphicsConfigPtr;
-/** Offset 0x0128
-**/
- BL_GPIO_FAMILY_INIT* GpioFamilyInitTablePtr;
-/** Offset 0x012C
-**/
- BL_GPIO_PAD_INIT* GpioPadInitTablePtr;
-/** Offset 0x0130
-**/
- UINT8 PunitPwrConfigDisable;
-/** Offset 0x0131
-**/
- UINT8 ChvSvidConfig;
-/** Offset 0x0132
-**/
- UINT8 DptfDisable;
-/** Offset 0x0133
- eMMC Mode
- EMMC Mode
-**/
- UINT8 PcdEmmcMode;
-/** Offset 0x0134
-**/
- UINT8 PcdUsb3ClkSsc;
-/** Offset 0x0135
-**/
- UINT8 PcdDispClkSsc;
-/** Offset 0x0136
-**/
- UINT8 PcdSataClkSsc;
-/** Offset 0x0137
-**/
- UINT8 Usb2Port0PerPortPeTxiSet;
-/** Offset 0x0138
-**/
- UINT8 Usb2Port0PerPortTxiSet;
-/** Offset 0x0139
-**/
- UINT8 Usb2Port0IUsbTxEmphasisEn;
-/** Offset 0x013A
-**/
- UINT8 Usb2Port0PerPortTxPeHalf;
-/** Offset 0x013B
-**/
- UINT8 Usb2Port1PerPortPeTxiSet;
-/** Offset 0x013C
-**/
- UINT8 Usb2Port1PerPortTxiSet;
-/** Offset 0x013D
-**/
- UINT8 Usb2Port1IUsbTxEmphasisEn;
-/** Offset 0x013E
-**/
- UINT8 Usb2Port1PerPortTxPeHalf;
-/** Offset 0x013F
-**/
- UINT8 Usb2Port2PerPortPeTxiSet;
-/** Offset 0x0140
-**/
- UINT8 Usb2Port2PerPortTxiSet;
-/** Offset 0x0141
-**/
- UINT8 Usb2Port2IUsbTxEmphasisEn;
-/** Offset 0x0142
-**/
- UINT8 Usb2Port2PerPortTxPeHalf;
-/** Offset 0x0143
-**/
- UINT8 Usb2Port3PerPortPeTxiSet;
-/** Offset 0x0144
-**/
- UINT8 Usb2Port3PerPortTxiSet;
-/** Offset 0x0145
-**/
- UINT8 Usb2Port3IUsbTxEmphasisEn;
-/** Offset 0x0146
-**/
- UINT8 Usb2Port3PerPortTxPeHalf;
-/** Offset 0x0147
-**/
- UINT8 Usb2Port4PerPortPeTxiSet;
-/** Offset 0x0148
-**/
- UINT8 Usb2Port4PerPortTxiSet;
-/** Offset 0x0149
-**/
- UINT8 Usb2Port4IUsbTxEmphasisEn;
-/** Offset 0x014A
-**/
- UINT8 Usb2Port4PerPortTxPeHalf;
-/** Offset 0x014B
-**/
- UINT8 Usb3Lane0Ow2tapgen2deemph3p5;
-/** Offset 0x014C
-**/
- UINT8 Usb3Lane1Ow2tapgen2deemph3p5;
-/** Offset 0x014D
-**/
- UINT8 Usb3Lane2Ow2tapgen2deemph3p5;
-/** Offset 0x014E
-**/
- UINT8 Usb3Lane3Ow2tapgen2deemph3p5;
-/** Offset 0x014F
- SATA Interface Speed
- Select SATA controller Interface Speed.
-**/
- UINT8 PcdSataInterfaceSpeed;
-/** Offset 0x0150
-**/
- UINT8 PcdPchUsbSsicPort;
-/** Offset 0x0151
-**/
- UINT8 PcdPchUsbHsicPort;
-/** Offset 0x0152
-**/
- UINT8 PcdPcieRootPortSpeed;
-/** Offset 0x0153
-**/
- UINT8 PcdPchSsicEnable;
-/** Offset 0x0154
-**/
- UINT32 PcdLogoPtr;
-/** Offset 0x0158
-**/
- UINT32 PcdLogoSize;
-/** Offset 0x015C
-**/
- UINT8 PcdRtcLock;
-/** Offset 0x015D
- PMIC I2c Bus Number
- I2c Bus Number to communicate with PMIC
-**/
- UINT8 PMIC_I2CBus;
-/** Offset 0x015E
- Enable ISP
- Enable/disable ISP.
-**/
- UINT8 ISPEnable;
-/** Offset 0x015F
- Select ISP Device Number
- Select ISP PCI Device Configuration
-**/
- UINT8 ISPPciDevConfig;
-/** Offset 0x0160
- Processor Turbo Mode
- Enable/disable Processor Turbo Mode.
-**/
- UINT8 PcdTurboMode;
-/** Offset 0x0161
- Pnp-Power & Performance
- select Pnp type
-**/
- UINT8 PcdPnpSettings;
-/** Offset 0x0162
- SdDetectChk
- Check for Sd card detect
-**/
- UINT8 PcdSdDetectChk;
-/** Offset 0x0163
-**/
- UINT8 ReservedSiliconInitUpd[411];
-} SILICON_INIT_UPD;
-
-#define FSP_UPD_SIGNATURE 0x2444505557534224 /* '$BSWUPD$' */
-#define FSP_MEMORY_INIT_UPD_SIGNATURE 0x244450554D454D24 /* '$MEMUPD$' */
-#define FSP_SILICON_INIT_UPD_SIGNATURE 0x244450555F495324 /* '$SI_UPD$' */
-
-typedef struct _UPD_DATA_REGION {
-/** Offset 0x0000
-**/
- UINT64 Signature;
-/** Offset 0x0008
-**/
- UINT8 Revision;
-/** Offset 0x0009
-**/
- UINT8 UnusedUpdSpace0[7];
-/** Offset 0x0010
-**/
- UINT32 MemoryInitUpdOffset;
-/** Offset 0x0014
-**/
- UINT32 SiliconInitUpdOffset;
-/** Offset 0x0018
-**/
- UINT64 UnusedUpdSpace1;
-/** Offset 0x0020
-**/
- MEMORY_INIT_UPD MemoryInitUpd;
-/** Offset 0x0100
-**/
- SILICON_INIT_UPD SiliconInitUpd;
-/** Offset 0x02FE
-**/
- UINT16 PcdRegionTerminator;
-} UPD_DATA_REGION;
-
-#define FSP_IMAGE_ID 0x2450534657534224 /* '$BSWFSP$' */
-#define FSP_IMAGE_REV 0x01010200
-
-typedef struct _VPD_DATA_REGION {
-/** Offset 0x0000
-**/
- UINT64 PcdVpdRegionSign;
-/** Offset 0x0008
- PcdImageRevision
-**/
- UINT32 PcdImageRevision;
-/** Offset 0x000C
-**/
- UINT32 PcdUpdRegionOffset;
-} VPD_DATA_REGION;
-
-#pragma pack()
-
-#endif
--
2.8.1.windows.1
prev parent reply other threads:[~2016-08-19 2:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 2:38 [PATCH] ChvFspBinPkg: Remove FspUpdVpd.h Guo, Mang
2016-08-19 2:07 ` Wei, David [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=89954A0B46707A448411A627AD4EEE3437D87245@SHSMSX101.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox