[PATCH v13 26/46] OvmfPkg/VmgExitLib: Add support for DR7 Read/Write NAE events

["Lendacky, Thomas" <thomas.lendacky@amd.com>]

From: Tom Lendacky <thomas.lendacky@amd.com>

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198

Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
The #VC handler must provide special support to the guest for this. On
a DR7 write, the #VC handler must cache the value and issue a VMGEXIT
to notify the hypervisor of the write. However, the #VC handler must
not actually set the value of the DR7 register. On a DR7 read, the #VC
handler must return the cached value of the DR7 register to the guest.
VMGEXIT is not invoked for a DR7 register read.

The caching of the DR7 values will make use of the per-CPU data pages
that are allocated along with the GHCB pages. The per-CPU page for a
vCPU is the page that immediately follows the vCPU's GHCB page. Since
each GHCB page is unique for a vCPU, the page that follows becomes
unique for that vCPU. The SEC phase will reserves an area of memory for
a single GHCB and per-CPU page for use by the BSP. After transitioning
to the PEI phase, new GHCB and per-CPU pages are allocated for the BSP
and all APs.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c | 114 ++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c b/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
index e70e0ef82f68..c57c8c4ba203 100644
--- a/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
+++ b/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c
@@ -126,6 +126,14 @@ UINT64
   SEV_ES_INSTRUCTION_DATA  *InstructionData
   );
 
+//
+// Per-CPU data mapping structure
+//
+typedef struct {
+  BOOLEAN  Dr7Cached;
+  UINT64   Dr7;
+} SEV_ES_PER_CPU_DATA;
+
 
 /**
   Checks the GHCB to determine if the specified register has been marked valid.
@@ -1480,6 +1488,104 @@ RdtscExit (
   return 0;
 }
 
+/**
+  Handle a DR7 register write event.
+
+  Use the VMGEXIT instruction to handle a DR7 write event.
+
+  @param[in, out] Ghcb             Pointer to the Guest-Hypervisor Communication
+                                   Block
+  @param[in, out] Regs             x64 processor context
+  @param[in]      InstructionData  Instruction parsing context
+
+  @retval 0                        Event handled successfully
+  @return                          New exception value to propagate
+
+**/
+STATIC
+UINT64
+Dr7WriteExit (
+  IN OUT GHCB                     *Ghcb,
+  IN OUT EFI_SYSTEM_CONTEXT_X64   *Regs,
+  IN     SEV_ES_INSTRUCTION_DATA  *InstructionData
+  )
+{
+  SEV_ES_INSTRUCTION_OPCODE_EXT  *Ext;
+  SEV_ES_PER_CPU_DATA            *SevEsData;
+  UINT64                         *Register;
+  UINT64                         Status;
+
+  Ext = &InstructionData->Ext;
+  SevEsData = (SEV_ES_PER_CPU_DATA *) (Ghcb + 1);
+
+  DecodeModRm (Regs, InstructionData);
+
+  //
+  // MOV DRn always treats MOD == 3 no matter how encoded
+  //
+  Register = GetRegisterPointer (Regs, Ext->ModRm.Rm);
+
+  //
+  // Using a value of 0 for ExitInfo1 means RAX holds the value
+  //
+  Ghcb->SaveArea.Rax = *Register;
+  GhcbSetRegValid (Ghcb, GhcbRax);
+
+  Status = VmgExit (Ghcb, SVM_EXIT_DR7_WRITE, 0, 0);
+  if (Status != 0) {
+    return Status;
+  }
+
+  SevEsData->Dr7 = *Register;
+  SevEsData->Dr7Cached = TRUE;
+
+  return 0;
+}
+
+/**
+  Handle a DR7 register read event.
+
+  Use the VMGEXIT instruction to handle a DR7 read event.
+
+  @param[in, out] Ghcb             Pointer to the Guest-Hypervisor Communication
+                                   Block
+  @param[in, out] Regs             x64 processor context
+  @param[in]      InstructionData  Instruction parsing context
+
+  @retval 0                        Event handled successfully
+
+**/
+STATIC
+UINT64
+Dr7ReadExit (
+  IN OUT GHCB                     *Ghcb,
+  IN OUT EFI_SYSTEM_CONTEXT_X64   *Regs,
+  IN     SEV_ES_INSTRUCTION_DATA  *InstructionData
+  )
+{
+  SEV_ES_INSTRUCTION_OPCODE_EXT  *Ext;
+  SEV_ES_PER_CPU_DATA            *SevEsData;
+  UINT64                         *Register;
+
+  Ext = &InstructionData->Ext;
+  SevEsData = (SEV_ES_PER_CPU_DATA *) (Ghcb + 1);
+
+  DecodeModRm (Regs, InstructionData);
+
+  //
+  // MOV DRn always treats MOD == 3 no matter how encoded
+  //
+  Register = GetRegisterPointer (Regs, Ext->ModRm.Rm);
+
+  //
+  // If there is a cached valued for DR7, return that. Otherwise return the
+  // DR7 standard reset value of 0x400 (no debug breakpoints set).
+  //
+  *Register = (SevEsData->Dr7Cached) ? SevEsData->Dr7 : 0x400;
+
+  return 0;
+}
+
 /**
   Handle a #VC exception.
 
@@ -1524,6 +1630,14 @@ VmgExitHandleVc (
 
   ExitCode = Regs->ExceptionData;
   switch (ExitCode) {
+  case SVM_EXIT_DR7_READ:
+    NaeExit = Dr7ReadExit;
+    break;
+
+  case SVM_EXIT_DR7_WRITE:
+    NaeExit = Dr7WriteExit;
+    break;
+
   case SVM_EXIT_RDTSC:
     NaeExit = RdtscExit;
     break;
-- 
2.27.0