From: "wenyi,xie" <xiewenyi2@huawei.com>
To: "Yao, Jiewen" <jiewen.yao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Lu, Xiaoyu1" <xiaoyu1.lu@intel.com>,
"Jiang, Guomin" <guomin.jiang@intel.com>
Cc: "songdongkuang@huawei.com" <songdongkuang@huawei.com>,
"yizihong@huawei.com" <yizihong@huawei.com>
Subject: Re: [edk2-devel] [PATCH EDK2 v1 1/1] CryptoPkg/BaseCryptLib:time overflow
Date: Thu, 1 Dec 2022 20:34:07 +0800 [thread overview]
Message-ID: <99aa4b4b-5410-c2cf-4668-e28815ff783d@huawei.com> (raw)
In-Reply-To: <MW4PR11MB587218293CF027F06BB509568C149@MW4PR11MB5872.namprd11.prod.outlook.com>
On 2022/12/1 16:34, Yao, Jiewen wrote:
> Thank you!
>
> Would you please share what test you have run for this patch, such as UEFI secure boot? HTTPS boot?
>
Hi, Jiewen
We found this problem when importing certification and verifying the expiration date(the verifying code is customed), so we only using a X64 board to do the test like below:
1. Entering setup page
2. Setting system time to 2038.9.27 19:23
3. Importing a X509 certification, which is valid from 2022.9.27 1:59 to 2023.9.27 1:59
before merging the patch
the certification can be imported successfully.
after merging the patch
importing failed.
>
>
>> -----Original Message-----
>> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
>> wenyi,xie via groups.io
>> Sent: Friday, November 25, 2022 5:12 PM
>> To: devel@edk2.groups.io; Yao, Jiewen <jiewen.yao@intel.com>; Wang, Jian
>> J <jian.j.wang@intel.com>; Lu, Xiaoyu1 <xiaoyu1.lu@intel.com>; Jiang,
>> Guomin <guomin.jiang@intel.com>
>> Cc: songdongkuang@huawei.com; xiewenyi2@huawei.com;
>> yizihong@huawei.com
>> Subject: [edk2-devel] [PATCH EDK2 v1 1/1] CryptoPkg/BaseCryptLib:time
>> overflow
>>
>> From: Zihong Yi <yizihong@huawei.com>
>>
>> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4167
>>
>> In CrtLibSupport.h, time_t is defined as INT32, and its maximum value
>> is 2147483647. That is, the corresponding maximum timestamp is
>> 2038-01-19 11:14:07. Therefore, overflow occurs when the test time
>> exceeds 2038-01-19 11:14:07. So change the type of time_t to INT64 and
>> also change the type of variables in function gmtime which calculated
>> with time_t.
>>
>> Cc: Jiewen Yao <jiewen.yao@intel.com>
>> Cc: Jian J Wang <jian.j.wang@intel.com>
>> Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
>> Cc: Guomin Jiang <guomin.jiang@intel.com>
>> Signed-off-by: Zihong Yi <yizihong@huawei.com>
>> ---
>> CryptoPkg/Library/Include/CrtLibSupport.h | 2 +-
>> CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c | 51
>> ++++++++++++++------
>> 2 files changed, 38 insertions(+), 15 deletions(-)
>>
>> diff --git a/CryptoPkg/Library/Include/CrtLibSupport.h
>> b/CryptoPkg/Library/Include/CrtLibSupport.h
>> index 5072c343da57..94b0e6b6014f 100644
>> --- a/CryptoPkg/Library/Include/CrtLibSupport.h
>> +++ b/CryptoPkg/Library/Include/CrtLibSupport.h
>> @@ -109,7 +109,7 @@ typedef UINTN off_t;
>> typedef UINTN u_int;
>> typedef INTN ptrdiff_t;
>> typedef INTN ssize_t;
>> -typedef INT32 time_t;
>> +typedef INT64 time_t;
>> typedef UINT8 __uint8_t;
>> typedef UINT8 sa_family_t;
>> typedef UINT8 u_char;
>> diff --git a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> index bf8a5325817f..3ed64375d0ff 100644
>> --- a/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> +++ b/CryptoPkg/Library/BaseCryptLib/SysCall/TimerWrapper.c
>> @@ -15,7 +15,6 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>> // -- Time Management Routines --
>> //
>>
>> -#define IsLeap(y) (((y) % 4) == 0 && (((y) % 100) != 0 || ((y) % 400) == 0))
>> #define SECSPERMIN (60)
>> #define SECSPERHOUR (60 * 60)
>> #define SECSPERDAY (24 * SECSPERHOUR)
>> @@ -60,6 +59,26 @@ UINTN CumulativeDays[2][14] = {
>> }
>> };
>>
>> +/* Check the year is leap or not. */
>> +// BOOLEAN IsLeap(
>> +// INTN timer
>> +// )
>> +BOOLEAN
>> +IsLeap (
>> + time_t timer
>> + )
>> +{
>> + INT64 Remainder1;
>> + INT64 Remainder2;
>> + INT64 Remainder3;
>> +
>> + DivS64x64Remainder (timer, 4, &Remainder1);
>> + DivS64x64Remainder (timer, 100, &Remainder2);
>> + DivS64x64Remainder (timer, 400, &Remainder3);
>> +
>> + return (Remainder1 == 0 && (Remainder2 != 0 || Remainder3 == 0));
>> +}
>> +
>> /* Get the system time as seconds elapsed since midnight, January 1, 1970.
>> */
>> // INTN time(
>> // INTN *timer
>> @@ -117,12 +136,13 @@ gmtime (
>> )
>> {
>> struct tm *GmTime;
>> - UINT16 DayNo;
>> - UINT32 DayRemainder;
>> + UINT64 DayNo;
>> + UINT64 DayRemainder;
>> time_t Year;
>> time_t YearNo;
>> - UINT16 TotalDays;
>> - UINT16 MonthNo;
>> + UINT32 TotalDays;
>> + UINT32 MonthNo;
>> + INT64 Remainder;
>>
>> if (timer == NULL) {
>> return NULL;
>> @@ -135,18 +155,21 @@ gmtime (
>>
>> ZeroMem ((VOID *)GmTime, (UINTN)sizeof (struct tm));
>>
>> - DayNo = (UINT16)(*timer / SECSPERDAY);
>> - DayRemainder = (UINT32)(*timer % SECSPERDAY);
>> + DayNo = (UINT64)DivS64x64Remainder (*timer, SECSPERDAY,
>> &Remainder);
>> + DayRemainder = (UINT64)Remainder;
>>
>> - GmTime->tm_sec = (int)(DayRemainder % SECSPERMIN);
>> - GmTime->tm_min = (int)((DayRemainder % SECSPERHOUR) /
>> SECSPERMIN);
>> - GmTime->tm_hour = (int)(DayRemainder / SECSPERHOUR);
>> - GmTime->tm_wday = (int)((DayNo + 4) % 7);
>> + DivS64x64Remainder (DayRemainder, SECSPERMIN, &Remainder);
>> + GmTime->tm_sec = (int)Remainder;
>> + DivS64x64Remainder (DayRemainder, SECSPERHOUR, &Remainder);
>> + GmTime->tm_min = (int)DivS64x64Remainder (Remainder, SECSPERMIN,
>> NULL);
>> + GmTime->tm_hour = (int)DivS64x64Remainder (DayRemainder,
>> SECSPERHOUR, NULL);
>> + DivS64x64Remainder ((DayNo + 4), 7, &Remainder);
>> + GmTime->tm_wday = (int)Remainder;
>>
>> for (Year = 1970, YearNo = 0; DayNo > 0; Year++) {
>> - TotalDays = (UINT16)(IsLeap (Year) ? 366 : 365);
>> + TotalDays = (UINT32)(IsLeap (Year) ? 366 : 365);
>> if (DayNo >= TotalDays) {
>> - DayNo = (UINT16)(DayNo - TotalDays);
>> + DayNo = (UINT64)(DayNo - TotalDays);
>> YearNo++;
>> } else {
>> break;
>> @@ -158,7 +181,7 @@ gmtime (
>>
>> for (MonthNo = 12; MonthNo > 1; MonthNo--) {
>> if (DayNo >= CumulativeDays[IsLeap (Year)][MonthNo]) {
>> - DayNo = (UINT16)(DayNo - (UINT16)(CumulativeDays[IsLeap
>> (Year)][MonthNo]));
>> + DayNo = (UINT64)(DayNo - (UINT32)(CumulativeDays[IsLeap
>> (Year)][MonthNo]));
>> break;
>> }
>> }
>> --
>> 2.20.1.windows.1
>>
>>
>>
>>
>>
>
>
> .
>
next prev parent reply other threads:[~2022-12-01 12:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 9:11 [PATCH EDK2 v1 0/1] CryptoPkg/BaseCryptLib:time overflow wenyi,xie
2022-11-25 9:11 ` [PATCH EDK2 v1 1/1] " wenyi,xie
2022-12-01 8:34 ` [edk2-devel] " Yao, Jiewen
2022-12-01 12:34 ` wenyi,xie [this message]
2022-12-01 13:36 ` Yao, Jiewen
[not found] ` <172CAED90E086CFF.1705@groups.io>
2022-12-01 14:23 ` Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99aa4b4b-5410-c2cf-4668-e28815ff783d@huawei.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox