From: "Pete Batard" <pete@akeo.ie>
To: Leif Lindholm <leif.lindholm@linaro.org>
Cc: devel@edk2.groups.io, ard.biesheuvel@linaro.org, philmd@redhat.com
Subject: Re: [edk2-platforms][PATCH 1/8] Platform/RPi: Add model family detection
Date: Mon, 18 Nov 2019 17:58:05 +0000 [thread overview]
Message-ID: <99b30bf5-a9c6-62aa-f7e2-7db9c2bc9848@akeo.ie> (raw)
In-Reply-To: <20191118175156.GX7323@bivouac.eciton.net>
On 2019.11.18 17:51, Leif Lindholm wrote:
> On Thu, Nov 14, 2019 at 04:07:33PM +0000, Pete Batard wrote:
>> From: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
>>
>> Add GetModelFamily to RASPBERRY_PI_FIRMWARE_PROTOCOL.
>>
>> This uses the board revision to return a numeric value representing
>> the RPi family (1=RPi, 2=RPi2, 3=RPi3 and 4=RPi4).
>>
>> Knowing the Pi family will help us set the SD card routing when we
>> introduce support for the Pi 4 and should also be easier to maintain
>> than if using individual model detection.
>>
>> Also add a missing entry for the "Raspberry Pi Compute Module 3+" in
>> RpiFirmwareGetModelName ().
>
> Can you drop the above line and include the below as 1/? in v2?
Okay.
Note that since you requested alphabetical for PCDs, I'm going to have
an "Also" in 2/ (now 3/) since the existing PCDs in
Platform/RaspberryPi/Library/PlatformLib/PlatformLib.inf are out of
alphabetical order.
I sure hope you're not going to ask me to split this extra reordering
into a separate commit...
Regards,
/Pete
>
> /
> Leif
>
> From 59f01ff36ac7918e9ce166acbd3e963f638ab4b1 Mon Sep 17 00:00:00 2001
> From: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
> Date: Mon, 18 Nov 2019 17:47:06 +0000
> Subject: [PATCH edk2-platforms 1/1] Platform/RPi: Add missing model name
>
> add a missing entry for the "Raspberry Pi Compute Module 3+" in
> RpiFirmwareGetModelName ().
>
> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> index 9b4aa068857c..dcb434fabefe 100644
> --- a/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> +++ b/Platform/RaspberryPi/Drivers/RpiFirmwareDxe/RpiFirmwareDxe.c
> @@ -1,5 +1,6 @@
> /** @file
> *
> + * Copyright (c) 2019, ARM Limited. All rights reserved.
> * Copyright (c) 2017-2018, Andrei Warkentin <andrey.warkentin@gmail.com>
> * Copyright (c) 2016, Linaro, Ltd. All rights reserved.
> *
> @@ -595,6 +596,8 @@ RpiFirmwareGetModelName (
> return "Raspberry Pi 3 Model B+";
> case 0x0E:
> return "Raspberry Pi 3 Model A+";
> + case 0x10:
> + return "Raspberry Pi Compute Module 3+";
> case 0x11:
> return "Raspberry Pi 4 Model B";
> default:
>
next prev parent reply other threads:[~2019-11-18 17:58 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-14 16:07 [edk2-platforms][PATCH 0/8] Platform/RPi: Early Raspberry Pi 4 groundwork Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 1/8] Platform/RPi: Add model family detection Pete Batard
2019-11-14 16:36 ` [edk2-devel] " Michael Brown
2019-11-14 16:55 ` Pete Batard
2019-11-18 17:51 ` Leif Lindholm
2019-11-18 17:58 ` Pete Batard [this message]
2019-11-18 18:05 ` Leif Lindholm
2019-11-18 18:32 ` Pete Batard
2019-11-19 15:07 ` Ard Biesheuvel
2019-11-19 16:30 ` [edk2-devel] " Pete Batard
2019-11-20 10:27 ` Leif Lindholm
2019-11-20 21:50 ` Pete Batard
2019-11-21 8:55 ` Laszlo Ersek
2019-11-21 9:04 ` Laszlo Ersek
2019-11-21 20:02 ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 2/8] Platform/RPi: Replace Bcm283x SoC base register address with a PCD Pete Batard
2019-11-18 16:48 ` Leif Lindholm
2019-11-18 17:19 ` [edk2-devel] " samer.el-haj-mahmoud
2019-11-18 17:26 ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 3/8] Silicon/Broadcom: Add Bcm2711 header Pete Batard
2019-11-18 16:50 ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 4/8] Platform/RPi: Read more variables from VideoCore during early init Pete Batard
2019-11-18 17:11 ` Leif Lindholm
2019-11-14 16:07 ` [edk2-platforms][PATCH 5/8] Platform/RPi: Clean up and improve early memory init Pete Batard
2019-11-18 17:20 ` Leif Lindholm
2019-11-18 17:34 ` Pete Batard
2019-11-18 17:38 ` Leif Lindholm
2019-11-18 17:40 ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 6/8] Platform/RPi: Replace Mailbox and Watchdog addresses with PCDs Pete Batard
2019-11-18 11:13 ` Philippe Mathieu-Daudé
2019-11-18 13:32 ` Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 7/8] Platform/RPi: Replace MMCHS1BASE define with a PCD Pete Batard
2019-11-14 16:07 ` [edk2-platforms][PATCH 8/8] Platform/RPi: Replace DW2_USB_BASE_ADDRESS " Pete Batard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=99b30bf5-a9c6-62aa-f7e2-7db9c2bc9848@akeo.ie \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox