Got it! Thanks for your reply.

But you should still poll the B_GSTS_REG_TE bit, not the B_GSTS_REG_RTPS bit, in the judgement code of while() loop.

After & operation between Reg32 and B_GSTS_REG_RTPS, the status of B_GSTS_REG_TE will be lost.

 

A more tedious but more reliable operation sequence is recommended in Vt-d specification 2.4 below:

 

to update a bit field in this register at offset X with value of Y, software

must follow below steps:

1. Tmp = Read GSTS_REG

2. Status = (Tmp & 96FFFFFFh) // Reset the one-shot bits

3. Command = (Status | (Y << X))

4. Write Command to GCMD_REG

5. Wait until GSTS_REG[X] indicates command is serviced.

 

Good question, my understanding is setting B_GMCD_REG_SRTP(BIT30) ONLY also means clearing B_GMCD_REG_TE (BIT31).

 

Thanks,

Star

 

Hi Star,

         I'am so interested in DMA protection in UEFI. It's a really good design!

         But I have a question about the implemention of DisableDmar() in IntelSiliconPkg\feature\vtd\intelvtddxe\VtdReg.c

         Is it a typing error in the code segment below?

 

    //

    // Disable VTd

    //

    MmioWrite32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GCMD_REG, B_GMCD_REG_SRTP);

    do {

      Reg32 = MmioRead32 (mVtdUnitInformation[Index].VtdUnitBaseAddress + R_GSTS_REG);

} while((Reg32 & B_GSTS_REG_RTPS) == 0);

 

The software should program the B_GMCD_REG_TE field in global command register and then poll the B_GSTS_REG_TE field in global status register if the DMAR is expected to be disabled or enabled according to Vt-d specification.

 

Thanks

Jerry Zhou

Ext:892418

 

 

 

-----邮件原件-----
发件人: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] 代表 Star Zeng
发送时间: 2018年10月24日 11:32
收件人: edk2-devel@lists.01.org
抄送: Jiewen Yao; Star Zeng
主题: [edk2] [PATCH] IntelSiliconPkg VTdDxe: Option to force no early access attr request

 

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1272

 

To have high confidence in usage for platform, add option (BIT2 of

PcdVTdPolicyPropertyMask) to force no IOMMU access attribute request

recording before DMAR table is installed.

 

Check PcdVTdPolicyPropertyMask BIT2 before RequestAccessAttribute()

and ProcessRequestedAccessAttribute(), then RequestAccessAttribute(),

ProcessRequestedAccessAttribute() and mAccessRequestXXX variables

could be optimized by compiler when PcdVTdPolicyPropertyMask BIT2 = 1.

 

Test done:

1: Created case that has IOMMU access attribute request before DMAR

   table is installed, ASSERT was triggered after setting

   PcdVTdPolicyPropertyMask BIT2 to 1.

 

2. Confirmed RequestAccessAttribute(), ProcessRequestedAccessAttribute()

   and mAccessRequestXXX variables were optimized by compiler after

   setting PcdVTdPolicyPropertyMask BIT2 to 1.

 

Cc: Jiewen Yao <jiewen.yao@intel.com>

Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>

Contributed-under: TianoCore Contribution Agreement 1.1

Signed-off-by: Star Zeng <star.zeng@intel.com>

---

IntelSiliconPkg/Feature/VTd/IntelVTdDxe/DmaProtection.c | 8 +++++++-

IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.c   | 7 +++++++

IntelSiliconPkg/IntelSiliconPkg.dec                     | 1 +

3 files changed, 15 insertions(+), 1 deletion(-)

 

diff --git a/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/DmaProtection.c b/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/DmaProtection.c

index 86d50eb6f288..7784545631b3 100644

--- a/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/DmaProtection.c

+++ b/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/DmaProtection.c

@@ -515,7 +515,13 @@ SetupVtd (

 

   ParseDmarAcpiTableRmrr ();

 

-  ProcessRequestedAccessAttribute ();

+  if ((PcdGet8 (PcdVTdPolicyPropertyMask) & BIT2) == 0) {

+    //

+    // Support IOMMU access attribute request recording before DMAR table is installed.

+    // Here is to process the requests.

+    //

+    ProcessRequestedAccessAttribute ();

+  }

 

   for (Index = 0; Index < mVtdUnitNumber; Index++) {

     DEBUG ((DEBUG_INFO,"VTD Unit %d (Segment: %04x)\n", Index, mVtdUnitInformation[Index].Segment));

diff --git a/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.c b/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.c

index 25d7c80af1d4..09948ce50e94 100644

--- a/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.c

+++ b/IntelSiliconPkg/Feature/VTd/IntelVTdDxe/IntelVTdDxe.c

@@ -254,6 +254,13 @@ VTdSetAttribute (

     // Record the entry to driver global variable.

     // As such once VTd is activated, the setting can be adopted.

     //

+    if ((PcdGet8 (PcdVTdPolicyPropertyMask) & BIT2) != 0) {

+      //

+      // Force no IOMMU access attribute request recording before DMAR table is installed.

+      //

+      ASSERT_EFI_ERROR (EFI_NOT_READY);

+      return EFI_NOT_READY;

+    }

     Status = RequestAccessAttribute (Segment, SourceId, DeviceAddress, Length, IoMmuAccess);

   } else {

     PERF_CODE (

diff --git a/IntelSiliconPkg/IntelSiliconPkg.dec b/IntelSiliconPkg/IntelSiliconPkg.dec

index b9646d773b95..900e8f63c64d 100644

--- a/IntelSiliconPkg/IntelSiliconPkg.dec

+++ b/IntelSiliconPkg/IntelSiliconPkg.dec

@@ -64,6 +64,7 @@ [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]

   ## The mask is used to control VTd behavior.<BR><BR>

   #  BIT0: Enable IOMMU during boot (If DMAR table is installed in DXE. If VTD_INFO_PPI is installed in PEI.)

   #  BIT1: Enable IOMMU when transfer control to OS (ExitBootService in normal boot. EndOfPEI in S3)

+  #  BIT2: Force no IOMMU access attribute request recording before DMAR table is installed.

   # @Prompt The policy for VTd driver behavior.

   gIntelSiliconPkgTokenSpaceGuid.PcdVTdPolicyPropertyMask|1|UINT8|0x00000002

 

--

2.7.0.windows.1

 

_______________________________________________

edk2-devel mailing list

edk2-devel@lists.01.org

https://lists.01.org/mailman/listinfo/edk2-devel

 

This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or forwarding of this email or the content of this email is strictly prohibited.