[PATCH v6 8/8] OvmfPkg: CloudHv: Add README

["Boeuf, Sebastien" <sebastien.boeuf@intel.com>]

From: Sebastien Boeuf <sebastien.boeuf@intel.com>

Add some documentation to the CloudHv target in order to clarify how to
use it and what to expect from it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
---
 OvmfPkg/CloudHv/README | 67 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 OvmfPkg/CloudHv/README

diff --git a/OvmfPkg/CloudHv/README b/OvmfPkg/CloudHv/README
new file mode 100644
index 0000000000..63e28860e0
--- /dev/null
+++ b/OvmfPkg/CloudHv/README
@@ -0,0 +1,67 @@
+
+CloudHv is a port of OVMF for the Cloud Hypervisor project.
+
+The Cloud Hypervisor project
+----------------------------
+
+Cloud Hypervisor is a Virtual Machine Monitor that runs on top of KVM. The
+project focuses on exclusively running modern, cloud workloads, on top of a
+limited set of hardware architectures and platforms. Cloud workloads refers to
+those that are usually run by customers inside a cloud provider. This means
+modern operating systems with most I/O handled by paravirtualised devices
+(i.e. virtio), no requirement for legacy devices, and 64-bit CPUs.
+
+https://github.com/cloud-hypervisor/cloud-hypervisor
+
+Design
+------
+
+Based on Cloud Hypervisor's motto to reduce the emulation as much as possible,
+the project logically decided to support the PVH boot specification as the only
+way of booting virtual machines. That includes both direct kernel boot and OVMF
+firmware which must be generated as PVH ELF binaries.
+PVH allows information like location of ACPI tables and location of guest RAM
+ranges to be shared without the need of an extra emulated device like a CMOS.
+
+Features
+--------
+
+* Serial console
+* EFI shell
+* virtio-pci
+
+Build
+-----
+
+The way to build the CloudHv target is as follows:
+
+OvmfPkg/build.sh -p OvmfPkg/CloudHv/CloudHvX64.dsc -a X64 -b DEBUG
+
+Usage
+-----
+
+Assuming Cloud Hypervisor is already built, one can start a virtual machine as
+follows:
+
+./cloud-hypervisor \
+    --cpus boot=1 \
+    --memory size=1G \
+    --kernel Build/CloudHvX64/DEBUG_GCC5/FV/CLOUDHV.fd \
+    --disk path=/path/to/disk.raw
+
+Releases
+--------
+
+In edk2-stable202202, CloudHv is generated as data-only binary.
+Starting with edk2-stable202205, CloudHv is generated as a PVH ELF binary to
+reduce the amount of emulation needed from Cloud Hypervisor.
+For TDX, things are handled differently and PVH is not used, which is why the
+firmware is always generated as a data-only binary.
+
++-------------------+----------------+
+|                   |    CloudHv     |
++-------------------+----------------+
+| edk2-stable202202 | Data binary    |
++-------------------+----------------+
+| edk2-stable202205 | PVH ELF binary |
++-------------------+----------------+
-- 
2.32.0

---------------------------------------------------------------------
Intel Corporation SAS (French simplified joint stock company)
Registered headquarters: "Les Montalets"- 2, rue de Paris, 
92196 Meudon Cedex, France
Registration Number:  302 456 199 R.C.S. NANTERRE
Capital: 4,572,000 Euros

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.