Re: [PATCH 3/3] ArmVirtPkg/FdtClientDxe: make DT table installation !ACPI dependent

[Laszlo Ersek <lersek@redhat.com>]

On 03/11/17 08:30, Ard Biesheuvel wrote:
> 
>> On 11 Mar 2017, at 08:21, Laszlo Ersek <lersek@redhat.com> wrote:
>>
>>> On 03/11/17 06:55, Laszlo Ersek wrote:
>>>> On 03/09/17 17:04, Ard Biesheuvel wrote:
>>>> Instead of having a build time switch to prevent the FDT configuration
>>>> table from being installed, make this behavior dependent on whether we
>>>> are passing ACPI tables to the OS. This is done by looking for the
>>>> ACPI 2.0 configuration table, and only installing the FDT one if the
>>>> ACPI one cannot be found.
>>>>
>>>> Contributed-under: TianoCore Contribution Agreement 1.0
>>>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>>>> ---
>>>> ArmVirtPkg/ArmVirtPkg.dec                | 10 ----------
>>>> ArmVirtPkg/ArmVirtQemu.dsc               |  5 -----
>>>> ArmVirtPkg/FdtClientDxe/FdtClientDxe.c   | 15 ++++++++++-----
>>>> ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf |  5 ++---
>>>> 4 files changed, 12 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/ArmVirtPkg/ArmVirtPkg.dec b/ArmVirtPkg/ArmVirtPkg.dec
>>>> index a5ec42166445..efe83a383d55 100644
>>>> --- a/ArmVirtPkg/ArmVirtPkg.dec
>>>> +++ b/ArmVirtPkg/ArmVirtPkg.dec
>>>> @@ -58,13 +58,3 @@ [PcdsFixedAtBuild, PcdsPatchableInModule]
>>>>   # EFI_VT_100_GUID.
>>>>   #
>>>>   gArmVirtTokenSpaceGuid.PcdTerminalTypeGuidBuffer|{0x65, 0x60, 0xA6, 0xDF, 0x19, 0xB4, 0xD3, 0x11, 0x9A, 0x2D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D}|VOID*|0x00000007
>>>> -
>>>> -[PcdsFeatureFlag]
>>>> -  #
>>>> -  # Pure ACPI boot
>>>> -  #
>>>> -  # Inhibit installation of the FDT as a configuration table if this feature
>>>> -  # PCD is TRUE. Otherwise, the OS is presented with both a DT and an ACPI
>>>> -  # description of the platform, and it is up to the OS to choose.
>>>> -  #
>>>> -  gArmVirtTokenSpaceGuid.PcdPureAcpiBoot|FALSE|BOOLEAN|0x0000000a
>>>> diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
>>>> index 477dfdcfc764..7b266b98b949 100644
>>>> --- a/ArmVirtPkg/ArmVirtQemu.dsc
>>>> +++ b/ArmVirtPkg/ArmVirtQemu.dsc
>>>> @@ -34,7 +34,6 @@ [Defines]
>>>>   # -D FLAG=VALUE
>>>>   #
>>>>   DEFINE SECURE_BOOT_ENABLE      = FALSE
>>>> -  DEFINE PURE_ACPI_BOOT_ENABLE   = FALSE
>>>>
>>>> !include ArmVirtPkg/ArmVirt.dsc.inc
>>>>
>>>> @@ -94,10 +93,6 @@ [PcdsFeatureFlag.common]
>>>>   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
>>>>   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
>>>>
>>>> -!if $(PURE_ACPI_BOOT_ENABLE) == TRUE
>>>> -  gArmVirtTokenSpaceGuid.PcdPureAcpiBoot|TRUE
>>>> -!endif
>>>> -
>>>> [PcdsFixedAtBuild.common]
>>>>   gArmPlatformTokenSpaceGuid.PcdCoreCount|1
>>>> !if $(ARCH) == AARCH64
>>>> diff --git a/ArmVirtPkg/FdtClientDxe/FdtClientDxe.c b/ArmVirtPkg/FdtClientDxe/FdtClientDxe.c
>>>> index 0327af5739f2..2981977f3d20 100644
>>>> --- a/ArmVirtPkg/FdtClientDxe/FdtClientDxe.c
>>>> +++ b/ArmVirtPkg/FdtClientDxe/FdtClientDxe.c
>>>> @@ -17,6 +17,7 @@
>>>> #include <Library/DebugLib.h>
>>>> #include <Library/UefiDriverEntryPoint.h>
>>>> #include <Library/UefiBootServicesTableLib.h>
>>>> +#include <Library/UefiLib.h>
>>>> #include <Library/HobLib.h>
>>>> #include <libfdt.h>
>>>>
>>>> @@ -312,12 +313,16 @@ OnReadyToBoot (
>>>>   )
>>>> {
>>>>   EFI_STATUS      Status;
>>>> +  VOID            *Table;
>>>>
>>>> -  if (!FeaturePcdGet (PcdPureAcpiBoot)) {
>>>> -    //
>>>> -    // Only install the FDT as a configuration table if we want to leave it up
>>>> -    // to the OS to decide whether it prefers ACPI over DT.
>>>> -    //
>>>> +  //
>>>> +  // Only install the FDT as a configuration table if we are not exposing
>>>> +  // ACPI 2.0 (or later) tables. Note that the legacy ACPI table GUID has
>>>> +  // no meaning on ARM since we need at least ACPI 5.0 support, and the
>>>> +  // 64-bit ACPI 2.0 table GUID is mandatory in that case.
>>>> +  //
>>>> +  Status = EfiGetSystemConfigurationTable (&gEfiAcpi20TableGuid, &Table);
>>>> +  if (EFI_ERROR (Status) || Table == NULL) {
>>>>     Status = gBS->InstallConfigurationTable (&gFdtTableGuid, mDeviceTreeBase);
>>>>     ASSERT_EFI_ERROR (Status);
>>>>   }
>>>
>>> This code breaks the DT-only ("-no-acpi") boot with boot graphics
>>> (virtio-gpu) enabled.
>>>
>>> Namely, we recently included BootGraphicsResourceTableDxe in the build.
>>> That driver calls InstallAcpiTable() for BGRT, which in turn causes
>>> AcpiTableDxe to call InstallConfigurationTable(), via PublishTables().
>>>
>>> We all missed that just because QEMU doesn't produce ACPI payload (and
>>> we consequently don't install it), other drivers in edk2 may
>>> unconditionally install "auxiliary" ACPI tables, which minimally trigger
>>> the presence of the RSD PTR, RSDT and XSDT, and prevent DT installation.
>>> Such a crippled set of ACPI tables isn't sufficient for booting however.
>>>
>>> We have functions like FindAcpiFacsTableByAcpiGuid(), ScanTableInXSDT()
>>> and ScanTableInRSDT() in
>>> "MdeModulePkg/Universal/Acpi/S3SaveStateDxe/AcpiS3ContextSave.c". I
>>> think the above check should be reworked to look for the FADT
>>> (EFI_ACPI_2_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE) with code lifted
>>> from these helper functions. No driver outside of
>>> QemuFwCfgAcpiPlatformDxe will install the FADT. And, the FADT will
>>> always be part of QEMU's ACPI payload, if it generates one.
>>
>> ... BTW this is exactly the kind of hard-to-predict unreliability of
>> ReadyToBoot callbacks that I was worried about. The patches that I
>> posted looked for the "etc/table-loader" fw_cfg file, which directly
>> corresponds to the absence of the "-no-acpi" switch. With a ReadyToBoot
>> callback, we depend on a larger, and fuzzier, pile of state.
>>
>> I'm not suggesting that we return to my series -- I think this one can
>> be fixed up by looking for the FADT in particular --, I'd just like if
>> we all grew a healthy aversion and distrust to ReadyToBoot callbacks.
>> Their perceived simplicity is deceptive.
>>
> 
> Point taken. But couldn't we still check the existence of that at ReadyToBoot?

We could, but that would bring back the new INF file for QemuFwCfgLib,
and the explicit constructor call in FdtClientDxe (assuming we continue
to register the callback in FdtClientDxe -- I think it does belong there).

So that would be worst of both worlds.

Laszlo

> 
>>
>>>
>>>> diff --git a/ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf b/ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
>>>> index 00017727c32c..9861f41e968b 100644
>>>> --- a/ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
>>>> +++ b/ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
>>>> @@ -37,17 +37,16 @@ [LibraryClasses]
>>>>   HobLib
>>>>   UefiBootServicesTableLib
>>>>   UefiDriverEntryPoint
>>>> +  UefiLib
>>>>
>>>> [Protocols]
>>>>   gFdtClientProtocolGuid                  ## PRODUCES
>>>>
>>>> [Guids]
>>>> +  gEfiAcpi20TableGuid
>>>>   gEfiEventReadyToBootGuid
>>>>   gFdtHobGuid
>>>>   gFdtTableGuid
>>>>
>>>> -[FeaturePcd]
>>>> -  gArmVirtTokenSpaceGuid.PcdPureAcpiBoot
>>>> -
>>>> [Depex]
>>>>   TRUE
>>>>
>>>
>>> _______________________________________________
>>> edk2-devel mailing list
>>> edk2-devel@lists.01.org
>>> https://lists.01.org/mailman/listinfo/edk2-devel
>>>
>>