Re: [Patch 0/2] Add IPv6 support condition check for HTTP/ISCSI.

[Karunakar P <karunakarp@amiindia.co.in>]

Not sure that previous mail was delivered, Hence resending the same Mail.

Thanks,
Karunakar

-----Original Message-----
From: Karunakar P 
Sent: Tuesday, October 17, 2017 3:43 PM
To: 'Wu, Jiaxin'; edk2-devel@lists.01.org
Cc: Ye, Ting; Fu, Siyuan
Subject: RE: [edk2] [Patch 0/2] Add IPv6 support condition check for HTTP/ISCSI.

Hi Jiaxin,

I Reviewed the changes for 3 features/Bugs and verified the same, Please find my below comments and issues faced 

A. Display InitiatorInfo in attempt page even DHCP enabled
------------------------------------------------------------------------------------------------------------------------------------------
1. I applied IScsiConfigVfr.vfr  changes and as well IScsiMisc.c changes 2. It displays initiator info properly when it's Enabled for DHCP 3. But, I found some different behavior in below case
    a. Add  an Attempt (Attempt1  -> Initiator Info Enabled for DHCP)
    b. On reboot iSCSI  attempt was success and Initiator Details shown properly ==> This is as expected
    c. Edit the same Attempt1 details to IP6 and save changes and reset
    d. Now Iscsi connection with IP6   ==> This is as Expected
    e. Now if we again Change the Attempt1 to IP4, It is Displaying Subnet Mask ==> I guess we are not clearing It
    
  I guess we need to do ZeroMem for initiator details before.
 

B. [Patch 2/2] NetworkPkg/IScsiDxe: Add IPv6 support condition check.
-----------------------------------------------------------------------------------------------------------------------------------------
-> This changes looks similar whatever I attached in Bugzilla, and 
-> verified the same with off board card witch doesn't support IP6 It works fine, I didn't find any issues on it.


C. [Patch 1/2] NetworkPkg/HttpBootDxe: Add IPv6 support condition check.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
I found some issues in this changes, please find my below comments 1. HttpBootCheckIpv6Support() function definition and function call parameter differs , To correct this I've done 1 insertion(+), 1 deletion(-) like below ...
+HttpBootCheckIpv6Support (
+  IN  EFI_HANDLE                   ControllerHandle,
+  IN  HTTP_BOOT_PRIVATE_DATA       *Private,
+  OUT BOOLEAN                      *Ipv6Support
+  )
...
+  // Set IPv6 available flag.
+  //
+  Status = HttpBootCheckIpv6Support (ControllerHandle,
-This->DriverBindingHandle, &Ipv6Available);
+Private, &Ipv6Available);
...

2. With the above changes I've verified with Off board card which doesn't support IP6, But I'm facing below ASSERT
(324): CR has Bad Signature

EFI_STATUS
EFIAPI
HttpBootIp4DxeDriverBindingStart (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   ControllerHandle,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath OPTIONAL
  )
{
...
  if (!EFI_ERROR (Status)) {
    Private = HTTP_BOOT_PRIVATE_DATA_FROM_ID(Id);               // ASSERTs here
  } else {
.....

3. I would like add some points and info about the this ASSERT, which I've found The ASSERT is happening because of FreePool (Private), mentioned exact line no below

EFI_STATUS
EFIAPI
HttpBootIp6DxeDriverBindingStart (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   ControllerHandle,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath OPTIONAL
  )
{
...
  Status = gBS->InstallProtocolInterface (
                    &ControllerHandle,
                    &gEfiCallerIdGuid,
                    EFI_NATIVE_INTERFACE,
                    &Private->Id
                    );
    if (EFI_ERROR (Status)) {
      goto ON_ERROR;
    }
      
  }
  +
+  //
+  // Set IPv6 available flag.
+  //
+  Status = HttpBootCheckIpv6Support (ControllerHandle,
-This->DriverBindingHandle, &Ipv6Available);
+Private, &Ipv6Available);
+  if (EFI_ERROR (Status)) {
+    //
+    // Fail to get the data whether UNDI supports IPv6. 
+	// Set default value to TRUE.
+    //
+    Ipv6Available = TRUE;
+  }
+
+  if (!Ipv6Available) {
+    return EFI_UNSUPPORTED;
+  }
   
   if (Private->Ip6Nic != NULL) {
     //
...

ON_ERROR:

  HttpBootDestroyIp6Children(This, Private);
  HttpBootConfigFormUnload (Private);
  FreePool (Private);                                                                      // If I comment this line ASSERT is not happening

  return Status;
}

4. At your end could you please verify this IP6 Condition check for HTTP 

Please correct if anything is wrong, Thanks for your support


Thank You,
Karunakar

-----Original Message-----
From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
Sent: Tuesday, October 17, 2017 7:32 AM
To: Wu, Jiaxin; edk2-devel@lists.01.org
Cc: Karunakar P; Ye, Ting; Fu, Siyuan
Subject: RE: [edk2] [Patch 0/2] Add IPv6 support condition check for HTTP/ISCSI.

Hello Karunakar,

Base on your original changes attached in Bugzilla 701 (https://bugzilla.tianocore.org/show_bug.cgi?id=710), I created the formal series patches to support the IPv6 condition check for HTTP/ISCSI. 

Please help to review/verify it.

BTW, To review the ISCSI part, please apply the "[Patch v2 0/2] NetworkPkg/IScsiDxe: Display InitiatorInfo correctly" first to avoid any patch conflict.

Thanks,
Jiaxin



> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of 
> Jiaxin Wu
> Sent: Tuesday, October 17, 2017 9:58 AM
> To: edk2-devel@lists.01.org
> Cc: Karunakar P <karunakarp@amiindia.co.in>; Ye, Ting 
> <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Wu, Jiaxin 
> <jiaxin.wu@intel.com>
> Subject: [edk2] [Patch 0/2] Add IPv6 support condition check for HTTP/ISCSI.
> 
> Base on the request of
> https://bugzilla.tianocore.org/show_bug.cgi?id=710,
> we provide this patch to IPv6 condition check by leveraging AIP Protocol.
> 
> Cc: Karunakar P <karunakarp@amiindia.co.in>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
> Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> 
> Jiaxin Wu (2):
>   NetworkPkg/HttpBootDxe: Add IPv6 support condition check.
>   NetworkPkg/IScsiDxe: Add IPv6 support condition check.
> 
>  NetworkPkg/HttpBootDxe/HttpBootDxe.c   | 115
> +++++++++++++++++++++++++++-
>  NetworkPkg/HttpBootDxe/HttpBootDxe.h   |   2 +
>  NetworkPkg/HttpBootDxe/HttpBootDxe.inf |   4 +-
>  NetworkPkg/IScsiDxe/IScsiConfig.c      |  18 +++++
>  NetworkPkg/IScsiDxe/IScsiDriver.c      |   2 +-
>  NetworkPkg/IScsiDxe/IScsiDriver.h      |   1 +
>  NetworkPkg/IScsiDxe/IScsiDxe.inf       |   2 +
>  NetworkPkg/IScsiDxe/IScsiImpl.h        |   1 +
>  NetworkPkg/IScsiDxe/IScsiMisc.c        | 135
> ++++++++++++++++++++++++++++++++-
>  NetworkPkg/IScsiDxe/IScsiMisc.h        |   4 +-
>  10 files changed, 278 insertions(+), 6 deletions(-)
> 
> --
> 1.9.5.msysgit.1
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel