From: "levi.yun" <yeoreum.yun@arm.com>
To: Pedro Falcato <pedro.falcato@gmail.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "zhichao.gao@intel.com" <zhichao.gao@intel.com>,
Sami Mujawar <Sami.Mujawar@arm.com>,
Pierre Gondois <Pierre.Gondois@arm.com>, nd <nd@arm.com>
Subject: Re: [edk2-devel] [PATCH v1 1/1] ShellPkg: Acpivew/GTDT: Print timer flags information.
Date: Fri, 14 Jul 2023 09:04:15 +0000 [thread overview]
Message-ID: <AM0PR08MB42896898BBAE7D342EA7E746FB34A@AM0PR08MB4289.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <CAKbZUD0x+g6mS1+rD9jHirOcsVh3HG6QJ6UUhrVNdwe9RZrheA@mail.gmail.com>
Hi, Pedro
> Nit: AcpiView, not Acpivew
> Nit: information
> typo: trigger mode
Thanks to find out type :)
>>
>> + UINT8 TriggerMode;
>>
>> +
>>
>> + TriggerMode = (*(UINT8 *)Ptr);
> You don't need parenthesis here, nor a cast.
Yes Thanks..!
>
>>
>> +
>>
>> + Print (
>>
>> + L"%s(%d)",
> Personal opinion, but a space between %s and (%d) would look better maybe?
>>
>> + ((TriggerMode) ? L"Edge Trigger" : L"Level Trigger"),
> You don't need parenthesis around TriggerMode either AFAIK (unless
> this is some uncrustify BS).
Yes. I'll remove the parenthesis in around TriggerMode unless script of uncrustify complain.
>
>>
>> + TriggerMode
>>
>> + );
>>
>> +}
>>
>> +
>>
>> +/**
>>
>> + This function prints Polarity information in timer flags.
> polarity (lowercase)
Thanks.
Many Thanks..!
________________________________________
From: Pedro Falcato <pedro.falcato@gmail.com>
Sent: 13 July 2023 15:24
To: devel@edk2.groups.io; Yeo Reum Yun
Cc: zhichao.gao@intel.com; Sami Mujawar; Pierre Gondois
Subject: Re: [edk2-devel] [PATCH v1 1/1] ShellPkg: Acpivew/GTDT: Print timer flags information.
Nit: AcpiView, not Acpivew
On Wed, Jul 12, 2023 at 4:16 PM levi.yun <yeoreum.yun@arm.com> wrote:
>
> Currently, GTDT only prints the value of timer flags in hex.
> This change prints the detail informaiton about Timer flags in GTDT.
Nit: information
>
> before:
> Shell> acpiview -s GTDT
> ...
> Non-Secure EL1 timer FLAGS : 0x2
> Virtual timer GSIV : 0x1B
> Virtual timer FLAGS : 0x2
> ...
>
> after:
> Shell> acpiview -s GTDT
> ...
> Non-Secure EL1 timer FLAGS : 0x2
> Timer Interrupt Mode : Level Trigger(0)
> Timer Interrupt Polarity : Active Low(1)
> Always-on Capability : 0
> Reserved : 0
>
> Virtual timer GSIV : 0x1B
> Virtual timer FLAGS : 0x2
>
> Signed-off-by: levi.yun <yeoreum.yun@arm.com>
> ---
> The changes can be seen at https://github.com/LeviYeoReum/edk2/compare/master...LeviYeoReum:edk2:refs.geads/2711_gtdt_flags_v1
> ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c | 111 +++++++++++++++++---
> 1 file changed, 98 insertions(+), 13 deletions(-)
>
> diff --git a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c
> index e62927098a010a0e1dad8361dcfc6559d32dcebf..0001d4231e88c03fa1e296539e9fbc76eb5dd7e1 100644
> --- a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c
> +++ b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Gtdt/GtdtParser.c
> @@ -84,33 +84,118 @@ ValidateGtFrameNumber (
> }
>
> }
>
>
>
> +/**
>
> + This function prints Triggermode information in timer flags.
typo: trigger mode
>
> +
>
> + @param [in] Format Print format.
>
> + @param [in] Ptr Pointer to the start of the field data.
>
> +**/
>
> +STATIC
>
> +VOID
>
> +EFIAPI
>
> +PrintTimerInterruptMode (
>
> + IN CONST CHAR16 *Format OPTIONAL,
>
> + IN UINT8 *Ptr
>
> + )
>
> +{
>
> + UINT8 TriggerMode;
>
> +
>
> + TriggerMode = (*(UINT8 *)Ptr);
You don't need parenthesis here, nor a cast.
>
> +
>
> + Print (
>
> + L"%s(%d)",
Personal opinion, but a space between %s and (%d) would look better maybe?
>
> + ((TriggerMode) ? L"Edge Trigger" : L"Level Trigger"),
You don't need parenthesis around TriggerMode either AFAIK (unless
this is some uncrustify BS).
>
> + TriggerMode
>
> + );
>
> +}
>
> +
>
> +/**
>
> + This function prints Polarity information in timer flags.
polarity (lowercase)
>
> +
>
> + @param [in] Format Print format.
>
> + @param [in] Ptr Pointer to the start of the field data.
>
> +**/
>
> +STATIC
>
> +VOID
>
> +EFIAPI
>
> +PrintTimerInterruptPolarity (
>
> + IN CONST CHAR16 *Format OPTIONAL,
>
> + IN UINT8 *Ptr
>
> + )
>
> +{
>
> + UINT8 Polarity;
>
> +
>
> + Polarity = (*(UINT8 *)Ptr);
>
> +
>
> + Print (
>
> + L"%s(%d)",
>
> + ((Polarity) ? L"Active Low" : L"Active High"),
>
> + Polarity
>
> + );
Same comments as the above function
>
> +}
>
> +
>
> +/**
>
> + An ACPI_PARSER array describing the Timer Flags Field in GTDT Table.
>
> +**/
>
> +STATIC CONST ACPI_PARSER TimerFlagsParser[] = {
>
> + { L"Timer Interrupt Mode", 1, 0, NULL, PrintTimerInterruptMode, NULL, NULL, NULL },
>
> + { L"Timer Interrupt Polarity", 1, 1, NULL, PrintTimerInterruptPolarity, NULL, NULL, NULL },
>
> + { L"Always-on Capability", 1, 2, L"%d", NULL, NULL, NULL, NULL },
>
> + { L"Reserved", 29, 3, L"%d", NULL, NULL, NULL, NULL },
>
> +};
>
> +
>
> +/**
>
> + This function parses the Timer Flags.
>
> +
>
> + @param [in] Format Print format.
>
> + @param [in] Ptr Pointer to the start of the Timer flags.
>
> + **/
>
> +STATIC
>
> +VOID
>
> +EFIAPI
>
> +DumpTimerFlags (
>
> + IN CONST CHAR16 *Format OPTIONAL,
>
> + IN UINT8 *Ptr
>
> + )
>
> +{
>
> + DumpUint32 (L"0x%x\n", Ptr);
>
> + ParseAcpiBitFields (
>
> + TRUE,
>
> + 2,
>
> + NULL,
>
> + Ptr,
>
> + 4,
>
> + PARSER_PARAMS (TimerFlagsParser)
>
> + );
>
> +}
>
> +
>
> /**
>
> An ACPI_PARSER array describing the ACPI GTDT Table.
>
> **/
>
> STATIC CONST ACPI_PARSER GtdtParser[] = {
>
> PARSE_ACPI_HEADER (&AcpiHdrInfo),
>
> - { L"CntControlBase Physical Address",8, 36, L"0x%lx", NULL, NULL,
>
> + { L"CntControlBase Physical Address",8, 36, L"0x%lx", NULL, NULL,
>
> NULL, NULL },
>
> - { L"Reserved", 4, 44, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Secure EL1 timer GSIV", 4, 48, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Secure EL1 timer FLAGS", 4, 52, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Reserved", 4, 44, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Secure EL1 timer GSIV", 4, 48, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Secure EL1 timer FLAGS", 4, 52, NULL, DumpTimerFlags, NULL,NULL, NULL },
>
>
>
> - { L"Non-Secure EL1 timer GSIV", 4, 56, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Non-Secure EL1 timer FLAGS", 4, 60, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Non-Secure EL1 timer GSIV", 4, 56, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Non-Secure EL1 timer FLAGS", 4, 60, NULL, DumpTimerFlags, NULL,NULL, NULL },
>
>
>
> - { L"Virtual timer GSIV", 4, 64, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Virtual timer FLAGS", 4, 68, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Virtual timer GSIV", 4, 64, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Virtual timer FLAGS", 4, 68, L"0x%x", DumpTimerFlags, NULL,NULL, NULL },
>
>
>
> - { L"Non-Secure EL2 timer GSIV", 4, 72, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Non-Secure EL2 timer FLAGS", 4, 76, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Non-Secure EL2 timer GSIV", 4, 72, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Non-Secure EL2 timer FLAGS", 4, 76, L"0x%x", DumpTimerFlags, NULL,NULL, NULL },
>
>
>
> - { L"CntReadBase Physical address", 8, 80, L"0x%lx", NULL, NULL,NULL, NULL },
>
> + { L"CntReadBase Physical address", 8, 80, L"0x%lx", NULL, NULL,NULL, NULL },
>
> { L"Platform Timer Count", 4, 88, L"%d", NULL,
>
> (VOID **)&GtdtPlatformTimerCount, NULL, NULL },
>
> { L"Platform Timer Offset", 4, 92, L"0x%x", NULL,
>
> (VOID **)&GtdtPlatformTimerOffset,NULL, NULL },
>
> - { L"Virtual EL2 Timer GSIV", 4, 96, L"0x%x", NULL, NULL,NULL, NULL },
>
> - { L"Virtual EL2 Timer Flags", 4, 100, L"0x%x", NULL, NULL,NULL, NULL }
>
> + { L"Virtual EL2 Timer GSIV", 4, 96, L"0x%x", NULL, NULL,NULL, NULL },
>
> + { L"Virtual EL2 Timer Flags", 4, 100, L"0x%x", NULL, NULL,NULL, NULL }
>
> };
>
>
>
> /**
>
> --
> Guid("CE165669-3EF3-493F-B85D-6190EE5B9759")
> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
>
>
>
>
>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
prev parent reply other threads:[~2023-07-14 9:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-12 11:44 [PATCH v1 1/1] ShellPkg: Acpivew/GTDT: Print timer flags information yeoreum.yun
2023-07-13 7:11 ` PierreGondois
2023-07-13 14:24 ` [edk2-devel] " Pedro Falcato
2023-07-14 9:04 ` levi.yun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR08MB42896898BBAE7D342EA7E746FB34A@AM0PR08MB4289.eurprd08.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox