From: "Aditya Angadi" <aditya.angadi@arm.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
Thomas Abraham <thomas.abraham@arm.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>,
"leif@nuviainc.com" <leif@nuviainc.com>
Subject: Re: [edk2-devel] [edk2-platforms][PATCH v4 0/9]Platform/Arm/Sgi: Add platform support for RD-Daniel
Date: Wed, 22 Apr 2020 12:12:28 +0000 [thread overview]
Message-ID: <AM0PR08MB4499344E75CC313272C8D9EEE1D20@AM0PR08MB4499.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <CAJuA9ahnmTcrjyA7uH9Ou_r29HQhyObZAXeTpv-OB5-iZ2oWew@mail.gmail.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Thomas
> Abraham via groups.io
> Sent: 15 April 2020 10:05
> To: devel@edk2.groups.io
> Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>; leif@nuviainc.com; Aditya
> Angadi <Aditya.Angadi@arm.com>
> Subject: Re: [edk2-devel] [edk2-platforms][PATCH v4 0/9]Platform/Arm/Sgi:
> Add platform support for RD-Daniel
>
> On Tue, Apr 14, 2020 at 6:22 PM Aditya Angadi <aditya.angadi@arm.com>
> wrote:
> >
> > This patch series adds support for Arm's RD-Daniel platform. There are
> > two configurations of this platform being added in this series -
> > Config-M and Config-XLR. RD-Daniel is the next Arm's reference design
> subsystem.
> > Config XLR is a multi chip platform.
> >
> > The first four patches consolidate the code in SgiPkg in preparation
> > for adding support for numa memory nodes and the RD-Daniel platform.
> > The next four patches add support for the RD-Daniel platforms and the
> > last patch adds SRAT table for dual chip RdN1Edge platform.
> >
> >
> > Aditya Angadi (6):
> > Platform/ARM/Sgi: Move the GIC related ACPI helper macros
> > Platform/ARM/Sgi: Move common platform description to SSDT
> > Platform/ARM/Sgi: Add ACPI tables for Rd-Daniel Config-M
> > Platform/ARM/Sgi: Add initial support for RD-Daniel Config-M platform
> > Platform/ARM/Sgi: Add ACPI tables for RD-Daniel Config-XLR
> > Platform/ARM/Sgi: Add initial support for RD-Daniel Config-XLR
> > platform
> >
> > Vijayenthiran Subramaniam (3):
> > Platform/ARM/Sgi: Create individual Platform Description File
> > Platform/ARM/Sgi: Add support for remote numa memory nodes
> > Platform/ARM/Sgi: Add SRAT table for RdN1Edge dual-chip platform
>
> For the series:
> Reviewed-by: Thomas Abraham <thomas.abraham@arm.com>
Any other comments to address in this patch series
Thank You
Aditya
>
> >
> > .../SgiPkg/AcpiTables/RdDanielCfgM/Dsdt.asl | 118 +++++++++++++
> > .../SgiPkg/AcpiTables/RdDanielCfgM/Madt.aslc | 141 ++++++++++++++++
> > ...iTables.inf => RdDanielCfgMAcpiTables.inf} | 24 ++-
> > .../SgiPkg/AcpiTables/RdDanielCfgXlr/Dsdt.asl | 125 ++++++++++++++
> > .../AcpiTables/RdDanielCfgXlr/Madt.aslc | 158 ++++++++++++++++++
> > .../AcpiTables/RdDanielCfgXlr/Srat.aslc | 102 +++++++++++
> > .../AcpiTables/RdDanielCfgXlrAcpiTables.inf | 87 ++++++++++
> > .../ARM/SgiPkg/AcpiTables/RdE1Edge/Dsdt.asl | 70 +-------
> > .../ARM/SgiPkg/AcpiTables/RdE1Edge/Madt.aslc | 71 +-------
> > .../SgiPkg/AcpiTables/RdE1EdgeAcpiTables.inf | 5 +-
> > .../ARM/SgiPkg/AcpiTables/RdN1Edge/Dsdt.asl | 69 +-------
> > .../ARM/SgiPkg/AcpiTables/RdN1Edge/Madt.aslc | 68 +-------
> > .../SgiPkg/AcpiTables/RdN1EdgeAcpiTables.inf | 5 +-
> > .../SgiPkg/AcpiTables/RdN1EdgeX2/Madt.aslc | 57 +------
> > .../SgiPkg/AcpiTables/RdN1EdgeX2/Srat.aslc | 90 ++++++++++
> > .../AcpiTables/RdN1EdgeX2AcpiTables.inf | 14 +-
> > .../ARM/SgiPkg/AcpiTables/Sgi575/Madt.aslc | 130 ++++----------
> > .../SgiPkg/AcpiTables/Sgi575AcpiTables.inf | 2 +-
> > .../{RdN1Edge/Dsdt.asl => SsdtRos.asl} | 63 ++-----
> > .../SgiPkg/Drivers/PlatformDxe/PlatformDxe.c | 69 +-------
> > .../Drivers/PlatformDxe/PlatformDxe.inf | 5 +-
> > Platform/ARM/SgiPkg/Include/SgiAcpiHeader.h | 89 +++++++++-
> > Platform/ARM/SgiPkg/Include/SgiPlatform.h | 12 +-
> > .../Library/PlatformLib/PlatformLib.inf | 21 ++-
> > .../Library/PlatformLib/PlatformLibMem.c | 95 ++++++++++-
> > .../ARM/SgiPkg/RdDanielCfgM/RdDanielCfgM.dsc | 51 ++++++
> > .../SgiPkg/RdDanielCfgM/RdDanielCfgM.fdf.inc | 10 ++
> > .../SgiPkg/RdDanielCfgXlr/RdDanielCfgXlr.dsc | 70 ++++++++
> > .../RdDanielCfgXlr/RdDanielCfgXlr.fdf.inc | 10 ++
> > Platform/ARM/SgiPkg/RdE1Edge/RdE1Edge.dsc | 51 ++++++
> > Platform/ARM/SgiPkg/RdE1Edge/RdE1Edge.fdf.inc | 10 ++
> > Platform/ARM/SgiPkg/RdN1Edge/RdN1Edge.dsc | 51 ++++++
> > Platform/ARM/SgiPkg/RdN1Edge/RdN1Edge.fdf.inc | 10 ++
> > Platform/ARM/SgiPkg/RdN1EdgeX2/RdN1EdgeX2.dsc | 60 +++++++
> > .../ARM/SgiPkg/RdN1EdgeX2/RdN1EdgeX2.fdf.inc | 10 ++
> > Platform/ARM/SgiPkg/Sgi575/Sgi575.dsc | 51 ++++++
> > Platform/ARM/SgiPkg/Sgi575/Sgi575.fdf.inc | 10 ++
> > Platform/ARM/SgiPkg/SgiPlatform.dec | 29 +++-
> > .../{SgiPlatform.dsc => SgiPlatform.dsc.inc} | 33 +---
> > Platform/ARM/SgiPkg/SgiPlatform.fdf | 5 +-
> > 40 files changed, 1532 insertions(+), 619 deletions(-) create mode
> > 100644 Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgM/Dsdt.asl
> > create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgM/Madt.aslc
> > copy Platform/ARM/SgiPkg/AcpiTables/{Sgi575AcpiTables.inf =>
> > RdDanielCfgMAcpiTables.inf} (68%) create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgXlr/Dsdt.asl
> > create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgXlr/Madt.aslc
> > create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgXlr/Srat.aslc
> > create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdDanielCfgXlrAcpiTables.inf
> > create mode 100644
> > Platform/ARM/SgiPkg/AcpiTables/RdN1EdgeX2/Srat.aslc
> > copy Platform/ARM/SgiPkg/AcpiTables/{RdN1Edge/Dsdt.asl =>
> > SsdtRos.asl} (58%) create mode 100644
> > Platform/ARM/SgiPkg/RdDanielCfgM/RdDanielCfgM.dsc
> > create mode 100644
> > Platform/ARM/SgiPkg/RdDanielCfgM/RdDanielCfgM.fdf.inc
> > create mode 100644
> > Platform/ARM/SgiPkg/RdDanielCfgXlr/RdDanielCfgXlr.dsc
> > create mode 100644
> > Platform/ARM/SgiPkg/RdDanielCfgXlr/RdDanielCfgXlr.fdf.inc
> > create mode 100644 Platform/ARM/SgiPkg/RdE1Edge/RdE1Edge.dsc
> > create mode 100644 Platform/ARM/SgiPkg/RdE1Edge/RdE1Edge.fdf.inc
> > create mode 100644 Platform/ARM/SgiPkg/RdN1Edge/RdN1Edge.dsc
> > create mode 100644 Platform/ARM/SgiPkg/RdN1Edge/RdN1Edge.fdf.inc
> > create mode 100644 Platform/ARM/SgiPkg/RdN1EdgeX2/RdN1EdgeX2.dsc
> > create mode 100644
> Platform/ARM/SgiPkg/RdN1EdgeX2/RdN1EdgeX2.fdf.inc
> > create mode 100644 Platform/ARM/SgiPkg/Sgi575/Sgi575.dsc
> > create mode 100644 Platform/ARM/SgiPkg/Sgi575/Sgi575.fdf.inc
> > rename Platform/ARM/SgiPkg/{SgiPlatform.dsc => SgiPlatform.dsc.inc}
> > (87%)
> >
> > --
> > 2.17.1
> >
> >
> > ------------
> > Groups.io Links: You receive all messages sent to this group.
> >
> > View/Reply Online (#57334):
> > https://edk2.groups.io/g/devel/message/57334
> > Mute This Topic: https://groups.io/mt/73009389/1785013
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub
> > [ta.omasab@gmail.com]
> > ------------
> >
>
>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
next prev parent reply other threads:[~2020-04-22 12:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-14 12:51 [edk2-platforms][PATCH v4 0/9]Platform/Arm/Sgi: Add platform support for RD-Daniel Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 1/9] Platform/ARM/Sgi: Create individual Platform Description File Aditya Angadi
2020-04-27 11:01 ` [edk2-devel] " Ard Biesheuvel
2020-04-27 14:54 ` Aditya Angadi
2020-04-27 14:55 ` Ard Biesheuvel
2020-05-03 4:49 ` Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 2/9] Platform/ARM/Sgi: Move the GIC related ACPI helper macros Aditya Angadi
2020-04-27 11:04 ` [edk2-devel] " Ard Biesheuvel
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 3/9] Platform/ARM/Sgi: Move common platform description to SSDT Aditya Angadi
2020-04-27 11:06 ` [edk2-devel] " Ard Biesheuvel
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 4/9] Platform/ARM/Sgi: Add support for remote numa memory nodes Aditya Angadi
2020-04-28 12:28 ` [edk2-devel] " Ard Biesheuvel
2020-04-28 13:15 ` Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 5/9] Platform/ARM/Sgi: Add ACPI tables for Rd-Daniel Config-M Aditya Angadi
2020-04-28 12:30 ` Ard Biesheuvel
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 6/9] Platform/ARM/Sgi: Add initial support for RD-Daniel Config-M platform Aditya Angadi
2020-04-28 12:32 ` Ard Biesheuvel
2020-04-28 13:18 ` Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 7/9] Platform/ARM/Sgi: Add ACPI tables for RD-Daniel Config-XLR Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 8/9] Platform/ARM/Sgi: Add initial support for RD-Daniel Config-XLR platform Aditya Angadi
2020-04-14 12:52 ` [edk2-platforms][PATCH v4 9/9] Platform/ARM/Sgi: Add SRAT table for RdN1Edge dual-chip platform Aditya Angadi
2020-04-14 13:50 ` [edk2-devel] [edk2-platforms][PATCH v4 0/9]Platform/Arm/Sgi: Add platform support for RD-Daniel Ard Biesheuvel
2020-04-14 14:17 ` Aditya Angadi
2020-04-15 4:34 ` Thomas Abraham
2020-04-22 12:12 ` Aditya Angadi [this message]
[not found] ` <16082330BC63CB95.30042@groups.io>
2020-04-26 10:12 ` Aditya Angadi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AM0PR08MB4499344E75CC313272C8D9EEE1D20@AM0PR08MB4499.eurprd08.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox