From: "Fu, Siyuan" <siyuan.fu@intel.com>
To: Santhapur Naveen <naveens@amiindia.co.in>,
"Wu, Jiaxin" <jiaxin.wu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Ye, Ting" <ting.ye@intel.com>, "Li, Ruth" <ruth.li@intel.com>
Subject: Re: [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Date: Tue, 18 Oct 2016 02:45:32 +0000 [thread overview]
Message-ID: <B1FF2E9001CE9041BD10B825821D5BC58A82E3E5@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <625A2455CC232F40B0F38F05ACED6D978C2F7B64@VENUS1.in.megatrends.com>
Hi, Naveen
I checked the code and found the IP4 stack is actually doesn't support classless IP address now, the main reason is in the NetLib interface NetGetIpClass() and NetIp4IsUnicast(). These 2 interfaces do not consider the netmask so it won't recognize a classless IP configuration. Almost all other network drivers (IP4, ARP, iSCSI, Mtftp, PXE, TCP, UDP) are using these 2 interfaces so I guess they may have the same problem.
Please help to submit a ticket in tianocore Bugzilla for this issue, thanks.
BestRegards
Fu Siyuan
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Santhapur Naveen
Sent: Friday, October 14, 2016 3:19 PM
To: Wu, Jiaxin <jiaxin.wu@intel.com>; edk2-devel@lists.01.org
Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>
Subject: Re: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Hello Jiaxin,
We've run into one more problem with PXE boot. The PXE boot is not happening when the server tries to assign an IP address whose last octet is zero.
The below is my configuration:
[Server Configuration]
Ipv4 address : 192.168.0.1/16
Netmask: 255.255.0.0
DHCPv4 Scope:
Range: 192.168.0.2 to 192.168.10.10
Netmask: 255.255.0.0
I've observed that in the given address range, if the server tries to allocate any IP address with the last octet as 0 i.e., for instance 192.168.A.0 where A vary from 1 to 10, then the PXE boot fails saying "PXE-E09: Could not allocate I/O buffers."
I agree that the x.y.z.0 and x.y.z.255 are network address any can't be assigned based on the subnet (In this case, 192.168.0.0 and 192.168.255.255). But here, the Netmask is different which expects the IP address x.y.a.0 which is within the range is valid and can be assigned to any client in the network.
I captured Wireshark log and as per it, the D.O.R.A process is finished but the client is sending a Decline packet. I suspect the function NetIp4IsUnicast() has a role to play in this.
Please provide your comments on this.
Best regards,
Naveen
-----Original Message-----
From: Santhapur Naveen
Sent: Friday, September 02, 2016 11:46 AM
To: 'Wu, Jiaxin'; 'edk2-devel@lists.01.org'
Cc: 'Ye, Ting'; 'Fu, Siyuan'
Subject: RE: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Hello Jiaxin,
My sincere apologies for the delayed response.
I've verified the patch from my side and PXE boot is happening successfully even in classless IP network.
May I know whether this will be included in EDK2? If yes, can you please provide any schedule for the same?
Best regards,
Naveen
-----Original Message-----
From: Santhapur Naveen
Sent: Thursday, August 18, 2016 11:14 AM
To: 'Wu, Jiaxin'; edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
Cc: Ye, Ting; Fu, Siyuan; Sivaraman Nainar; Madhan B. Santharam
Subject: RE: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Jiaxin,
We will verify the patch and update you the result.
Thanks,
Naveen
-----Original Message-----
From: Wu, Jiaxin [mailto:jiaxin.wu@intel.com]
Sent: Thursday, August 18, 2016 11:12 AM
To: Santhapur Naveen; Wu, Jiaxin; edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
Cc: Ye, Ting; Fu, Siyuan; Sivaraman Nainar; Madhan B. Santharam
Subject: RE: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive()
Naveen,
Can you help to verify this patch to support the classless IP.
Thanks,
Jiaxin
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Jiaxin Wu
> Sent: Thursday, August 18, 2016 1:39 PM
> To: edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
> Cc: Ye, Ting <ting.ye@intel.com<mailto:ting.ye@intel.com>>; Fu, Siyuan <siyuan.fu@intel.com<mailto:siyuan.fu@intel.com>>;
> Santhapur Naveen <naveens@amiindia.co.in<mailto:naveens@amiindia.co.in>>
> Subject: [edk2] [Patch] MdeModulePkg: Support classless IP for DHCPv4
> TransmitReceive()
>
> The IP address should not be treated as classful one if DHCP options
> contain a classless IP with its true subnet mask. Otherwise, DHCPv4
> TransmitReceive() will failed. This real subnet mask will be parsed
> and recorded in DhcpSb->Netmask. So, we need check it before get the
> IP's corresponding subnet mask.
>
> Cc: Santhapur Naveen <naveens@amiindia.co.in<mailto:naveens@amiindia.co.in>>
> Cc: Ye Ting <ting.ye@intel.com<mailto:ting.ye@intel.com>>
> Cc: Fu Siyuan <siyuan.fu@intel.com<mailto:siyuan.fu@intel.com>>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com<mailto:jiaxin.wu@intel.com>>
> ---
> .../Universal/Network/Dhcp4Dxe/Dhcp4Impl.c | 28 +++++++++++++++-
> ------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> b/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> index 4f491b4..79f7cde 100644
> --- a/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> +++ b/MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Impl.c
> @@ -1,9 +1,9 @@
> /** @file
> This file implement the EFI_DHCP4_PROTOCOL interface.
>
> -Copyright (c) 2006 - 2015, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2006 - 2016, Intel Corporation. All rights
> +reserved.<BR>
> This program and the accompanying materials are licensed and made
> available under the terms and conditions of the BSD License which
> accompanies this distribution. The full text of the license may be
> found at http://opensource.org/licenses/bsd-license.php
>
> @@ -1186,18 +1186,20 @@ Dhcp4InstanceConfigUdpIo (
> IN UDP_IO *UdpIo,
> IN VOID *Context
> )
> {
> DHCP_PROTOCOL *Instance;
> + DHCP_SERVICE *DhcpSb;
> EFI_DHCP4_TRANSMIT_RECEIVE_TOKEN *Token;
> EFI_UDP4_CONFIG_DATA UdpConfigData;
> IP4_ADDR ClientAddr;
> IP4_ADDR Ip;
> INTN Class;
> IP4_ADDR SubnetMask;
>
> Instance = (DHCP_PROTOCOL *) Context;
> + DhcpSb = Instance->Service;
> Token = Instance->Token;
>
> ZeroMem (&UdpConfigData, sizeof (EFI_UDP4_CONFIG_DATA));
>
> UdpConfigData.AcceptBroadcast = TRUE;
> @@ -1206,14 +1208,19 @@ Dhcp4InstanceConfigUdpIo (
> UdpConfigData.DoNotFragment = TRUE;
>
> ClientAddr = EFI_NTOHL (Token->Packet->Dhcp4.Header.ClientAddr);
> Ip = HTONL (ClientAddr);
> CopyMem (&UdpConfigData.StationAddress, &Ip, sizeof
> (EFI_IPv4_ADDRESS));
> -
> - Class = NetGetIpClass (ClientAddr);
> - ASSERT (Class < IP4_ADDR_CLASSE);
> - SubnetMask = gIp4AllMasks[Class << 3];
> +
> + if (DhcpSb->Netmask == 0) {
> + Class = NetGetIpClass (ClientAddr);
> + ASSERT (Class < IP4_ADDR_CLASSE);
> + SubnetMask = gIp4AllMasks[Class << 3]; } else {
> + SubnetMask = DhcpSb->Netmask;
> + }
> +
> Ip = HTONL (SubnetMask);
> CopyMem (&UdpConfigData.SubnetMask, &Ip, sizeof
> (EFI_IPv4_ADDRESS));
>
> if ((Token->ListenPointCount == 0) ||
> (Token->ListenPoints[0].ListenPort
> == 0)) {
> UdpConfigData.StationPort = DHCP_CLIENT_PORT; @@ -1574,16
> +1581,21 @@ EfiDhcp4TransmitReceive (
> EndPoint.RemotePort = DHCP_SERVER_PORT;
> } else {
> EndPoint.RemotePort = Token->RemotePort;
> }
>
> + if (DhcpSb->Netmask == 0) {
> + Class = NetGetIpClass (ClientAddr);
> + ASSERT (Class < IP4_ADDR_CLASSE);
> + SubnetMask = gIp4AllMasks[Class << 3]; } else {
> + SubnetMask = DhcpSb->Netmask;
> + }
> +
> //
> // Get the gateway.
> //
> - Class = NetGetIpClass (ClientAddr);
> - ASSERT (Class < IP4_ADDR_CLASSE);
> - SubnetMask = gIp4AllMasks[Class << 3];
> ZeroMem (&Gateway, sizeof (Gateway));
> if (!IP4_NET_EQUAL (ClientAddr, EndPoint.RemoteAddr.Addr[0],
> SubnetMask)) {
> CopyMem (&Gateway.v4, &Token->GatewayAddress, sizeof
> (EFI_IPv4_ADDRESS));
> Gateway.Addr[0] = NTOHL (Gateway.Addr[0]);
> }
> --
> 1.9.5.msysgit.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
> https://lists.01.org/mailman/listinfo/edk2-devel
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-10-18 2:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 5:38 [Patch] MdeModulePkg: Support classless IP for DHCPv4 TransmitReceive() Jiaxin Wu
2016-08-18 5:41 ` Wu, Jiaxin
2016-08-18 5:43 ` Santhapur Naveen
2016-09-02 6:16 ` Santhapur Naveen
2016-09-06 11:05 ` Wu, Jiaxin
2016-09-06 11:47 ` Santhapur Naveen
2016-10-14 7:18 ` Santhapur Naveen
2016-10-18 2:45 ` Fu, Siyuan [this message]
2016-10-18 6:44 ` Santhapur Naveen
2016-09-06 1:02 ` Fu, Siyuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=B1FF2E9001CE9041BD10B825821D5BC58A82E3E5@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox